From 3c67ba97955922e6047deae561ac7106bea14a91 Mon Sep 17 00:00:00 2001
From: Christian Pointner <equinox@mur.at>
Date: Wed, 22 Feb 2012 21:27:27 +0000
Subject: moved cmx589 sample code software directory

git-svn-id: https://svn.spreadspace.org/mur.sat@248 7de4ea59-55d0-425e-a1af-a3118ea81d4c
---
 software/cmx589a_teensy_test/Makefile       | 614 ++++++++++++++++++
 software/cmx589a_teensy_test/cmx589a.c      | 267 ++++++++
 software/cmx589a_teensy_test/tx_benchmark.c | 169 +++++
 software/cmx589a_teensy_test/uart.c         | 134 ++++
 software/cmx589a_teensy_test/uart.h         |  11 +
 software/cmx589a_teensy_test/usb_serial.c   | 936 ++++++++++++++++++++++++++++
 software/cmx589a_teensy_test/usb_serial.h   | 124 ++++
 7 files changed, 2255 insertions(+)
 create mode 100644 software/cmx589a_teensy_test/Makefile
 create mode 100644 software/cmx589a_teensy_test/cmx589a.c
 create mode 100644 software/cmx589a_teensy_test/tx_benchmark.c
 create mode 100644 software/cmx589a_teensy_test/uart.c
 create mode 100644 software/cmx589a_teensy_test/uart.h
 create mode 100644 software/cmx589a_teensy_test/usb_serial.c
 create mode 100644 software/cmx589a_teensy_test/usb_serial.h

(limited to 'software')

diff --git a/software/cmx589a_teensy_test/Makefile b/software/cmx589a_teensy_test/Makefile
new file mode 100644
index 0000000..0640c09
--- /dev/null
+++ b/software/cmx589a_teensy_test/Makefile
@@ -0,0 +1,614 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# Target file name (without extension).
+TARGET = cmx589a
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC =	$(TARGET).c \
+	usb_serial.c \
+	uart.c \
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4        # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC = 
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s]. 
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = 
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB = 
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB = 
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS = 
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = stk500v2
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT =  /dev/    # programmer connected to serial device
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when 
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+ELFSIZE = $(SIZE) $(TARGET).elf
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion : 
+	@$(CC) --version
+
+
+
+# Program the device.  
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set 
+#     a breakpoint at main().
+gdb-config: 
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/software/cmx589a_teensy_test/cmx589a.c b/software/cmx589a_teensy_test/cmx589a.c
new file mode 100644
index 0000000..ebeeca6
--- /dev/null
+++ b/software/cmx589a_teensy_test/cmx589a.c
@@ -0,0 +1,267 @@
+/* Simple example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2008 PJRC.COM, LLC
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <stdint.h>
+#include <util/delay.h>
+#include "usb_serial.h"
+#include "uart.h"
+
+#define LED_CONFIG	(DDRD |= (1<<6))
+#define LED_ON		(PORTD |= (1<<6))
+#define LED_OFF		(PORTD &= ~(1<<6))
+#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+
+#define INT1_SET_INPUT	(DDRD |= (1<<1))
+#define PB3_SET_OUTPUT	(DDRB &= ~ (1<<3))
+#define PB7_SET_OUTPUT	(DDRB &= ~(1<<7))
+
+#define PB3_TX_ENABLE		(PORTB |= (1<<3))
+#define PB3_TX_DISABLE		(PORTB &= ~(1<<3))
+
+#define ExtInt1On   EIMSK |= 1 << INT1
+#define ExtInt1Config   EICRA  |= (1 << ISC10 ) |  ( 1 << ISC11)
+
+#define UART_SET_DEFAULT      UCSR1C = 0
+#define UART_SET_8BIT      UCSR1C |= (1 << UMSEL10) | (1 << UCSZ10) | (1 << UCSZ11) 
+#define UART_SET_EXT_CLK  XCK1_DDR &= ~(1<<XCK1)
+
+
+
+
+//#define INIT_COUNTER_0  TCNT0 = 0
+//#define SET_CTC_MODE    WGM &= !7; WGM |= 2
+//#define SET_EXT_FREQ_5_3_MHZ    OCR0A = 3
+
+
+unsigned int snr_rsii_counter = 0;
+ISR(INT1_vect)
+{
+  snr_rsii_counter++;
+  
+  return 0;
+}
+
+#define BAUD_RATE 9600
+
+// write a string to the uart
+#define uart_print(s) uart_print_P(PSTR(s))
+void uart_print_P(const char *str)
+{
+	char c;
+	while (1) {
+		c = pgm_read_byte(str++);
+		if (!c) break;
+		uart_putchar(c);
+	}
+}
+
+void send_str(const char *s);
+uint8_t recv_str(char *buf, uint8_t size);
+void parse_and_execute_command(const char *buf, uint8_t num);
+
+// Basic command interpreter for controlling port pins
+int main(void)
+{
+	char buf[32];
+	uint8_t n, c;
+
+	// set for 16 MHz clock, and turn on the LED
+	CPU_PRESCALE(0);
+	LED_CONFIG;
+	LED_ON;
+
+    INT1_SET_INPUT;
+    ExtInt1On;
+    ExtInt1Config;
+  
+    PB3_SET_OUTPUT;
+    //PB3_TX_DISABLE;
+    PB3_TX_ENABLE;
+  
+  	usb_init();
+	uart_init(BAUD_RATE);
+
+
+	while (1) {
+		if (uart_available()) {
+			c = uart_getchar();
+          
+		}
+        uart_print("TEST\r\n");
+	}
+    return 0;
+    
+    //END
+  
+    // initialize the USB, and then wait for the host
+	// to set configuration.  If the Teensy is powered
+	// without a PC connected to the USB port, this 
+	// will wait forever.
+	while (!usb_configured()) /* wait */ ;
+	_delay_ms(1000);
+
+	while (1) {
+		// wait for the user to run their terminal emulator program
+		// which sets DTR to indicate it is ready to receive.
+		while (!(usb_serial_get_control() & USB_SERIAL_DTR)) /* wait */ ;
+
+		// discard anything that was received prior.  Sometimes the
+		// operating system or other software will send a modem
+		// "AT command", which can still be buffered.
+		usb_serial_flush_input();
+
+		// print a nice welcome message
+		send_str(PSTR("\r\nTeensy USB Serial Example, "
+			"Simple Pin Control Shell\r\n\r\n"
+			"Example Commands\r\n"
+			"  B0?   Read Port B, pin 0\r\n"
+			"  C2=0  Write Port C, pin 1 LOW\r\n"
+			"  D6=1  Write Port D, pin 6 HIGH  (D6 is LED pin)\r\n\r\n"));
+
+		// and then listen for commands and process them
+		while (1) {
+			send_str(PSTR("> "));
+			n = recv_str(buf, sizeof(buf));
+			if (n == 255) break;
+			send_str(PSTR("\r\n"));
+			parse_and_execute_command(buf, n);
+		}
+	}
+}
+
+
+// Send a string to the USB serial port.  The string must be in
+// flash memory, using PSTR
+//
+void send_str(const char *s)
+{
+	char c;
+	while (1) {
+		c = pgm_read_byte(s++);
+		if (!c) break;
+		usb_serial_putchar(c);
+	}
+}
+
+// Receive a string from the USB serial port.  The string is stored
+// in the buffer and this function will not exceed the buffer size.
