fixed spelling error at manpage

4 files changed, 10 insertions, 10 deletions

diff --git a/doc/anytun-controld.8 b/doc/anytun-controld.8
index 7503857..40f9829 100644
--- a/doc/anytun-controld.8
+++ b/doc/anytun-controld.8
@@ -2,12 +2,12 @@
 .\"     Title: anytun-controld
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.1 <http://docbook.sf.net/>
-.\"      Date: 12/22/2009
+.\"      Date: 01/13/2010
 .\"    Manual: anytun-controld user manual
 .\"    Source: anytun trunk
 .\"  Language: English
 .\"
-.TH "ANYTUN\-CONTROLD" "8" "12/22/2009" "anytun trunk" "anytun-controld user manual"
+.TH "ANYTUN\-CONTROLD" "8" "01/13/2010" "anytun trunk" "anytun-controld user manual"
 .\" -----------------------------------------------------------------
 .\" * set default formatting
 .\" -----------------------------------------------------------------
@@ -108,7 +108,7 @@ The path to the file which holds the sync information\&.
 .PP
 \fB\-X, \-\-control\-host <hostname|ip>[:<port>]\fR
 .RS 4
-fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to seperate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
+fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to separate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
 .RE
 .SH "BUGS"
 .sp
diff --git a/doc/anytun-controld.8.txt b/doc/anytun-controld.8.txt
index 0d3e0b8..921d5d4 100644
--- a/doc/anytun-controld.8.txt
+++ b/doc/anytun-controld.8.txt
@@ -71,7 +71,7 @@ OPTIONS
    fetch the config from this host. The default is not to use a control
    host and therefore this is empty. Mind that the port can be omitted 
    in which case port 2323 is used. If you want to specify an
-   ipv6 address and a port you have to use [ and ] to seperate the address
+   ipv6 address and a port you have to use [ and ] to separate the address
    from the port, eg.: [::1]:1234. If you want to use the default port 
    [ and ] can be omitted.
 
diff --git a/doc/anytun.8 b/doc/anytun.8
index f739978..f415358 100644
--- a/doc/anytun.8
+++ b/doc/anytun.8
@@ -2,12 +2,12 @@
 .\"     Title: anytun
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.1 <http://docbook.sf.net/>
-.\"      Date: 12/22/2009
+.\"      Date: 01/13/2010
 .\"    Manual: anytun user manual
 .\"    Source: anytun trunk
 .\"  Language: English
 .\"
-.TH "ANYTUN" "8" "12/22/2009" "anytun trunk" "anytun user manual"
+.TH "ANYTUN" "8" "01/13/2010" "anytun trunk" "anytun user manual"
 .\" -----------------------------------------------------------------
 .\" * set default formatting
 .\" -----------------------------------------------------------------
@@ -178,12 +178,12 @@ It is possible to obtain a list of active connections by telnetting into this po
 .RS 4
 remote hosts to sync with
 
-This option is only needed for tunnel endpoints consisting of multiple anycast hosts\&. Here, one has to specify all unicast IP addresses of all other anycast hosts that comprise the anycast tunnel endpoint\&. By default synchronisation is disabled and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to seperate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
+This option is only needed for tunnel endpoints consisting of multiple anycast hosts\&. Here, one has to specify all unicast IP addresses of all other anycast hosts that comprise the anycast tunnel endpoint\&. By default synchronisation is disabled and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to separate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
 .RE
 .PP
 \fB\-X, \-\-control\-host <hostname|ip>[:<port>]\fR
 .RS 4
-fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to seperate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
+fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to separate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
 .RE
 .PP
 \fB\-d, \-\-dev <name>\fR
diff --git a/doc/anytun.8.txt b/doc/anytun.8.txt
index 377bb2d..ec7c301 100644
--- a/doc/anytun.8.txt
+++ b/doc/anytun.8.txt
@@ -161,7 +161,7 @@ passed to the daemon:
    comprise the anycast tunnel endpoint. By default synchronisation is
    disabled and therefore this is empty. Mind that the port can be
    omitted in which case port 2323 is used. If you want to specify an
-   ipv6 address and a port you have to use [ and ] to seperate the address
+   ipv6 address and a port you have to use [ and ] to separate the address
    from the port, eg.: [::1]:1234. If you want to use the default port 
    [ and ] can be omitted.
 
@@ -169,7 +169,7 @@ passed to the daemon:
    fetch the config from this host. The default is not to use a control
    host and therefore this is empty. Mind that the port can be omitted 
    in which case port 2323 is used. If you want to specify an
-   ipv6 address and a port you have to use [ and ] to seperate the address
+   ipv6 address and a port you have to use [ and ] to separate the address
    from the port, eg.: [::1]:1234. If you want to use the default port 
    [ and ] can be omitted.