OpenPCR-controller

git-svn-id: https://svn.spreadspace.org/avr/trunk@238 aa12f405-d877-488e-9caf-2d797e2a1cc7

4 files changed, 323 insertions, 0 deletions

diff --git a/pcr-controller/Makefile b/pcr-controller/Makefile
new file mode 100644
index 0000000..7a8217f
--- /dev/null
+++ b/pcr-controller/Makefile
@@ -0,0 +1,46 @@
+##

+##  spreadspace avr utils

+##

+##

+##  Copyright (C) 2013 Christian Pointner <equinox@spreadspace.org>

+##

+##  This file is part of spreadspace avr utils.

+##

+##  spreadspace avr utils is free software: you can redistribute it and/or modify

+##  it under the terms of the GNU General Public License as published by

+##  the Free Software Foundation, either version 3 of the License, or

+##  any later version.

+##

+##  spreadspace avr utils is distributed in the hope that it will be useful,

+##  but WITHOUT ANY WARRANTY; without even the implied warranty of

+##  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+##  GNU General Public License for more details.

+##

+##  You should have received a copy of the GNU General Public License

+##  along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.

+##

+

+NAME := pcr-controller

+BOARD_TYPE := teensy2

+OBJ := $(NAME).o pwm.o

+LIBS := util led lufa-descriptor-usbserial anyio onewire ds1820

+EXTERNAL_LIBS := lufa

+RESET_FUNC := ../tools/reset_lufa_cdc

+RESET_PARAM := 'r'

+

+LUFA_PATH := ../contrib/LUFA-120219

+LUFA_OPTS  = -D USB_DEVICE_ONLY

+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0

+LUFA_OPTS += -D ORDERED_EP_CONFIG

+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8

+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1

+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS

+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

+LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT

+

+LUFA_OPTS += -D USB_MANUFACTURER="L\"xro\""

+LUFA_OPTS += -D USB_PRODUCT="L\"$(NAME)\""