+// A carriage return or newline completes the string, and is not
+// stored into the buffer.
+// The return value is the number of characters received, or 255 if
+// the virtual serial connection was closed while waiting.
+//
+uint8_t recv_str(char *buf, uint8_t size)
+{
+	int16_t r;
+	uint8_t count=0;
+
+	while (count < size) {
+		r = usb_serial_getchar();
+		if (r != -1) {
+			if (r == '\r' || r == '\n') return count;
+			if (r >= ' ' && r <= '~') {
+				*buf++ = r;
+				usb_serial_putchar(r);
+				count++;
+			}
+		} else {
+			if (!usb_configured() ||
+			  !(usb_serial_get_control() & USB_SERIAL_DTR)) {
+				// user no longer connected
+				return 255;
+			}
+			// just a normal timeout, keep waiting
+		}
+	}
+	return count;
+}
+
+// parse a user command and execute it, or print an error message
+//
+void parse_and_execute_command(const char *buf, uint8_t num)
+{
+	uint8_t port, pin, val;
+
+	if (num < 3) {
+		send_str(PSTR("unrecognized format, 3 chars min req'd\r\n"));
+		return;
+	}
+	// first character is the port letter
+	if (buf[0] >= 'A' && buf[0] <= 'F') {
+		port = buf[0] - 'A';
+	} else if (buf[0] >= 'a' && buf[0] <= 'f') {
+		port = buf[0] - 'a';
+	} else {
+		send_str(PSTR("Unknown port \""));
+		usb_serial_putchar(buf[0]);
+		send_str(PSTR("\", must be A - F\r\n"));
+		return;
+	}
+	// second character is the pin number
+	if (buf[1] >= '0' && buf[1] <= '7') {
+		pin = buf[1] - '0';
+	} else {
+		send_str(PSTR("Unknown pin \""));
+		usb_serial_putchar(buf[0]);
+		send_str(PSTR("\", must be 0 to 7\r\n"));
+		return;
+	}
+	// if the third character is a question mark, read the pin
+	if (buf[2] == '?') {
+		// make the pin an input
+		*(uint8_t *)(0x21 + port * 3) &= ~(1 << pin);
+		// read the pin
+		val = *(uint8_t *)(0x20 + port * 3) & (1 << pin);
+		usb_serial_putchar(val ? '1' : '0');
+		send_str(PSTR("\r\n"));
+		return;
+	}
+	// if the third character is an equals sign, write the pin
+	if (num >= 4 && buf[2] == '=') {
+		if (buf[3] == '0') {
+			// make the pin an output
+			*(uint8_t *)(0x21 + port * 3) |= (1 << pin);
+			// drive it low
+			*(uint8_t *)(0x22 + port * 3) &= ~(1 << pin);
+			return;
+		} else if (buf[3] == '1') {
+			// make the pin an output
+			*(uint8_t *)(0x21 + port * 3) |= (1 << pin);
+			// drive it high
+			*(uint8_t *)(0x22 + port * 3) |= (1 << pin);
+			return;
+		} else {
+			send_str(PSTR("Unknown value \""));
+			usb_serial_putchar(buf[3]);
+			send_str(PSTR("\", must be 0 or 1\r\n"));
+			return;
+		}
+	}
+	// otherwise, error message
+	send_str(PSTR("Unknown command \""));
+	usb_serial_putchar(buf[0]);
+	send_str(PSTR("\", must be ? or =\r\n"));
+}
+
diff --git a/software/cmx589a_teensy_test/tx_benchmark.c b/software/cmx589a_teensy_test/tx_benchmark.c
new file mode 100644
index 0000000..334947e
--- /dev/null
+++ b/software/cmx589a_teensy_test/tx_benchmark.c
@@ -0,0 +1,169 @@
+/* USB Serial Transmit Bandwidth Test for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2009 PJRC.COM, LLC
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <stdint.h>
+#include <util/delay.h>
+#include "usb_serial.h"
+
+#define LED_CONFIG	(DDRD |= (1<<6))
+#define LED_ON		(PORTD &= ~(1<<6))
+#define LED_OFF		(PORTD |= (1<<6))
+#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+
+void send_str(const char *s);
+
+#define CLEAR_TIMER0_OVERFLOW() (TIFR0 |= (1<<TOV0))
+#define IS_TIMER0_OVERFLOW() (TIFR0 & (1<<TOV0))
+
+
+// USB Serial Transmit Bandwidth Test
+//
+// Within 5 seconds of opening the port, this program
+// will send a message as rapidly as possible, for 10 seconds.
+// When finished, turn off text capture (some programs will not
+// write the last data until you do this), delete any extra lines
+// at the beginning, and then the file size divided by 10 is the
+// maximum transmit bandwidth.
+//
+// To use this, run a terminal emulator and select the option
+// to capture all text to a file.  On Linux & MacOS, you can use
+// the cat command to read data to a file, such as:
+// cat /dev/cu.usbmodem12341 > /tmp/test.txt
+// The serial_read.exe or serial_list program can read the data
+// without saving it.
+// Results can vary depending on the number of other USB devices
+// connected.  For fastest results, disconnect all others.
+
+// Results on Ubuntu 9.04, using: ./serial_listen /dev/ttyACM0
+// Teensy++: 11565234 in 10 seconds
+// Teensy:    9610184 in 10 seconds
+
+// Results on Mac OS X 10.5.7, using: ./serial_listen /dev/cu.usbmodem12341
+// Teensy++:  9013787 in 10 seconds
+// Teensy:    6386395 in 10 seconds
+
+// Results on Windows XP SP3, using: serial_read.exe COM3:
+// Teensy++: 10220367 in 10 seconds
+// Teensy:    8196387 in 10 seconds
+
+// Results on Windows Vista SP1, using: serial_read.exe COM3:
+// Teensy++: 10234275 in 10 seconds
+// Teensy:    8196204 in 10 seconds
+
+// Results on Windows 7 (beta 7100), using: serial_read.exe COM3:
+// Teensy++: 10274718 in 10 seconds
+// Teensy:    8225423 in 10 seconds
+
+// All 5 of these were tested on a Macbook with Intel dual core 2.4 Ghz,
+// external USB mouse + built-in USB peripherals
+
+
+int main(void)
+{
+	uint8_t n;
+	uint16_t count;
+	const char test_string[] = {  
+		"USB Fast Serial Transmit Bandwidth Test, capture this text.\r\n"};
+
+	// set for 16 MHz clock, and turn on the LED
+	CPU_PRESCALE(0);
+	LED_CONFIG;
+	LED_OFF;
+	DDRC |= (1<<2);  // Pin C2 to show % cpu usage
+
+	// configure timer0 to overflow every 4 ms, prescale=256, top=250
+	// 250 * 256 / 16 MHz = 4 ms
+	TIMSK0 = 0;
+	TCCR0A = (1<<WGM01)|(1<<WGM00);
+	OCR0A = 250;
+	TCCR0B = (1<<WGM02)|(1<<CS02);
+
+	// initialize the USB, and then wait for the host
+	// to set configuration.  If the Teensy is powered
+	// without a PC connected to the USB port, this 
+	// will wait forever.
