diff options
Diffstat (limited to 'software/mpu.old/inc')
| -rw-r--r-- | software/mpu.old/inc/FreeRTOSConfig.h | 108 | ||||
| -rw-r--r-- | software/mpu.old/inc/Types.h | 45 | ||||
| -rw-r--r-- | software/mpu.old/inc/ssp.h | 112 |
3 files changed, 0 insertions, 265 deletions
diff --git a/software/mpu.old/inc/FreeRTOSConfig.h b/software/mpu.old/inc/FreeRTOSConfig.h deleted file mode 100644 index 5ddf25c..0000000 --- a/software/mpu.old/inc/FreeRTOSConfig.h +++ /dev/null @@ -1,108 +0,0 @@ -/*
- FreeRTOS V6.0.0 - Copyright (C) 2009 Real Time Engineers Ltd.
-
- This file is part of the FreeRTOS distribution.
-
- FreeRTOS is free software; you can redistribute it and/or modify it under
- the terms of the GNU General Public License (version 2) as published by the
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
- ***NOTE*** The exception to the GPL is included to allow you to distribute
- a combined work that includes FreeRTOS without being obliged to provide the
- source code for proprietary components outside of the FreeRTOS kernel.
- FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details. You should have received a copy of the GNU General Public
- License and the FreeRTOS license exception along with FreeRTOS; if not it
- can be viewed here: http://www.freertos.org/a00114.html and also obtained
- by writing to Richard Barry, contact details for whom are available on the
- FreeRTOS WEB site.
-
- 1 tab == 4 spaces!
-
- http://www.FreeRTOS.org - Documentation, latest information, license and
- contact details.
-
- http://www.SafeRTOS.com - A version that is certified for use in safety
- critical systems.
-
- http://www.OpenRTOS.com - Commercial support, development, porting,
- licensing and training services.
-*/
-
-
-/******************************************************************************
- See http://www.freertos.org/a00110.html for an explanation of the
- definitions contained in this file.
-******************************************************************************/
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-#include "LPC13xx.h"
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *----------------------------------------------------------*/
-
-extern unsigned int SystemCoreClock;
-
-#define configUSE_PREEMPTION 1
-#define configUSE_IDLE_HOOK 0
-#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )
-#define configUSE_TICK_HOOK 0
-#define configCPU_CLOCK_HZ ( ( unsigned long ) SystemCoreClock )
-#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
-#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 100 )
-#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2 * 1024 ) )
-#define configMAX_TASK_NAME_LEN ( 12 )
-#define configUSE_TRACE_FACILITY 0
-#define configUSE_16_BIT_TICKS 0
-#define configIDLE_SHOULD_YIELD 0
-#define configUSE_CO_ROUTINES 0
-#define configUSE_MUTEXES 1
-
-#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
-
-#define configUSE_COUNTING_SEMAPHORES 1
-#define configUSE_ALTERNATIVE_API 0
-#define configCHECK_FOR_STACK_OVERFLOW 0
-#define configUSE_RECURSIVE_MUTEXES 0
-#define configQUEUE_REGISTRY_SIZE 0
-#define configGENERATE_RUN_TIME_STATS 0
-#define configUSE_MALLOC_FAILED_HOOK 0
-
-/* Set the following definitions to 1 to include the API function, or zero
-to exclude the API function. */
-
-#define INCLUDE_vTaskPrioritySet 1
-#define INCLUDE_uxTaskPriorityGet 1
-#define INCLUDE_vTaskDelete 1
-#define INCLUDE_vTaskCleanUpResources 0
-#define INCLUDE_vTaskSuspend 1
-#define INCLUDE_vTaskDelayUntil 1
-#define INCLUDE_vTaskDelay 1
-#define INCLUDE_uxTaskGetStackHighWaterMark 0
-
-/* Use the system definition, if there is one */
-#ifdef __NVIC_PRIO_BITS
- #define configPRIO_BITS __NVIC_PRIO_BITS
-#else
- #define configPRIO_BITS 5 /* 32 priority levels */
-#endif
-
-/* The lowest priority. */
-#define configKERNEL_INTERRUPT_PRIORITY ( 31 << (8 - configPRIO_BITS) )
-/* Priority 5, or 160 as only the top three bits are implemented. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << (8 - configPRIO_BITS) )
-
-
-
-#endif /* FREERTOS_CONFIG_H */
-
diff --git a/software/mpu.old/inc/Types.h b/software/mpu.old/inc/Types.h deleted file mode 100644 index 9cb0101..0000000 --- a/software/mpu.old/inc/Types.h +++ /dev/null @@ -1,45 +0,0 @@ -#include "FreeRTOS.h"
-#include "task.h"
-#include "queue.h"
-
-#define MS(ms) portTICK_RATE_MS * (ms)
-
-/* Status_t*/
-typedef enum
-{
- STATUS_OK = 0x0U,
- STATUS_ERROR_INIT,
- STATUS_ERROR_SND,
- STATUS_ERROR_RCV,
- STATUS_ERROR_TIMEOUT
-}Status_t;
-
-/* Sender_t */
-typedef enum
-{
- Sender_Kernel = 0x0,
- Sender_Camera,
- Sender_Spi,
- Sender_LightSens,
- Sender_UART
-}Sender_t;
-
-/* Message_t */
-typedef struct
-{
- void *pData;
- Sender_t Sender;
-}Message_t;
-
-typedef struct
-{
- xQueueHandle hxq_Kernel;
- xQueueHandle hxq_Camera;
- xQueueHandle hxq_LightSens;
-}QH_t;
-
-typedef struct
-{
- xTaskHandle hxTask_Self;
- QH_t QueueHandles;
-}Task_Param_t;
diff --git a/software/mpu.old/inc/ssp.h b/software/mpu.old/inc/ssp.h deleted file mode 100644 index e910a4d..0000000 --- a/software/mpu.old/inc/ssp.h +++ /dev/null @@ -1,112 +0,0 @@ -/*****************************************************************************
- * ssp.h: Header file for NXP LPC134x Family Microprocessors
- *
- * Copyright(C) 2006, NXP Semiconductor
- * All rights reserved.
