diff options
Diffstat (limited to 'software/mpu.old')
| -rw-r--r-- | software/mpu.old/.cproject | 448 | ||||
| -rw-r--r-- | software/mpu.old/.project | 81 | ||||
| -rw-r--r-- | software/mpu.old/MurSatMPU Debug.launch | 32 | ||||
| -rw-r--r-- | software/mpu.old/MurSatMPU Release.launch | 28 | ||||
| -rw-r--r-- | software/mpu.old/inc/FreeRTOSConfig.h | 108 | ||||
| -rw-r--r-- | software/mpu.old/inc/Types.h | 45 | ||||
| -rw-r--r-- | software/mpu.old/inc/ssp.h | 112 | ||||
| -rw-r--r-- | software/mpu.old/src/adc.c | 250 | ||||
| -rw-r--r-- | software/mpu.old/src/adc.h | 35 | ||||
| -rw-r--r-- | software/mpu.old/src/boot.c | 78 | ||||
| -rw-r--r-- | software/mpu.old/src/camera.c | 62 | ||||
| -rw-r--r-- | software/mpu.old/src/cr_startup_lpc13.c | 367 | ||||
| -rw-r--r-- | software/mpu.old/src/kernel.c | 117 | ||||
| -rw-r--r-- | software/mpu.old/src/lightsens.c | 116 | ||||
| -rw-r--r-- | software/mpu.old/src/main.c | 20 | ||||
| -rw-r--r-- | software/mpu.old/src/ssp.c | 263 | ||||
| -rw-r--r-- | software/mpu.old/src/test_ssp.c | 7 | ||||
| -rw-r--r-- | software/mpu.old/src/uart.c | 198 | ||||
| -rw-r--r-- | software/mpu.old/src/uart.h | 55 |
19 files changed, 2422 insertions, 0 deletions
diff --git a/software/mpu.old/.cproject b/software/mpu.old/.cproject new file mode 100644 index 0000000..2b5261c --- /dev/null +++ b/software/mpu.old/.cproject @@ -0,0 +1,448 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+<storageModule moduleId="org.eclipse.cdt.core.settings">
+<cconfiguration id="com.crt.advproject.config.exe.debug.1738945474">
+<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1738945474" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+<externalSettings/>
+<extensions>
+<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+</extensions>
+</storageModule>
+<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+<configuration artifactExtension="axf" artifactName="MurSatMPU" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="Debug build" errorParsers="org.eclipse.cdt.core.MakeErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.config.exe.debug.1738945474" name="Debug" parent="com.crt.advproject.config.exe.debug" postannouncebuildStep="Performing post-build steps" postbuildStep="arm-none-eabi-size ${BuildArtifactFileName}; # arm-none-eabi-objcopy -O binary ${BuildArtifactFileName} ${BuildArtifactFileBaseName}.bin ; checksum -p ${TargetChip} -d ${BuildArtifactFileBaseName}.bin; " preannouncebuildStep="" prebuildStep="">
+<folderInfo id="com.crt.advproject.config.exe.debug.1738945474." name="/" resourcePath="">
+<toolChain errorParsers="" id="com.crt.advproject.toolchain.exe.debug.346368450" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.debug">
+<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.debug.646161168" name="ARM-based MCU (Debug)" superClass="com.crt.advproject.platform.exe.debug"/>
+<builder buildPath="${workspace_loc:/MurSatMPU/Debug}" errorParsers="org.eclipse.cdt.core.MakeErrorParser" id="com.crt.advproject.builder.exe.debug.1695724398" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
+<tool id="com.crt.advproject.cpp.exe.debug.1999711596" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
+<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.190059530" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
+<option id="com.crt.advproject.gcc.arch.609177370" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
+<option id="com.crt.advproject.gcc.thumb.913037538" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
+<option id="gnu.c.compiler.option.preprocessor.def.symbols.2049580117" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
+<listOptionValue builtIn="false" value="DEBUG"/>
+<listOptionValue builtIn="false" value="__USE_CMSIS=CMSISv1p30_LPC13xx"/>
+<listOptionValue builtIn="false" value="__CODE_RED"/>
+<listOptionValue builtIn="false" value="__REDLIB__"/>
+</option>
+<option id="gnu.c.compiler.option.misc.other.1603737687" name="Other flags" superClass="gnu.c.compiler.option.misc.other" value="-c -fmessage-length=0 -fno-builtin -ffunction-sections -fdata-sections" valueType="string"/>
+<option id="com.crt.advproject.gcc.hdrlib.1455759711" name="Use headers for C library" superClass="com.crt.advproject.gcc.hdrlib" value="com.crt.advproject.gcc.hdrlib.codered" valueType="enumerated"/>
+<option id="gnu.c.compiler.option.include.paths.1554323448" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
+<listOptionValue builtIn="false" value=""${workspace_loc:/FreeRTOS_Library/portable}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/MurSatMPU/inc}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/FreeRTOS_Library/include}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/CMSISv1p30_LPC13xx/inc}""/>
+</option>
+<inputType id="com.crt.advproject.compiler.input.1833669522" superClass="com.crt.advproject.compiler.input"/>
+</tool>
+<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.801481983" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
+<option id="com.crt.advproject.gas.arch.1010550360" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
+<option id="com.crt.advproject.gas.thumb.945937757" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
+<option id="gnu.both.asm.option.flags.crt.544593920" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -DDEBUG -D__CODE_RED -D__REDLIB__ " valueType="string"/>
+<option id="com.crt.advproject.gas.hdrlib.962009416" name="Use headers for C library" superClass="com.crt.advproject.gas.hdrlib" value="com.crt.advproject.gas.hdrlib.codered" valueType="enumerated"/>
+<inputType id="com.crt.advproject.assembler.input.1244179942" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
+</tool>
+<tool id="com.crt.advproject.link.cpp.exe.debug.1355718612" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
+<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.447216855" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
+<option id="com.crt.advproject.link.arch.1031548161" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
+<option id="com.crt.advproject.link.thumb.1490059546" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
+<option id="com.crt.advproject.link.script.1782004531" name="Linker script" superClass="com.crt.advproject.link.script" value=""MurSatMPU_Debug.ld"" valueType="string"/>
+<option id="com.crt.advproject.link.manage.308146822" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
+<option id="gnu.c.link.option.nostdlibs.579224778" name="No startup or default libs (-nostdlib)" superClass="gnu.c.link.option.nostdlibs" value="true" valueType="boolean"/>
+<option id="gnu.c.link.option.other.565861822" name="Other options (-Xlinker [option])" superClass="gnu.c.link.option.other" valueType="stringList">
+<listOptionValue builtIn="false" value="-Map=${BuildArtifactFileBaseName}.map"/>
+<listOptionValue builtIn="false" value="--gc-sections"/>
+</option>
+<option id="com.crt.advproject.link.gcc.hdrlib.1099502274" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.none" valueType="enumerated"/>
+<option id="gnu.c.link.option.paths.1394085330" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
+<listOptionValue builtIn="false" value=""${workspace_loc:/CMSISv1p30_LPC13xx/Debug}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/FreeRTOS_Library/Debug}""/>
+</option>
+<option id="gnu.c.link.option.libs.225964807" name="Libraries (-l)" superClass="gnu.c.link.option.libs" valueType="libs">
+<listOptionValue builtIn="false" value="FreeRTOS_Library"/>
+<listOptionValue builtIn="false" value="CMSISv1p30_LPC13xx"/>
+</option>
+<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1634850217" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
+<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+</inputType>
+</tool>
+</toolChain>
+</folderInfo>
+<fileInfo id="com.crt.advproject.config.exe.debug.1738945474.src/cr_startup_lpc13.c" name="cr_startup_lpc13.c" rcbsApplicability="disable" resourcePath="src/cr_startup_lpc13.c" toolsToInvoke="com.crt.advproject.gcc.exe.debug.190059530.755152115">
+<tool errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.190059530.755152115" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug.190059530">
+<option id="gnu.c.compiler.option.optimization.flags.1938885338" name="Other optimization flags" superClass="gnu.c.compiler.option.optimization.flags" value="-Os" valueType="string"/>
+<inputType id="com.crt.advproject.compiler.input.2093162124" superClass="com.crt.advproject.compiler.input"/>
+</tool>
+</fileInfo>
+<sourceEntries>
+<entry excluding="Kopie von main.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="src"/>
+</sourceEntries>
+</configuration>
+</storageModule>
+<storageModule moduleId="scannerConfiguration">
+<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+<buildOutputProvider>
+<openAction enabled="false" filePath=""/>
+<parser enabled="false"/>
+</buildOutputProvider>
+<scannerInfoProvider id="com.crt.advproject.specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="false" filePath=""/>
+<parser enabled="false"/>
+</buildOutputProvider>
+<scannerInfoProvider id="com.crt.advproject.specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="false" filePath=""/>
+<parser enabled="false"/>
+</buildOutputProvider>
+<scannerInfoProvider id="com.crt.advproject.specsFile">
+<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="makefileGenerator">
+<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+</storageModule>
+<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
+<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cconfiguration>
+<cconfiguration id="com.crt.advproject.config.exe.release.1384247445">
+<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.release.1384247445" moduleId="org.eclipse.cdt.core.settings" name="Release">
+<externalSettings/>
+<extensions>
+<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+</extensions>
+</storageModule>
+<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+<configuration artifactExtension="axf" artifactName="MurSatMPU" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="Release build" errorParsers="org.eclipse.cdt.core.MakeErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.config.exe.release.1384247445" name="Release" parent="com.crt.advproject.config.exe.release" postannouncebuildStep="Performing post-build steps" postbuildStep="arm-none-eabi-size ${BuildArtifactFileName}; # arm-none-eabi-objcopy -O binary ${BuildArtifactFileName} ${BuildArtifactFileBaseName}.bin ; checksum -p ${TargetChip} -d ${BuildArtifactFileBaseName}.bin; ">
+<folderInfo id="com.crt.advproject.config.exe.release.1384247445." name="/" resourcePath="">
+<toolChain id="com.crt.advproject.toolchain.exe.release.669870655" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.release">
+<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.release.482830829" name="ARM-based MCU (Release)" superClass="com.crt.advproject.platform.exe.release"/>
+<builder buildPath="${workspace_loc:/MurSatMPU/Release}" id="com.crt.advproject.builder.exe.release.137789001" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.release"/>
+<tool id="com.crt.advproject.cpp.exe.release.1277319366" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.release"/>
+<tool id="com.crt.advproject.gcc.exe.release.1360046805" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.release">
+<option id="com.crt.advproject.gcc.arch.1595579898" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
+<option id="com.crt.advproject.gcc.thumb.1549474566" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
+<option id="gnu.c.compiler.option.preprocessor.def.symbols.1790617253" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
+<listOptionValue builtIn="false" value="NDEBUG"/>
+<listOptionValue builtIn="false" value="__USE_CMSIS=CMSISv1p30_LPC13xx"/>
+<listOptionValue builtIn="false" value="__CODE_RED"/>
+<listOptionValue builtIn="false" value="__REDLIB__"/>
+</option>
+<option id="gnu.c.compiler.option.misc.other.322791741" name="Other flags" superClass="gnu.c.compiler.option.misc.other" value="-c -fmessage-length=0 -fno-builtin -ffunction-sections -fdata-sections" valueType="string"/>