+	usb_init();
+	while (!usb_configured()) /* wait */ ;
+	_delay_ms(1000);
+
+	while (1) {
+		// wait for the user to run their terminal emulator program
+		// which sets DTR to indicate it is ready to receive.
+		while (!(usb_serial_get_control() & USB_SERIAL_DTR)) /* wait */ ;
+
+		// Turn the LED on while sending data
+		LED_ON;
+
+		// give the user 5 seconds to enable text capture in their
+		// terminal emulator, or do whatever to get ready
+		for (n=5; n; n--) {
+			send_str(PSTR("10 second speed test begins in "));
+			usb_serial_putchar(n + '0');
+			send_str(PSTR(" sec.\r\n"));
+			if (!(usb_serial_get_control() & USB_SERIAL_DTR)) break;
+			_delay_ms(1000);
+		}
+
+		// wait for a 4 ms timer0 period to begin
+		CLEAR_TIMER0_OVERFLOW();
+		while (!IS_TIMER0_OVERFLOW()) /* wait */ ;
+		CLEAR_TIMER0_OVERFLOW();
+		count=0;
+
+		// send a string as fast as possible, for 10 seconds
+		while (1) {
+			usb_serial_write(test_string, (uint16_t)(sizeof(test_string)-1));
+			if (IS_TIMER0_OVERFLOW()) {
+				CLEAR_TIMER0_OVERFLOW();
+				count++;
+				if (count == 2500) break;   // 10 sec
+				if (!(usb_serial_get_control() & USB_SERIAL_DTR)) break;
+			}
+		}
+		PORTC &= ~(1<<2);
+		send_str(PSTR("done!\r\n"));
+		LED_OFF;
+
+		// after the test, wait forever doing nothing,
+		// well, at least until the terminal emulator quits
+		// or drops DTR for some reason.
+		while (usb_serial_get_control() & USB_SERIAL_DTR) /* wait */ ;
+	}
+}
+
+// Send a string to the USB serial port.  The string must be in
+// flash memory, using PSTR
+//
+void send_str(const char *s)
+{
+	char c;
+	while (1) {
+		c = pgm_read_byte(s++);
+		if (!c) break;
+		usb_serial_putchar(c);
+	}
+}
+
+
diff --git a/software/cmx589a_teensy_test/uart.c b/software/cmx589a_teensy_test/uart.c
new file mode 100644
index 0000000..94afe7e
--- /dev/null
+++ b/software/cmx589a_teensy_test/uart.c
@@ -0,0 +1,134 @@
+/* UART Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2009 PJRC.COM, LLC
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Version 1.0: Initial Release
+// Version 1.1: Add support for Teensy 2.0, minor optimizations
+
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+
+#include "uart.h"
+
+// These buffers may be any size from 2 to 256 bytes.
+#define RX_BUFFER_SIZE 64
+#define TX_BUFFER_SIZE 40
+
+static volatile uint8_t tx_buffer[TX_BUFFER_SIZE];
+static volatile uint8_t tx_buffer_head;
+static volatile uint8_t tx_buffer_tail;
+static volatile uint8_t rx_buffer[RX_BUFFER_SIZE];
+static volatile uint8_t rx_buffer_head;
+static volatile uint8_t rx_buffer_tail;
+
+// Initialize the UART
+void uart_init(uint32_t baud)
+{
+	cli();
+	UBRR1 = (F_CPU / 4 / baud - 1) / 2;
+	UCSR1A = (1<<U2X1);
+	UCSR1B = (1<<RXEN1) | (1<<TXEN1) | (1<<RXCIE1);
+	//UCSR1C = (1<<UCSZ11) | (1<<UCSZ10);
+	tx_buffer_head = tx_buffer_tail = 0;
+	rx_buffer_head = rx_buffer_tail = 0;
+  
+    UCSR1C = 0;
+    UCSR1C |= (1 << UMSEL10) | (1 << UCSZ10) | (1 << UCSZ11);
+    //use external clk by settting PD5 aka XCK1 to Input
+    DDRD |= 1<<5;
+    
+  
+	sei();
+}
+
+// Transmit a byte
+void uart_putchar(uint8_t c)
+{
+	uint8_t i;
+
+	i = tx_buffer_head + 1;
+	if (i >= TX_BUFFER_SIZE) i = 0;
+	while (tx_buffer_tail == i) ; // wait until space in buffer
+	//cli();
+	tx_buffer[i] = c;
+	tx_buffer_head = i;
+	UCSR1B = (1<<RXEN1) | (1<<TXEN1) | (1<<RXCIE1) | (1<<UDRIE1);
+	//sei();
+}
+
+// Receive a byte
+uint8_t uart_getchar(void)
+{
+        uint8_t c, i;
+
+	while (rx_buffer_head == rx_buffer_tail) ; // wait for character
+        i = rx_buffer_tail + 1;
+        if (i >= RX_BUFFER_SIZE) i = 0;
+        c = rx_buffer[i];
+        rx_buffer_tail = i;
+        return c;
+}
+
+// Return the number of bytes waiting in the receive buffer.
+// Call this before uart_getchar() to check if it will need
+// to wait for a byte to arrive.
+uint8_t uart_available(void)
+{
+	uint8_t head, tail;
+
+	head = rx_buffer_head;
+	tail = rx_buffer_tail;
+	if (head >= tail) return head - tail;
+	return RX_BUFFER_SIZE + head - tail;
+}
+
+// Transmit Interrupt
+ISR(USART1_UDRE_vect)
+{
+	uint8_t i;
+
+	if (tx_buffer_head == tx_buffer_tail) {
+		// buffer is empty, disable transmit interrupt
+		UCSR1B = (1<<RXEN1) | (1<<TXEN1) | (1<<RXCIE1);
+	} else {
+		i = tx_buffer_tail + 1;
+		if (i >= TX_BUFFER_SIZE) i = 0;
+		UDR1 = tx_buffer[i];
+		tx_buffer_tail = i;
+	}
+}
+
+// Receive Interrupt
+ISR(USART1_RX_vect)
+{
+	uint8_t c, i;
+
+	c = UDR1;
+	i = rx_buffer_head + 1;
+	if (i >= RX_BUFFER_SIZE) i = 0;
+	if (i != rx_buffer_tail) {
+		rx_buffer[i] = c;
+		rx_buffer_head = i;
+	}
+}
+
diff --git a/software/cmx589a_teensy_test/uart.h b/software/cmx589a_teensy_test/uart.h
new file mode 100644
index 0000000..41136a3
--- /dev/null
+++ b/software/cmx589a_teensy_test/uart.h
@@ -0,0 +1,11 @@
+#ifndef _uart_included_h_
+#define _uart_included_h_
+
+#include <stdint.h>
+
+void uart_init(uint32_t baud);
+void uart_putchar(uint8_t c);
+uint8_t uart_getchar(void);
+uint8_t uart_available(void);
+
+#endif
diff --git a/software/cmx589a_teensy_test/usb_serial.c b/software/cmx589a_teensy_test/usb_serial.c
new file mode 100644
index 0000000..821d80a
--- /dev/null
+++ b/software/cmx589a_teensy_test/usb_serial.c
@@ -0,0 +1,936 @@
+/* USB Serial Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_serial.html
+ * Copyright (c) 2008,2010,2011 PJRC.COM, LLC
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Version 1.0: Initial Release
+// Version 1.1: support Teensy++
+// Version 1.2: fixed usb_serial_available
+// Version 1.3: added transmit bandwidth test
+// Version 1.4: added usb_serial_write
+// Version 1.5: add support for Teensy 2.0
+// Version 1.6: fix zero length packet bug
+// Version 1.7: fix usb_serial_set_control
+
+#define USB_SERIAL_PRIVATE_INCLUDE
+#include "usb_serial.h"
+
+
+/**************************************************************************
+ *
+ *  Configurable Options
+ *
+ **************************************************************************/
+
+// You can change these to give your code its own name.  On Windows,
+// these are only used before an INF file (driver install) is loaded.
