diff options
Diffstat (limited to 'software/mpu.old/src/cr_startup_lpc13.c')
| -rw-r--r-- | software/mpu.old/src/cr_startup_lpc13.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/software/mpu.old/src/cr_startup_lpc13.c b/software/mpu.old/src/cr_startup_lpc13.c new file mode 100644 index 0000000..48a9784 --- /dev/null +++ b/software/mpu.old/src/cr_startup_lpc13.c @@ -0,0 +1,367 @@ +//*****************************************************************************
+// +--+
+// | ++----+
+// +-++ |
+// | |
+// +-+--+ |
+// | +--+--+
+// +----+ Copyright (c) 2009-10 Code Red Technologies Ltd.
+//
+// Microcontroller Startup code for use with Red Suite
+//
+// Software License Agreement
+//
+// The software is owned by Code Red Technologies and/or its suppliers, and is
+// protected under applicable copyright laws. All rights are reserved. Any
+// use in violation of the foregoing restrictions may subject the user to criminal
+// sanctions under applicable laws, as well as to civil liability for the breach
+// of the terms and conditions of this license.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+// USE OF THIS SOFTWARE FOR COMMERCIAL DEVELOPMENT AND/OR EDUCATION IS SUBJECT
+// TO A CURRENT END USER LICENSE AGREEMENT (COMMERCIAL OR EDUCATIONAL) WITH
+// CODE RED TECHNOLOGIES LTD.
+//
+//*****************************************************************************
+#if defined (__cplusplus)
+#ifdef __REDLIB__
+#error Redlib does not support C++
+#else
+//*****************************************************************************
+//
+// The entry point for the C++ library startup
+//
+//*****************************************************************************
+extern "C" {
+ extern void __libc_init_array(void);
+}
+#endif
+#endif
+
+#define WEAK __attribute__ ((weak))
+#define ALIAS(f) __attribute__ ((weak, alias (#f)))
+
+// Code Red - if CMSIS is being used, then SystemInit() routine
+// will be called by startup code rather than in application's main()
+#if defined (__USE_CMSIS)
+#include "system_LPC13xx.h"
+#endif
+
+//*****************************************************************************
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+//*****************************************************************************
+//
+// Forward declaration of the default handlers. These are aliased.
+// When the application defines a handler (with the same name), this will
+// automatically take precedence over these weak definitions
+//
+//*****************************************************************************
+void ResetISR(void);
+WEAK void NMI_Handler(void);
+WEAK void HardFault_Handler(void);
+WEAK void MemManage_Handler(void);
+WEAK void BusFault_Handler(void);
+WEAK void UsageFault_Handler(void);
+WEAK void SVCall_Handler(void);
+WEAK void DebugMon_Handler(void);
+WEAK void PendSV_Handler(void);
+WEAK void SysTick_Handler(void);
+WEAK void IntDefaultHandler(void);
+//*****************************************************************************
+//
+// Forward declaration of the specific IRQ handlers. These are aliased
+// to the IntDefaultHandler, which is a 'forever' loop. When the application
+// defines a handler (with the same name), this will automatically take
+// precedence over these weak definitions
+//
+//*****************************************************************************
+
+void I2C_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER16_0_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER16_1_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER32_0_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER32_1_IRQHandler(void) ALIAS(IntDefaultHandler);
+void SSP_IRQHandler(void) ALIAS(IntDefaultHandler);
+void UART_IRQHandler(void) ALIAS(IntDefaultHandler);
+void USB_IRQHandler(void) ALIAS(IntDefaultHandler);
+void USB_FIQHandler(void) ALIAS(IntDefaultHandler);
+void ADC_IRQHandler(void) ALIAS(IntDefaultHandler);
+void WDT_IRQHandler(void) ALIAS(IntDefaultHandler);
+void BOD_IRQHandler(void) ALIAS(IntDefaultHandler);
+void FMC_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT3_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT2_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT1_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT0_IRQHandler(void) ALIAS(IntDefaultHandler);
+void WAKEUP_IRQHandler(void) ALIAS(IntDefaultHandler);
+
+extern void xPortSysTickHandler(void);
+extern void xPortPendSVHandler(void);
+extern void vPortSVCHandler( void );
+
+//*****************************************************************************
+//
+// The entry point for the application.