+<option id="gnu.c.compiler.option.optimization.flags.1760519729" name="Other optimization flags" superClass="gnu.c.compiler.option.optimization.flags" value="-Os" valueType="string"/>
+<option id="com.crt.advproject.gcc.hdrlib.1309483613" name="Use headers for C library" superClass="com.crt.advproject.gcc.hdrlib" value="com.crt.advproject.gcc.hdrlib.codered" valueType="enumerated"/>
+<option id="gnu.c.compiler.option.include.paths.1580540827" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
+<listOptionValue builtIn="false" value=""${workspace_loc:/FreeRTOS_Library/portable}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/MurSatMPU/inc}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/FreeRTOS_Library/include}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/CMSISv1p30_LPC13xx/inc}""/>
+</option>
+<inputType id="com.crt.advproject.compiler.input.2081038765" superClass="com.crt.advproject.compiler.input"/>
+</tool>
+<tool id="com.crt.advproject.gas.exe.release.1928760876" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.release">
+<option id="com.crt.advproject.gas.arch.2123010044" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
+<option id="com.crt.advproject.gas.thumb.795553007" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
+<option id="gnu.both.asm.option.flags.crt.1617651284" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -DNDEBUG -D__CODE_RED -D__REDLIB__ " valueType="string"/>
+<option id="com.crt.advproject.gas.hdrlib.1373570016" name="Use headers for C library" superClass="com.crt.advproject.gas.hdrlib" value="com.crt.advproject.gas.hdrlib.codered" valueType="enumerated"/>
+<inputType id="com.crt.advproject.assembler.input.854572372" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
+</tool>
+<tool id="com.crt.advproject.link.cpp.exe.release.798661504" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.release"/>
+<tool id="com.crt.advproject.link.exe.release.512241513" name="MCU Linker" superClass="com.crt.advproject.link.exe.release">
+<option id="com.crt.advproject.link.arch.1341036159" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
+<option id="com.crt.advproject.link.thumb.929477696" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
+<option id="com.crt.advproject.link.script.1210653385" name="Linker script" superClass="com.crt.advproject.link.script" value=""MurSatMPU_Release.ld"" valueType="string"/>
+<option id="com.crt.advproject.link.manage.585113666" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
+<option id="gnu.c.link.option.nostdlibs.1987839701" name="No startup or default libs (-nostdlib)" superClass="gnu.c.link.option.nostdlibs" value="true" valueType="boolean"/>
+<option id="gnu.c.link.option.other.1109061791" name="Other options (-Xlinker [option])" superClass="gnu.c.link.option.other" valueType="stringList">
+<listOptionValue builtIn="false" value="-Map=${BuildArtifactFileBaseName}.map"/>
+<listOptionValue builtIn="false" value="--gc-sections"/>
+</option>
+<option id="com.crt.advproject.link.gcc.hdrlib.873734360" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.none" valueType="enumerated"/>
+<option id="gnu.c.link.option.libs.2063692015" name="Libraries (-l)" superClass="gnu.c.link.option.libs" valueType="libs">
+<listOptionValue builtIn="false" value="FreeRTOS_Library"/>
+<listOptionValue builtIn="false" value="CMSISv1p30_LPC13xx"/>
+</option>
+<option id="gnu.c.link.option.paths.796834638" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
+<listOptionValue builtIn="false" value=""${workspace_loc:/CMSISv1p30_LPC13xx/Release}""/>
+<listOptionValue builtIn="false" value=""${workspace_loc:/FreeRTOS_Library/Debug}""/>
+</option>
+<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1796290219" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
+<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+</inputType>
+</tool>
+</toolChain>
+</folderInfo>
+<sourceEntries>
+<entry excluding="Kopie von main.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="src"/>
+</sourceEntries>
+</configuration>
+</storageModule>
+<storageModule moduleId="scannerConfiguration">
+<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+<buildOutputProvider>
+<openAction enabled="false" filePath=""/>
+<parser enabled="false"/>
+</buildOutputProvider>
+<scannerInfoProvider id="com.crt.advproject.specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="false" filePath=""/>
+<parser enabled="false"/>
+</buildOutputProvider>
+<scannerInfoProvider id="com.crt.advproject.specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="false" filePath=""/>
+<parser enabled="false"/>
+</buildOutputProvider>
+<scannerInfoProvider id="com.crt.advproject.specsFile">
+<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="makefileGenerator">
+<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+<buildOutputProvider>
+<openAction enabled="true" filePath=""/>
+<parser enabled="true"/>
+</buildOutputProvider>
+<scannerInfoProvider id="specsFile">
+<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>
+<parser enabled="true"/>
+</scannerInfoProvider>
+</profile>
+</storageModule>
+<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
+<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cconfiguration>
+</storageModule>
+<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+<project id="MurSatMPU.com.crt.advproject.projecttype.exe.635983239" name="Executable" projectType="com.crt.advproject.projecttype.exe"/>
+</storageModule>
+<storageModule moduleId="com.crt.config">
+<projectStorage><?xml version="1.0" encoding="UTF-8"?>
+<TargetConfig>
+<Properties property_0="" property_1="" property_2="" property_3="NXP" property_4="LPC1343" property_count="5" version="1"/>
+<infoList vendor="NXP"><info chip="LPC1343" match_id="0x3d00002b" name="LPC1343" stub="crt_emu_lpc11_13_nxp"><chip><name>LPC1343</name>
+<family>LPC13xx</family>
+<vendor>NXP (formerly Philips)</vendor>
+<reset board="None" core="Real" sys="Real"/>
+<clock changeable="TRUE" freq="12MHz" is_accurate="TRUE"/>
+<memory can_program="true" id="Flash" is_ro="true" type="Flash"/>
+<memory id="RAM" type="RAM"/>
+<memory id="Periph" is_volatile="true" type="Peripheral"/>
+<memoryInstance derived_from="Flash" id="MFlash32" location="0x00000000" size="0x8000"/>
+<memoryInstance derived_from="RAM" id="RamLoc8" location="0x10000000" size="0x2000"/>
+<prog_flash blocksz="0x1000" location="0" maxprgbuff="0x1000" progwithcode="TRUE" size="0x8000"/>
+<peripheralInstance derived_from="LPC17_NVIC" determined="infoFile" id="NVIC" location="0xE000E000"/>
+<peripheralInstance derived_from="LPC11_13_TIMER32" determined="infoFile" id="TIMER0" location="0x40014000"/>
+<peripheralInstance derived_from="LPC11_13_TIMER32" determined="infoFile" id="TIMER1" location="0x40018000"/>
+<peripheralInstance derived_from="LPC1xxx_UART_MODEM" determined="infoFile" id="UART0" location="0x40008000"/>
+<peripheralInstance derived_from="LPC11_13_SSP" determined="infoFile" id="SSP" location="0x40040000"/>
+<peripheralInstance derived_from="LPC11_13_ADC" determined="infoFile" id="ADC" location="0x4001c000"/>
+<peripheralInstance derived_from="LPC11_13_I2C" determined="infoFile" id="I2C0" location="0x40000000"/>
+<peripheralInstance derived_from="CM3_DCR" determined="infoFile" id="DCR" location="0xE000EDF0"/>
+<peripheralInstance derived_from="LPC13_SYSCTL" determined="infoFile" id="SYSCTL" location="0x40048000"/>
+<peripheralInstance derived_from="LPC11_13_PMU" determined="infoFile" id="PMU" location="0x40038000"/>
+<peripheralInstance derived_from="LPC11_13_IOCON" determined="infoFile" id="IOCON" location="0x40044000"/>
+<peripheralInstance derived_from="LPC11_13_GPIO" determined="infoFile" id="GPIO0" location="0x50000000"/>
+<peripheralInstance derived_from="LPC11_13_GPIO" determined="infoFile" id="GPIO1" location="0x50010000"/>
+<peripheralInstance derived_from="LPC11_13_GPIO" determined="infoFile" id="GPIO2" location="0x50020000"/>
+<peripheralInstance derived_from="LPC11_13_GPIO" determined="infoFile" id="GPIO3" location="0x50030000"/>
+<peripheralInstance derived_from="LPC11_13_TIMER16" determined="infoFile" id="TMR160" location="0x4000c000"/>
+<peripheralInstance derived_from="LPC11_13_TIMER16" determined="infoFile" id="TMR161" location="0x40010000"/>
+<peripheralInstance derived_from="LPC11_13_USBDEV" determined="infoFile" id="USB" location="0x40020000"/>
+<peripheralInstance derived_from="LPC11_13_WDT" determined="infoFile" id="WDT" location="0x40004000"/>
+</chip>
+<processor><name gcc_name="cortex-m3">Cortex-M3</name>
+<family>Cortex-M</family>
+</processor>
+<link href="nxp_lpc11_13_peripheral.xme" show="embed" type="simple"/>
+</info>
+</infoList>
+</TargetConfig></projectStorage>
+</storageModule>
+</cproject>
diff --git a/software/mpu.old/.project b/software/mpu.old/.project new file mode 100644 index 0000000..fafd42f --- /dev/null +++ b/software/mpu.old/.project @@ -0,0 +1,81 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>MurSatMPU</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ <dictionary>
+ <key>?name?</key>
+ <value></value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.append_environment</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+ <value>all</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.buildArguments</key>
+ <value></value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.buildCommand</key>
+ <value>make</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.buildLocation</key>
+ <value>${workspace_loc:/MurSatMPU/Debug}</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+ <value>clean</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.contents</key>
+ <value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+ <value>false</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.enableFullBuild</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+ <value>all</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.stopOnError</key>
+ <value>true</value>
+ </dictionary>
+ <dictionary>
+ <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+ <value>true</value>
+ </dictionary>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+</projectDescription>
diff --git a/software/mpu.old/MurSatMPU Debug.launch b/software/mpu.old/MurSatMPU Debug.launch new file mode 100644 index 0000000..5b51271 --- /dev/null +++ b/software/mpu.old/MurSatMPU Debug.launch @@ -0,0 +1,32 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.crt.ctrlcenter.idleNative2">
+<stringAttribute key=".gdbinit" value=""/>
+<stringAttribute key="com.crt.ctrlcenter.targetbase" value="NXP LPC1300 (*)"/>