+#define STR_MANUFACTURER	L"Your Name"
+#define STR_PRODUCT		L"USB Serial"
+
+// All USB serial devices are supposed to have a serial number
+// (according to Microsoft).  On windows, a new COM port is created
+// for every unique serial/vendor/product number combination.  If
+// you program 2 identical boards with 2 different serial numbers
+// and they are assigned COM7 and COM8, each will always get the
+// same COM port number because Windows remembers serial numbers.
+//
+// On Mac OS-X, a device file is created automatically which
+// incorperates the serial number, eg, /dev/cu-usbmodem12341
+//
+// Linux by default ignores the serial number, and creates device
+// files named /dev/ttyACM0, /dev/ttyACM1... in the order connected.
+// Udev rules (in /etc/udev/rules.d) can define persistent device
+// names linked to this serial number, as well as permissions, owner
+// and group settings.
+#define STR_SERIAL_NUMBER	L"12345"
+
+// Mac OS-X and Linux automatically load the correct drivers.  On
+// Windows, even though the driver is supplied by Microsoft, an
+// INF file is needed to load the driver.  These numbers need to
+// match the INF file.
+#define VENDOR_ID		0x16C0
+#define PRODUCT_ID		0x047A
+
+// When you write data, it goes into a USB endpoint buffer, which
+// is transmitted to the PC when it becomes full, or after a timeout
+// with no more writes.  Even if you write in exactly packet-size
+// increments, this timeout is used to send a "zero length packet"
+// that tells the PC no more data is expected and it should pass
+// any buffered data to the application that may be waiting.  If
+// you want data sent immediately, call usb_serial_flush_output().
+#define TRANSMIT_FLUSH_TIMEOUT	5   /* in milliseconds */
+
+// If the PC is connected but not "listening", this is the length
+// of time before usb_serial_getchar() returns with an error.  This
+// is roughly equivilant to a real UART simply transmitting the
+// bits on a wire where nobody is listening, except you get an error
+// code which you can ignore for serial-like discard of data, or
+// use to know your data wasn't sent.
+#define TRANSMIT_TIMEOUT	25   /* in milliseconds */
+
+// USB devices are supposed to implment a halt feature, which is
+// rarely (if ever) used.  If you comment this line out, the halt
+// code will be removed, saving 116 bytes of space (gcc 4.3.0).
+// This is not strictly USB compliant, but works with all major
+// operating systems.
+#define SUPPORT_ENDPOINT_HALT
+
+
+
+/**************************************************************************
+ *
+ *  Endpoint Buffer Configuration
+ *
+ **************************************************************************/
+
+// These buffer sizes are best for most applications, but perhaps if you
+// want more buffering on some endpoint at the expense of others, this
+// is where you can make such changes.  The AT90USB162 has only 176 bytes
+// of DPRAM (USB buffers) and only endpoints 3 & 4 can double buffer.
+
+#define ENDPOINT0_SIZE		16
+#define CDC_ACM_ENDPOINT	2
+#define CDC_RX_ENDPOINT		3
+#define CDC_TX_ENDPOINT		4
+#if defined(__AVR_AT90USB162__)
+#define CDC_ACM_SIZE		16
+#define CDC_ACM_BUFFER		EP_SINGLE_BUFFER
+#define CDC_RX_SIZE		32
+#define CDC_RX_BUFFER 		EP_DOUBLE_BUFFER
+#define CDC_TX_SIZE		32
+#define CDC_TX_BUFFER		EP_DOUBLE_BUFFER
+#else
+#define CDC_ACM_SIZE		16
+#define CDC_ACM_BUFFER		EP_SINGLE_BUFFER
+#define CDC_RX_SIZE		64
+#define CDC_RX_BUFFER 		EP_DOUBLE_BUFFER
+#define CDC_TX_SIZE		64
+#define CDC_TX_BUFFER		EP_DOUBLE_BUFFER
+#endif
+
+static const uint8_t PROGMEM endpoint_config_table[] = {
+	0,
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(CDC_ACM_SIZE) | CDC_ACM_BUFFER,
+	1, EP_TYPE_BULK_OUT,      EP_SIZE(CDC_RX_SIZE) | CDC_RX_BUFFER,
+	1, EP_TYPE_BULK_IN,       EP_SIZE(CDC_TX_SIZE) | CDC_TX_BUFFER
+};
+
+
+/**************************************************************************
+ *
+ *  Descriptor Data
+ *
+ **************************************************************************/
+
+// Descriptors are the data that your computer reads when it auto-detects
+// this USB device (called "enumeration" in USB lingo).  The most commonly
+// changed items are editable at the top of this file.  Changing things
+// in here should only be done by those who've read chapter 9 of the USB
+// spec and relevant portions of any USB class specifications!
+
+static uint8_t PROGMEM device_descriptor[] = {
+	18,					// bLength
+	1,					// bDescriptorType
+	0x00, 0x02,				// bcdUSB
+	2,					// bDeviceClass
+	0,					// bDeviceSubClass
+	0,					// bDeviceProtocol
+	ENDPOINT0_SIZE,				// bMaxPacketSize0
+	LSB(VENDOR_ID), MSB(VENDOR_ID),		// idVendor
+	LSB(PRODUCT_ID), MSB(PRODUCT_ID),	// idProduct
+	0x00, 0x01,				// bcdDevice
+	1,					// iManufacturer
+	2,					// iProduct
+	3,					// iSerialNumber
+	1					// bNumConfigurations
+};
+
+#define CONFIG1_DESC_SIZE (9+9+5+5+4+5+7+9+7+7)
+static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
+	// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
+	9, 					// bLength;
+	2,					// bDescriptorType;
+	LSB(CONFIG1_DESC_SIZE),			// wTotalLength
+	MSB(CONFIG1_DESC_SIZE),
+	2,					// bNumInterfaces
+	1,					// bConfigurationValue
+	0,					// iConfiguration
+	0xC0,					// bmAttributes
+	50,					// bMaxPower
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	0,					// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x02,					// bInterfaceClass
+	0x02,					// bInterfaceSubClass
+	0x01,					// bInterfaceProtocol
+	0,					// iInterface
+	// CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
+	5,					// bFunctionLength
+	0x24,					// bDescriptorType
+	0x00,					// bDescriptorSubtype
+	0x10, 0x01,				// bcdCDC
+	// Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
+	5,					// bFunctionLength
+	0x24,					// bDescriptorType
+	0x01,					// bDescriptorSubtype
+	0x01,					// bmCapabilities
+	1,					// bDataInterface
+	// Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
+	4,					// bFunctionLength
+	0x24,					// bDescriptorType
+	0x02,					// bDescriptorSubtype
+	0x06,					// bmCapabilities
+	// Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
+	5,					// bFunctionLength
+	0x24,					// bDescriptorType
+	0x06,					// bDescriptorSubtype
+	0,					// bMasterInterface
+	1,					// bSlaveInterface0
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	CDC_ACM_ENDPOINT | 0x80,		// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	CDC_ACM_SIZE, 0,			// wMaxPacketSize
+	64,					// bInterval
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	1,					// bInterfaceNumber
+	0,					// bAlternateSetting
+	2,					// bNumEndpoints
+	0x0A,					// bInterfaceClass
+	0x00,					// bInterfaceSubClass
+	0x00,					// bInterfaceProtocol
+	0,					// iInterface
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	CDC_RX_ENDPOINT,			// bEndpointAddress
+	0x02,					// bmAttributes (0x02=bulk)
+	CDC_RX_SIZE, 0,				// wMaxPacketSize
+	0,					// bInterval
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	CDC_TX_ENDPOINT | 0x80,			// bEndpointAddress
+	0x02,					// bmAttributes (0x02=bulk)
+	CDC_TX_SIZE, 0,				// wMaxPacketSize
+	0					// bInterval
+};
+
+// If you're desperate for a little extra code memory, these strings
+// can be completely removed if iManufacturer, iProduct, iSerialNumber
+// in the device desciptor are changed to zeros.
