diff options
| -rw-r--r-- | software/mpu/Makefile | 7 | ||||
| -rw-r--r-- | software/mpu/board/board.c | 4 | ||||
| -rw-r--r-- | software/mpu/board/board.h | 4 | ||||
| -rw-r--r-- | software/mpu/halconf.h | 2 | ||||
| -rw-r--r-- | software/mpu/main.c | 10 | ||||
| -rw-r--r-- | software/mpu/mcuconf.h | 2 | ||||
| -rw-r--r-- | software/mpu/usb-cdc-descriptor.h | 204 | ||||
| -rw-r--r-- | software/mpu/usb-cdc-shell.c | 308 | ||||
| -rw-r--r-- | software/mpu/usb-cdc-shell.h | 39 |
9 files changed, 565 insertions, 15 deletions
diff --git a/software/mpu/Makefile b/software/mpu/Makefile index 8dcb9ed..55f9a24 100644 --- a/software/mpu/Makefile +++ b/software/mpu/Makefile @@ -10,7 +10,7 @@ endif # C specific options here (added to USE_OPT). ifeq ($(USE_COPT),) - USE_COPT = + USE_COPT = endif # C++ specific options here (added to USE_OPT). @@ -77,9 +77,10 @@ CSRC = $(PORTSRC) \ $(HALSRC) \ $(PLATFORMSRC) \ $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/chprintf.c \ heartbeat.c \ + usb-cdc-shell.c \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global diff --git a/software/mpu/board/board.c b/software/mpu/board/board.c index c1a077e..2560a73 100644 --- a/software/mpu/board/board.c +++ b/software/mpu/board/board.c @@ -49,4 +49,8 @@ void __early_init(void) { * Board-specific initialization code. */ void boardInit(void) { + /* + * Disable JTAG-DP and SW-DP. + */ + AFIO->MAPR = AFIO_MAPR_SWJ_CFG_DISABLE; } diff --git a/software/mpu/board/board.h b/software/mpu/board/board.h index 018a45e..3004909 100644 --- a/software/mpu/board/board.h +++ b/software/mpu/board/board.h @@ -73,14 +73,12 @@ /* * Port A setup. * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). * PA8 - Push Pull output (LED). * PA11 - Normal input (USB DM). * PA12 - Normal input (USB DP). * PA13 - Push Pull output (USB DISC). */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ +#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ #define VAL_GPIOACRH 0x88344883 /* PA15...PA8 */ #define VAL_GPIOAODR 0xFFFFFFFF diff --git a/software/mpu/halconf.h b/software/mpu/halconf.h index f41266a..72b4e93 100644 --- a/software/mpu/halconf.h +++ b/software/mpu/halconf.h @@ -125,7 +125,7 @@ * @brief Enables the SERIAL subsystem. */ #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE +#define HAL_USE_SERIAL FALSE #endif /** diff --git a/software/mpu/main.c b/software/mpu/main.c index 8f411d5..bf85609 100644 --- a/software/mpu/main.c +++ b/software/mpu/main.c @@ -34,6 +34,7 @@ #include "hal.h" #include "heartbeat.h" +#include "usb-cdc-shell.h" /* * Application entry point. @@ -50,14 +51,9 @@ int main(void) { halInit(); chSysInit(); - heartbeatInit(); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop. - */ + usbCDCShellInit(); while (TRUE) { - chThdSleepMilliseconds(10000); + usbCDCShellRun(); } } diff --git a/software/mpu/mcuconf.h b/software/mpu/mcuconf.h index 6a03346..af13f57 100644 --- a/software/mpu/mcuconf.h +++ b/software/mpu/mcuconf.h @@ -151,7 +151,7 @@ * SERIAL driver system settings. */ #define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE diff --git a/software/mpu/usb-cdc-descriptor.h b/software/mpu/usb-cdc-descriptor.h new file mode 100644 index 0000000..41fc5a9 --- /dev/null +++ b/software/mpu/usb-cdc-descriptor.h @@ -0,0 +1,204 @@ +/* + * + * mur.sat + * + * Somewhen in the year 2012, mur.at will have a nano satellite launched + * into a low earth orbit (310 km above the surface of our planet). The + * satellite itself is a TubeSat personal satellite kit, developed and + * launched by interorbital systems. mur.sat is a joint venture of mur.at, + * ESC im Labor and realraum. + * + * Please visit the project hompage at sat.mur.at for further information. + * + * + * Copyright (C) 2013 Christian Pointner <equinox@mur.at> + * + * This file is part of mur.sat. + * + * mur.sat is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * any later version. + * + * mur.sat is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with mur.sat. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef MURSAT_usb_cdc_descriptor_h_INCLUDED +#define MURSAT_usb_cdc_descriptor_h_INCLUDED + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(14), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'm', 0, 'u', 0, 'r', 0, '.', 0, 'a', 0, 't', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(24), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'm', 0, 'u', 0, 'r', 0, '.', 0, 's', 0, 'a', 0, 't', 0, ' ', 0, + 'M', 0, 'P', 0, 'U', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0', 0, + '1', 0, + '0', 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + + +#endif diff --git a/software/mpu/usb-cdc-shell.c b/software/mpu/usb-cdc-shell.c new file mode 100644 index 0000000..b863b58 --- /dev/null +++ b/software/mpu/usb-cdc-shell.c @@ -0,0 +1,308 @@ +/* + * + * mur.sat + * + * Somewhen in the year 2012, mur.at will have a nano satellite launched + * into a low earth orbit (310 km above the surface of our planet). The + * satellite itself is a TubeSat personal satellite kit, developed and + * launched by interorbital systems. mur.sat is a joint venture of mur.at, + * ESC im Labor and realraum. + * + * Please visit the project hompage at sat.mur.at for further information. + * + * + * Copyright (C) 2013 Christian Pointner <equinox@mur.at> + * + * This file is part of mur.sat. + * + * mur.sat is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * any later version. + * + * mur.sat is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with mur.sat. If not, see <http://www.gnu.org/licenses/>. + * + */ + +// this heavily leans on the USB-CDC testhal Demo from chibiOS +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + + +#include <stdio.h> +#include <string.h> + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "shell.h" +#include "chprintf.h" + +#include "usb-cdc-shell.h" +#include "usb-cdc-descriptor.h" + + +static SerialUSBDriver SDU1; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +static USBInEndpointState ep1instate; +static USBOutEndpointState ep1outstate; +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 1, + NULL +}; + +static USBInEndpointState ep2instate; +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromIsr(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromIsr(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WA_SIZE(2048) +#define TEST_WA_SIZE THD_WA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {THD_STATE_NAMES}; + Thread *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state time\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state], (uint32_t)tp->p_time); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + Thread *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { + chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Public Interface. */ +/*===========================================================================*/ + +void usbCDCShellInit(void) +{ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + palSetPad(USB_DISC__PORT, USB_DISC__PIN); + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + palClearPad(USB_DISC__PORT, USB_DISC__PIN); + + shellInit(); +} + + +void usbCDCShellRun(void) +{ + Thread *shelltp = NULL; + + while (TRUE) { + if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminated(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/software/mpu/usb-cdc-shell.h b/software/mpu/usb-cdc-shell.h new file mode 100644 index 0000000..f44df9d --- /dev/null +++ b/software/mpu/usb-cdc-shell.h @@ -0,0 +1,39 @@ +/* + * + * mur.sat + * + * Somewhen in the year 2012, mur.at will have a nano satellite launched + * into a low earth orbit (310 km above the surface of our planet). The + * satellite itself is a TubeSat personal satellite kit, developed and + * launched by interorbital systems. mur.sat is a joint venture of mur.at, + * ESC im Labor and realraum. + * + * Please visit the project hompage at sat.mur.at for further information. + * + * + * Copyright (C) 2013 Christian Pointner <equinox@mur.at> + * + * This file is part of mur.sat. + * + * mur.sat is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * any later version. + * + * mur.sat is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with mur.sat. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef MURSAT_usb_cdc_shell_h_INCLUDED +#define MURSAT_usb_cdc_shell_h_INCLUDED + +void usbCDCShellInit(void); +void usbCDCShellRun(void); + +#endif |