+<stringAttribute key="com.crt.ctrlcenter.targetconfig" value="<?xml version="1.0" encoding="UTF-8"?> <config chipvendor="NXP" genname="NXP LPC1300" id="config.gdb.stub"><parameters><params><param description="Enter as XTAL[,PLL]. PLL is optional. Values are in kHz" name="Crystal (XTAL) frequency and PLL value" required="false" type="nullString" var="xtal.hz"/> </params> <initValue value="false" var="vector.catch"/> <params><param default="true" description="Vector catch" name="Vector catch" value="false" var="vector.catch"><enum value="True"/> <enum value="False"/> </param> </params> <params><param default="true" description="Enable Red Trace" name="Enable Red Trace " value="true" var="swv.enable"><enum value="true"/> <enum value="false"/> </param> </params> <params><param default="Auto" description="Enablement of semihosting support" name="Semihosting support" value="Auto" var="internal.semihost"><enum value="On"/> <enum value="Off"/> <enum value="Auto"/> </param> </params> <params><param default="" description="Switch debug interface between SWD and JTAG (leave blank for default [SWD])" name="Debug interface" option="" value="" var="internal.debug.interface"><enum value=""/> <enum value="JTAG"/> <enum value="SWD"/> </param> </params> <params><param default="" description="Maximum wire speed in KHz (leave blank to Auto-detect). Not all values are supported by all targets" name="Maximum wire speed" type="nullString" value="" var="emu.speed"><enum value=""/> <enum value="30000"/> <enum value="15000"/> <enum value="10000"/> <enum value="7500"/> <enum value="6000"/> <enum value="5000"/> <enum value="3750"/> <enum value="3000"/> <enum value="2500"/> <enum value="2000"/> <enum value="1500"/> <enum value="1250"/> <enum value="1200"/> <enum value="1000"/> <enum value="750"/> <enum value="600"/> <enum value="500"/> <enum value="400"/> <enum value="300"/> <enum value="250"/> <enum value="200"/> <enum value="150"/> </param> </params> <params><param default="" description="Additional options" name="Additional options" value="" var="misc.options"/> <param default="2" description="Set stub debug level (1-4)" name="Debug Level " value="2" var="debug.level"/> <param default="True" description="when True, executable image will be loaded into the target" name="Load image" type="boolean" value="True" var="load"><enum value="True"/> <enum value="False"/> </param> <param default="cont" description="Run, continue or (do nothing)" name="Run/Continue image" value="cont" var="run"><enum value="run"/> <enum value="cont"/> <enum value=""/> </param> <param default="off" description="If on is specified, make the debugger treat unknown memory as non-existent and refuse \naccesses to such memory. If off is specified, treat the memory as RAM" name="Memory Access Checking" value="off" var="mem.access"><enum value="on"/> <enum value="off"/> </param> <param default="cont" description="choose the disconnect behavior for the target" name="Disconnect behavior" value="cont" var="ondisconnect"><enum value="nochange"/> <enum value="stop"/> <enum value="cont"/> <enum value="run_cont"/> </param> </params> </parameters> <script emulators="${gdb.stub} -mi -info-emu" silent="false" swv="true" type="init">set remotetimeout 60000&#x0A;target extended-remote | ${gdb.stub} -g -mi -${debug.level:2} ${-c+speed:$null} ${-s+emu.speed:$null} ${-p+package:$null} ${-e+emulator:$null} ${vector.catch?-vc:} ${misc.options}&#x0A;set mem inaccessible-by-default ${mem.access}&#x0A;mon ondisconnect ${ondisconnect}&#x0A;set arm force-mode thumb&#x0A;${load}</script> <script silent="false" type="run">${run}</script> </config> "/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.GDB_INIT" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.breakpointsFullPath" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="com.crt.ctrlcenter.cmdfactory"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.crt.ctrlcenter.CRTEmbeddedCDebugger"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="pData-Msg-kernel_Process_Task-(cast)" val="char*"/><content id="*pxQueue_Kernel-pxQueue_Kernel-boot_CreateQueues-(cast_to_array)" val="0:1"/><content id="u-prvLoopBackTestTask-(format)" val="1"/><content id="pData-Msg-lightsens_Process_Task-(cast)" val="unsigned char*"/><content id="pData-Msg-lightsens_Process_Task-(cast_to_array)" val="0:10"/><content id="BufferPtr-UARTSend-(cast_to_array)" val="0:10"/><content id="pData-RcvMsg-kernel_Process_Task-(cast_to_array)" val="0:10"/></contentList>"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug\MurSatMPU.axf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="MurSatMPU"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.crt.advproject.config.exe.debug.1738945474"/>
+<booleanAttribute key="org.eclipse.cdt.launch.use_terminal" value="false"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/MurSatMPU"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/software/mpu.old/MurSatMPU Release.launch b/software/mpu.old/MurSatMPU Release.launch new file mode 100644 index 0000000..8183be3 --- /dev/null +++ b/software/mpu.old/MurSatMPU Release.launch @@ -0,0 +1,28 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.crt.ctrlcenter.idleNative2">
+<stringAttribute key=".gdbinit" value=""/>
+<stringAttribute key="com.crt.ctrlcenter.targetbase" value="NXP LPC1300 (*)"/>
+<stringAttribute key="com.crt.ctrlcenter.targetconfig" value="<?xml version="1.0" encoding="UTF-8"?> <config chipvendor="NXP" genname="NXP LPC1300" id="config.gdb.stub"><parameters><params><param description="Enter as XTAL[,PLL]. PLL is optional. Values are in kHz" name="Crystal (XTAL) frequency and PLL value" required="false" type="nullString" var="xtal.hz"/> </params> <initValue value="false" var="vector.catch"/> <params><param default="true" description="Vector catch" name="Vector catch" value="false" var="vector.catch"><enum value="True"/> <enum value="False"/> </param> </params> <params><param default="true" description="Enable Red Trace" name="Enable Red Trace " value="true" var="swv.enable"><enum value="true"/> <enum value="false"/> </param> </params> <params><param default="Auto" description="Enablement of semihosting support" name="Semihosting support" value="Auto" var="internal.semihost"><enum value="On"/> <enum value="Off"/> <enum value="Auto"/> </param> </params> <params><param default="" description="Switch debug interface between SWD and JTAG (leave blank for default [SWD])" name="Debug interface" option="" value="" var="internal.debug.interface"><enum value=""/> <enum value="JTAG"/> <enum value="SWD"/> </param> </params> <params><param default="" description="Maximum wire speed in KHz (leave blank to Auto-detect). Not all values are supported by all targets" name="Maximum wire speed" type="nullString" value="" var="emu.speed"><enum value=""/> <enum value="30000"/> <enum value="15000"/> <enum value="10000"/> <enum value="7500"/> <enum value="6000"/> <enum value="5000"/> <enum value="3750"/> <enum value="3000"/> <enum value="2500"/> <enum value="2000"/> <enum value="1500"/> <enum value="1250"/> <enum value="1200"/> <enum value="1000"/> <enum value="750"/> <enum value="600"/> <enum value="500"/> <enum value="400"/> <enum value="300"/> <enum value="250"/> <enum value="200"/> <enum value="150"/> </param> </params> <params><param default="" description="Additional options" name="Additional options" value="" var="misc.options"/> <param default="2" description="Set stub debug level (1-4)" name="Debug Level " value="2" var="debug.level"/> <param default="True" description="when True, executable image will be loaded into the target" name="Load image" type="boolean" value="True" var="load"><enum value="True"/> <enum value="False"/> </param> <param default="cont" description="Run, continue or (do nothing)" name="Run/Continue image" value="cont" var="run"><enum value="run"/> <enum value="cont"/> <enum value=""/> </param> <param default="off" description="If on is specified, make the debugger treat unknown memory as non-existent and refuse \naccesses to such memory. If off is specified, treat the memory as RAM" name="Memory Access Checking" value="off" var="mem.access"><enum value="on"/> <enum value="off"/> </param> <param default="cont" description="choose the disconnect behavior for the target" name="Disconnect behavior" value="cont" var="ondisconnect"><enum value="nochange"/> <enum value="stop"/> <enum value="cont"/> <enum value="run_cont"/> </param> </params> </parameters> <script emulators="${gdb.stub} -mi -info-emu" silent="false" swv="true" type="init">set remotetimeout 60000&#x0A;target extended-remote | ${gdb.stub} -g -mi -${debug.level:2} ${-c+speed:$null} ${-s+emu.speed:$null} ${-p+package:$null} ${-e+emulator:$null} ${vector.catch?-vc:} ${misc.options}&#x0A;set mem inaccessible-by-default ${mem.access}&#x0A;mon ondisconnect ${ondisconnect}&#x0A;set arm force-mode thumb&#x0A;${load}</script> <script silent="false" type="run">${run}</script> </config> "/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.GDB_INIT" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.breakpointsFullPath" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="com.crt.ctrlcenter.cmdfactory"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.crt.ctrlcenter.CRTEmbeddedCDebugger"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Release\MurSatMPU.axf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="MurSatMPU"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.crt.advproject.config.exe.release.1384247445"/>
+<booleanAttribute key="org.eclipse.cdt.launch.use_terminal" value="false"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/MurSatMPU"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/software/mpu.old/inc/FreeRTOSConfig.h b/software/mpu.old/inc/FreeRTOSConfig.h new file mode 100644 index 0000000..5ddf25c --- /dev/null +++ b/software/mpu.old/inc/FreeRTOSConfig.h @@ -0,0 +1,108 @@ +/*
+ FreeRTOS V6.0.0 - Copyright (C) 2009 Real Time Engineers Ltd.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+/******************************************************************************
+ See http://www.freertos.org/a00110.html for an explanation of the
+ definitions contained in this file.
+******************************************************************************/
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+#include "LPC13xx.h"
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *----------------------------------------------------------*/
+
+extern unsigned int SystemCoreClock;
+
+#define configUSE_PREEMPTION 1
+#define configUSE_IDLE_HOOK 0
+#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )
+#define configUSE_TICK_HOOK 0
+#define configCPU_CLOCK_HZ ( ( unsigned long ) SystemCoreClock )
+#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
+#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 100 )
+#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2 * 1024 ) )
+#define configMAX_TASK_NAME_LEN ( 12 )
+#define configUSE_TRACE_FACILITY 0
+#define configUSE_16_BIT_TICKS 0
+#define configIDLE_SHOULD_YIELD 0
+#define configUSE_CO_ROUTINES 0
+#define configUSE_MUTEXES 1
+
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+#define configUSE_COUNTING_SEMAPHORES 1
+#define configUSE_ALTERNATIVE_API 0
+#define configCHECK_FOR_STACK_OVERFLOW 0
+#define configUSE_RECURSIVE_MUTEXES 0
+#define configQUEUE_REGISTRY_SIZE 0
+#define configGENERATE_RUN_TIME_STATS 0
+#define configUSE_MALLOC_FAILED_HOOK 0
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet 1
+#define INCLUDE_uxTaskPriorityGet 1
+#define INCLUDE_vTaskDelete 1
+#define INCLUDE_vTaskCleanUpResources 0
+#define INCLUDE_vTaskSuspend 1
+#define INCLUDE_vTaskDelayUntil 1
+#define INCLUDE_vTaskDelay 1
+#define INCLUDE_uxTaskGetStackHighWaterMark 0
+
+/* Use the system definition, if there is one */
+#ifdef __NVIC_PRIO_BITS
+ #define configPRIO_BITS __NVIC_PRIO_BITS
+#else
+ #define configPRIO_BITS 5 /* 32 priority levels */
+#endif
+
+/* The lowest priority. */
+#define configKERNEL_INTERRUPT_PRIORITY ( 31 << (8 - configPRIO_BITS) )
+/* Priority 5, or 160 as only the top three bits are implemented. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << (8 - configPRIO_BITS) )
+
+
+
+#endif /* FREERTOS_CONFIG_H */
+
diff --git a/software/mpu.old/inc/Types.h b/software/mpu.old/inc/Types.h new file mode 100644 index 0000000..9cb0101 --- /dev/null +++ b/software/mpu.old/inc/Types.h @@ -0,0 +1,45 @@ +#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+#define MS(ms) portTICK_RATE_MS * (ms)
+
+/* Status_t*/
+typedef enum
+{
+ STATUS_OK = 0x0U,
+ STATUS_ERROR_INIT,
+ STATUS_ERROR_SND,
+ STATUS_ERROR_RCV,
+ STATUS_ERROR_TIMEOUT
+}Status_t;
+
+/* Sender_t */
+typedef enum
+{
+ Sender_Kernel = 0x0,
+ Sender_Camera,
+ Sender_Spi,
+ Sender_LightSens,
+ Sender_UART
+}Sender_t;
+
+/* Message_t */
+typedef struct
+{
+ void *pData;
+ Sender_t Sender;
+}Message_t;
+
+typedef struct
+{
+ xQueueHandle hxq_Kernel;
+ xQueueHandle hxq_Camera;
+ xQueueHandle hxq_LightSens;
+}QH_t;
+
+typedef struct
+{
+ xTaskHandle hxTask_Self;
+ QH_t QueueHandles;
+}Task_Param_t;
diff --git a/software/mpu.old/inc/ssp.h b/software/mpu.old/inc/ssp.h new file mode 100644 index 0000000..e910a4d --- /dev/null +++ b/software/mpu.old/inc/ssp.h @@ -0,0 +1,112 @@ +/*****************************************************************************
+ * ssp.h: Header file for NXP LPC134x Family Microprocessors
+ *
+ * Copyright(C) 2006, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2006.07.19 ver 1.00 Preliminary version, first Release
+ *
+******************************************************************************/
+#ifndef __SSP_H__
+#define __SSP_H__
+
+/* There are there modes in SSP: loopback, master or slave. */
+/* Here are the combination of all the tests.