+struct usb_string_descriptor_struct {
+	uint8_t bLength;
+	uint8_t bDescriptorType;
+	int16_t wString[];
+};
+static struct usb_string_descriptor_struct PROGMEM string0 = {
+	4,
+	3,
+	{0x0409}
+};
+static struct usb_string_descriptor_struct PROGMEM string1 = {
+	sizeof(STR_MANUFACTURER),
+	3,
+	STR_MANUFACTURER
+};
+static struct usb_string_descriptor_struct PROGMEM string2 = {
+	sizeof(STR_PRODUCT),
+	3,
+	STR_PRODUCT
+};
+static struct usb_string_descriptor_struct PROGMEM string3 = {
+	sizeof(STR_SERIAL_NUMBER),
+	3,
+	STR_SERIAL_NUMBER
+};
+
+// This table defines which descriptor data is sent for each specific
+// request from the host (in wValue and wIndex).
+static struct descriptor_list_struct {
+	uint16_t	wValue;
+	uint16_t	wIndex;
+	const uint8_t	*addr;
+	uint8_t		length;
+} PROGMEM descriptor_list[] = {
+	{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
+	{0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
+	{0x0300, 0x0000, (const uint8_t *)&string0, 4},
+	{0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
+	{0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)},
+	{0x0303, 0x0409, (const uint8_t *)&string3, sizeof(STR_SERIAL_NUMBER)}
+};
+#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
+
+
+/**************************************************************************
+ *
+ *  Variables - these are the only non-stack RAM usage
+ *
+ **************************************************************************/
+
+// zero when we are not configured, non-zero when enumerated
+static volatile uint8_t usb_configuration=0;
+
+// the time remaining before we transmit any partially full
+// packet, or send a zero length packet.
+static volatile uint8_t transmit_flush_timer=0;
+static uint8_t transmit_previous_timeout=0;
+
+// serial port settings (baud rate, control signals, etc) set
+// by the PC.  These are ignored, but kept in RAM.
+static uint8_t cdc_line_coding[7]={0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08};
+static uint8_t cdc_line_rtsdtr=0;
+
+
+/**************************************************************************
+ *
+ *  Public Functions - these are the API intended for the user
+ *
+ **************************************************************************/
+
+// initialize USB serial
+void usb_init(void)
+{
+	HW_CONFIG();
+        USB_FREEZE();				// enable USB
+        PLL_CONFIG();				// config PLL, 16 MHz xtal
+        while (!(PLLCSR & (1<<PLOCK))) ;	// wait for PLL lock
+        USB_CONFIG();				// start USB clock
+        UDCON = 0;				// enable attach resistor
+	usb_configuration = 0;
+	cdc_line_rtsdtr = 0;
+        UDIEN = (1<<EORSTE)|(1<<SOFE);
+	sei();
+}
+
+// return 0 if the USB is not configured, or the configuration
+// number selected by the HOST
+uint8_t usb_configured(void)
+{
+	return usb_configuration;
+}
+
+// get the next character, or -1 if nothing received
+int16_t usb_serial_getchar(void)
+{
+	uint8_t c, intr_state;
+
+	// interrupts are disabled so these functions can be
+	// used from the main program or interrupt context,
+	// even both in the same program!
+	intr_state = SREG;
+	cli();
+	if (!usb_configuration) {
+		SREG = intr_state;
+		return -1;
+	}
+	UENUM = CDC_RX_ENDPOINT;
+	retry:
+	c = UEINTX;
+	if (!(c & (1<<RWAL))) {
+		// no data in buffer
+		if (c & (1<<RXOUTI)) {
+			UEINTX = 0x6B;
+			goto retry;
+		}	
+		SREG = intr_state;
+		return -1;
+	}
+	// take one byte out of the buffer
+	c = UEDATX;
+	// if buffer completely used, release it
+	if (!(UEINTX & (1<<RWAL))) UEINTX = 0x6B;
+	SREG = intr_state;
+	return c;
+}
+
+// number of bytes available in the receive buffer
+uint8_t usb_serial_available(void)
+{
+	uint8_t n=0, i, intr_state;
+
+	intr_state = SREG;
+	cli();
+	if (usb_configuration) {
+		UENUM = CDC_RX_ENDPOINT;
+		n = UEBCLX;
+		if (!n) {
+			i = UEINTX;
+			if (i & (1<<RXOUTI) && !(i & (1<<RWAL))) UEINTX = 0x6B;
+		}
+	}
+	SREG = intr_state;
+	return n;
+}
+
+// discard any buffered input
+void usb_serial_flush_input(void)
+{
+	uint8_t intr_state;
+
+	if (usb_configuration) {
+		intr_state = SREG;
+		cli();
+		UENUM = CDC_RX_ENDPOINT;
+		while ((UEINTX & (1<<RWAL))) {
+			UEINTX = 0x6B; 
+		}
+		SREG = intr_state;
+	}
+}
+
+// transmit a character.  0 returned on success, -1 on error
+int8_t usb_serial_putchar(uint8_t c)
+{
+	uint8_t timeout, intr_state;
+
+	// if we're not online (enumerated and configured), error
+	if (!usb_configuration) return -1;
+	// interrupts are disabled so these functions can be
+	// used from the main program or interrupt context,
+	// even both in the same program!
+	intr_state = SREG;
+	cli();
+	UENUM = CDC_TX_ENDPOINT;
+	// if we gave up due to timeout before, don't wait again
+	if (transmit_previous_timeout) {
+		if (!(UEINTX & (1<<RWAL))) {
+			SREG = intr_state;
+			return -1;
+		}
+		transmit_previous_timeout = 0;
+	}
+	// wait for the FIFO to be ready to accept data
+	timeout = UDFNUML + TRANSMIT_TIMEOUT;
+	while (1) {
+		// are we ready to transmit?
+		if (UEINTX & (1<<RWAL)) break;
+		SREG = intr_state;
+		// have we waited too long?  This happens if the user
+		// is not running an application that is listening
+		if (UDFNUML == timeout) {
+			transmit_previous_timeout = 1;
+			return -1;
+		}
+		// has the USB gone offline?
