diff options
Diffstat (limited to 'software/hhd70dongle/c1101lib.c')
| -rw-r--r-- | software/hhd70dongle/c1101lib.c | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/software/hhd70dongle/c1101lib.c b/software/hhd70dongle/c1101lib.c index 2f0400e..ddbd28c 100644 --- a/software/hhd70dongle/c1101lib.c +++ b/software/hhd70dongle/c1101lib.c @@ -354,7 +354,7 @@ void c1101_init_ook_beacon(void) // Data format = Synchronous serial mode // Data rate = 1.00112 // RX filter BW = 58.035714 - // PA ramping = true + // PA ramping = false // Preamble count = 2 // Address config = No address check // Whitening = false @@ -368,7 +368,7 @@ void c1101_init_ook_beacon(void) // Base frequency = 435.199677 // Channel number = 0 // PA table - char const pa_table[8] = {0x00,0x12,0x0e,0x34,0x60,0xc5,0xc1,0xc0}; + char const pa_table[8] = {0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00}; //reset C1101 c1101_spi_strobe_command(SPIC1101_ADDR_SRES); @@ -384,10 +384,13 @@ void c1101_init_ook_beacon(void) //enable RX FIFO interrupt (i.e. GPO2 pulls high if >= FIFOTHR bytes are in RX FIFO) c1101_spi_write_register(SPIC1101_ADDR_IOCFG2, 0x41 ); //0x40, 0x42, 0x44, 0x47 // pull GPO high (interrupt) if more than 12 bytes in rx buffer (or less than 53 in tx) + //c1101_spi_write_register(SPIC1101_ADDR_FIFOTHR,0x47); //RX FIFO and TX FIFO Thresholds c1101_spi_write_register(SPIC1101_ADDR_FIFOTHR, 0); //assert at 4 bytes in RX Fifo and 61 in TX Fifo + //c1101_spi_write_register(SPIC1101_ADDR_PKTCTRL0,0x12);//Packet Automation Control c1101_spi_write_register(SPIC1101_ADDR_PKTCTRL0, 0b0000000001); //crc disabled; use FIFOs; variable packet length mode (first TX FIFO byte must be length) + c1101_spi_write_register(SPIC1101_ADDR_FSCTRL1,0x06); //Frequency Synthesizer Control c1101_spi_write_register(SPIC1101_ADDR_FREQ2,0x10); //Frequency Control Word, High Byte c1101_spi_write_register(SPIC1101_ADDR_FREQ1,0xBD); //Frequency Control Word, Middle Byte @@ -400,7 +403,7 @@ void c1101_init_ook_beacon(void) c1101_spi_write_register(SPIC1101_ADDR_MCSM0,0x18); //Main Radio Control State Machine Configuration c1101_spi_write_register(SPIC1101_ADDR_FOCCFG,0x16); //Frequency Offset Compensation Configuration c1101_spi_write_register(SPIC1101_ADDR_WORCTRL,0xFB); //Wake On Radio Control - c1101_spi_write_register(SPIC1101_ADDR_FREND0,0x17); //Front End TX Configuration + c1101_spi_write_register(SPIC1101_ADDR_FREND0,0x11); //Front End TX Configuration c1101_spi_write_register(SPIC1101_ADDR_FSCAL3,0xE9); //Frequency Synthesizer Calibration c1101_spi_write_register(SPIC1101_ADDR_FSCAL2,0x2A); //Frequency Synthesizer Calibration c1101_spi_write_register(SPIC1101_ADDR_FSCAL1,0x00); //Frequency Synthesizer Calibration |