+(1) LOOPBACK test: LOOPBACK_MODE=1, TX_RX_ONLY=0, USE_CS=1;
+(2) Serial EEPROM test: LOOPBACK_MODE=0, TX_RX_ONLY=0, USE_CS=0; (default)
+(3) TX(Master) Only: LOOPBACK_MODE=0, SSP_SLAVE=0, TX_RX_ONLY=1, USE_CS=1;
+(4) RX(Slave) Only: LOOPBACK_MODE=0, SSP_SLAVE=1, TX_RX_ONLY=0, USE_CS=1 */
+
+#define LOOPBACK_MODE 1 /* 1 is loopback, 0 is normal operation. */
+#define SSP_SLAVE 0 /* 1 is SLAVE mode, 0 is master mode */
+#define TX_RX_ONLY 0 /* 1 is TX or RX only depending on SSP_SLAVE
+ flag, 0 is either loopback mode or communicate
+ with a serial EEPROM. */
+
+/* if USE_CS is zero, set SSEL as GPIO that you have total control of the sequence */
+/* When test serial SEEPROM(LOOPBACK_MODE=0, TX_RX_ONLY=0), set USE_CS to 0. */
+/* When LOOPBACK_MODE=1 or TX_RX_ONLY=1, set USE_CS to 1. */
+
+#define USE_CS 1
+#define SSP_DEBUG 0
+
+/* SPI read and write buffer size */
+#define SSP_BUFSIZE 16
+#define FIFOSIZE 8
+
+#define DELAY_COUNT 10
+#define MAX_TIMEOUT 0xFF
+
+/* Port0.2 is the SSP select pin */
+#define SSP0_SEL (1 << 2)
+
+/* SSP Status register */
+#define SSPSR_TFE (1 << 0)
+#define SSPSR_TNF (1 << 1)
+#define SSPSR_RNE (1 << 2)
+#define SSPSR_RFF (1 << 3)
+#define SSPSR_BSY (1 << 4)
+
+/* SSP CR0 register */
+#define SSPCR0_DSS (1 << 0)
+#define SSPCR0_FRF (1 << 4)
+#define SSPCR0_SPO (1 << 6)
+#define SSPCR0_SPH (1 << 7)
+#define SSPCR0_SCR (1 << 8)
+
+/* SSP CR1 register */
+#define SSPCR1_LBM (1 << 0)
+#define SSPCR1_SSE (1 << 1)
+#define SSPCR1_MS (1 << 2)
+#define SSPCR1_SOD (1 << 3)
+
+/* SSP Interrupt Mask Set/Clear register */
+#define SSPIMSC_RORIM (1 << 0)
+#define SSPIMSC_RTIM (1 << 1)
+#define SSPIMSC_RXIM (1 << 2)
+#define SSPIMSC_TXIM (1 << 3)
+
+/* SSP0 Interrupt Status register */
+#define SSPRIS_RORRIS (1 << 0)
+#define SSPRIS_RTRIS (1 << 1)
+#define SSPRIS_RXRIS (1 << 2)
+#define SSPRIS_TXRIS (1 << 3)
+
+/* SSP0 Masked Interrupt register */
+#define SSPMIS_RORMIS (1 << 0)
+#define SSPMIS_RTMIS (1 << 1)
+#define SSPMIS_RXMIS (1 << 2)
+#define SSPMIS_TXMIS (1 << 3)
+
+/* SSP0 Interrupt clear register */
+#define SSPICR_RORIC (1 << 0)
+#define SSPICR_RTIC (1 << 1)
+
+/* ATMEL SEEPROM command set */
+#define WREN 0x06 /* MSB A8 is set to 0, simplifying test */
+#define WRDI 0x04
+#define RDSR 0x05
+#define WRSR 0x01
+#define READ 0x03
+#define WRITE 0x02
+
+/* RDSR status bit definition */
+#define RDSR_RDY 0x01
+#define RDSR_WEN 0x02
+
+/* If RX_INTERRUPT is enabled, the SSP RX will be handled in the ISR
+SSPReceive() will not be needed. */
+extern void SSP_IRQHandler (void);
+extern void SSPInit( void );
+extern void SSPSend( uint8_t *Buf, uint32_t Length );
+extern void SSPReceive( uint8_t *buf, uint32_t Length );
+
+extern uint8_t src_addr[SSP_BUFSIZE];
+extern uint8_t dest_addr[SSP_BUFSIZE];
+extern void LoopbackTest( void );
+#endif /* __SSP_H__ */
+/*****************************************************************************
+** End Of File
+******************************************************************************/
+
diff --git a/software/mpu.old/src/adc.c b/software/mpu.old/src/adc.c new file mode 100644 index 0000000..1c1f45a --- /dev/null +++ b/software/mpu.old/src/adc.c @@ -0,0 +1,250 @@ +/*****************************************************************************
+ * main.c: Main C file for NXP LPC13xx Family Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2008.07.20 ver 1.00 Preliminary version, first Release
+ *
+*****************************************************************************/
+#include "LPC13xx.h" /* LPC13xx Peripheral Registers */
+#include "adc.h"
+
+volatile uint32_t ADCValue[ADC_NUM];
+volatile uint32_t ADCIntDone = 0;
+
+#if BURST_MODE
+volatile uint32_t channel_flag;
+#endif
+
+#if ADC_INTERRUPT_FLAG
+/******************************************************************************
+** Function name: ADC_IRQHandler
+**
+** Descriptions: ADC interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+******************************************************************************/
+void ADC_IRQHandler (void)
+{
+ uint32_t regVal;
+
+ LPC_ADC->CR &= 0xF8FFFFFF; /* stop ADC now */
+ regVal = LPC_ADC->STAT; /* Read ADC will clear the interrupt */
+ if ( regVal & 0x0000FF00 ) /* check OVERRUN error first */
+ {
+ regVal = (regVal & 0x0000FF00) >> 0x08;
+ /* if overrun, just read ADDR to clear */
+ /* regVal variable has been reused. */
+ switch ( regVal )
+ {
+ case 0x01:
+ regVal = LPC_ADC->DR0;
+ break;
+ case 0x02:
+ regVal = LPC_ADC->DR1;
+ break;
+ case 0x04:
+ regVal = LPC_ADC->DR2;
+ break;
+ case 0x08:
+ regVal = LPC_ADC->DR3;
+ break;
+ case 0x10:
+ regVal = LPC_ADC->DR4;
+ break;
+ case 0x20:
+ regVal = LPC_ADC->DR5;
+ break;
+ case 0x40:
+ regVal = LPC_ADC->DR6;
+ break;
+ case 0x80:
+ regVal = LPC_ADC->DR7;
+ break;
+ default:
+ break;
+ }
+ LPC_ADC->CR &= 0xF8FFFFFF; /* stop ADC now */
+ ADCIntDone = 1;
+ return;
+ }
+
+ if ( regVal & ADC_ADINT )
+ {
+ switch ( regVal & 0xFF ) /* check DONE bit */
+ {
+ case 0x01:
+ ADCValue[0] = ( LPC_ADC->DR0 >> 6 ) & 0x3FF;
+ break;
+ case 0x02:
+ ADCValue[1] = ( LPC_ADC->DR1 >> 6 ) & 0x3FF;
+ break;
+ case 0x04:
+ ADCValue[2] = ( LPC_ADC->DR2 >> 6 ) & 0x3FF;
+ break;
+ case 0x08:
+ ADCValue[3] = ( LPC_ADC->DR3 >> 6 ) & 0x3FF;
+ break;
+ case 0x10:
+ ADCValue[4] = ( LPC_ADC->DR4 >> 6 ) & 0x3FF;
+ break;
+ case 0x20:
+ ADCValue[5] = ( LPC_ADC->DR5 >> 6 ) & 0x3FF;
+ break;
+ case 0x40:
+ ADCValue[6] = ( LPC_ADC->DR6 >> 6 ) & 0x3FF;
+ break;
+ case 0x80:
+ ADCValue[7] = ( LPC_ADC->DR7 >> 6 ) & 0x3FF;
+ break;
+ default:
+ break;
+ }
+#if BURST_MODE
+ channel_flag |= (regVal & 0xFF);
+ if ( (channel_flag & 0xFF) == 0xFF )
+ {
+ /* All the bits in have been set, it indicates all the ADC
+ channels have been converted. */
+ LPC_ADC->CR &= 0xF8FFFFFF; /* stop ADC now */
+ }
+#endif
+ ADCIntDone = 1;
+ }
+ return;
+}
+#endif
+
+/*****************************************************************************
+** Function name: ADCInit
+**
+** Descriptions: initialize ADC channel
+**
+** parameters: ADC clock rate
+** Returned value: None
+**
+*****************************************************************************/
+void ADCInit( uint32_t ADC_Clk )
+{
+ /* Disable Power down bit to the ADC block. */
+ LPC_SYSCON->PDRUNCFG &= ~(0x1<<4);
+
+ /* Enable AHB clock to the ADC. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<13);
+
+ /* Unlike some other pings, for ADC test, all the pins need
+ to set to analog mode. Bit 7 needs to be cleared according
+ to design team. */
+#ifdef __JTAG_DISABLED
+ LPC_IOCON->JTAG_TDI_PIO0_11 &= ~0x8F; /* ADC I/O config */
+ LPC_IOCON->JTAG_TDI_PIO0_11 |= 0x02; /* ADC IN0 */
+ LPC_IOCON->JTAG_TMS_PIO1_0 &= ~0x8F;
+ LPC_IOCON->JTAG_TMS_PIO1_0 |= 0x02; /* ADC IN1 */
+ LPC_IOCON->JTAG_TDO_PIO1_1 &= ~0x8F;
+ LPC_IOCON->JTAG_TDO_PIO1_1 |= 0x02; /* ADC IN2 */
+ LPC_IOCON->JTAG_nTRST_PIO1_2 &= ~0x8F;
+ LPC_IOCON->JTAG_nTRST_PIO1_2 |= 0x02; /* ADC IN3 */
+#ifdef __SWD_DISABLED
+ LPC_IOCON->ARM_SWDIO_PIO1_3 &= ~0x8F;
+ LPC_IOCON->ARM_SWDIO_PIO1_3 |= 0x02; /* ADC IN4 */
+#endif
+#endif
+ LPC_IOCON->JTAG_TDI_PIO0_11 = 0x02; // Select AD0 pin function
+ LPC_IOCON->JTAG_TMS_PIO1_0 = 0x02; // Select AD1 pin function
+ LPC_IOCON->JTAG_TDO_PIO1_1 = 0x02; // Select AD2 pin function
+ LPC_IOCON->JTAG_nTRST_PIO1_2 = 0x02; // Select AD3 pin function
+// LPC_IOCON->ARM_SWDIO_PIO1_3 = 0x02; // Select AD4 pin function
+ LPC_IOCON->PIO1_4 = 0x01; // Select AD5 pin function
+ LPC_IOCON->PIO1_10 = 0x01; // Select AD6 pin function
+ LPC_IOCON->PIO1_11 = 0x01; // Select AD7 pin function
+
+ LPC_ADC->CR = ((SystemCoreClock/LPC_SYSCON->SYSAHBCLKDIV)/ADC_Clk-1)<<8;
+
+ /* If POLLING, no need to do the following */
+#if ADC_INTERRUPT_FLAG
+ NVIC_EnableIRQ(ADC_IRQn);
+ LPC_ADC->INTEN = 0x1FF; /* Enable all interrupts */
+#endif
+ return;
+}
+
+/*****************************************************************************
+** Function name: ADCRead
+**
+** Descriptions: Read ADC channel
+**
+** parameters: Channel number
+** Returned value: Value read, if interrupt driven, return channel #
+**
+*****************************************************************************/
+uint32_t ADCRead( uint8_t channelNum )
+{
+#if !ADC_INTERRUPT_FLAG
+ uint32_t regVal, ADC_Data;
+#endif
+
+ /* channel number is 0 through 7 */
+ if ( channelNum >= ADC_NUM )
+ {
+ channelNum = 0; /* reset channel number to 0 */
+ }
+ LPC_ADC->CR &= 0xFFFFFF00; // clear channel selection
+ LPC_ADC->CR |= (1 << 24) | (1 << channelNum);
+ /* switch channel,start A/D convert */
+#if !ADC_INTERRUPT_FLAG
+ while ( 1 ) /* wait until end of A/D convert */
+ {
+ regVal = *(volatile unsigned long *)(LPC_ADC_BASE
+ + ADC_OFFSET + ADC_INDEX * channelNum);
+ /* read result of A/D conversion */
+ if ( regVal & ADC_DONE )
+ {
+ break;
+ }
+ }
+
+ LPC_ADC->CR &= 0xF8FFFFFF; /* stop ADC now */
+ if ( regVal & ADC_OVERRUN ) /* save data when it's not overrun, otherwise, return zero */
+ {
+ return ( 0 );
+ }
+ ADC_Data = ( regVal >> 6 ) & 0x3FF;
+ return ( ADC_Data ); /* return A/D conversion value */
+#else
+ return ( channelNum ); /* if it's interrupt driven, the ADC reading is
+ done inside the handler. so, return channel number */
+#endif
+}
+
+/*****************************************************************************
+** Function name: ADC0BurstRead
+**
+** Descriptions: Use burst mode to convert multiple channels once.