+// __main() is the entry point for Redlib based applications
+// main() is the entry point for Newlib based applications
+//
+//*****************************************************************************
+#if defined (__REDLIB__)
+extern void __main(void);
+#endif
+extern int main(void);
+//*****************************************************************************
+//
+// External declaration for the pointer to the stack top from the Linker Script
+//
+//*****************************************************************************
+extern void _vStackTop(void);
+
+//*****************************************************************************
+#if defined (__cplusplus)
+} // extern "C"
+#endif
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+extern void (* const g_pfnVectors[])(void);
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) = {
+ // Core Level - CM3
+ &_vStackTop, // The initial stack pointer
+ ResetISR, // The reset handler
+ NMI_Handler, // The NMI handler
+ HardFault_Handler, // The hard fault handler
+ MemManage_Handler, // The MPU fault handler
+ BusFault_Handler, // The bus fault handler
+ UsageFault_Handler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ vPortSVCHandler, // SVCall handler
+ DebugMon_Handler, // Debug monitor handler
+ 0, // Reserved
+ xPortPendSVHandler, // The PendSV handler
+ xPortSysTickHandler, // The SysTick handler
+
+
+ // Wakeup sources (40 ea.) for the I/O pins:
+ // PIO0 (0:11)
+ // PIO1 (0:11)
+ // PIO2 (0:11)
+ // PIO3 (0:3)
+ WAKEUP_IRQHandler, // PIO0_0 Wakeup
+ WAKEUP_IRQHandler, // PIO0_1 Wakeup
+ WAKEUP_IRQHandler, // PIO0_2 Wakeup
+ WAKEUP_IRQHandler, // PIO0_3 Wakeup
+ WAKEUP_IRQHandler, // PIO0_4 Wakeup
+ WAKEUP_IRQHandler, // PIO0_5 Wakeup
+ WAKEUP_IRQHandler, // PIO0_6 Wakeup
+ WAKEUP_IRQHandler, // PIO0_7 Wakeup
+ WAKEUP_IRQHandler, // PIO0_8 Wakeup
+ WAKEUP_IRQHandler, // PIO0_9 Wakeup
+ WAKEUP_IRQHandler, // PIO0_10 Wakeup
+ WAKEUP_IRQHandler, // PIO0_11 Wakeup
+
+ WAKEUP_IRQHandler, // PIO1_0 Wakeup
+ WAKEUP_IRQHandler, // PIO1_1 Wakeup
+ WAKEUP_IRQHandler, // PIO1_2 Wakeup
+ WAKEUP_IRQHandler, // PIO1_3 Wakeup
+ WAKEUP_IRQHandler, // PIO1_4 Wakeup
+ WAKEUP_IRQHandler, // PIO1_5 Wakeup
+ WAKEUP_IRQHandler, // PIO1_6 Wakeup
+ WAKEUP_IRQHandler, // PIO1_7 Wakeup
+ WAKEUP_IRQHandler, // PIO1_8 Wakeup
+ WAKEUP_IRQHandler, // PIO1_9 Wakeup
+ WAKEUP_IRQHandler, // PIO1_10 Wakeup
+ WAKEUP_IRQHandler, // PIO1_11 Wakeup
+
+ WAKEUP_IRQHandler, // PIO2_0 Wakeup
+ WAKEUP_IRQHandler, // PIO2_1 Wakeup
+ WAKEUP_IRQHandler, // PIO2_2 Wakeup
+ WAKEUP_IRQHandler, // PIO2_3 Wakeup
+ WAKEUP_IRQHandler, // PIO2_4 Wakeup
+ WAKEUP_IRQHandler, // PIO2_5 Wakeup
+ WAKEUP_IRQHandler, // PIO2_6 Wakeup
+ WAKEUP_IRQHandler, // PIO2_7 Wakeup
+ WAKEUP_IRQHandler, // PIO2_8 Wakeup
+ WAKEUP_IRQHandler, // PIO2_9 Wakeup
