diff options
Diffstat (limited to 'vusb-led/usbconfig.h')
| -rw-r--r-- | vusb-led/usbconfig.h | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/vusb-led/usbconfig.h b/vusb-led/usbconfig.h new file mode 100644 index 0000000..00f89d2 --- /dev/null +++ b/vusb-led/usbconfig.h @@ -0,0 +1,106 @@ +/* Name: usbconfig.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2005-04-01 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + */ + +#ifndef __usbconfig_h_included__ +#define __usbconfig_h_included__ + + +/* ---------------------------- Hardware Config ---------------------------- */ +#define USB_CFG_IOPORTNAME B +#define USB_CFG_DMINUS_BIT 3 +#define USB_CFG_DPLUS_BIT 4 + +#define USB_CFG_CLOCK_KHZ (F_CPU/1000) +#define USB_CFG_CHECK_CRC 0 + +/* ----------------------- Optional Hardware Config ------------------------ */ + +/* #define USB_CFG_PULLUP_IOPORTNAME B */ +/* #define USB_CFG_PULLUP_BIT 3 */ + +/* --------------------------- Functional Range ---------------------------- */ + +#define USB_CFG_HAVE_INTRIN_ENDPOINT 0 +#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0 +#define USB_CFG_EP3_NUMBER 3 +/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ +#define USB_CFG_IMPLEMENT_HALT 0 +#define USB_CFG_SUPPRESS_INTR_CODE 0 +#define USB_CFG_INTR_POLL_INTERVAL 10 +#define USB_CFG_IS_SELF_POWERED 0 +#define USB_CFG_MAX_BUS_POWER 100 +#define USB_CFG_IMPLEMENT_FN_WRITE 0 +#define USB_CFG_IMPLEMENT_FN_READ 0 +#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 +#define USB_CFG_HAVE_FLOWCONTROL 0 +#define USB_CFG_DRIVER_FLASH_PAGE 0 +#define USB_CFG_LONG_TRANSFERS 0 +/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ +/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ +/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ +#define USB_COUNT_SOF 0 +/* #ifdef __ASSEMBLER__ + * macro myAssemblerMacro + * in YL, TCNT0 + * sts timer0Snapshot, YL + * endm + * #endif + * #define USB_SOF_HOOK myAssemblerMacro + */ +#define USB_CFG_CHECK_DATA_TOGGLING 0 +#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 +#define USB_USE_FAST_CRC 0 + +/* -------------------------- Device Description --------------------------- */ + +#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */ +#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */ +#define USB_CFG_DEVICE_VERSION 0x00, 0x01 +#define USB_CFG_VENDOR_NAME 'o', 'b', 'd', 'e', 'v', '.', 'a', 't' +#define USB_CFG_VENDOR_NAME_LEN 8 +#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e' +#define USB_CFG_DEVICE_NAME_LEN 8 +/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ +/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ +#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */ +#define USB_CFG_DEVICE_SUBCLASS 0 +#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */ +#define USB_CFG_INTERFACE_SUBCLASS 0 +#define USB_CFG_INTERFACE_PROTOCOL 0 +/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 */ +/* #define USB_PUBLIC static */ + +/* ------------------- Fine Control over USB Descriptors ------------------- */ + +#define USB_CFG_DESCR_PROPS_DEVICE 0 +#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 +#define USB_CFG_DESCR_PROPS_STRINGS 0 +#define USB_CFG_DESCR_PROPS_STRING_0 0 +#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_HID 0 +#define USB_CFG_DESCR_PROPS_HID_REPORT 0 +#define USB_CFG_DESCR_PROPS_UNKNOWN 0 + + +#define usbMsgPtr_t unsigned short + +/* ----------------------- Optional MCU Description ------------------------ */ + +/* #define USB_INTR_CFG MCUCR */ +/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE GIMSK */ +/* #define USB_INTR_ENABLE_BIT INT0 */ +/* #define USB_INTR_PENDING GIFR */ +/* #define USB_INTR_PENDING_BIT INTF0 */ +/* #define USB_INTR_VECTOR INT0_vect */ + +#endif /* __usbconfig_h_included__ */ |