+		if (!usb_configuration) return -1;
+		// get ready to try checking again
+		intr_state = SREG;
+		cli();
+		UENUM = CDC_TX_ENDPOINT;
+	}
+	// actually write the byte into the FIFO
+	UEDATX = c;
+	// if this completed a packet, transmit it now!
+	if (!(UEINTX & (1<<RWAL))) UEINTX = 0x3A;
+	transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
+	SREG = intr_state;
+	return 0;
+}
+
+
+// transmit a character, but do not wait if the buffer is full,
+//   0 returned on success, -1 on buffer full or error 
+int8_t usb_serial_putchar_nowait(uint8_t c)
+{
+	uint8_t intr_state;
+
+	if (!usb_configuration) return -1;
+	intr_state = SREG;
+	cli();
+	UENUM = CDC_TX_ENDPOINT;
+	if (!(UEINTX & (1<<RWAL))) {
+		// buffer is full
+		SREG = intr_state;
+		return -1;
+	}
+	// actually write the byte into the FIFO
+	UEDATX = c;
+		// if this completed a packet, transmit it now!
+	if (!(UEINTX & (1<<RWAL))) UEINTX = 0x3A;
+	transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
+	SREG = intr_state;
+	return 0;
+}
+
+// transmit a buffer.
+//  0 returned on success, -1 on error
+// This function is optimized for speed!  Each call takes approx 6.1 us overhead
+// plus 0.25 us per byte.  12 Mbit/sec USB has 8.67 us per-packet overhead and
+// takes 0.67 us per byte.  If called with 64 byte packet-size blocks, this function
+// can transmit at full USB speed using 43% CPU time.  The maximum theoretical speed
+// is 19 packets per USB frame, or 1216 kbytes/sec.  However, bulk endpoints have the
+// lowest priority, so any other USB devices will likely reduce the speed.  Speed
+// can also be limited by how quickly the PC-based software reads data, as the host
+// controller in the PC will not allocate bandwitdh without a pending read request.
+// (thanks to Victor Suarez for testing and feedback and initial code)
+
+int8_t usb_serial_write(const uint8_t *buffer, uint16_t size)
+{
+	uint8_t timeout, intr_state, write_size;
+
+	// if we're not online (enumerated and configured), error
+	if (!usb_configuration) return -1;
+	// interrupts are disabled so these functions can be
+	// used from the main program or interrupt context,
+	// even both in the same program!
+	intr_state = SREG;
+	cli();
+	UENUM = CDC_TX_ENDPOINT;
+	// if we gave up due to timeout before, don't wait again
+	if (transmit_previous_timeout) {
+		if (!(UEINTX & (1<<RWAL))) {
+			SREG = intr_state;
+			return -1;
+		}
+		transmit_previous_timeout = 0;
+	}
+	// each iteration of this loop transmits a packet
+	while (size) {
+		// wait for the FIFO to be ready to accept data
+		timeout = UDFNUML + TRANSMIT_TIMEOUT;
+		while (1) {
+			// are we ready to transmit?
+			if (UEINTX & (1<<RWAL)) break;
+			SREG = intr_state;
+			// have we waited too long?  This happens if the user
+			// is not running an application that is listening
+			if (UDFNUML == timeout) {
+				transmit_previous_timeout = 1;
+				return -1;
+			}
+			// has the USB gone offline?
+			if (!usb_configuration) return -1;
+			// get ready to try checking again
+			intr_state = SREG;
+			cli();
+			UENUM = CDC_TX_ENDPOINT;
+		}
+
+		// compute how many bytes will fit into the next packet
+		write_size = CDC_TX_SIZE - UEBCLX;
+		if (write_size > size) write_size = size;
+		size -= write_size;
+
+		// write the packet
+		switch (write_size) {
+			#if (CDC_TX_SIZE == 64)
+			case 64: UEDATX = *buffer++;
+			case 63: UEDATX = *buffer++;
+			case 62: UEDATX = *buffer++;
+			case 61: UEDATX = *buffer++;
+			case 60: UEDATX = *buffer++;
+			case 59: UEDATX = *buffer++;
+			case 58: UEDATX = *buffer++;
+			case 57: UEDATX = *buffer++;
+			case 56: UEDATX = *buffer++;
+			case 55: UEDATX = *buffer++;
+			case 54: UEDATX = *buffer++;
+			case 53: UEDATX = *buffer++;
+			case 52: UEDATX = *buffer++;
+			case 51: UEDATX = *buffer++;
+			case 50: UEDATX = *buffer++;
+			case 49: UEDATX = *buffer++;
+			case 48: UEDATX = *buffer++;
+			case 47: UEDATX = *buffer++;
+			case 46: UEDATX = *buffer++;
+			case 45: UEDATX = *buffer++;
+			case 44: UEDATX = *buffer++;
+			case 43: UEDATX = *buffer++;
+			case 42: UEDATX = *buffer++;
+			case 41: UEDATX = *buffer++;
+			case 40: UEDATX = *buffer++;
+			case 39: UEDATX = *buffer++;
+			case 38: UEDATX = *buffer++;
+			case 37: UEDATX = *buffer++;
+			case 36: UEDATX = *buffer++;
+			case 35: UEDATX = *buffer++;
+			case 34: UEDATX = *buffer++;
+			case 33: UEDATX = *buffer++;
+			#endif
+			#if (CDC_TX_SIZE >= 32)
+			case 32: UEDATX = *buffer++;
+			case 31: UEDATX = *buffer++;
+			case 30: UEDATX = *buffer++;
+			case 29: UEDATX = *buffer++;
+			case 28: UEDATX = *buffer++;
+			case 27: UEDATX = *buffer++;
+			case 26: UEDATX = *buffer++;
+			case 25: UEDATX = *buffer++;
+			case 24: UEDATX = *buffer++;
+			case 23: UEDATX = *buffer++;
+			case 22: UEDATX = *buffer++;
+			case 21: UEDATX = *buffer++;
+			case 20: UEDATX = *buffer++;
+			case 19: UEDATX = *buffer++;
+			case 18: UEDATX = *buffer++;
+			case 17: UEDATX = *buffer++;
+			#endif
+			#if (CDC_TX_SIZE >= 16)
+			case 16: UEDATX = *buffer++;
+			case 15: UEDATX = *buffer++;
+			case 14: UEDATX = *buffer++;
+			case 13: UEDATX = *buffer++;
+			case 12: UEDATX = *buffer++;
+			case 11: UEDATX = *buffer++;
+			case 10: UEDATX = *buffer++;
+			case  9: UEDATX = *buffer++;
+			#endif
+			case  8: UEDATX = *buffer++;
+			case  7: UEDATX = *buffer++;
+			case  6: UEDATX = *buffer++;
+			case  5: UEDATX = *buffer++;
+			case  4: UEDATX = *buffer++;
+			case  3: UEDATX = *buffer++;
+			case  2: UEDATX = *buffer++;
+			default:
+			case  1: UEDATX = *buffer++;
+			case  0: break;
+		}
+		// if this completed a packet, transmit it now!
+		if (!(UEINTX & (1<<RWAL))) UEINTX = 0x3A;
+		transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
+		SREG = intr_state;
+	}
+	return 0;
+}
+
+
+// immediately transmit any buffered output.