+ WAKEUP_IRQHandler, // PIO2_10 Wakeup
+ WAKEUP_IRQHandler, // PIO2_11 Wakeup
+
+ WAKEUP_IRQHandler, // PIO3_0 Wakeup
+ WAKEUP_IRQHandler, // PIO3_1 Wakeup
+ WAKEUP_IRQHandler, // PIO3_2 Wakeup
+ WAKEUP_IRQHandler, // PIO3_3 Wakeup
+
+ I2C_IRQHandler, // I2C0
+ TIMER16_0_IRQHandler, // CT16B0 (16-bit Timer 0)
+ TIMER16_1_IRQHandler, // CT16B1 (16-bit Timer 1)
+ TIMER32_0_IRQHandler, // CT32B0 (32-bit Timer 0)
+ TIMER32_1_IRQHandler, // CT32B1 (32-bit Timer 1)
+ SSP_IRQHandler, // SSP0
+ UART_IRQHandler, // UART0
+
+ USB_IRQHandler, // USB IRQ
+ USB_FIQHandler, // USB FIQ
+
+ ADC_IRQHandler, // ADC (A/D Converter)
+ WDT_IRQHandler, // WDT (Watchdog Timer)
+ BOD_IRQHandler, // BOD (Brownout Detect)
+ FMC_IRQHandler, // Flash (IP2111 Flash Memory Controller)
+ PIOINT3_IRQHandler, // PIO INT3
+ PIOINT2_IRQHandler, // PIO INT2
+ PIOINT1_IRQHandler, // PIO INT1
+ PIOINT0_IRQHandler, // PIO INT0
+
+ };
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern unsigned long _etext;
+extern unsigned long _data;
+extern unsigned long _edata;
+extern unsigned long _bss;
+extern unsigned long _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void) {
+ unsigned long *pulSrc, *pulDest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pulSrc = &_etext;
+ for (pulDest = &_data; pulDest < &_edata;) {
+ *pulDest++ = *pulSrc++;
+ }
+
+ //
+ // Zero fill the bss segment. This is done with inline assembly since this
+ // will clear the value of pulDest if it is not kept in a register.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+#ifdef __USE_CMSIS
+ SystemInit();
+#endif
+
+#if defined (__cplusplus)
+ //
+ // Call C++ library initialisation
+ //
+ __libc_init_array();
+#endif
+
+#if defined (__REDLIB__)
+ // Call the Redlib library, which in turn calls main()
+ __main() ;
+#else
+ main();
+#endif
+ //
+ // main() shouldn't return, but if it does, we'll just enter an infinite loop
+ //
+ while (1) {
+ ;
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+void NMI_Handler(void) {
+ while (1) {
+ }
+}
+
+void HardFault_Handler(void) {
+ while (1) {
+ }
+}
+
+void MemManage_Handler(void) {
+ while (1) {
+ }
+}
+
+void BusFault_Handler(void) {
+ while (1) {
+ }
+}
+
+void UsageFault_Handler(void) {
+ while (1) {
+ }
+}
+
+void SVCall_Handler(void) {
+ while (1) {
+ }
+}
+
+void DebugMon_Handler(void) {
+ while (1) {
+ }
+}
+
+void PendSV_Handler(void) {
+ while (1) {
+ }
+}
+
+void SysTick_Handler(void) {
+ while (1) {
+ }
+}
+
+//*****************************************************************************
+//
+// Processor ends up here if an unexpected interrupt occurs or a handler
+// is not present in the application code.
+//
+//*****************************************************************************
+
+void IntDefaultHandler(void) {
+ //
+ // Go into an infinite loop.
+ //
+ while (1) {
+ }
+}
|