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void ADCBurstRead( void )
+{
+ if ( LPC_ADC->CR & (0x7<<24) )
+ {
+ LPC_ADC->CR &= ~(0x7<<24);
+ }
+ /* Test channel 5,6,7 using burst mode because they are not shared
+ with the JTAG pins. */
+ LPC_ADC->CR &= ~0xFF;
+ /* Read all channels, 0 through 7. */
+ LPC_ADC->CR |= (0xFF);
+ LPC_ADC->CR |= (0x1<<16); /* Set burst mode and start A/D convert */
+ return; /* the ADC reading is done inside the
+ handler, return 0. */
+}
+
+/*********************************************************************************
+** End Of File
+*********************************************************************************/
diff --git a/software/mpu.old/src/adc.h b/software/mpu.old/src/adc.h new file mode 100644 index 0000000..682b8eb --- /dev/null +++ b/software/mpu.old/src/adc.h @@ -0,0 +1,35 @@ +/*****************************************************************************
+ * adc.h: Header file for NXP LPC134x Family Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2008.07.19 ver 1.00 Preliminary version, first Release
+ *
+******************************************************************************/
+#ifndef __ADC_H
+#define __ADC_H
+
+#define ADC_INTERRUPT_FLAG 0 /* 1 is interrupt driven, 0 is polling */
+#define BURST_MODE 0 /* Burst mode works in interrupt driven mode only. */
+#define ADC_DEBUG 1
+
+#define ADC_OFFSET 0x10
+#define ADC_INDEX 4
+
+#define ADC_DONE 0x80000000
+#define ADC_OVERRUN 0x40000000
+#define ADC_ADINT 0x00010000
+
+#define ADC_NUM 8 /* for LPC13xx */
+#define ADC_CLK 4500000 /* set to 4.5Mhz */
+
+extern void ADC_IRQHandler( void );
+extern void ADCInit( uint32_t ADC_Clk );
+extern uint32_t ADCRead( uint8_t channelNum );
+extern void ADCBurstRead( void );
+#endif /* end __ADC_H */
+/*****************************************************************************
+** End Of File
+******************************************************************************/
diff --git a/software/mpu.old/src/boot.c b/software/mpu.old/src/boot.c new file mode 100644 index 0000000..825aac5 --- /dev/null +++ b/software/mpu.old/src/boot.c @@ -0,0 +1,78 @@ +/*
+ * boot.c
+ *
+ * Created on: 13.09.2011
+ * Author: Roland
+ */
+
+#include "Types.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+#define NUM_QUEUE_ITEMS_KERNEL ((unsigned long) 2)
+#define NUM_QUEUE_ITEMS_CAMERA ((unsigned long) 2)
+#define NUM_QUEUE_ITEMS_LIGHTSENS ((unsigned long) 2)
+
+Status_t kernel_Init_Kernel(QH_t xQueues);
+Status_t camera_Init_Camera(QH_t xQueues);
+Status_t lightsens_Init_LightSens(QH_t xQueues);
+
+void UARTInit(uint32_t baudrate);
+
+/*
+ * Globals */
+volatile QH_t qh;
+
+Status_t boot_Init_Kernel(QH_t xQueues)
+{
+ return kernel_Init_Kernel( xQueues );
+}
+Status_t boot_Init_Camera(QH_t xQueues)
+{
+ return camera_Init_Camera( xQueues );
+}
+Status_t boot_Init_LightSens(QH_t xQueues)
+{
+ return lightsens_Init_LightSens( xQueues );
+}
+
+Status_t boot_CreateQueues( xQueueHandle *phxQueue_Kernel,
+ xQueueHandle *phxQueue_Camera,
+ xQueueHandle *phxQueue_LightSens)
+{
+ *phxQueue_Kernel = xQueueCreate(NUM_QUEUE_ITEMS_KERNEL, sizeof(Message_t));
+ *phxQueue_Camera = xQueueCreate(NUM_QUEUE_ITEMS_CAMERA, sizeof(Message_t));
+ *phxQueue_LightSens = xQueueCreate(NUM_QUEUE_ITEMS_LIGHTSENS, sizeof(Message_t));
+
+ return STATUS_OK;
+
+}
+void boot_Main(void)
+{
+ /*
+ *
+ * */
+
+ xQueueHandle hxQueue_Kernel;
+ xQueueHandle hxQueue_Camera;
+ xQueueHandle hxQueue_LightSens;
+
+ Status_t Status;
+
+ Status = boot_CreateQueues(&hxQueue_Kernel, &hxQueue_Camera, &hxQueue_LightSens);
+
+ qh.hxq_Kernel = hxQueue_Kernel;
+ qh.hxq_Camera = hxQueue_Camera;
+ qh.hxq_LightSens = hxQueue_LightSens;
+
+ Status = boot_Init_Kernel(qh);
+ Status = boot_Init_Camera(qh);
+ Status = boot_Init_LightSens(qh);
+
+ UARTInit(115200);
+
+ /* Start the tasks. */
+ vTaskStartScheduler();
+}
+
diff --git a/software/mpu.old/src/camera.c b/software/mpu.old/src/camera.c new file mode 100644 index 0000000..8ec62d3 --- /dev/null +++ b/software/mpu.old/src/camera.c @@ -0,0 +1,62 @@ +/*
+ * camera.c
+ *
+ * Created on: 23.10.2011
+ * Author: Roland
+ */
+
+#include "Types.h"
+#include "FreeRTOS.h"
+#include "queue.h"
+
+#define TASK_PRIORITY_camera ( tskIDLE_PRIORITY + 2 )
+#define TASK_STACK_SIZE_camera ( ( unsigned short ) 64 )
+
+/* Globals */
+static Task_Param_t TaskParam_Camera;
+
+/*
+ * The camera is connected to the MPU vie I2C to control the camera,
+ * and has a 8 bit bus for data transmission ...
+ * */
+static void camera_Process_Task(void *Param)
+{
+ Message_t Msg;
+ portCHAR chMsgBufCam[10] = "Hello Kl!";
+
+ if(NULL == TaskParam_Camera.QueueHandles.hxq_Camera)
+ {
+ return;
+ }
+
+ while(1)
+ {
+ if( xQueueReceive( TaskParam_Camera.QueueHandles.hxq_Camera, &Msg, MS(5) ))
+ {
+ switch (Msg.Sender)
+ {
+ case Sender_Kernel:
+ {
+ Msg.Sender = Sender_Camera;
+ Msg.pData = chMsgBufCam;
+ xQueueSend(TaskParam_Camera.QueueHandles.hxq_Kernel, &Msg, MS(10));
+ }
+ default: {;} /* for the time being we ignore messages received from
+ someone other than the kernel. */
+ }
+ }
+ }
+}
+
+Status_t camera_Init_Camera(QH_t hxQueues)
+{
+ TaskParam_Camera.QueueHandles = hxQueues;
+
+ if(!xTaskCreate( camera_Process_Task, (signed char *) "Camera",
+ TASK_STACK_SIZE_camera, &TaskParam_Camera,
+ TASK_PRIORITY_camera, &(TaskParam_Camera.hxTask_Self)))
+ return STATUS_ERROR_INIT;
+
+ /*TODO: check for success and pass it over to caller. */
+ return STATUS_OK;
+}
diff --git a/software/mpu.old/src/cr_startup_lpc13.c b/software/mpu.old/src/cr_startup_lpc13.c new file mode 100644 index 0000000..48a9784 --- /dev/null +++ b/software/mpu.old/src/cr_startup_lpc13.c @@ -0,0 +1,367 @@ +//*****************************************************************************
+// +--+
+// | ++----+
+// +-++ |
+// | |
+// +-+--+ |
+// | +--+--+
+// +----+ Copyright (c) 2009-10 Code Red Technologies Ltd.
+//
+// Microcontroller Startup code for use with Red Suite
+//
+// Software License Agreement
+//
+// The software is owned by Code Red Technologies and/or its suppliers, and is
+// protected under applicable copyright laws. All rights are reserved. Any
+// use in violation of the foregoing restrictions may subject the user to criminal
+// sanctions under applicable laws, as well as to civil liability for the breach
+// of the terms and conditions of this license.
+//
+// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+// USE OF THIS SOFTWARE FOR COMMERCIAL DEVELOPMENT AND/OR EDUCATION IS SUBJECT
+// TO A CURRENT END USER LICENSE AGREEMENT (COMMERCIAL OR EDUCATIONAL) WITH
+// CODE RED TECHNOLOGIES LTD.
+//
+//*****************************************************************************
+#if defined (__cplusplus)
+#ifdef __REDLIB__
+#error Redlib does not support C++
+#else
+//*****************************************************************************
+//
+// The entry point for the C++ library startup
+//
+//*****************************************************************************
+extern "C" {
+ extern void __libc_init_array(void);
+}
+#endif
+#endif
+
+#define WEAK __attribute__ ((weak))
+#define ALIAS(f) __attribute__ ((weak, alias (#f)))
+
+// Code Red - if CMSIS is being used, then SystemInit() routine
+// will be called by startup code rather than in application's main()
+#if defined (__USE_CMSIS)
+#include "system_LPC13xx.h"
+#endif
+
+//*****************************************************************************
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+//*****************************************************************************
+//
+// Forward declaration of the default handlers. These are aliased.
+// When the application defines a handler (with the same name), this will
+// automatically take precedence over these weak definitions
+//
+//*****************************************************************************
+void ResetISR(void);
+WEAK void NMI_Handler(void);
+WEAK void HardFault_Handler(void);
+WEAK void MemManage_Handler(void);
+WEAK void BusFault_Handler(void);
+WEAK void UsageFault_Handler(void);
+WEAK void SVCall_Handler(void);
+WEAK void DebugMon_Handler(void);
+WEAK void PendSV_Handler(void);
+WEAK void SysTick_Handler(void);
+WEAK void IntDefaultHandler(void);
+//*****************************************************************************
+//
+// Forward declaration of the specific IRQ handlers. These are aliased
+// to the IntDefaultHandler, which is a 'forever' loop. When the application
+// defines a handler (with the same name), this will automatically take
+// precedence over these weak definitions
+//
+//*****************************************************************************
+
+void I2C_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER16_0_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER16_1_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER32_0_IRQHandler(void) ALIAS(IntDefaultHandler);
+void TIMER32_1_IRQHandler(void) ALIAS(IntDefaultHandler);
+void SSP_IRQHandler(void) ALIAS(IntDefaultHandler);
+void UART_IRQHandler(void) ALIAS(IntDefaultHandler);
+void USB_IRQHandler(void) ALIAS(IntDefaultHandler);
+void USB_FIQHandler(void) ALIAS(IntDefaultHandler);
+void ADC_IRQHandler(void) ALIAS(IntDefaultHandler);
+void WDT_IRQHandler(void) ALIAS(IntDefaultHandler);
+void BOD_IRQHandler(void) ALIAS(IntDefaultHandler);
+void FMC_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT3_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT2_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT1_IRQHandler(void) ALIAS(IntDefaultHandler);
+void PIOINT0_IRQHandler(void) ALIAS(IntDefaultHandler);
+void WAKEUP_IRQHandler(void) ALIAS(IntDefaultHandler);
+
+extern void xPortSysTickHandler(void);
+extern void xPortPendSVHandler(void);
+extern void vPortSVCHandler( void );
+
+//*****************************************************************************
+//
+// The entry point for the application.
+// __main() is the entry point for Redlib based applications
+// main() is the entry point for Newlib based applications
+//
+//*****************************************************************************
+#if defined (__REDLIB__)
+extern void __main(void);
+#endif
+extern int main(void);
+//*****************************************************************************
+//
+// External declaration for the pointer to the stack top from the Linker Script
+//
+//*****************************************************************************
+extern void _vStackTop(void);
+
+//*****************************************************************************
+#if defined (__cplusplus)
+} // extern "C"
+#endif
+//*****************************************************************************
+//
+// The vector table. Note that the proper constructs must be placed on this to
+// ensure that it ends up at physical address 0x0000.0000.
