diff options
Diffstat (limited to 'software/hhd70dongle/readme.txt')
-rw-r--r-- | software/hhd70dongle/readme.txt | 31 |
1 files changed, 0 insertions, 31 deletions
diff --git a/software/hhd70dongle/readme.txt b/software/hhd70dongle/readme.txt deleted file mode 100644 index 58e24b9..0000000 --- a/software/hhd70dongle/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -Commands: - -'S' ... enables GFSK test sending mode -'E' ... enables GFSK test recieving mode -'B' ... enables Beacon-Mode, i.e. device enters OOK (OnOffKeying) mode and periodically enables the carrier for 1000ms and then pauses for 200ms - -S and E can be actived at the same time -B deactivates S and E -S or E deactivate B - -Each use of S,E or B reinitialize C1101 and thus reset all adjustments. - -'R' ... dumps the value of C1101 registers - - -Changing GFSK frequency deviation: -'D' ... increases GFSK frequency deviation -'d' ... decreases GFSK frequency deviation -obviously not much use in Beacon-Mode - - -Using the Beacon Test Mode: -'B' ... reinitializes C1101 and resets frequency to 435.199677, then starts OOK transmission -'?' ... shows current frequency -'#' ... increases frequency by 10 MHz -'_' ... decreases frequency by 10 MHz -'+' ... increases frequency by 1 MHz -'-' ... decreases frequency by 1 MHz -':' ... increases frequency by 100 KHz -'.' ... decreases frequency by 100 KHz -'f' ... sets frequency to previously adjusted valued. e.g. restore frequency after disabling, then reenabling Beacon-Mode 'B' |