From 9782aae3cc6896f8305c412fcf4c9ad44f74d72b Mon Sep 17 00:00:00 2001 From: Christian Pointner Date: Wed, 16 May 2012 22:53:01 +0000 Subject: removed old/unused cmx589 test code git-svn-id: https://svn.spreadspace.org/mur.sat@411 7de4ea59-55d0-425e-a1af-a3118ea81d4c --- software/cmx589a_teensy_test/usb_serial.h | 124 ------------------------------ 1 file changed, 124 deletions(-) delete mode 100644 software/cmx589a_teensy_test/usb_serial.h (limited to 'software/cmx589a_teensy_test/usb_serial.h') diff --git a/software/cmx589a_teensy_test/usb_serial.h b/software/cmx589a_teensy_test/usb_serial.h deleted file mode 100644 index 14c5b1a..0000000 --- a/software/cmx589a_teensy_test/usb_serial.h +++ /dev/null @@ -1,124 +0,0 @@ -#ifndef usb_serial_h__ -#define usb_serial_h__ - -#include - -// setup -void usb_init(void); // initialize everything -uint8_t usb_configured(void); // is the USB port configured - -// receiving data -int16_t usb_serial_getchar(void); // receive a character (-1 if timeout/error) -uint8_t usb_serial_available(void); // number of bytes in receive buffer -void usb_serial_flush_input(void); // discard any buffered input - -// transmitting data -int8_t usb_serial_putchar(uint8_t c); // transmit a character -int8_t usb_serial_putchar_nowait(uint8_t c); // transmit a character, do not wait -int8_t usb_serial_write(const uint8_t *buffer, uint16_t size); // transmit a buffer -void usb_serial_flush_output(void); // immediately transmit any buffered output - -// serial parameters -uint32_t usb_serial_get_baud(void); // get the baud rate -uint8_t usb_serial_get_stopbits(void); // get the number of stop bits -uint8_t usb_serial_get_paritytype(void);// get the parity type -uint8_t usb_serial_get_numbits(void); // get the number of data bits -uint8_t usb_serial_get_control(void); // get the RTS and DTR signal state -int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc - -// constants corresponding to the various serial parameters -#define USB_SERIAL_DTR 0x01 -#define USB_SERIAL_RTS 0x02 -#define USB_SERIAL_1_STOP 0 -#define USB_SERIAL_1_5_STOP 1 -#define USB_SERIAL_2_STOP 2 -#define USB_SERIAL_PARITY_NONE 0 -#define USB_SERIAL_PARITY_ODD 1 -#define USB_SERIAL_PARITY_EVEN 2 -#define USB_SERIAL_PARITY_MARK 3 -#define USB_SERIAL_PARITY_SPACE 4 -#define USB_SERIAL_DCD 0x01 -#define USB_SERIAL_DSR 0x02 -#define USB_SERIAL_BREAK 0x04 -#define USB_SERIAL_RI 0x08 -#define USB_SERIAL_FRAME_ERR 0x10 -#define USB_SERIAL_PARITY_ERR 0x20 -#define USB_SERIAL_OVERRUN_ERR 0x40 - -// This file does not include the HID debug functions, so these empty -// macros replace them with nothing, so users can compile code that -// has calls to these functions. -#define usb_debug_putchar(c) -#define usb_debug_flush_output() - - - -// Everything below this point is only intended for usb_serial.c -#ifdef USB_SERIAL_PRIVATE_INCLUDE -#include -#include -#include - -#define EP_TYPE_CONTROL 0x00 -#define EP_TYPE_BULK_IN 0x81 -#define EP_TYPE_BULK_OUT 0x80 -#define EP_TYPE_INTERRUPT_IN 0xC1 -#define EP_TYPE_INTERRUPT_OUT 0xC0 -#define EP_TYPE_ISOCHRONOUS_IN 0x41 -#define EP_TYPE_ISOCHRONOUS_OUT 0x40 -#define EP_SINGLE_BUFFER 0x02 -#define EP_DOUBLE_BUFFER 0x06 -#define EP_SIZE(s) ((s) == 64 ? 0x30 : \ - ((s) == 32 ? 0x20 : \ - ((s) == 16 ? 0x10 : \ - 0x00))) - -#define MAX_ENDPOINT 4 - -#define LSB(n) (n & 255) -#define MSB(n) ((n >> 8) & 255) - -#if defined(__AVR_AT90USB162__) -#define HW_CONFIG() -#define PLL_CONFIG() (PLLCSR = ((1<