/* Name: usbconfig.h
 * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
 * Author: Christian Starkjohann
 * Creation Date: 2005-04-01
 * Tabsize: 4
 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 */

#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__


/* ---------------------------- Hardware Config ---------------------------- */
#define USB_CFG_IOPORTNAME      B
#define USB_CFG_DMINUS_BIT      3
#define USB_CFG_DPLUS_BIT       4

#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
#if USB_CFG_CLOCK_KHZ==18000
#define USB_CFG_CHECK_CRC       1
#else
#define USB_CFG_CHECK_CRC       0
#endif

/* ----------------------- Optional Hardware Config ------------------------ */

/* #define USB_CFG_PULLUP_IOPORTNAME   B */
/* #define USB_CFG_PULLUP_BIT          3 */

/* --------------------------- Functional Range ---------------------------- */

#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
#define USB_CFG_EP3_NUMBER              3
/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
#define USB_CFG_IMPLEMENT_HALT          0
#define USB_CFG_SUPPRESS_INTR_CODE      0
#define USB_CFG_INTR_POLL_INTERVAL      255
#define USB_CFG_IS_SELF_POWERED         0
#define USB_CFG_MAX_BUS_POWER           100
#define USB_CFG_IMPLEMENT_FN_WRITE      1
#define USB_CFG_IMPLEMENT_FN_READ       1
#define USB_CFG_IMPLEMENT_FN_WRITEOUT   1
#define USB_CFG_HAVE_FLOWCONTROL        1
#define USB_CFG_DRIVER_FLASH_PAGE       0
#define USB_CFG_LONG_TRANSFERS          0
/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
#define USB_COUNT_SOF                   0
/* #ifdef __ASSEMBLER__
 * macro myAssemblerMacro
 *     in      YL, TCNT0
 *     sts     timer0Snapshot, YL
 *     endm
 * #endif
 * #define USB_SOF_HOOK                    myAssemblerMacro
 */
#define USB_CFG_CHECK_DATA_TOGGLING     0
#if USB_CFG_CLOCK_KHZ==16500 || USB_CFG_CLOCK_KHZ==12800
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   1
#include "osccal.h"
#else
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
#endif
#define USB_USE_FAST_CRC                0

/* -------------------------- Device Description --------------------------- */

#define USB_CFG_VENDOR_ID       0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
#define USB_CFG_DEVICE_ID       0xe1, 0x05 /* = 0x05e1 = 1505 */
#define USB_CFG_DEVICE_VERSION  0x00, 0x01
#define USB_CFG_VENDOR_NAME     'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
#define USB_CFG_VENDOR_NAME_LEN 8
#define USB_CFG_DEVICE_NAME     'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
#define USB_CFG_DEVICE_NAME_LEN 8
/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
#define USB_CFG_DEVICE_CLASS        2    /* set to 0 if deferred to interface */
#define USB_CFG_DEVICE_SUBCLASS     0
#define USB_CFG_INTERFACE_CLASS     2       /* CDC class */
#define USB_CFG_INTERFACE_SUBCLASS  2       /* Abstract (Modem) */
#define USB_CFG_INTERFACE_PROTOCOL  1       /* AT-Commands */
/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    42 */
/* #define USB_PUBLIC static */

/* ------------------- Fine Control over USB Descriptors ------------------- */

#define USB_CFG_DESCR_PROPS_DEVICE                  0
#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_STRINGS                 0
#define USB_CFG_DESCR_PROPS_STRING_0                0
#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
#define USB_CFG_DESCR_PROPS_HID                     0
#define USB_CFG_DESCR_PROPS_HID_REPORT              0
#define USB_CFG_DESCR_PROPS_UNKNOWN                 0


#define usbMsgPtr_t unsigned short

/* ----------------------- Optional MCU Description ------------------------ */

/* #define USB_INTR_CFG            MCUCR */
/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
/* #define USB_INTR_CFG_CLR        0 */
/* #define USB_INTR_ENABLE         GIMSK */
/* #define USB_INTR_ENABLE_BIT     INT0 */
/* #define USB_INTR_PENDING        GIFR */
/* #define USB_INTR_PENDING_BIT    INTF0 */
/* #define USB_INTR_VECTOR         INT0_vect */

#endif /* __usbconfig_h_included__ */