fastled now works on mimimus32

1 files changed, 0 insertions, 236 deletions

diff --git a/lib/arduino-standard/arduino_pins.h b/lib/arduino-standard/arduino_pins.h
deleted file mode 100644
index a3f349e..0000000
--- a/lib/arduino-standard/arduino_pins.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-#define NUM_DIGITAL_PINS            20
-#define NUM_ANALOG_INPUTS           6
-#define analogInputToDigitalPin(p)  ((p < 6) ? (p) + 14 : -1)
-
-#if defined(__AVR_ATmega8__)
-#define digitalPinHasPWM(p)         ((p) == 9 || (p) == 10 || (p) == 11)
-#else
-#define digitalPinHasPWM(p)         ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11)
-#endif
-
-static const uint8_t SS   = 10;
-static const uint8_t MOSI = 11;
-static const uint8_t MISO = 12;
-static const uint8_t SCK  = 13;
-
-static const uint8_t SDA = 18;
-static const uint8_t SCL = 19;
-#define LED_BUILTIN 13
-
-static const uint8_t A0 = 14;
-static const uint8_t A1 = 15;
-static const uint8_t A2 = 16;
-static const uint8_t A3 = 17;
-static const uint8_t A4 = 18;
-static const uint8_t A5 = 19;
-static const uint8_t A6 = 20;
-static const uint8_t A7 = 21;
-
-#define digitalPinToPCICR(p)    (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1))
-#define digitalPinToPCMSK(p)    (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0))))
-#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14)))
-
-#define digitalPinToInterrupt(p)  ((p) == 2 ? 0 : ((p) == 3 ? 1 : NOT_AN_INTERRUPT))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA8 & 168 / ARDUINO
-//
-//                  +-\/-+
-//            PC6  1|    |28  PC5 (AI 5)
-//      (D 0) PD0  2|    |27  PC4 (AI 4)
-//      (D 1) PD1  3|    |26  PC3 (AI 3)
-//      (D 2) PD2  4|    |25  PC2 (AI 2)
-// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1)
-//      (D 4) PD4  6|    |23  PC0 (AI 0)
-//            VCC  7|    |22  GND
-//            GND  8|    |21  AREF
-//            PB6  9|    |20  AVCC
-//            PB7 10|    |19  PB5 (D 13)
-// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
-// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
-//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
-//      (D 8) PB0 14|    |15  PB1 (D 9) PWM
-//                  +----+
-//
-// (PWM+ indicates the additional PWM pins on the ATmega168.)
-
-// ATMEL ATMEGA1280 / ARDUINO
-//
-// 0-7 PE0-PE7   works
-// 8-13 PB0-PB5  works
-// 14-21 PA0-PA7 works 
-// 22-29 PH0-PH7 works
-// 30-35 PG5-PG0 works
-// 36-43 PC7-PC0 works
-// 44-51 PJ7-PJ0 works
-// 52-59 PL7-PL0 works
-// 60-67 PD7-PD0 works
-// A0-A7 PF0-PF7
-// A8-A15 PK0-PK7
-
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	(uint16_t) &DDRB,
-	(uint16_t) &DDRC,
-	(uint16_t) &DDRD,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	(uint16_t) &PORTB,
-	(uint16_t) &PORTC,
-	(uint16_t) &PORTD,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	(uint16_t) &PINB,
-	(uint16_t) &PINC,
-	(uint16_t) &PIND,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-	PD, /* 0 */
-	PD,
-	PD,
-	PD,
-	PD,
-	PD,
-	PD,
-	PD,
-	PB, /* 8 */
-	PB,
-	PB,
-	PB,
-	PB,
-	PB,
-	PC, /* 14 */
-	PC,
-	PC,
-	PC,
-	PC,
-	PC,
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-	_BV(0), /* 0, port D */
-	_BV(1),
-	_BV(2),
-	_BV(3),
-	_BV(4),
-	_BV(5),
-	_BV(6),
-	_BV(7),
-	_BV(0), /* 8, port B */
-	_BV(1),
-	_BV(2),
-	_BV(3),
-	_BV(4),
-	_BV(5),
-	_BV(0), /* 14, port C */
-	_BV(1),
-	_BV(2),
-	_BV(3),
-	_BV(4),
-	_BV(5),
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-	NOT_ON_TIMER, /* 0 - port D */
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	// on the ATmega168, digital pin 3 has hardware pwm
-#if defined(__AVR_ATmega8__)
-	NOT_ON_TIMER,
-#else
-	TIMER2B,
-#endif
-	NOT_ON_TIMER,
-	// on the ATmega168, digital pins 5 and 6 have hardware pwm
-#if defined(__AVR_ATmega8__)
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-#else
-	TIMER0B,
-	TIMER0A,
-#endif
-	NOT_ON_TIMER,
-	NOT_ON_TIMER, /* 8 - port B */
-	TIMER1A,
-	TIMER1B,
-#if defined(__AVR_ATmega8__)
-	TIMER2,
-#else
-	TIMER2A,
-#endif
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER, /* 14 - port C */
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-};
-
-#endif
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR   Serial
-#define SERIAL_PORT_HARDWARE  Serial
-
-#endif