+//
+//*****************************************************************************
+extern void (* const g_pfnVectors[])(void);
+__attribute__ ((section(".isr_vector")))
+void (* const g_pfnVectors[])(void) = {
+ // Core Level - CM3
+ &_vStackTop, // The initial stack pointer
+ ResetISR, // The reset handler
+ NMI_Handler, // The NMI handler
+ HardFault_Handler, // The hard fault handler
+ MemManage_Handler, // The MPU fault handler
+ BusFault_Handler, // The bus fault handler
+ UsageFault_Handler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ vPortSVCHandler, // SVCall handler
+ DebugMon_Handler, // Debug monitor handler
+ 0, // Reserved
+ xPortPendSVHandler, // The PendSV handler
+ xPortSysTickHandler, // The SysTick handler
+
+
+ // Wakeup sources (40 ea.) for the I/O pins:
+ // PIO0 (0:11)
+ // PIO1 (0:11)
+ // PIO2 (0:11)
+ // PIO3 (0:3)
+ WAKEUP_IRQHandler, // PIO0_0 Wakeup
+ WAKEUP_IRQHandler, // PIO0_1 Wakeup
+ WAKEUP_IRQHandler, // PIO0_2 Wakeup
+ WAKEUP_IRQHandler, // PIO0_3 Wakeup
+ WAKEUP_IRQHandler, // PIO0_4 Wakeup
+ WAKEUP_IRQHandler, // PIO0_5 Wakeup
+ WAKEUP_IRQHandler, // PIO0_6 Wakeup
+ WAKEUP_IRQHandler, // PIO0_7 Wakeup
+ WAKEUP_IRQHandler, // PIO0_8 Wakeup
+ WAKEUP_IRQHandler, // PIO0_9 Wakeup
+ WAKEUP_IRQHandler, // PIO0_10 Wakeup
+ WAKEUP_IRQHandler, // PIO0_11 Wakeup
+
+ WAKEUP_IRQHandler, // PIO1_0 Wakeup
+ WAKEUP_IRQHandler, // PIO1_1 Wakeup
+ WAKEUP_IRQHandler, // PIO1_2 Wakeup
+ WAKEUP_IRQHandler, // PIO1_3 Wakeup
+ WAKEUP_IRQHandler, // PIO1_4 Wakeup
+ WAKEUP_IRQHandler, // PIO1_5 Wakeup
+ WAKEUP_IRQHandler, // PIO1_6 Wakeup
+ WAKEUP_IRQHandler, // PIO1_7 Wakeup
+ WAKEUP_IRQHandler, // PIO1_8 Wakeup
+ WAKEUP_IRQHandler, // PIO1_9 Wakeup
+ WAKEUP_IRQHandler, // PIO1_10 Wakeup
+ WAKEUP_IRQHandler, // PIO1_11 Wakeup
+
+ WAKEUP_IRQHandler, // PIO2_0 Wakeup
+ WAKEUP_IRQHandler, // PIO2_1 Wakeup
+ WAKEUP_IRQHandler, // PIO2_2 Wakeup
+ WAKEUP_IRQHandler, // PIO2_3 Wakeup
+ WAKEUP_IRQHandler, // PIO2_4 Wakeup
+ WAKEUP_IRQHandler, // PIO2_5 Wakeup
+ WAKEUP_IRQHandler, // PIO2_6 Wakeup
+ WAKEUP_IRQHandler, // PIO2_7 Wakeup
+ WAKEUP_IRQHandler, // PIO2_8 Wakeup
+ WAKEUP_IRQHandler, // PIO2_9 Wakeup
+ WAKEUP_IRQHandler, // PIO2_10 Wakeup
+ WAKEUP_IRQHandler, // PIO2_11 Wakeup
+
+ WAKEUP_IRQHandler, // PIO3_0 Wakeup
+ WAKEUP_IRQHandler, // PIO3_1 Wakeup
+ WAKEUP_IRQHandler, // PIO3_2 Wakeup
+ WAKEUP_IRQHandler, // PIO3_3 Wakeup
+
+ I2C_IRQHandler, // I2C0
+ TIMER16_0_IRQHandler, // CT16B0 (16-bit Timer 0)
+ TIMER16_1_IRQHandler, // CT16B1 (16-bit Timer 1)
+ TIMER32_0_IRQHandler, // CT32B0 (32-bit Timer 0)
+ TIMER32_1_IRQHandler, // CT32B1 (32-bit Timer 1)
+ SSP_IRQHandler, // SSP0
+ UART_IRQHandler, // UART0
+
+ USB_IRQHandler, // USB IRQ
+ USB_FIQHandler, // USB FIQ
+
+ ADC_IRQHandler, // ADC (A/D Converter)
+ WDT_IRQHandler, // WDT (Watchdog Timer)
+ BOD_IRQHandler, // BOD (Brownout Detect)
+ FMC_IRQHandler, // Flash (IP2111 Flash Memory Controller)
+ PIOINT3_IRQHandler, // PIO INT3
+ PIOINT2_IRQHandler, // PIO INT2
+ PIOINT1_IRQHandler, // PIO INT1
+ PIOINT0_IRQHandler, // PIO INT0
+
+ };
+
+//*****************************************************************************
+//
+// The following are constructs created by the linker, indicating where the
+// the "data" and "bss" segments reside in memory. The initializers for the
+// for the "data" segment resides immediately following the "text" segment.
+//
+//*****************************************************************************
+extern unsigned long _etext;
+extern unsigned long _data;
+extern unsigned long _edata;
+extern unsigned long _bss;
+extern unsigned long _ebss;
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor first starts execution
+// following a reset event. Only the absolutely necessary set is performed,
+// after which the application supplied entry() routine is called. Any fancy
+// actions (such as making decisions based on the reset cause register, and
+// resetting the bits in that register) are left solely in the hands of the
+// application.
+//
+//*****************************************************************************
+void
+ResetISR(void) {
+ unsigned long *pulSrc, *pulDest;
+
+ //
+ // Copy the data segment initializers from flash to SRAM.
+ //
+ pulSrc = &_etext;
+ for (pulDest = &_data; pulDest < &_edata;) {
+ *pulDest++ = *pulSrc++;
+ }
+
+ //
+ // Zero fill the bss segment. This is done with inline assembly since this
+ // will clear the value of pulDest if it is not kept in a register.
+ //
+ __asm(" ldr r0, =_bss\n"
+ " ldr r1, =_ebss\n"
+ " mov r2, #0\n"
+ " .thumb_func\n"
+ "zero_loop:\n"
+ " cmp r0, r1\n"
+ " it lt\n"
+ " strlt r2, [r0], #4\n"
+ " blt zero_loop");
+
+#ifdef __USE_CMSIS
+ SystemInit();
+#endif
+
+#if defined (__cplusplus)
+ //
+ // Call C++ library initialisation
+ //
+ __libc_init_array();
+#endif
+
+#if defined (__REDLIB__)
+ // Call the Redlib library, which in turn calls main()
+ __main() ;
+#else
+ main();
+#endif
+ //
+ // main() shouldn't return, but if it does, we'll just enter an infinite loop
+ //
+ while (1) {
+ ;
+ }
+}
+
+//*****************************************************************************
+//
+// This is the code that gets called when the processor receives a NMI. This
+// simply enters an infinite loop, preserving the system state for examination
+// by a debugger.
+//
+//*****************************************************************************
+void NMI_Handler(void) {
+ while (1) {
+ }
+}
+
+void HardFault_Handler(void) {
+ while (1) {
+ }
+}
+
+void MemManage_Handler(void) {
+ while (1) {
+ }
+}
+
+void BusFault_Handler(void) {
+ while (1) {
+ }
+}
+
+void UsageFault_Handler(void) {
+ while (1) {
+ }
+}
+
+void SVCall_Handler(void) {
+ while (1) {
+ }
+}
+
+void DebugMon_Handler(void) {
+ while (1) {
+ }
+}
+
+void PendSV_Handler(void) {
+ while (1) {
+ }
+}
+
+void SysTick_Handler(void) {
+ while (1) {
+ }
+}
+
+//*****************************************************************************
+//
+// Processor ends up here if an unexpected interrupt occurs or a handler
+// is not present in the application code.
+//
+//*****************************************************************************
+
+void IntDefaultHandler(void) {
+ //
+ // Go into an infinite loop.
+ //
+ while (1) {
+ }
+}
diff --git a/software/mpu.old/src/kernel.c b/software/mpu.old/src/kernel.c new file mode 100644 index 0000000..f5d04ea --- /dev/null +++ b/software/mpu.old/src/kernel.c @@ -0,0 +1,117 @@ +/*
+ * kernel.c
+ *
+ * Created on: 13.09.2011
+ * Author: Roland
+ */
+#include "Types.h"
+#include "FreeRTOS.h"
+#include "queue.h"
+#include "uart.h"
+
+#define kernel_TASK_PRIORITY ( tskIDLE_PRIORITY + 5 )
+#define kernel_TASK_STACK_SIZE ( ( unsigned short ) 64 )
+
+void UARTSend(uint8_t *BufferPtr, uint32_t Length);
+
+/* Globals */
+#define BUFSIZE 0x40 // fixme: ...is sdefined in hart.h
+static Task_Param_t kernel_Param;
+extern volatile uint32_t UARTCount;
+extern volatile uint8_t UARTBuffer[BUFSIZE];
+
+/*
+ * Wake up other tasks, send them messages telling what to do,
+ * wait for them to have processed the commands or not, maybe
+ * put them to sleep again, ...
+ * */
+static void kernel_Process_Task(void *Param)
+{
+ Message_t RcvMsg;
+ Message_t SndMsg;
+ portTickType tick;
+ portCHAR chBufCam[10] = "Seas Cam!";
+ portCHAR chBufLSen[10] = "Seas LSe!";
+ portCHAR l = 'l';
+
+ if(NULL == kernel_Param.QueueHandles.hxq_Kernel)
+ {
+ return;
+ }
+
+ tick = xTaskGetTickCount();
+ while(1)
+ {
+ vTaskDelayUntil(&tick, MS(3));
+
+ if( xQueueReceive( kernel_Param.QueueHandles.hxq_Kernel, &RcvMsg, MS(5)))
+ {
+ /*
+ * switch Msg.Sender and act accordingly.