- *
- * History
- * 2006.07.19 ver 1.00 Preliminary version, first Release
- *
-******************************************************************************/
-#ifndef __SSP_H__
-#define __SSP_H__
-
-/* There are there modes in SSP: loopback, master or slave. */
-/* Here are the combination of all the tests.
-(1) LOOPBACK test: LOOPBACK_MODE=1, TX_RX_ONLY=0, USE_CS=1;
-(2) Serial EEPROM test: LOOPBACK_MODE=0, TX_RX_ONLY=0, USE_CS=0; (default)
-(3) TX(Master) Only: LOOPBACK_MODE=0, SSP_SLAVE=0, TX_RX_ONLY=1, USE_CS=1;
-(4) RX(Slave) Only: LOOPBACK_MODE=0, SSP_SLAVE=1, TX_RX_ONLY=0, USE_CS=1 */
-
-#define LOOPBACK_MODE 1 /* 1 is loopback, 0 is normal operation. */
-#define SSP_SLAVE 0 /* 1 is SLAVE mode, 0 is master mode */
-#define TX_RX_ONLY 0 /* 1 is TX or RX only depending on SSP_SLAVE
- flag, 0 is either loopback mode or communicate
- with a serial EEPROM. */
-
-/* if USE_CS is zero, set SSEL as GPIO that you have total control of the sequence */
-/* When test serial SEEPROM(LOOPBACK_MODE=0, TX_RX_ONLY=0), set USE_CS to 0. */
-/* When LOOPBACK_MODE=1 or TX_RX_ONLY=1, set USE_CS to 1. */
-
-#define USE_CS 1
-#define SSP_DEBUG 0
-
-/* SPI read and write buffer size */
-#define SSP_BUFSIZE 16
-#define FIFOSIZE 8
-
-#define DELAY_COUNT 10
-#define MAX_TIMEOUT 0xFF
-
-/* Port0.2 is the SSP select pin */
-#define SSP0_SEL (1 << 2)
-
-/* SSP Status register */
-#define SSPSR_TFE (1 << 0)
-#define SSPSR_TNF (1 << 1)
-#define SSPSR_RNE (1 << 2)
-#define SSPSR_RFF (1 << 3)
-#define SSPSR_BSY (1 << 4)
-
-/* SSP CR0 register */
-#define SSPCR0_DSS (1 << 0)
-#define SSPCR0_FRF (1 << 4)
-#define SSPCR0_SPO (1 << 6)
-#define SSPCR0_SPH (1 << 7)
-#define SSPCR0_SCR (1 << 8)
-
-/* SSP CR1 register */
-#define SSPCR1_LBM (1 << 0)
-#define SSPCR1_SSE (1 << 1)
-#define SSPCR1_MS (1 << 2)
-#define SSPCR1_SOD (1 << 3)
-
-/* SSP Interrupt Mask Set/Clear register */
-#define SSPIMSC_RORIM (1 << 0)
-#define SSPIMSC_RTIM (1 << 1)
-#define SSPIMSC_RXIM (1 << 2)
-#define SSPIMSC_TXIM (1 << 3)
-
-/* SSP0 Interrupt Status register */
-#define SSPRIS_RORRIS (1 << 0)
-#define SSPRIS_RTRIS (1 << 1)
-#define SSPRIS_RXRIS (1 << 2)
-#define SSPRIS_TXRIS (1 << 3)
-
-/* SSP0 Masked Interrupt register */
-#define SSPMIS_RORMIS (1 << 0)
-#define SSPMIS_RTMIS (1 << 1)
-#define SSPMIS_RXMIS (1 << 2)
-#define SSPMIS_TXMIS (1 << 3)
-
-/* SSP0 Interrupt clear register */
-#define SSPICR_RORIC (1 << 0)
-#define SSPICR_RTIC (1 << 1)
-
-/* ATMEL SEEPROM command set */
-#define WREN 0x06 /* MSB A8 is set to 0, simplifying test */
-#define WRDI 0x04
-#define RDSR 0x05
-#define WRSR 0x01
-#define READ 0x03
-#define WRITE 0x02
-
-/* RDSR status bit definition */
-#define RDSR_RDY 0x01
-#define RDSR_WEN 0x02
-
-/* If RX_INTERRUPT is enabled, the SSP RX will be handled in the ISR
-SSPReceive() will not be needed. */
-extern void SSP_IRQHandler (void);
-extern void SSPInit( void );
-extern void SSPSend( uint8_t *Buf, uint32_t Length );
-extern void SSPReceive( uint8_t *buf, uint32_t Length );
-
-extern uint8_t src_addr[SSP_BUFSIZE];
-extern uint8_t dest_addr[SSP_BUFSIZE];
-extern void LoopbackTest( void );
-#endif /* __SSP_H__ */
-/*****************************************************************************
-** End Of File
-******************************************************************************/
-
|