+

+LUFA_COMPONENTS := USB USBCLASS SERIAL

+

+include ../include.mk

diff --git a/pcr-controller/pcr-controller.c b/pcr-controller/pcr-controller.c
new file mode 100644
index 0000000..583d054
--- /dev/null
+++ b/pcr-controller/pcr-controller.c
@@ -0,0 +1,219 @@
+/*
+ *  OpenPCR Teensy Controller Code
+ *
+ *
+ *  Copyright (C) 2013 Bernhard Tittelbach <xro@realraum.at>
+*   uses avr-utils, anyio & co by Christian Pointner <equinox@spreadspace.org>
+ *
+ *  This file is part of spreadspace avr utils.
+ *
+ *  spreadspace avr utils is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  any later version.
+ *
+ *  spreadspace avr utils is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <avr/power.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "util.h"
+#include "led.h"
+#include "anyio.h"
+
+#include "onewire.h"
+#include "ds1820.h"
+
+#include "pwm.h"
+
+#define PIN_HIGH(PORT, PIN) PORT |= (1 << PIN)
+#define PIN_LOW(PORT, PIN) PORT &= ~(1 << PIN)
+#define PINMODE_OUTPUT PIN_HIGH  //just use DDR instead of PORT
+#define PINMODE_INPUT PIN_LOW  //just use DDR instead of PORT
+
+#define OP_SETBIT |=
+#define OP_CLEARBIT &= ~
+#define OP_CHECK &
+#define PIN_SW(PORTDDRREG, PIN, OP) PORTDDRREG OP (1 << PIN)
+
+#define HIGHv OP_SETBIT
+#define LOWv OP_CLEARBIT
+
+#define PUMP_PIN PINB3
+#define PELTIER_INA  PINF7
+#define PELTIER_INB  PINB6
+#define PELETIER_PWM_EN PINB5
+#define TOPHEAT_PIN PIND7
+
+
+
+uint8_t num_temp_sensors_ = 0;
+uint16_t raw_temp_ = 0;
+uint16_t target_temp_ = 0;
+uint16_t pid_p_ = 0;
+uint16_t pid_i_ = 0;
+uint16_t pid_d_ = 0;
+uint16_t pid_err_ = 0;
+
+void queryAndSaveTemperature(uint8_t bit_resolution)
+{
+    uint8_t sensor_index = 0;
+
+    if (num_temp_sensors_ == 0)
+    {
+        num_temp_sensors_ = ds1820_discover();
+    }
+
+    for (sensor_index=0; sensor_index < num_temp_sensors_; sensor_index++)
+    {
+        ds1820_set_resolution(sensor_index, bit_resolution);
+        ds1820_start_measuring(sensor_index);
+    }
+
+    ds1820_wait_conversion_time(bit_resolution);
+
+    for (sensor_index=0; sensor_index < num_temp_sensors_; sensor_index++)
+    {
+        raw_temp_ = ds1820_read_temperature(sensor_index);
+        if (raw_temp_ != DS1820_ERROR)
+        {
+            break; //we need only one successfully read value
+        }
+    }
+}
+
+void printRawTemp(int16_t raw_temp)
+{
+  printf("%d.%02d", raw_temp / 16, 100 * (raw_temp % 16) / 16);
+}
+
+void printTemperature(void)
+{
+  if (num_temp_sensors_ == 0)
+  {
+    printf("ERROR: No DS1820 sensors on 1wire bus, thus no temperature\r\n");
+    return;
+  }
+  if (raw_temp_ == DS1820_ERROR)
+  {
+      printf("ERROR talking to DS18b20, no valid temperature!\r\n");
+  } else {
+      printf("Temp: ");
+      printRawTemp(raw_temp_);
+      printf("\r\n");
+  }
+}
+
+void readIntoBuffer(char *buffer, uint8_t buflen)
+{
+  while (anyio_bytes_received() == 0);
+  int ReceivedByte=0;
+  do {
+    ReceivedByte = fgetc(stdin);
+    if (ReceivedByte != EOF)
+    {
+      *buffer = (char) ReceivedByte;
+      buffer++;
+      buflen --;
+    }
+  } while (ReceivedByte != '\n' && ReceivedByte != '\r' && buflen > 1);
+  *buffer = 0;
+}
+
+int16_t readNumber(void)
+{
+  char buffer[20];
+  readIntoBuffer(buffer, 20);
+  return atoi(buffer);
+}
+
+void handle_cmd(uint8_t cmd)
+{
+  switch(cmd) {
+  case ' ':
+  case '\n':
+  case '\r':
+    return;
+  case 'R':
+  case 'r': reset2bootloader(); break;
+  case 's': printTemperature(); return;
+  case 'L': led_toggle(); break;
+  case 't':
+    printf("TargetTemp: ");
+    printRawTemp(target_temp_);
+    printf("\r\n");
+    return;
+  case 'p': 
+  case 'i':
+  case 'd':
+    printf("PID P: %d\r\nPID I: %d\r\nPID D: %d\r\n", pid_p_, pid_i_, pid_d_);
+    return;
+  case 'T': target_temp_ = readNumber(); break;
+  case 'P': pid_p_ = readNumber(); break;
+  case 'I': pid_i_ = readNumber(); break;
+  case 'D': pid_d_ = readNumber();  pwm_set((uint8_t) pid_d_);  break;
+  case 'A': PIN_HIGH(PORTB, PUMP_PIN); break;
+  case 'a': PIN_LOW(PORTB, PUMP_PIN); break;  
+  case 'B': PIN_HIGH(PORTD, TOPHEAT_PIN); break;
+  case 'b': PIN_LOW(PORTD, TOPHEAT_PIN); break;  
+  default: printf("ERROR\r\n"); return;
+  }
+  printf("OK\r\n");
+}
+
+int main(void)
+{
+  /* Disable watchdog if enabled by bootloader/fuses */
+  MCUSR &= ~(1 << WDRF);
+  wdt_disable();
+
+  cpu_init();
+  led_init();
+  anyio_init(115200, 0);
+  sei();
+
+  led_off();
+  owi_init(PINC7, &PINC);
+  PINMODE_OUTPUT(DDRB, PUMP_PIN);
+  PIN_LOW(PORTB, PUMP_PIN);
+  PINMODE_OUTPUT(DDRB, PELETIER_PWM_EN);
+  PINMODE_OUTPUT(DDRB, PELTIER_INB);
+  PINMODE_OUTPUT(DDRF, PELTIER_INA);
+  PINMODE_OUTPUT(DDRD, TOPHEAT_PIN);
+  
+  pwm_init();
+  
+  num_temp_sensors_ = ds1820_discover();
+  
+  for(;;) 
+  {
+    int16_t BytesReceived = anyio_bytes_received();
+    while(BytesReceived > 0)
+    {
+      int ReceivedByte = fgetc(stdin);
+      if (ReceivedByte != EOF)
+      {
+        handle_cmd(ReceivedByte);
+      }
+      BytesReceived--;
+    }
+    
+    queryAndSaveTemperature(11);
+    
+    // PID control
+    
+    anyio_task();
+  }
+}
diff --git a/pcr-controller/pwm.c b/pcr-controller/pwm.c
new file mode 100644
index 0000000..918d37b
--- /dev/null
+++ b/pcr-controller/pwm.c
@@ -0,0 +1,48 @@
+
+#include "pwm.h"
+
+
+#define PWM_VAL OCR1AL
+//OC1A
+
+void pwm_init(void)
+{
+  DDRB |= (1<<PB5);
+  TCCR1A = 0;
+  TCNT1 = 0;
+  OCR1A = 0;
+  TCCR1A = (1<<COM1A1) | (1<<WGM10);
+  TCCR1B = (1<<WGM12);
+}
+
+inline void pwm_on(void)
+{
+  TCCR1B = (TCCR1A & 0xF8) | (1<<CS10);
+}
+
+inline void pwm_off(void)
+{
+  TCCR1B = (TCCR1A & 0xF8);
+  TCNT1 = 0;
+}
+
+void pwm_set(uint8_t val)
+{
+  if (val > 0)
+    pwm_on();
+  else
+    pwm_off();
+  PWM_VAL = val;
+}
+
+inline void pwm_inc(void)
+{
+  if(PWM_VAL < 255)
+    PWM_VAL++;
+}
+
+inline void pwm_dec(void)
+{
+  if(PWM_VAL > 0)
+    PWM_VAL--;
+}
diff --git a/pcr-controller/pwm.h b/pcr-controller/pwm.h
new file mode 100644
index 0000000..1e5f184
--- /dev/null
+++ b/pcr-controller/pwm.h
@@ -0,0 +1,10 @@
+#ifndef PWM_H_INCLUDED_
+#define PWM_H_INCLUDED_
+
+#include <avr/io.h>
+
+void pwm_init(void);
+void pwm_set(uint8_t val);
+
+
+#endif
\ No newline at end of file