+ */
+ switch (RcvMsg.Sender)
+ {
+ case Sender_Camera:
+ {
+ SndMsg.Sender = Sender_Kernel;
+ SndMsg.pData = chBufCam;
+ xQueueSend(kernel_Param.QueueHandles.hxq_Camera, &SndMsg, MS(10));
+ break;
+ }
+
+ case Sender_LightSens:
+ {
+ SndMsg.Sender = Sender_Kernel;
+ SndMsg.pData = chBufLSen;
+ for(l = 0; l < 8; l ++)
+ {
+ UARTBuffer[l*4 +0] = 48+(((uint8_t *)(RcvMsg.pData))[l])%1000 / 100;
+ UARTBuffer[l*4 +1] = 48+(((uint8_t *)(RcvMsg.pData))[l])%100 / 10;
+ UARTBuffer[l*4 +2] = 48+(((uint8_t *)(RcvMsg.pData))[l])%10;
+ UARTBuffer[l*4 +3] = ' ';
+ }
+ UARTCount = 34;
+ UARTBuffer[32] = '\r';
+ UARTBuffer[33] = '\n';
+ UARTSend( (uint8_t *)UARTBuffer, UARTCount );
+// UARTSend( (uint8_t *)(RcvMsg.pData), 10 );
+// xQueueSend(kernel_Param.QueueHandles.hxq_LightSens, &SndMsg, MS(10));
+ break;
+ }
+ case Sender_UART:
+ {
+ if (UARTBuffer[UARTCount-1] != 'i')
+ break;
+ if ( UARTCount != 0 )
+ {
+ LPC_UART->IER = IER_THRE | IER_RLS; /* Disable RBR */
+ UARTSend( (uint8_t *)UARTBuffer, UARTCount );
+ UARTCount = 0;
+ LPC_UART->IER = IER_THRE | IER_RLS | IER_RBR; /* Re-enable RBR */
+
+ l = 'r';
+ SndMsg.pData = &l;
+
+ xQueueSend(kernel_Param.QueueHandles.hxq_LightSens, &SndMsg, MS(10));
+ }
+ break;
+ }
+ default: {;}
+ }
+ }
+ }
+}
+
+Status_t kernel_Init_Kernel(QH_t hxQueues)
+{
+portBASE_TYPE xResult;
+
+ xResult = xTaskCreate( kernel_Process_Task, (signed char *) "Kernel",
+ kernel_TASK_STACK_SIZE, &kernel_Param,
+ kernel_TASK_PRIORITY, &(kernel_Param.hxTask_Self) );
+
+ kernel_Param.QueueHandles = hxQueues;
+
+ /*TODO: check for success and pass it over to caller. */
+ return STATUS_OK;
+}
diff --git a/software/mpu.old/src/lightsens.c b/software/mpu.old/src/lightsens.c new file mode 100644 index 0000000..ed280f0 --- /dev/null +++ b/software/mpu.old/src/lightsens.c @@ -0,0 +1,116 @@ +/*
+ * lightsens.c
+ *
+ * Created on: 23.10.2011
+ * Author: Roland
+ */
+
+#include "Types.h"
+#include "FreeRTOS.h"
+#include "queue.h"
+#include "adc.h"
+
+#define LED_PORT 0 // Port for led
+#define LED_BIT 7 // Bit on port for led
+
+#define TASK_PRIORITY_lightsens ( tskIDLE_PRIORITY + 2 )
+#define TASK_STACK_SIZE_lightsens ( ( unsigned short ) 64 )
+
+
+/* Debug Helper */
+Status_t lightsens_ValueToString()
+{
+}
+
+/* Globals */
+static Task_Param_t TaskParam_LightSens;
+
+/*
+ * Wake up other tasks, send them messages telling what to do,
+ * wait for them to have processed the commands or not, maybe
+ * put them to sleep again, ...
+ * */
+static void lightsens_Process_Task(void *Param)
+{
+ Message_t Msg;
+ portCHAR chBufLSe[10] = "Seas Knl!";
+
+ portCHAR led;
+
+ portCHAR i;
+// volatile uint32_t ADCValue[ADC_NUM];
+ uint32_t ADCValue[ADC_NUM];
+
+ // set led port to output
+ LPC_GPIO0->DIR |= 1<<LED_BIT;
+
+ if(NULL == TaskParam_LightSens.QueueHandles.hxq_LightSens)
+ {
+ return;
+ }
+
+ Msg.Sender = Sender_LightSens;
+ Msg.pData = chBufLSe;
+ xQueueSend(TaskParam_LightSens.QueueHandles.hxq_Kernel, &Msg, MS(10));
+
+ /* Initialize ADC */
+ ADCInit( ADC_CLK );
+ for ( i = 0; i < ADC_NUM; i++ )
+ {
+ ADCValue[i] = ADCRead( i ); /* Polling */
+ }
+
+ while(1)
+ {
+ if( xQueueReceive( TaskParam_LightSens.QueueHandles.hxq_LightSens, &Msg, MS(5)))
+ {
+ /*
+ * switch Msg.Sender
+ *
+ */
+ switch (Msg.Sender)
+ {
+ case Sender_Kernel:
+ {
+ if (((portCHAR*)(Msg.pData))[0] == 'l')
+ {
+ if(led)
+ led = 0;
+ else
+ led = 1<<LED_BIT;
+
+
+ // LPC_GPIO0->MASKED_ACCESS[(1<<LED_BIT)] = led;
+ }
+ if(((portCHAR*)(Msg.pData))[0] == 'r')
+ {
+ for ( i = 0; i < ADC_NUM; i++ )
+ {
+ ADCValue[i] = ADCRead( i ); /* Polling */
+ }
+ }
+
+ Msg.Sender = Sender_LightSens;
+ Msg.pData = chBufLSe;
+ Msg.pData = ADCValue;
+ xQueueSend(TaskParam_LightSens.QueueHandles.hxq_Kernel, &Msg, MS(10));
+ }
+ default: {;} /* for the time being we ignore messages received from
+ someone other than the kernel. */
+ }
+ }
+ }
+}
+
+Status_t lightsens_Init_LightSens(QH_t hxQueues)
+{
+ TaskParam_LightSens.QueueHandles = hxQueues;
+
+ if(!xTaskCreate( lightsens_Process_Task, (signed char *) "LightSensor",
+ TASK_STACK_SIZE_lightsens, &TaskParam_LightSens,
+ TASK_PRIORITY_lightsens, &(TaskParam_LightSens.hxTask_Self)))
+ return STATUS_ERROR_INIT;
+
+ /*TODO: check for success and pass it over to caller. */
+ return STATUS_OK;
+}
diff --git a/software/mpu.old/src/main.c b/software/mpu.old/src/main.c new file mode 100644 index 0000000..e7f69f1 --- /dev/null +++ b/software/mpu.old/src/main.c @@ -0,0 +1,20 @@ +/*
+===============================================================================
+ Name : main.c
+ Author :
+ Version :
+ Copyright : Copyright (C)
+ Description : main definition
+===============================================================================
+*/
+void boot_Main(void);
+
+int main(void)
+{
+#if 1
+ boot_Main();
+#endif
+
+ /* If we ever reach this point, then there is something very wrong. */
+ return -1;
+}
diff --git a/software/mpu.old/src/ssp.c b/software/mpu.old/src/ssp.c new file mode 100644 index 0000000..0ad3009 --- /dev/null +++ b/software/mpu.old/src/ssp.c @@ -0,0 +1,263 @@ +/*****************************************************************************
+ * ssp.c: SSP C file for NXP LPC13xx Family Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2008.07.20 ver 1.00 Preliminary version, first Release
+ *
+*****************************************************************************/
+#include "LPC13xx.h" /* LPC13xx Peripheral Registers */
+//#include "gpio.h"
+#include "ssp.h"
+
+/* statistics of all the interrupts */
+volatile uint32_t interruptRxStat = 0;
+volatile uint32_t interruptOverRunStat = 0;
+volatile uint32_t interruptRxTimeoutStat = 0;
+
+/*****************************************************************************
+** Function name: SSP_IRQHandler
+**
+** Descriptions: SSP port is used for SPI communication.
+** SSP interrupt handler
+** The algorithm is, if RXFIFO is at least half full,
+** start receive until it's empty; if TXFIFO is at least
+** half empty, start transmit until it's full.
+** This will maximize the use of both FIFOs and performance.
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void SSP_IRQHandler(void)
+{
+ uint32_t regValue;
+
+ regValue = LPC_SSP->MIS;
+ if ( regValue & SSPMIS_RORMIS ) /* Receive overrun interrupt */
+ {
+ interruptOverRunStat++;
+ LPC_SSP->ICR = SSPICR_RORIC; /* clear interrupt */
+ }
+ if ( regValue & SSPMIS_RTMIS ) /* Receive timeout interrupt */
+ {
+ interruptRxTimeoutStat++;
+ LPC_SSP->ICR = SSPICR_RTIC; /* clear interrupt */
+ }
+
+ /* please be aware that, in main and ISR, CurrentRxIndex and CurrentTxIndex
+ are shared as global variables. It may create some race condition that main
+ and ISR manipulate these variables at the same time. SSPSR_BSY checking (polling)
+ in both main and ISR could prevent this kind of race condition */
+ if ( regValue & SSPMIS_RXMIS ) /* Rx at least half full */
+ {
+ interruptRxStat++; /* receive until it's empty */
+ }
+ return;
+
+ /*
+ * TODO: Send Message */
+}
+
+/*****************************************************************************
+** Function name: SSPInit
+**
+** Descriptions: SSP port initialization routine
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void SSPInit( void )
+{
+ uint8_t i, Dummy=Dummy;
+
+ LPC_SYSCON->PRESETCTRL |= (0x1<<0);
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<11);
+ LPC_SYSCON->SSPCLKDIV = 0x02; /* Divided by 2 */
+ LPC_IOCON->PIO0_8 &= ~0x07; /* SSP I/O config */
+ LPC_IOCON->PIO0_8 |= 0x01; /* SSP MISO */
+ LPC_IOCON->PIO0_9 &= ~0x07;
+ LPC_IOCON->PIO0_9 |= 0x01; /* SSP MOSI */
+#ifdef __JTAG_DISABLED
+ LPC_IOCON->SCKLOC = 0x00;
+ LPC_IOCON->JTAG_TCK_PIO0_10 &= ~0x07;
+ LPC_IOCON->JTAG_TCK_PIO0_10 |= 0x02; /* SSP CLK */
+#endif
+
+#if 1
+ /* On HummingBird 1(HB1), SSP CLK can be routed to different pins,
+ other than JTAG TCK, it's either P2.11 func. 1 or P0.6 func. 2. */
+ LPC_IOCON->SCKLOC = 0x01;
+ LPC_IOCON->PIO2_11 = 0x01;/* P2.11 function 1 is SSP clock, need to combined
+ with IOCONSCKLOC register setting */
+#else
+ LPC_IOCON->SCKLOC = 0x02;
+ LPC_IOCON->PIO0_6 = 0x02; /* P0.6 function 2 is SSP clock, need to combined
+ with IOCONSCKLOC register setting */
+#endif
+
+#if USE_CS
+ LPC_IOCON->PIO0_2 &= ~0x07;
+ LPC_IOCON->PIO0_2 |= 0x01; /* SSP SSEL */
+#else
+ LPC_IOCON->PIO0_2 &= ~0x07; /* SSP SSEL is a GPIO pin */
+ /* port0, bit 2 is set to GPIO output and high */
+ GPIOSetDir( PORT0, 2, 1 );
+ GPIOSetValue( PORT0, 2, 1 );
+#endif
+
+ /* Set DSS data to 8-bit, Frame format SPI, CPOL = 0, CPHA = 0, and SCR is 15 */
+ LPC_SSP->CR0 = 0x0707;
+
+ /* SSPCPSR clock prescale register, master mode, minimum divisor is 0x02 */
+ LPC_SSP->CPSR = 0x2;
+
+ for ( i = 0; i < FIFOSIZE; i++ )
+ {
+ Dummy = LPC_SSP->DR; /* clear the RxFIFO */
+ }
+
+ /* Enable the SSP Interrupt */
+ NVIC_EnableIRQ(SSP_IRQn);
+
+ /* Device select as master, SSP Enabled */
+#if LOOPBACK_MODE
+ LPC_SSP->CR1 = SSPCR1_LBM | SSPCR1_SSE;
+#else
+#if SSP_SLAVE
+ /* Slave mode */
+ if ( LPC_SSP->CR1 & SSPCR1_SSE )
+ {
+ /* The slave bit can't be set until SSE bit is zero. */
+ LPC_SSP->CR1 &= ~SSPCR1_SSE;
+ }
+ LPC_SSP->CR1 = SSPCR1_MS; /* Enable slave bit first */
+ LPC_SSP->CR1 |= SSPCR1_SSE; /* Enable SSP */
+#else
+ /* Master mode */
+ LPC_SSP->CR1 = SSPCR1_SSE;
+#endif
+#endif
+ /* Set SSPINMS registers to enable interrupts */
+ /* enable all error related interrupts */
+ LPC_SSP->IMSC = SSPIMSC_RORIM | SSPIMSC_RTIM;
+ return;
+}
+
+/*****************************************************************************
+** Function name: SSPSend
+**
+** Descriptions: Send a block of data to the SSP port, the
+** first parameter is the buffer pointer, the 2nd
+** parameter is the block length.
