1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
|
/* Name: usbconfig.h
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
* Author: Christian Starkjohann
* Creation Date: 2005-04-01
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
*/
#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__
/* ---------------------------- Hardware Config ---------------------------- */
#define USB_CFG_IOPORTNAME B
#define USB_CFG_DMINUS_BIT 3
#define USB_CFG_DPLUS_BIT 4
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
#define USB_CFG_CHECK_CRC 0
/* ----------------------- Optional Hardware Config ------------------------ */
/* #define USB_CFG_PULLUP_IOPORTNAME B */
/* #define USB_CFG_PULLUP_BIT 2 */
/* --------------------------- Functional Range ---------------------------- */
#define USB_CFG_HAVE_INTRIN_ENDPOINT 0
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0
#define USB_CFG_EP3_NUMBER 3
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
#define USB_CFG_IMPLEMENT_HALT 0
#define USB_CFG_SUPPRESS_INTR_CODE 0
#define USB_CFG_INTR_POLL_INTERVAL 10
#define USB_CFG_IS_SELF_POWERED 0
#define USB_CFG_MAX_BUS_POWER 40
#define USB_CFG_IMPLEMENT_FN_WRITE 0
#define USB_CFG_IMPLEMENT_FN_READ 0
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
#define USB_CFG_HAVE_FLOWCONTROL 0
#define USB_CFG_DRIVER_FLASH_PAGE 0
#define USB_CFG_LONG_TRANSFERS 0
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
#define USB_COUNT_SOF 0
/* #ifdef __ASSEMBLER__
* macro myAssemblerMacro
* in YL, TCNT0
* sts timer0Snapshot, YL
* endm
* #endif
* #define USB_SOF_HOOK myAssemblerMacro
*/
#define USB_CFG_CHECK_DATA_TOGGLING 0
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
#define USB_USE_FAST_CRC 0
/* -------------------------- Device Description --------------------------- */
#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
#define USB_CFG_DEVICE_VERSION 0x00, 0x01
#define USB_CFG_VENDOR_NAME 's', 'p', 'r', 'e', 'a', 'd', 's', 'p', 'a', 'c', 'e'
#define USB_CFG_VENDOR_NAME_LEN 11
#define USB_CFG_DEVICE_NAME 'v', 'u', 's', 'b', '-', 'l', 'e', 'd'
#define USB_CFG_DEVICE_NAME_LEN 8
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */
#define USB_CFG_DEVICE_SUBCLASS 0
#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */
#define USB_CFG_INTERFACE_SUBCLASS 0
#define USB_CFG_INTERFACE_PROTOCOL 0
/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 */
/* #define USB_PUBLIC static */
/* ------------------- Fine Control over USB Descriptors ------------------- */
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
#define USB_CFG_DESCR_PROPS_STRINGS 0
#define USB_CFG_DESCR_PROPS_STRING_0 0
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT 0
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
#define usbMsgPtr_t unsigned short
/* ----------------------- Optional MCU Description ------------------------ */
#define USB_INTR_CFG PCMSK
#define USB_INTR_CFG_SET (1 << USB_CFG_DPLUS_BIT)
#define USB_INTR_CFG_CLR 0
#define USB_INTR_ENABLE GIMSK
#define USB_INTR_ENABLE_BIT PCIE
#define USB_INTR_PENDING GIFR
#define USB_INTR_PENDING_BIT PCIF
#define USB_INTR_VECTOR PCINT0_vect
#endif /* __usbconfig_h_included__ */
|