+// This doesn't actually transmit the data - that is impossible!
+// USB devices only transmit when the host allows, so the best
+// we can do is release the FIFO buffer for when the host wants it
+void usb_serial_flush_output(void)
+{
+	uint8_t intr_state;
+
+	intr_state = SREG;
+	cli();
+	if (transmit_flush_timer) {
+		UENUM = CDC_TX_ENDPOINT;
+		UEINTX = 0x3A;
+		transmit_flush_timer = 0;
+	}
+	SREG = intr_state;
+}
+
+// functions to read the various async serial settings.  These
+// aren't actually used by USB at all (communication is always
+// at full USB speed), but they are set by the host so we can
+// set them properly if we're converting the USB to a real serial
+// communication
+uint32_t usb_serial_get_baud(void)
+{
+	return *(uint32_t *)cdc_line_coding;
+}
+uint8_t usb_serial_get_stopbits(void)
+{
+	return cdc_line_coding[4];
+}
+uint8_t usb_serial_get_paritytype(void)
+{
+	return cdc_line_coding[5];
+}
+uint8_t usb_serial_get_numbits(void)
+{
+	return cdc_line_coding[6];
+}
+uint8_t usb_serial_get_control(void)
+{
+	return cdc_line_rtsdtr;
+}
+// write the control signals, DCD, DSR, RI, etc
+// There is no CTS signal.  If software on the host has transmitted
+// data to you but you haven't been calling the getchar function,
+// it remains buffered (either here or on the host) and can not be
+// lost because you weren't listening at the right time, like it
+// would in real serial communication.
+int8_t usb_serial_set_control(uint8_t signals)
+{
+	uint8_t intr_state;
+
+	intr_state = SREG;
+	cli();
+	if (!usb_configuration) {
+		// we're not enumerated/configured
+		SREG = intr_state;
+		return -1;
+	}
+
+	UENUM = CDC_ACM_ENDPOINT;
+	if (!(UEINTX & (1<<RWAL))) {
+		// unable to write
+		// TODO; should this try to abort the previously
+		// buffered message??
+		SREG = intr_state;
+		return -1;
+	}
+	UEDATX = 0xA1;
+	UEDATX = 0x20;
+	UEDATX = 0;
+	UEDATX = 0;
+	UEDATX = 0; // 0 seems to work nicely.  what if this is 1??
+	UEDATX = 0;
+	UEDATX = 1;
+	UEDATX = 0;
+	UEDATX = signals;
+	UEINTX = 0x3A;
+	SREG = intr_state;
+	return 0;
+}
+
+
+
+/**************************************************************************
+ *
+ *  Private Functions - not intended for general user consumption....
+ *
+ **************************************************************************/
+
+
+// USB Device Interrupt - handle all device-level events
+// the transmit buffer flushing is triggered by the start of frame
+//
+ISR(USB_GEN_vect)
+{
+	uint8_t intbits, t;
+
+        intbits = UDINT;
+        UDINT = 0;
+        if (intbits & (1<<EORSTI)) {
+		UENUM = 0;
+		UECONX = 1;
+		UECFG0X = EP_TYPE_CONTROL;
+		UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
+		UEIENX = (1<<RXSTPE);
+		usb_configuration = 0;
+		cdc_line_rtsdtr = 0;
+        }
+	if (intbits & (1<<SOFI)) {
+		if (usb_configuration) {
+			t = transmit_flush_timer;
+			if (t) {
+				transmit_flush_timer = --t;
+				if (!t) {
+					UENUM = CDC_TX_ENDPOINT;
+					UEINTX = 0x3A;
+				}
+			}
+		}
+	}
+}
+
+
+// Misc functions to wait for ready and send/receive packets
+static inline void usb_wait_in_ready(void)
+{
+	while (!(UEINTX & (1<<TXINI))) ;
+}
+static inline void usb_send_in(void)
+{
+	UEINTX = ~(1<<TXINI);
+}
+static inline void usb_wait_receive_out(void)
+{
+	while (!(UEINTX & (1<<RXOUTI))) ;
+}
+static inline void usb_ack_out(void)
+{
+	UEINTX = ~(1<<RXOUTI);
+}
+
+
+
+// USB Endpoint Interrupt - endpoint 0 is handled here.  The
+// other endpoints are manipulated by the user-callable
+// functions, and the start-of-frame interrupt.
+//
+ISR(USB_COM_vect)
+{
+        uint8_t intbits;
+	const uint8_t *list;
+        const uint8_t *cfg;
+	uint8_t i, n, len, en;
+	uint8_t *p;
+	uint8_t bmRequestType;
+	uint8_t bRequest;
+	uint16_t wValue;
+	uint16_t wIndex;
+	uint16_t wLength;
+	uint16_t desc_val;
+	const uint8_t *desc_addr;
+	uint8_t	desc_length;
+
+        UENUM = 0;
+        intbits = UEINTX;
+        if (intbits & (1<<RXSTPI)) {
+                bmRequestType = UEDATX;
+                bRequest = UEDATX;
+                wValue = UEDATX;
+                wValue |= (UEDATX << 8);
+                wIndex = UEDATX;
+                wIndex |= (UEDATX << 8);
+                wLength = UEDATX;
+                wLength |= (UEDATX << 8);
+                UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
+                if (bRequest == GET_DESCRIPTOR) {
+			list = (const uint8_t *)descriptor_list;
+			for (i=0; ; i++) {
+				if (i >= NUM_DESC_LIST) {
+					UECONX = (1<<STALLRQ)|(1<<EPEN);  //stall
+					return;
+				}
+				desc_val = pgm_read_word(list);
+				if (desc_val != wValue) {
+					list += sizeof(struct descriptor_list_struct);
+					continue;
+				}
+				list += 2;
+				desc_val = pgm_read_word(list);
+				if (desc_val != wIndex) {
+					list += sizeof(struct descriptor_list_struct)-2;
+					continue;
+				}
+				list += 2;
+				desc_addr = (const uint8_t *)pgm_read_word(list);
+				list += 2;
+				desc_length = pgm_read_byte(list);
+				break;
+			}
+			len = (wLength < 256) ? wLength : 255;
+			if (len > desc_length) len = desc_length;
+			do {
+				// wait for host ready for IN packet
+				do {
+					i = UEINTX;
+				} while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
+				if (i & (1<<RXOUTI)) return;	// abort
+				// send IN packet
+				n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
+				for (i = n; i; i--) {
+					UEDATX = pgm_read_byte(desc_addr++);
+				}
+				len -= n;
+				usb_send_in();
+			} while (len || n == ENDPOINT0_SIZE);
+			return;
+                }
+		if (bRequest == SET_ADDRESS) {
+			usb_send_in();
+			usb_wait_in_ready();
+			UDADDR = wValue | (1<<ADDEN);
+			return;
+		}
+		if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
+			usb_configuration = wValue;
+			cdc_line_rtsdtr = 0;
+			transmit_flush_timer = 0;
+			usb_send_in();
+			cfg = endpoint_config_table;
+			for (i=1; i<5; i++) {
+				UENUM = i;
+				en = pgm_read_byte(cfg++);