+**
+** parameters: buffer pointer, and the block length
+** Returned value: None
+**
+*****************************************************************************/
+void SSPSend( uint8_t *buf, uint32_t Length )
+{
+ uint32_t i;
+ uint8_t Dummy = Dummy;
+
+ for ( i = 0; i < Length; i++ )
+ {
+ /* Move on only if NOT busy and TX FIFO not full. */
+ while ( (LPC_SSP->SR & (SSPSR_TNF|SSPSR_BSY)) != SSPSR_TNF );
+ LPC_SSP->DR = *buf;
+ buf++;
+#if !LOOPBACK_MODE
+ while ( (LPC_SSP->SR & (SSPSR_BSY|SSPSR_RNE)) != SSPSR_RNE );
+ /* Whenever a byte is written, MISO FIFO counter increments, Clear FIFO
+ on MISO. Otherwise, when SSP0Receive() is called, previous data byte
+ is left in the FIFO. */
+ Dummy = LPC_SSP->DR;
+#else
+ /* Wait until the Busy bit is cleared. */
+ while ( LPC_SSP->SR & SSPSR_BSY );
+#endif
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: SSPReceive
+** Descriptions: the module will receive a block of data from
+** the SSP, the 2nd parameter is the block
+** length.
+** parameters: buffer pointer, and block length
+** Returned value: None
+**
+*****************************************************************************/
+void SSPReceive( uint8_t *buf, uint32_t Length )
+{
+ uint32_t i;
+
+ for ( i = 0; i < Length; i++ )
+ {
+ /* As long as Receive FIFO is not empty, I can always receive. */
+ /* If it's a loopback test, clock is shared for both TX and RX,
+ no need to write dummy byte to get clock to get the data */
+ /* if it's a peer-to-peer communication, SSPDR needs to be written
+ before a read can take place. */
+#if !LOOPBACK_MODE
+#if SSP_SLAVE
+ while ( !(LPC_SSP->SR & SSPSR_RNE) );
+#else
+ LPC_SSP->DR = 0xFF;
+ /* Wait until the Busy bit is cleared */
+ while ( (LPC_SSP->SR & (SSPSR_BSY|SSPSR_RNE)) != SSPSR_RNE );
+#endif
+#else
+ while ( !(LPC_SSP->SR & SSPSR_RNE) );
+#endif
+ *buf = LPC_SSP->DR;
+ buf++;
+
+ }
+ return;
+}
+/*****************************************************************************/
+void LoopbackTest( void )
+{
+ uint32_t i;
+
+#if !USE_CS
+ /* Set SSEL pin to output low. */
+ GPIOSetValue( PORT0, 2, 0 );
+#endif
+ i = 0;
+ while ( i <= SSP_BUFSIZE )
+ {
+ /* to check the RXIM and TXIM interrupt, I send a block data at one time
+ based on the FIFOSIZE(8). */
+ SSPSend( (uint8_t *)&src_addr[i], FIFOSIZE );
+ /* If RX interrupt is enabled, below receive routine can be
+ also handled inside the ISR. */
+ SSPReceive( (uint8_t *)&dest_addr[i], FIFOSIZE );
+ i += FIFOSIZE;
+ }
+#if !USE_CS
+ /* Set SSEL pin to output high. */
+ GPIOSetValue( PORT0, 2, 1 );
+#endif
+
+ /* verifying write and read data buffer. */
+ for ( i = 0; i < SSP_BUFSIZE; i++ )
+ {
+ if ( src_addr[i] != dest_addr[i] )
+ {
+ while( 1 ); /* Verification failed */
+ }
+ }
+ return;
+}
+
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
+
diff --git a/software/mpu.old/src/test_ssp.c b/software/mpu.old/src/test_ssp.c new file mode 100644 index 0000000..7097caa --- /dev/null +++ b/software/mpu.old/src/test_ssp.c @@ -0,0 +1,7 @@ +/*
+ * test_ssp.c
+ *
+ * Created on: 13.09.2011
+ * Author: Roland
+ */
+
diff --git a/software/mpu.old/src/uart.c b/software/mpu.old/src/uart.c new file mode 100644 index 0000000..6626dfc --- /dev/null +++ b/software/mpu.old/src/uart.c @@ -0,0 +1,198 @@ +/*****************************************************************************
+ * uart.c: UART API file for NXP LPC13xx Family Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2008.08.21 ver 1.00 Preliminary version, first Release
+ *
+******************************************************************************/
+#include "LPC13xx.h"
+#include "uart.h"
+
+#include "Types.h"
+#include "FreeRTOS.h"
+#include "queue.h"
+
+
+// CodeRed - change for CMSIS 1.3
+#define SystemFrequency SystemCoreClock
+
+extern volatile QH_t qh;
+
+volatile uint32_t UARTStatus;
+volatile uint8_t UARTTxEmpty = 1;
+volatile uint8_t UARTBuffer[BUFSIZE];
+volatile uint32_t UARTCount = 0;
+
+/*****************************************************************************
+** Function name: UART_IRQHandler
+**
+** Descriptions: UART interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void UART_IRQHandler(void)
+{
+ uint8_t IIRValue, LSRValue;
+ uint8_t Dummy = Dummy;
+ Message_t SndMsg;
+
+ IIRValue = LPC_UART->IIR;
+
+ IIRValue >>= 1; /* skip pending bit in IIR */
+ IIRValue &= 0x07; /* check bit 1~3, interrupt identification */
+ if (IIRValue == IIR_RLS) /* Receive Line Status */
+ {
+ LSRValue = LPC_UART->LSR;
+ /* Receive Line Status */
+ if (LSRValue & (LSR_OE | LSR_PE | LSR_FE | LSR_RXFE | LSR_BI))
+ {
+ /* There are errors or break interrupt */
+ /* Read LSR will clear the interrupt */
+ UARTStatus = LSRValue;
+ Dummy = LPC_UART->RBR; /* Dummy read on RX to clear
+ interrupt, then bail out */
+ return;
+ }
+ if (LSRValue & LSR_RDR) /* Receive Data Ready */
+ {
+ /* If no error on RLS, normal ready, save into the data buffer. */
+ /* Note: read RBR will clear the interrupt */
+ UARTBuffer[UARTCount++] = LPC_UART->RBR;
+ if (UARTCount == BUFSIZE)
+ {
+ UARTCount = 0; /* buffer overflow */
+ }
+ }
+ }
+ else if (IIRValue == IIR_RDA) /* Receive Data Available */
+ {
+ /* Receive Data Available */
+ UARTBuffer[UARTCount++] = LPC_UART->RBR;
+ if (UARTCount == BUFSIZE)
+ {
+ UARTCount = 0; /* buffer overflow */
+ }
+ }
+ else if (IIRValue == IIR_CTI) /* Character timeout indicator */
+ {
+ /* Character Time-out indicator */
+ UARTStatus |= 0x100; /* Bit 9 as the CTI error */
+ }
+ else if (IIRValue == IIR_THRE) /* THRE, transmit holding register empty */
+ {
+ /* THRE interrupt */
+ LSRValue = LPC_UART->LSR; /* Check status in the LSR to see if
+ valid data in U0THR or not */
+ if (LSRValue & LSR_THRE)
+ {
+ UARTTxEmpty = 1;
+ }
+ else
+ {
+ UARTTxEmpty = 0;
+ }
+ }
+ SndMsg.Sender = Sender_UART;
+ xQueueSendFromISR(qh.hxq_Kernel, &SndMsg, 0);
+
+ return;
+}
+
+/*****************************************************************************
+** Function name: UARTInit
+**
+** Descriptions: Initialize UART0 port, setup pin select,
+** clock, parity, stop bits, FIFO, etc.
+**
+** parameters: UART baudrate
+** Returned value: None
+**
+*****************************************************************************/
+void UARTInit(uint32_t baudrate)
+{
+ uint32_t Fdiv;
+ uint32_t regVal;
+
+ UARTTxEmpty = 1;
+ UARTCount = 0;
+
+ NVIC_DisableIRQ(UART_IRQn);
+
+ LPC_IOCON->PIO1_6 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_6 |= 0x01; /* UART RXD */
+ LPC_IOCON->PIO1_7 &= ~0x07;
+ LPC_IOCON->PIO1_7 |= 0x01; /* UART TXD */
+ /* Enable UART clock */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12);
+ LPC_SYSCON->UARTCLKDIV = 0x1; /* divided by 1 */
+
+ LPC_UART->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
+ regVal = LPC_SYSCON->UARTCLKDIV;
+ Fdiv = (((SystemFrequency/LPC_SYSCON->SYSAHBCLKDIV)/regVal)/16)/baudrate ; /*baud rate */
+
+ LPC_UART->DLM = Fdiv / 256;
+ LPC_UART->DLL = Fdiv % 256;
+ LPC_UART->LCR = 0x03; /* DLAB = 0 */
+ LPC_UART->FCR = 0x07; /* Enable and reset TX and RX FIFO. */
+
+ /* Read to clear the line status. */
+ regVal = LPC_UART->LSR;
+
+ /* Ensure a clean start, no data in either TX or RX FIFO. */
+// CodeRed - added parentheses around comparison in operand of &
+ while (( LPC_UART->LSR & (LSR_THRE|LSR_TEMT)) != (LSR_THRE|LSR_TEMT) );
+ while ( LPC_UART->LSR & LSR_RDR )
+ {
+ regVal = LPC_UART->RBR; /* Dump data from RX FIFO */
+ }
+
+ /* Enable the UART Interrupt */
+ NVIC_EnableIRQ(UART_IRQn);
+
+#if TX_INTERRUPT
+ LPC_UART->IER = IER_RBR | IER_THRE | IER_RLS; /* Enable UART interrupt */
+#else
+ LPC_UART->IER = IER_RBR | IER_RLS; /* Enable UART interrupt */
+#endif
+ return;
+}
+
+/*****************************************************************************
+** Function name: UARTSend
+**
+** Descriptions: Send a block of data to the UART 0 port based
+** on the data length
+**
+** parameters: buffer pointer, and data length
+** Returned value: None
+**
+*****************************************************************************/
+void UARTSend(uint8_t *BufferPtr, uint32_t Length)
+{
+
+ while ( Length != 0 )
+ {
+ /* THRE status, contain valid data */
+#if !TX_INTERRUPT
+ while ( !(LPC_UART->LSR & LSR_THRE) );
+ LPC_UART->THR = *BufferPtr;
+#else
+ /* Below flag is set inside the interrupt handler when THRE occurs. */
+ while ( !(UARTTxEmpty & 0x01) );
+ LPC_UART->THR = *BufferPtr;
+ UARTTxEmpty = 0; /* not empty in the THR until it shifts out */
+#endif
+ BufferPtr++;
+ Length--;
+ }
+ return;
+}
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
diff --git a/software/mpu.old/src/uart.h b/software/mpu.old/src/uart.h new file mode 100644 index 0000000..ee8f89b --- /dev/null +++ b/software/mpu.old/src/uart.h @@ -0,0 +1,55 @@ +/*****************************************************************************
+ * uart.h: Header file for NXP LPC13xx Family Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2008.08.21 ver 1.00 Preliminary version, first Release
+ *
+******************************************************************************/
+#ifndef __UART_H
+#define __UART_H
+
+
+#define RS485_ENABLED 0
+#define TX_INTERRUPT 0 /* 0 if TX uses polling, 1 interrupt driven. */
+#define MODEM_TEST 0
+
+#define IER_RBR 0x01
+#define IER_THRE 0x02
+#define IER_RLS 0x04
+
+#define IIR_PEND 0x01
+#define IIR_RLS 0x03
+#define IIR_RDA 0x02
+#define IIR_CTI 0x06
+#define IIR_THRE 0x01
+
+#define LSR_RDR 0x01
+#define LSR_OE 0x02
+#define LSR_PE 0x04
+#define LSR_FE 0x08
+#define LSR_BI 0x10
+#define LSR_THRE 0x20
+#define LSR_TEMT 0x40
+#define LSR_RXFE 0x80
+
+#define BUFSIZE 0x40
+
+/* RS485 mode definition. */
+#define RS485_NMMEN (0x1<<0)
+#define RS485_RXDIS (0x1<<1)
+#define RS485_AADEN (0x1<<2)
+#define RS485_SEL (0x1<<3)
+#define RS485_DCTRL (0x1<<4)
+#define RS485_OINV (0x1<<5)
+
+void UARTInit(uint32_t Baudrate);
+void UART_IRQHandler(void);
+void UARTSend(uint8_t *BufferPtr, uint32_t Length);
+
+#endif /* end __UART_H */
+/*****************************************************************************
+** End Of File
+******************************************************************************/
|