summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--lib/bmp280.c185
-rw-r--r--lib/bmp280.h107
-rw-r--r--usb-bmp280/Makefile51
-rw-r--r--usb-bmp280/usb-bmp280.c120
4 files changed, 463 insertions, 0 deletions
diff --git a/lib/bmp280.c b/lib/bmp280.c
new file mode 100644
index 0000000..89cf4cf
--- /dev/null
+++ b/lib/bmp280.c
@@ -0,0 +1,185 @@
+/*
+ * spreadspace avr utils
+ *
+ *
+ * Copyright (C) 2016 Bernhard Tittelbach <bernhard@tittelbach.org>
+ * appreciative nod to Adafruit for writing a great example, go buy their stuff
+ *
+ * This file is part of spreadspace avr utils.
+ *
+ * spreadspace avr utils is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * any later version.
+ *
+ * spreadspace avr utils is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdio.h>
+#include <avr/pgmspace.h>
+#include <LUFA/Drivers/Peripheral/SPI.h>
+#include "bmp280.h"
+
+
+int32_t bmp280_t_fine = 0;
+
+void bmp280_cs(bmp280_sensor *sensor, uint8_t select)
+{
+ if (!select)
+ *(sensor->cs_port) |= _BV(sensor->cs_pin);
+ else
+ *(sensor->cs_port) &= ~ _BV(sensor->cs_pin);
+}
+
+void bmp280_write8(uint8_t reg, uint8_t value)
+{
+ SPI_SendByte(reg & ~0x80); //bit 7 needs to be low for write mode
+ SPI_SendByte(value);
+}
+
+uint8_t bmp280_read8(uint8_t reg)
+{
+ SPI_SendByte(reg | 0x80); //bit 7 high for read mode
+ return SPI_ReceiveByte();
+}
+
+uint16_t bmp280_read16(uint8_t reg)
+{
+ uint16_t value = 0;
+ SPI_SendByte(reg | 0x80); //bit 7 high for read mode
+ value |= ((uint16_t) SPI_ReceiveByte() & 0xFF) << 8;
+ value |= (uint16_t) SPI_ReceiveByte() & 0xFF;
+ return value;
+}
+
+uint32_t bmp280_read24(uint8_t reg)
+{
+ uint32_t value = 0;
+ SPI_SendByte(reg | 0x80); //bit 7 high for read mode
+ value |= ((uint32_t) SPI_ReceiveByte() & 0xFF) << 16;
+ value |= ((uint32_t) SPI_ReceiveByte() & 0xFF) << 8;
+ value |= (uint32_t) SPI_ReceiveByte() & 0xFF;
+ return value;
+}
+
+int16_t bmp280_readS16(uint8_t reg)
+{
+ return (int16_t) bmp280_read16(reg);
+}
+
+uint16_t bmp280_read16_LE(uint8_t reg)
+{
+ uint16_t value = 0;
+ SPI_SendByte(reg | 0x80); //bit 7 high for read mode
+ value |= (uint16_t) SPI_ReceiveByte() & 0xFF;
+ value |= ((uint16_t) SPI_ReceiveByte() & 0xFF) << 8;
+ return value;
+}
+
+int16_t bmp280_readS16_LE(uint8_t reg)
+{
+ return (int16_t)bmp280_read16_LE(reg);
+}
+
+void bmp280_readCoefficients(bmp280_sensor *sensor)
+{
+ bmp280_cs(sensor, true);
+ sensor->dig_T1 = bmp280_read16_LE(BMP280_REGISTER_DIG_T1);
+ sensor->dig_T2 = bmp280_readS16_LE(BMP280_REGISTER_DIG_T2);
+ sensor->dig_T3 = bmp280_readS16_LE(BMP280_REGISTER_DIG_T3);
+ sensor->dig_P1 = bmp280_read16_LE(BMP280_REGISTER_DIG_P1);
+ sensor->dig_P2 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P2);
+ sensor->dig_P3 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P3);
+ sensor->dig_P4 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P4);
+ sensor->dig_P5 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P5);
+ sensor->dig_P6 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P6);
+ sensor->dig_P7 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P7);
+ sensor->dig_P8 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P8);
+ sensor->dig_P9 = bmp280_readS16_LE(BMP280_REGISTER_DIG_P9);
+ bmp280_cs(sensor, false);
+}
+
+//need to init SPI beforehand
+void bmp280_init(bmp280_sensor *sensor, volatile uint8_t *cs_port, uint8_t cs_pin)
+{
+ memset(sensor,0,sizeof(bmp280_sensor));
+ sensor->cs_port = cs_port;
+ sensor->cs_pin = cs_pin;
+ bmp280_readCoefficients(sensor);
+}
+
+float bmp280_readTemp(bmp280_sensor *sensor)
+{
+ int32_t var1, var2;
+
+ bmp280_cs(sensor, true);
+ int32_t adc_T = bmp280_read24(BMP280_REGISTER_TEMPDATA);
+ bmp280_cs(sensor, false);
+ adc_T >>= 4;
+
+ var1 = ((((adc_T>>3) - ((int32_t)sensor->dig_T1 <<1))) *
+ ((int32_t)sensor->dig_T2)) >> 11;
+
+ var2 = (((((adc_T>>4) - ((int32_t)sensor->dig_T1)) *
+ ((adc_T>>4) - ((int32_t)sensor->dig_T1))) >> 12) *
+ ((int32_t)sensor->dig_T3)) >> 14;
+
+ bmp280_t_fine = var1 + var2;
+
+ float T = (bmp280_t_fine * 5 + 128) >> 8;
+ return T/100;
+}
+
+float bmp280_readPressure(bmp280_sensor *sensor)
+{
+ int64_t var1, var2, p;
+
+ // Must be done first to get the bmp280_t_fine variable
+ bmp280_readTemp(sensor);
+
+ bmp280_cs(sensor, true);
+ int32_t adc_P = bmp280_read24(BMP280_REGISTER_PRESSUREDATA);
+ bmp280_cs(sensor, false);
+ adc_P >>= 4;
+
+ var1 = ((int64_t)bmp280_t_fine) - 128000;
+ var2 = var1 * var1 * (int64_t)sensor->dig_P6;
+ var2 = var2 + ((var1*(int64_t)sensor->dig_P5)<<17);
+ var2 = var2 + (((int64_t)sensor->dig_P4)<<35);
+ var1 = ((var1 * var1 * (int64_t)sensor->dig_P3)>>8) +
+ ((var1 * (int64_t)sensor->dig_P2)<<12);
+ var1 = (((((int64_t)1)<<47)+var1))*((int64_t)sensor->dig_P1)>>33;
+
+ if (var1 == 0)
+ {
+ return 0; // avoid exception caused by division by zero
+ }
+ p = 1048576 - adc_P;
+ p = (((p<<31) - var2)*3125) / var1;
+ var1 = (((int64_t)sensor->dig_P9) * (p>>13) * (p>>13)) >> 25;
+ var2 = (((int64_t)sensor->dig_P8) * p) >> 19;
+
+ p = ((p + var1 + var2) >> 8) + (((int64_t)sensor->dig_P7)<<4);
+ return (float)p/256;
+}
+
+/*float bmp280_readAltitude(bmp280_sensor *sensor, float sealevelp)
+{
+ float altitude;
+
+ float pressure = bmp280_readPressure(sensor); // in Si units for Pascal
+ pressure /= 100;
+
+ altitude = 44330 * (1.0 - pow(pressure / seaLevelhPa, 0.1903));
+
+ return altitude;
+}*/
+
+
+/// Helper Functions
diff --git a/lib/bmp280.h b/lib/bmp280.h
new file mode 100644
index 0000000..22472e3
--- /dev/null
+++ b/lib/bmp280.h
@@ -0,0 +1,107 @@
+/*
+ * spreadspace avr utils
+ *
+ *
+ * Copyright (C) 2016 Bernhard Tittelbach <bernhard@tittelbach.org>
+ * appreciative nod to Adafruit for writing a great example, go buy their stuff
+ *
+ * This file is part of spreadspace avr utils.
+ *
+ * spreadspace avr utils is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * any later version.
+ *
+ * spreadspace avr utils is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SPREADAVR_bmp280_h_INCLUDED
+#define SPREADAVR_bmp280_h_INCLUDED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define BMP280_AVERAGE_SEA_LEVEL_PRESSURE 1013.25
+#define BMP280_LUFA_SPIO_OPTIONS SPI_SPEED_FCPU_DIV_16 | SPI_MODE_MASTER | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING
+
+/*=========================================================================
+ REGISTERS
+ -----------------------------------------------------------------------*/
+ enum
+ {
+ BMP280_REGISTER_DIG_T1 = 0x88,
+ BMP280_REGISTER_DIG_T2 = 0x8A,
+ BMP280_REGISTER_DIG_T3 = 0x8C,
+
+ BMP280_REGISTER_DIG_P1 = 0x8E,
+ BMP280_REGISTER_DIG_P2 = 0x90,
+ BMP280_REGISTER_DIG_P3 = 0x92,
+ BMP280_REGISTER_DIG_P4 = 0x94,
+ BMP280_REGISTER_DIG_P5 = 0x96,
+ BMP280_REGISTER_DIG_P6 = 0x98,
+ BMP280_REGISTER_DIG_P7 = 0x9A,
+ BMP280_REGISTER_DIG_P8 = 0x9C,
+ BMP280_REGISTER_DIG_P9 = 0x9E,
+
+ BMP280_REGISTER_CHIPID = 0xD0,
+ BMP280_REGISTER_VERSION = 0xD1,
+ BMP280_REGISTER_SOFTRESET = 0xE0,
+
+ BMP280_REGISTER_CAL26 = 0xE1, // R calibration stored in 0xE1-0xF0
+
+ BMP280_REGISTER_CONTROL = 0xF4,
+ BMP280_REGISTER_CONFIG = 0xF5,
+ BMP280_REGISTER_PRESSUREDATA = 0xF7,
+ BMP280_REGISTER_TEMPDATA = 0xFA,
+ };
+
+/*=========================================================================*/
+
+
+/*=========================================================================
+ CALIBRATION DATA
+ -----------------------------------------------------------------------*/
+ typedef struct
+ {
+ volatile uint8_t *cs_port;
+ uint8_t cs_pin;
+ uint16_t dig_T1;
+ int16_t dig_T2;
+ int16_t dig_T3;
+
+ uint16_t dig_P1;
+ int16_t dig_P2;
+ int16_t dig_P3;
+ int16_t dig_P4;
+ int16_t dig_P5;
+ int16_t dig_P6;
+ int16_t dig_P7;
+ int16_t dig_P8;
+ int16_t dig_P9;
+
+ uint8_t dig_H1;
+ int16_t dig_H2;
+ uint8_t dig_H3;
+ int16_t dig_H4;
+ int16_t dig_H5;
+ int8_t dig_H6;
+ } bmp280_sensor;
+/*=========================================================================*/
+
+
+//make sure to configure the cs_pin as OUTPUT beforehand
+//make sure to configure SPI beforehand
+void bmp280_init(bmp280_sensor *sensor, volatile uint8_t *cs_port, uint8_t cs_pin);
+float bmp280_readTemp(bmp280_sensor *sensor);
+float bmp280_readPressure(bmp280_sensor *sensor);
+float bmp280_readAltitude(bmp280_sensor *sensor, float sealevelp);
+
+
+#endif \ No newline at end of file
diff --git a/usb-bmp280/Makefile b/usb-bmp280/Makefile
new file mode 100644
index 0000000..5bfc049
--- /dev/null
+++ b/usb-bmp280/Makefile
@@ -0,0 +1,51 @@
+##
+## spreadspace avr utils
+##
+##
+## Copyright (C) 2013-2016 Christian Pointner <equinox@spreadspace.org>
+## 2016 Bernhard Tittelbach <bernhard@tittelbach.org>
+##
+## This file is part of spreadspace avr utils.
+##
+## spreadspace avr utils is free software: you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation, either version 3 of the License, or
+## any later version.
+##
+## spreadspace avr utils is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.
+##
+
+NAME := usb-bmp280
+BOARD_TYPE := arduinoProMicro
+OBJ := $(NAME).o
+LIBS := util led lufa-descriptor-usbserial usbio bmp280
+EXTERNAL_LIBS := lufa
+SPREADAVR_PATH := ..
+
+LUFA_PATH := $(SPREADAVR_PATH)/contrib/lufa-LUFA-151115
+LUFA_OPTS = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D ORDERED_EP_CONFIG
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+
+LUFA_OPTS += -D USB_MANUFACTURER="L\"xro\""
+LUFA_OPTS += -D USB_PRODUCT="L\"spreadspace usb-bmp280 example\""
+
+LUFA_COMPONENTS := USB USBCLASS
+
+include $(SPREADAVR_PATH)/include.mk
+
+LDFLAGS += -Wl,-u,vfprintf -lprintf_flt -lm
+AVRDUDE_PORT := $(shell $(SPREADAVR_PATH)/tools/detect_newest_acm)
+#AVRDUDE_PORT := $(shell $(SPREADAVR_PATH)/tools/detect_lufa_cdc 1)
+RESET_FUNC := $(SPREADAVR_PATH)/tools/reset_sparkfun
diff --git a/usb-bmp280/usb-bmp280.c b/usb-bmp280/usb-bmp280.c
new file mode 100644
index 0000000..0c19545
--- /dev/null
+++ b/usb-bmp280/usb-bmp280.c
@@ -0,0 +1,120 @@
+/*
+ * spreadspace avr utils - usb-bmp180 example
+ *
+ *
+ * Copyright (C) 2016 Bernhard Tittelbach <bernhard@tittelbach.org>
+ * basically this is refactored and enhanced code from:
+ * https://github.com/sparkfun/BMP180_Breakout_Arduino_Library
+ * Please buy the sparkfun people Beer when you see them!!!!
+ *
+ * This file is part of spreadspace avr utils.
+ *
+ * spreadspace avr utils is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * any later version.
+ *
+ * spreadspace avr utils is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdio.h>
+
+#include <LUFA/Drivers/Peripheral/SPI.h>
+
+#include "util.h"
+#include "led.h"
+#include "usbio.h"
+#include "bmp280.h"
+
+#define ALTITUDE 353.0 // Altitude of Graz in Austria
+
+#define PIN_CS_S0 PD1
+#define REG_CS_S0 PIND
+#define PIN_CS_S1 PD0
+#define REG_CS_S1 PIND
+
+#define OP_SETBIT |=
+#define OP_CLEARBIT &= ~
+#define OP_CHECK &
+#define PIN_SW(PORTDDRREG, PIN, OP) PORTDDRREG OP (1 << PIN)
+
+#define PINREG(x) x
+#define DDRREG(x) *(&x+1)
+#define PORTREG(x) *(&x+2)
+
+#define HIGHv OP_SETBIT
+#define LOWv OP_CLEARBIT
+
+#define CS_SENSOR_0(LOWHIGH) (PIN_SW(PORTREG(REG_CS_S0),PIN_CS_S0,LOWHIGH))
+#define CS_SENSOR_1(LOWHIGH) (PIN_SW(PORTREG(REG_CS_S1),PIN_CS_S1,LOWHIGH))
+#define CS_SENSOR(x,LOWHIGH) CS_SENSOR_##x(LOWHIGH)
+
+void printCoeffs(bmp280_sensor *sensor)
+{
+ printf("Coeffients\r\n");
+ printf("T1: %d, T2: %d, T3: %d\r\n", sensor->dig_T1, sensor->dig_T2, sensor->dig_T3);
+ printf("P1: %d, P2: %d, P3: %d, P4: %d, P5: %d, P6: %d, P7: %d, P8: %d, P9: %d\r\n",sensor->dig_P1,sensor->dig_P2,sensor->dig_P3,sensor->dig_P4,sensor->dig_P5,sensor->dig_P6,sensor->dig_P7,sensor->dig_P8,sensor->dig_P9);
+ printf("H1: %d, H2: %d, H3: %d, H4: %d, H5: %d, H6: %d\r\n",sensor->dig_H1,sensor->dig_H2,sensor->dig_H3
+ ,sensor->dig_H4,sensor->dig_H5,sensor->dig_H6);
+}
+
+int main(void)
+{
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ cpu_init();
+ led_init();
+ usbio_init();
+ sei();
+
+ bmp280_sensor sensor0;
+ bmp280_sensor sensor1;
+
+ CS_SENSOR(0,HIGHv);
+ CS_SENSOR(1,HIGHv);
+ SPI_Init(BMP280_LUFA_SPIO_OPTIONS);
+ bmp280_init(&sensor0, &PORTREG(REG_CS_S0), PIN_CS_S0);
+ bmp280_init(&sensor1, &PORTREG(REG_CS_S1), PIN_CS_S1);
+
+ printf("BMP280 initialized");
+
+ for(;;) {
+
+ printf("\r\n== Sensor 0 ==\r\n");
+ printCoeffs(&sensor0);
+ float temp = bmp280_readTemp(&sensor0);
+ float pressure = bmp280_readPressure(&sensor0);
+ printf("\r\nPressure: %.2f Pa @ %.2f degC\r\n", pressure, temp);
+
+ printf("\r\n== Sensor 1 ==\r\n");
+ printCoeffs(&sensor1);
+ temp = bmp280_readTemp(&sensor1);
+ pressure = bmp280_readPressure(&sensor1);
+ printf("\r\nPressure: %.2f Pa @ %.2f degC\r\n", pressure, temp);
+
+ usbio_task();
+
+ int16_t BytesReceived = usbio_bytes_received();
+ while(BytesReceived > 0) {
+ int ReceivedByte = fgetc(stdin);
+ if(ReceivedByte != EOF) {
+ if (ReceivedByte == '!')
+ reset2bootloader();
+ }
+ BytesReceived--;
+ }
+
+ _delay_ms(2000); // Pause for 5 seconds.
+ }
+}