+				UECONX = en;
+				if (en) {
+					UECFG0X = pgm_read_byte(cfg++);
+					UECFG1X = pgm_read_byte(cfg++);
+				}
+			}
+        		UERST = 0x1E;
+        		UERST = 0;
+			return;
+		}
+		if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
+			usb_wait_in_ready();
+			UEDATX = usb_configuration;
+			usb_send_in();
+			return;
+		}
+		if (bRequest == CDC_GET_LINE_CODING && bmRequestType == 0xA1) {
+			usb_wait_in_ready();
+			p = cdc_line_coding;
+			for (i=0; i<7; i++) {
+				UEDATX = *p++;
+			}
+			usb_send_in();
+			return;
+		}
+		if (bRequest == CDC_SET_LINE_CODING && bmRequestType == 0x21) {
+			usb_wait_receive_out();
+			p = cdc_line_coding;
+			for (i=0; i<7; i++) {
+				*p++ = UEDATX;
+			}
+			usb_ack_out();
+			usb_send_in();
+			return;
+		}
+		if (bRequest == CDC_SET_CONTROL_LINE_STATE && bmRequestType == 0x21) {
+			cdc_line_rtsdtr = wValue;
+			usb_wait_in_ready();
+			usb_send_in();
+			return;
+		}
+		if (bRequest == GET_STATUS) {
+			usb_wait_in_ready();
+			i = 0;
+			#ifdef SUPPORT_ENDPOINT_HALT
+			if (bmRequestType == 0x82) {
+				UENUM = wIndex;
+				if (UECONX & (1<<STALLRQ)) i = 1;
+				UENUM = 0;
+			}
+			#endif
+			UEDATX = i;
+			UEDATX = 0;
+			usb_send_in();
+			return;
+		}
+		#ifdef SUPPORT_ENDPOINT_HALT
+		if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
+		  && bmRequestType == 0x02 && wValue == 0) {
+			i = wIndex & 0x7F;
+			if (i >= 1 && i <= MAX_ENDPOINT) {
+				usb_send_in();
+				UENUM = i;
+				if (bRequest == SET_FEATURE) {
+					UECONX = (1<<STALLRQ)|(1<<EPEN);
+				} else {
+					UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN);
+					UERST = (1 << i);
+					UERST = 0;
+				}
+				return;
+			}
+		}
+		#endif
+        }
+	UECONX = (1<<STALLRQ) | (1<<EPEN);	// stall
+}
+
+
diff --git a/software/cmx589a_teensy_test/usb_serial.h b/software/cmx589a_teensy_test/usb_serial.h
new file mode 100644
index 0000000..14c5b1a
--- /dev/null
+++ b/software/cmx589a_teensy_test/usb_serial.h
@@ -0,0 +1,124 @@
+#ifndef usb_serial_h__
+#define usb_serial_h__
+
+#include <stdint.h>
+
+// setup
+void usb_init(void);			// initialize everything
+uint8_t usb_configured(void);		// is the USB port configured
+
+// receiving data
+int16_t usb_serial_getchar(void);	// receive a character (-1 if timeout/error)
+uint8_t usb_serial_available(void);	// number of bytes in receive buffer
+void usb_serial_flush_input(void);	// discard any buffered input
+
+// transmitting data
+int8_t usb_serial_putchar(uint8_t c);	// transmit a character
+int8_t usb_serial_putchar_nowait(uint8_t c);  // transmit a character, do not wait
+int8_t usb_serial_write(const uint8_t *buffer, uint16_t size); // transmit a buffer
+void usb_serial_flush_output(void);	// immediately transmit any buffered output
+
+// serial parameters
+uint32_t usb_serial_get_baud(void);	// get the baud rate
+uint8_t usb_serial_get_stopbits(void);	// get the number of stop bits
+uint8_t usb_serial_get_paritytype(void);// get the parity type
+uint8_t usb_serial_get_numbits(void);	// get the number of data bits
+uint8_t usb_serial_get_control(void);	// get the RTS and DTR signal state
+int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc
+
+// constants corresponding to the various serial parameters
+#define USB_SERIAL_DTR			0x01
+#define USB_SERIAL_RTS			0x02
+#define USB_SERIAL_1_STOP		0
+#define USB_SERIAL_1_5_STOP		1
+#define USB_SERIAL_2_STOP		2
+#define USB_SERIAL_PARITY_NONE		0
+#define USB_SERIAL_PARITY_ODD		1
+#define USB_SERIAL_PARITY_EVEN		2
+#define USB_SERIAL_PARITY_MARK		3
+#define USB_SERIAL_PARITY_SPACE		4
+#define USB_SERIAL_DCD			0x01
+#define USB_SERIAL_DSR			0x02
+#define USB_SERIAL_BREAK		0x04
+#define USB_SERIAL_RI			0x08
+#define USB_SERIAL_FRAME_ERR		0x10
+#define USB_SERIAL_PARITY_ERR		0x20
+#define USB_SERIAL_OVERRUN_ERR		0x40
+
+// This file does not include the HID debug functions, so these empty
+// macros replace them with nothing, so users can compile code that
+// has calls to these functions.
+#define usb_debug_putchar(c)
+#define usb_debug_flush_output()
+
+
+
+// Everything below this point is only intended for usb_serial.c
+#ifdef USB_SERIAL_PRIVATE_INCLUDE
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#define EP_TYPE_CONTROL			0x00
+#define EP_TYPE_BULK_IN			0x81
+#define EP_TYPE_BULK_OUT		0x80
+#define EP_TYPE_INTERRUPT_IN		0xC1
+#define EP_TYPE_INTERRUPT_OUT		0xC0
+#define EP_TYPE_ISOCHRONOUS_IN		0x41
+#define EP_TYPE_ISOCHRONOUS_OUT		0x40
+#define EP_SINGLE_BUFFER		0x02
+#define EP_DOUBLE_BUFFER		0x06
+#define EP_SIZE(s)	((s) == 64 ? 0x30 :	\
+			((s) == 32 ? 0x20 :	\
+			((s) == 16 ? 0x10 :	\
+			             0x00)))
+
+#define MAX_ENDPOINT		4
+
+#define LSB(n) (n & 255)
+#define MSB(n) ((n >> 8) & 255)
+
+#if defined(__AVR_AT90USB162__)
+#define HW_CONFIG() 
+#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
+#define USB_CONFIG() (USBCON = (1<<USBE))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_ATmega32U4__)
+#define HW_CONFIG() (UHWCON = 0x01)
+#define PLL_CONFIG() (PLLCSR = 0x12)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB646__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x1A)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB1286__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x16)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#endif
+
+// standard control endpoint request types
+#define GET_STATUS			0
+#define CLEAR_FEATURE			1
+#define SET_FEATURE			3
+#define SET_ADDRESS			5
+#define GET_DESCRIPTOR			6
+#define GET_CONFIGURATION		8
+#define SET_CONFIGURATION		9
+#define GET_INTERFACE			10
+#define SET_INTERFACE			11
+// HID (human interface device)
+#define HID_GET_REPORT			1
+#define HID_GET_PROTOCOL		3
+#define HID_SET_REPORT			9
+#define HID_SET_IDLE			10
+#define HID_SET_PROTOCOL		11
+// CDC (communication class device)
+#define CDC_SET_LINE_CODING		0x20
+#define CDC_GET_LINE_CODING		0x21
+#define CDC_SET_CONTROL_LINE_STATE	0x22
+#endif
+#endif
-- 
cgit v1.2.3