diff options
Diffstat (limited to 'software/mpu/board-F103/board.h')
| -rw-r--r-- | software/mpu/board-F103/board.h | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/software/mpu/board-F103/board.h b/software/mpu/board-F103/board.h new file mode 100644 index 0000000..465a864 --- /dev/null +++ b/software/mpu/board-F103/board.h @@ -0,0 +1,151 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for mur.sat MPU board. + */ + +/* + * Board identifier. + */ +#define BOARD_MURSAT_MPU +#define BOARD_NAME "mur.sat MPU" + +/* + * Board frequencies. + */ +#define STM32_LSECLK 0 +#define STM32_HSECLK 8000000 + +/* + * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. + */ +#define STM32F10X_HD + +/* + * IO pins assignments. + */ +#define GPIOA_LED 8 +#define GPIOA_USB_DISC 13 + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with PullUp or PullDown resistor depending on ODR. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the STM32 Reference Manual for details. + */ + +/* + * Port A setup. + * Everything input with pull-up except: + * PA8 - Push Pull output (LED). + * PA11 - Normal input (USB DM). + * PA12 - Normal input (USB DP). + * PA13 - Push Pull output (USB DISC). + */ +#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ +#define VAL_GPIOACRH 0x88344883 /* PA15...PA8 */ +#define VAL_GPIOAODR 0xFFFFFFFF + +/* + * Port B setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ +#define VAL_GPIOBODR 0xFFFFFFFF + +/* + * Port C setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ +#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ +#define VAL_GPIOCODR 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + * PD0 - Normal input (XTAL). + * PD1 - Normal input (XTAL). + */ +#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ +#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODR 0xFFFFFFFF + +/* + * Port E setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ +#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ +#define VAL_GPIOEODR 0xFFFFFFFF + +/* + * Port F setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOFCRL 0x88888888 /* PF7...PF0 */ +#define VAL_GPIOFCRH 0x88888888 /* PF15...PF8 */ +#define VAL_GPIOFODR 0xFFFFFFFF + +/* + * Port G setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOGCRL 0x88888888 /* PG7...PG0 */ +#define VAL_GPIOGCRH 0x88888888 /* PG15...PG8 */ +#define VAL_GPIOGODR 0xFFFFFFFF + +/* + * These macros are needed by the USB driver but for compatibility + * with STM32F405-style processors not used. + */ +#define usb_lld_connect_bus(usbp) +#define usb_lld_disconnect_bus(usbp) + + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ |