path: root/keyexchange/isakmpd-20041012/isakmpd.conf.5

.\" $OpenBSD: isakmpd.conf.5,v 1.94 2004/08/10 15:59:10 ho Exp $
.\" $EOM: isakmpd.conf.5,v 1.57 2000/12/21 14:43:17 ho Exp $
.\"
.\" Copyright (c) 1998, 1999, 2000 Niklas Hallqvist.  All rights reserved.
.\" Copyright (c) 2000, 2001, 2002 H�kan Olsson.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" This code was written under funding by Ericsson Radio Systems.
.\"
.\" Manual page, using -mandoc macros
.\"
.Dd August 07, 2002
.Dt ISAKMPD.CONF 5
.Os
.Sh NAME
.Nm isakmpd.conf
.Nd configuration file for isakmpd
.Sh DESCRIPTION
.Nm
is the configuration file for the
.Nm isakmpd
daemon managing security association and key management for the
IPsec layer of the kernel's networking stack.
.Pp
The file is of a well known type of format called .INI style, named after
the suffix used by an overrated windowing environment for its configuration
files.
This format consists of sections, each beginning with a line looking like:
.Bd -literal
[Section name]
.Ed
Between the brackets is the name of the section following this section header.
Inside a section many tag/value pairs can be stored, each one looking like:
.Bd -literal
Tag=Value
.Ed
If the value needs more space than fits on a single line it's possible to
continue it on the next by ending the first with a backslash character
immediately before the newline character.
This method can extend a value for an arbitrary number of lines.
.Pp
Comments can be put anywhere in the file by using a hash mark
.Pq Sq \&# .
The comment extends to the end of the current line.
.Pp
Often the right-hand side values consist of other section names.
This results in a tree structure.
Some values are treated as a list of several scalar values.
Such lists always use a comma character as the separator.
Some values are formatted like this: X,Y:Z, which
is an offer/accept syntax, where X is a value we offer and Y:Z is a range of
accepted values, inclusive.
.Pp
To activate changes to
.Nm
without restarting
.Nm isakmpd ,
send a
.Dv SIGHUP
signal to the daemon process.
.Ss Auto-generated parts of the configuration
.Pp
Some predefined section names are recognized by the daemon, avoiding the need
to fully specify the Main Mode transforms and Quick Mode suites, protocols,
and transforms.
.Pp
For Main Mode:
.Bd -filled -compact
.Ar {DES,BLF,3DES,CAST,AES}-{MD5,SHA}[-GRP{1,2,5,14}][-{DSS,RSA_SIG}]
.Ed
.Pp
For Quick Mode:
.Bd -filled -compact
.Ar QM-{proto}[-TRP]-{cipher}[-{hash}][-PFS[-{group}]]-SUITE
.Ed
.Bd -literal
  where
    {proto}  is either ESP or AH
    {cipher} is either DES, 3DES, CAST, BLF or AES
    {hash}   is either MD5, SHA, RIPEMD, SHA2-{256,384,512}
    {group}  is either GRP1, GRP2, GRP5 or GRP14
.Ed
.Pp
For example, 3DES-SHA means: 3DES encryption, SHA hash, and authorization by
pre-shared keys.
Similarly, QM-ESP-3DES-SHA-PFS-SUITE means: ESP protocol, 3DES encryption,
SHA hash, and use Perfect Forward Secrecy.
.Pp
Unless explicitly stated with -GRP1, 2, 5 or 14 transforms and PFS suites
use DH group 2.
There are currently no predefined ESP+AH Quick Mode suites.
.Pp
The predefinitions include some default values for the special
sections "General", "Keynote", "X509-certificates", and
"Default-phase-1-configuration".
These default values are presented in the example below.
.Pp
All autogenerated values can be overridden by manual entries by using the
same section and tag names in the configuration file.
In particular, the default phase 1 (Main or Aggressive Mode) and phase 2
(Quick Mode) lifetimes can be overridden by these tags under the "General"
section;
.Bd -literal
[General]
Default-phase-1-lifetime=	3600,60:86400
Default-phase-2-lifetime=	1200,60:86400
.Ed
.Pp
The Main Mode lifetime currently defaults to one hour (minimum 60
seconds, maximum 1 day).
The Quick Mode lifetime defaults to 20 minutes
(minimum 60 seconds, maximum 1 day).
.Pp
Also, the default phase 1 ID can be set by creating a <Phase1-ID>
section, as shown below, and adding this tag under the "General"
section;
.Bd -literal
[General]
Default-phase-1-ID=		Phase1-ID-name

[Phase1-ID-name]
ID-type=			USER_FQDN
Name=				foo@bar.com
.Ed
.Ss Roots
.Bl -hang -width 12n
.It Em General
Generic global configuration parameters
.Bl -tag -width 12n
.It Em Default-phase-1-ID
Optional default phase 1 ID name.
.It Em Default-phase-1-lifetime
The default lifetime for autogenerated transforms (phase 1).
If unspecified, the value 3600,60:86400 is used as the default.
.It Em Default-phase-2-lifetime
The default lifetime for autogenerated suites (phase 2).
If unspecified, the value 1200,60:86400 is used as the default.
.It Em Default-phase-2-suites
A list of phase 2 suites that will be used when establishing dynamic
SAs.
If left unspecified, QM-ESP-3DES-SHA-PFS-SUITE is used as the default.
.It Em Acquire-Only
If this tag is defined,
.Nm isakmpd
will not set up flows automatically.
This is useful when flows are configured with
.Xr ipsecadm 4
or by other programs like
.Xr bgpd 8 .
Thus
.Nm isakmpd
only takes care of the SA establishment.
.It Em Check-interval
The interval between watchdog checks of connections we want up at all
times.
.It Em DPD-check-interval
The interval between RFC 3706 (Dead Peer Detection) messages.
The default value is 0 (zero), which means DPD is disabled.
.It Em Exchange-max-time
How many seconds should an exchange maximally take to set up before we
give up.
.It Em Listen-on
A list of IP-addresses OK to listen on.
This list is used as a filter for the set of addresses the interfaces
configured provides.
This means that we won't see if an address given here does not exist
on this host, and thus no error is given for that case.
.It Em Loglevel
A list of the form
.Ar class Ns = Ns Ar level ,
where both
.Ar class
and
.Ar level
are numbers.
This is similar to the
.Fl D
command line switch of
.Em isakmpd .
See
.Xr isakmpd 8
for details.
.It Em Logverbose
If this tag is defined, whatever the value is, verbose logging is enabled.
This is similar to the
.Fl v
command line switch of
.Em isakmpd .
See
.Xr isakmpd 8
for details.
.It Em NAT-T-Keepalive
The number of seconds between NAT-T keepalive messages, sent by the
peer behind NAT to keep the mapping active.
Defaults to 20.
.It Em Policy-file
The name of the file that contains
.Xr keynote 4
policies.
The default is "/etc/isakmpd/isakmpd.policy".
.It Em Pubkey-directory
The directory in which
.Nm
looks for explicitly trusted public keys.
The default is "/etc/isakmpd/pubkeys".
Read
.Xr isakmpd 8
for the required naming convention of the files in here.
.It Em Renegotiate-on-HUP
If this tag is defined, whatever the value is,
.Nm isakmpd
will renegotiate all current phase 2 SAs when the daemon receives a
.Dv SIGHUP
signal, or an
.Sq R
is sent to the FIFO interface (see
.Xr isakmpd 8 ) .
.It Em Retransmits
How many times should a message be retransmitted before giving up.
.It Em Shared-SADB
If this tag is defined, whatever the value is, some semantics of
.Nm
are changed so that multiple instances can run on top of one SADB
and set up SAs with each other.
Specifically this means replay
protection will not be asked for, and errors that can occur when
updating an SA with its parameters a 2nd time will be ignored.
.It Em Use-Keynote
This tag controls the use of
.Xr keynote 4
policy checking.
The default value is
.Qq yes ,
which enables the policy checking.
When set to any other value, policies will not be checked.
This is useful when policies for flows and SA establishment are arranged by
other programs like
.Xr ipsecadm 8
or
.Xr bgpd 8 .
.El
.It Em Phase 1
ISAKMP SA negotiation parameter root
.Bl -tag -width 12n
.It Em <IP-address>
A name of the ISAKMP peer at the given IP-address.
.It Em Default
A name of the default ISAKMP peer.
Incoming phase 1 connections from other IP-addresses will use this peer name.
.It ""
This name is used as the section name for further information to be found.
Look at <ISAKMP-peer> below.
.El
.It Em Phase 2
IPsec SA negotiation parameter root
.Bl -tag -width 12n
.It Em Connections
A list of directed IPsec "connection" names that should be brought up
automatically, either on first use if the system supports it, or at
startup of the daemon.
These names are section names where further information can be found.
Look at <IPsec-connection> below.
Normally any connections mentioned here are treated as part of the
"Passive-connection" list we present below, however there is a
flag: "Active-only" that disables this behaviour.
This too is mentioned in the <IPsec-connection> section, in the "Flags" tag.
.It Em Passive-connections
A list of IPsec "connection" names we recognize and accept initiations for.
These names are section names where further information can be found.
Look at <IPsec-connection> below.
Currently only the Local-ID and Remote-ID tags
are looked at in those sections, as they are matched against the IDs given
by the initiator.
.El
.It Em KeyNote
.Bl -tag -width 12n
.It Em Credential-directory
A directory containing directories named after IDs (IP
addresses,
.Dq user@domain ,
or hostnames) that contain files named
.Dq credentials
and
.Dq private_key .
.Pp
The credentials file contains
.Xr keynote 4
credentials that are sent to a remote IKE daemon when we use the
associated ID, or credentials that we may want to consider when doing
an exchange with a remote IKE daemon that uses that ID.
Note that, in the former case, the last credential in the file
MUST contain our public key in its Licensees field.
More than one credentials may exist in the file.
They are separated by whitelines (the format is essentially the same as
that of the policy file).
The credentials are of the same format as the policies described in
.Xr isakmpd.policy 5 .
The only difference is that the Authorizer field contains a public
key, and the assertion is signed.
Signed assertions can be generated using the
.Xr keynote 1
utility.
.Pp
The private_key file contains the private RSA key we use for
authentication.
If the directory (and the files) exist, they take precedence over X509-based
authentication.
.El
.It Em X509-Certificates
.Bl -tag -width 12n
.It Em Accept-self-signed
If this tag is defined, whatever the value is, certificates that
do not originate from a trusted CA but are self-signed will be
accepted.
.It Em Ca-directory
A directory containing PEM certificates of certification authorities
that we trust to sign other certificates.
Note that for a CA to be really trusted, it needs to be somehow
referred to by policy, in
.Xr isakmpd.policy 5 .
The certificates in this directory are used for the actual X.509
authentication and for cross-referencing policies that refer to
Distinguished Names (DNs).
Keeping a separate directory (as opposed to integrating policies
and X.509 CA certificates) allows for maintenance of a list of
"well known" CAs without actually having to trust all (or any) of them.
.It Em Cert-directory
A directory containing PEM certificates that we trust to be valid.
These certificates are used in preference to those passed in messages and
are required to have a subjectAltName extension containing the certificate
holder identity; usually IP address, FQDN, or User FQDN, as provided by
.Xr certpatch 8 .
.It Em Private-key
The private key matching the public key of our certificate (which should be
in the "Cert-directory", and have an appropriate subjectAltName field).
.El
.El
.Ss Referred-to sections
.Bl -hang -width 12n
.It Em <ISAKMP-peer>
Parameters for negotiation with an ISAKMP peer
.Bl -tag -width 12n
.It Em Phase
The constant
.Li 1 ,
as ISAKMP-peers and IPsec-connections
really are handled by the same code inside isakmpd.
.It Em Transport
The name of the transport protocol, defaults to
.Li UDP .
.It Em Port
In case of
.Li UDP ,
the
.Li UDP
port number to send to.
This is optional, the
default value is 500 which is the IANA-registered number for ISAKMP.
.It Em Local-address
The Local IP-address to use, if we are multi-homed, or have aliases.
.It Em Address
If existent, the IP-address of the peer.
.It Em Configuration
The name of the ISAKMP-configuration section to use.
Look at <ISAKMP-configuration> below.
If unspecified, defaults to "Default-phase-1-configuration".
.It Em Authentication
If existent, authentication data for this specific peer.
In the case of preshared key, this is the key value itself.
.It Em ID
If existent, the name of the section that describes the
local client ID that we should present to our peer.
If not present, it
defaults to the address of the local interface we are sending packets
over to the remote daemon.
Look at <Phase1-ID> below.
.It Em Remote-ID
If existent, the name of the section that describes the remote client
ID we expect the remote daemon to send us.
If not present, it defaults to the address of the remote daemon.
Look at <Phase1-ID> below.
.It Em Flags
A comma-separated list of flags controlling the further
handling of the ISAKMP SA.
Currently there are no specific ISAKMP SA flags defined.
.El
.It Em <Phase1-ID>
.Bl -tag -width 12n
.It Em ID-type
The ID type as given by the RFC specifications.
For phase 1 this is currently
.Li IPV4_ADDR ,
.Li IPV4_ADDR_SUBNET ,
.Li IPV6_ADDR ,
.Li IPV6_ADDR_SUBNET ,
.Li FQDN ,
.Li USER_FQDN
or
.Li KEY_ID .
.It Em Address
If the ID-type is
.Li IPV4_ADDR
or
.Li IPV6_ADDR ,
this tag should exist and be an IP-address.
.It Em Network
If the ID-type is
.Li IPV4_ADDR_SUBNET
or
.Li IPV6_ADDR_SUBNET
this tag should exist and
be a network address.
.It Em Netmask
If the ID-type is
.Li IPV4_ADDR_SUBNET
or
.Li IPV6_ADDR_SUBNET
this tag should exist and
be a network subnet mask.
.It Em Name
If the ID-type is
.Li FQDN ,
.Li USER_FQDN
or
.Li KEY_ID ,
this tag should exist and contain a domain name, user@domain, or
other identifying string respectively.
.Pp
In the case of
.Li KEY_ID ,
note that the IKE protocol allows any octet sequence to be sent or
received under this payload, potentially including non-printable
ones.
.Xr isakmpd 8
can only transmit printable
.Li KEY_ID
payloads, but can receive and process arbitrary
.Li KEY_ID
payloads.
This effectively means that non-printable
.Li KEY_ID
remote identities cannot be verified through this means, although it
is still possible to do so through
.Xr isakmpd.policy 5 .
.El
.It Em <ISAKMP-configuration>
.Bl -tag -width 12n
.It Em DOI
The domain of interpretation as given by the RFCs.
Normally
.Li IPSEC .
If unspecified, defaults to
.Li IPSEC .
.It Em EXCHANGE_TYPE
The exchange type as given by the RFCs.
For main mode this is
.Li ID_PROT
and for aggressive mode it is
.Li AGGRESSIVE .
.It Em Transforms
A list of proposed transforms to use for protecting the
ISAKMP traffic.
These are actually names for sections
further describing the transforms.
Look at <ISAKMP-transform> below.
.El
.It Em <ISAKMP-transform>
.Bl -tag -width 12n
.It Em ENCRYPTION_ALGORITHM
The encryption algorithm as the RFCs name it, or ANY to denote that any
encryption algorithm proposed will be accepted.
.It Em KEY_LENGTH
For encryption algorithms with variable key length, this is
where the offered/accepted keylengths are described.
The value is of the offer-accept kind described above.
.It Em HASH_ALGORITHM
The hash algorithm as the RFCs name it, or ANY.
.It Em AUTHENTICATION_METHOD
The authentication method as the RFCs name it, or ANY.
.It Em GROUP_DESCRIPTION
The group used for Diffie-Hellman exponentiations, or ANY.
The names are symbolic, like
.Li MODP_768 , MODP_1024 , EC_155
and
.Li EC_185 .
.It Em PRF
The algorithm to use for the keyed pseudo-random function (used for key
derivation and authentication in phase 1), or ANY.
.It Em Life
A list of lifetime descriptions, or ANY.
In the former case, each
element is in itself a name of the section that defines the lifetime.
Look at <Lifetime> below.
If it is set to ANY, then any type of
proposed lifetime type and value will be accepted.
.El
.It Em <Lifetime>
.Bl -tag -width 12n
.It Em LIFE_TYPE
.Li SECONDS
or
.Li KILOBYTES
depending on the type of the duration.
Notice that this field may NOT be set to ANY.
.It Em LIFE_DURATION
An offer/accept kind of value, see above.
Can also be set to ANY.
.El
.It Em <IPsec-connection>
.Bl -tag -width 12n
.It Em Phase
The constant
.Li 2 ,
as ISAKMP-peers and IPsec-connections
really are handled by the same code inside isakmpd.
.It Em ISAKMP-peer
The name of the ISAKMP-peer which to talk to in order to
set up this connection.
The value is the name of an <ISAKMP-peer> section.
See above.
.It Em Configuration
The name of the IPsec-configuration section to use.
Look at <IPsec-configuration> below.
.It Em Local-ID
If existent, the name of the section that describes the
optional local client ID that we should present to our peer.
It is also used when we act as responders to find out what
<IPsec-connection> we are dealing with.
Look at <IPsec-ID> below.
.It Em Remote-ID
If existent, the name of the section that describes the
optional remote client ID that we should present to our peer.
It is also used when we act as responders to find out what
<IPsec-connection> we are dealing with.
Look at <IPsec-ID> below.
.It Em Flags
A comma-separated list of flags controlling the further
handling of the IPsec SA.
Currently only one flag is defined:
.Bl -tag -width 12n
.It Em Active-only
If this flag is given and this <IPsec-connection> is part of the phase 2
connections we automatically keep up, it will not automatically be used for
accepting connections from the peer.
.El
.El
.It Em <IPsec-configuration>
.Bl -tag -width 12n
.It Em DOI
The domain of interpretation as given by the RFCs.
Normally
.Li IPSEC .
If unspecified, defaults to
.Li IPSEC .
.It Em EXCHANGE_TYPE
The exchange type as given by the RFCs.
For quick mode this is
.Li QUICK_MODE .
.It Em Suites
A list of protection suites (bundles of protocols) usable for
protecting the IP traffic.
Each of the list elements is a name of an <IPsec-suite> section.
See below.
.El
.It Em <IPsec-suite>
.Bl -tag -width 12n
.It Em Protocols
A list of the protocols included in this protection suite.
Each of the list elements is a name of an <IPsec-protocol>
section.
See below.
.El
.It Em <IPsec-protocol>
.Bl -tag -width 12n
.It Em PROTOCOL_ID
The protocol as given by the RFCs.
Acceptable values today are
.Li IPSEC_AH
and
.Li IPSEC_ESP .
.It Em Transforms
A list of transforms usable for implementing the protocol.
Each of the list elements is a name of an <IPsec-transform>
section.
See below.
.It Em ReplayWindow
The size of the window used for replay protection.
This is normally left alone.
Look at the
.Nm ESP
and
.Nm AH
RFCs for a better description.
.El
.It Em <IPsec-transform>
.Bl -tag -width 12n
.It Em TRANSFORM_ID
The transform ID as given by the RFCs.
.It Em ENCAPSULATION_MODE
The encapsulation mode as given by the RFCs.
This means TRANSPORT or TUNNEL.
.It Em AUTHENTICATION_ALGORITHM
The optional authentication algorithm in the case of this
being an ESP transform.
.It Em GROUP_DESCRIPTION
An optional (provides PFS if present) Diffie-Hellman group
description.
The values are the same as GROUP_DESCRIPTION's
in <ISAKMP-transform> sections shown above.
.It Em Life
List of lifetimes, each element is a <Lifetime> section name.
.El
.It Em <IPsec-ID>
.Bl -tag -width 12n
.It Em ID-type
The ID type as given by the RFCs.
For IPsec this is currently
.Li IPV4_ADDR ,
.Li IPV6_ADDR ,
.Li IPV4_ADDR_SUBNET
or
.Li IPV6_ADDR_SUBNET .
.It Em Address
If the ID-type is
.Li IPV4_ADDR
or
.Li IPV6_ADDR
this tag should exist and be an IP-address.
.It Em Network
If the ID-type is
.Li IPV4_ADDR_SUBNET
or
.Li IPV6_ADDR_SUBNET
this tag should exist and
be a network address.
.It Em Netmask
If the ID-type is
.Li IPV4_ADDR_SUBNET
or
.Li IPV6_ADDR_SUBNET
this tag should exist and
be a network subnet mask.
.It Em Protocol
If the ID-type is
.Li IPV4_ADDR ,
.Li IPV4_ADDR_SUBNET ,
.Li IPV6_ADDR
or
.Li IPV6_ADDR_SUBNET
this tag indicates what transport protocol should be transmitted over
the SA.
If left unspecified, all transport protocols between the two address
(ranges) will be sent (or permitted) over that SA.
.It Em Port
If the ID-type is
.Li IPV4_ADDR ,
.Li IPV4_ADDR_SUBNET ,
.Li IPV6_ADDR
or
.Li IPV6_ADDR_SUBNET
this tag indicates what source or destination port is allowed to be
transported over the SA (depending on whether this is a local or
remote ID).
If left unspecified, all ports of the given transport protocol
will be transmitted (or permitted) over the SA.
The Protocol tag must be specified in conjunction with this tag.
.El
.El
.Ss Other sections
.Bl -hang -width 12n
.It Em <IKECFG-ID>
Parameters to use with IKE mode-config.
One ID per peer.
.Pp
An IKECFG-ID is written as [<ID-type>/<name>].
The following ID types are supported:
.Bl -tag -width 12n
.It IPv4
[ipv4/A.B.C.D]
.It IPv6
[ipv6/abcd:abcd::ab:cd]
.It FQDN
[fqdn/foo.bar.org]
.It UFQDN
[ufqdn/user@foo.bar.org]
.It ASN1_DN
[asn1_dn//C=aa/O=cc/...] (Note the double slashes as the DN itself
starts with a
.Sq / . )
.El
.Pp
Each section specifies what configuration values to return to the peer
requesting IKE mode-config.
Currently supported values are:
.Bl -tag -width 12n
.It Em Address
The peer's network address.
.It Em Netmask
The peer's netmask.
.It Em Nameserver
The IP address of a DNS nameserver.
.It Em WINS-server
The IP address of a WINS server.
.El
.It Em <Initiator-ID>
.Pp
During phase 1 negotiation
.Nm isakmpd
looks for a pre-shared key in the <ISAKMP-peer> section.
If no Authentication data is specified in that section, and
.Nm isakmpd
is not the initiator, it looks for Authentication data in a section named after
the initiator's phase 1 ID.
This allows mobile users with dynamic IP addresses
to have different shared secrets.
.Pp
This only works for aggressive mode because in main mode the remote
initiator ID would not yet be known.
.Pp
The name of the <Initiator-ID> section depends on the ID type sent by
the initiator.
Currently this can be:
.Bl -tag -width 12n
.It IPv4
[A.B.C.D]
.It IPv6
[abcd:abcd::ab:cd]
.It FQDN
[foo.bar.org]
.It UFQDN
[user@foo.bar.org]
.El
.El
.Sh FILES
.Bl -tag -width /etc/isakmpd/isakmpd.conf
.It Pa /etc/isakmpd/isakmpd.conf
The default
.Nm isakmpd
configuration file.
.It Pa /usr/share/ipsec/isakmpd/
A directory containing some sample
.Nm isakmpd
configuration files.
.El
.Sh EXAMPLES
An example of a configuration file:
.Bd -literal
# A configuration sample for the isakmpd ISAKMP/Oakley (aka IKE) daemon.

[General]
Listen-on=		10.1.0.2

# Incoming phase 1 negotiations are multiplexed on the source IP address
[Phase 1]
10.1.0.1=		ISAKMP-peer-west

# These connections are walked over after config file parsing and told
# to the application layer so that it will inform us when traffic wants to
# pass over them.
This means we can do on-demand keying.
[Phase 2]
Connections=		IPsec-east-west

# Default values are commented out.
[ISAKMP-peer-west]
Phase=			1
#Transport=		udp
Local-address=		10.1.0.2
Address=		10.1.0.1
#Port=			isakmp
#Port=			500
#Configuration=		Default-phase-1-configuration
Authentication=		mekmitasdigoat
#Flags=

[IPsec-east-west]
Phase=			2
ISAKMP-peer=		ISAKMP-peer-west
Configuration=		Default-quick-mode
Local-ID=		Net-east
Remote-ID=		Net-west
#Flags=

[Net-west]
ID-type=		IPV4_ADDR_SUBNET
Network=		192.168.1.0
Netmask=		255.255.255.0

[Net-east]
ID-type=		IPV4_ADDR_SUBNET
Network=		192.168.2.0
Netmask=		255.255.255.0

# Quick mode descriptions

[Default-quick-mode]
EXCHANGE_TYPE=		QUICK_MODE
Suites=			QM-ESP-3DES-SHA-PFS-SUITE,QM-ESP-AES-SHA-PFS-SUITE

# Data for an IKE mode-config peer
[asn1_dn//C=SE/L=SomeCity/O=SomeCompany/CN=SomePeer.company.com]
Address=		192.168.1.123
Netmask=		255.255.255.0
Nameserver=		192.168.1.10
WINS-server=		192.168.1.11

# pre-shared key based on initiator's phase 1 ID
[foo.bar.org]
Authentication=		mekmitasdigoat

#
# #####################################################################
# All configuration data below this point is not required as the example
# uses the predefined Main Mode transform and Quick Mode suite names.
# It is included here for completeness.  Note the default values for the
# [General] and [X509-certificates] sections just below.
# #####################################################################
#

[General]
Policy-file=		/etc/isakmpd/isakmpd.policy
Retransmits=		3
Exchange-max-time=	120

# KeyNote credential storage
[KeyNote]
Credential-directory=	/etc/isakmpd/keynote/

# Certificates stored in PEM format
[X509-certificates]
CA-directory=           /etc/isakmpd/ca/
Cert-directory=         /etc/isakmpd/certs/
CRL-directory=		/etc/isakmpd/crls/
Private-key=		/etc/isakmpd/private/local.key

# Default phase 1 description (Main Mode)

[Default-phase-1-configuration]
EXCHANGE_TYPE=		ID_PROT
Transforms=		3DES-SHA

# Main mode transforms
######################

# DES

[DES-MD5]
ENCRYPTION_ALGORITHM=	DES_CBC
HASH_ALGORITHM=		MD5
AUTHENTICATION_METHOD=	PRE_SHARED
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-1-lifetime

[DES-SHA]
ENCRYPTION_ALGORITHM=	DES_CBC
HASH_ALGORITHM=		SHA
AUTHENTICATION_METHOD=	PRE_SHARED
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-1-lifetime

# 3DES

[3DES-SHA]
ENCRYPTION_ALGORITHM=	3DES_CBC
HASH_ALGORITHM=		SHA
AUTHENTICATION_METHOD=	PRE_SHARED
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-1-lifetime

# Blowfish

[BLF-SHA]
ENCRYPTION_ALGORITHM=	BLOWFISH_CBC
KEY_LENGTH=		128,96:192
HASH_ALGORITHM=		SHA
AUTHENTICATION_METHOD=	PRE_SHARED
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-1-lifetime

# Blowfish, using DH group 4 (non-default)
[BLF-SHA-EC185]
ENCRYPTION_ALGORITHM=	BLOWFISH_CBC
KEY_LENGTH=		128,96:192
HASH_ALGORITHM=		SHA
AUTHENTICATION_METHOD=	PRE_SHARED
GROUP_DESCRIPTION=	EC2N_185
Life=			Default-phase-1-lifetime

# Quick mode protection suites
##############################

# DES

[QM-ESP-DES-SUITE]
Protocols=		QM-ESP-DES

[QM-ESP-DES-PFS-SUITE]
Protocols=		QM-ESP-DES-PFS

[QM-ESP-DES-MD5-SUITE]
Protocols=		QM-ESP-DES-MD5

[QM-ESP-DES-MD5-PFS-SUITE]
Protocols=		QM-ESP-DES-MD5-PFS

[QM-ESP-DES-SHA-SUITE]
Protocols=		QM-ESP-DES-SHA

[QM-ESP-DES-SHA-PFS-SUITE]
Protocols=		QM-ESP-DES-SHA-PFS

# 3DES

[QM-ESP-3DES-SHA-SUITE]
Protocols=		QM-ESP-3DES-SHA

[QM-ESP-3DES-SHA-PFS-SUITE]
Protocols=		QM-ESP-3DES-SHA-PFS

# AES

[QM-ESP-AES-SHA-SUITE]
Protocols=              QM-ESP-AES-SHA

[QM-ESP-AES-SHA-PFS-SUITE]
Protocols=              QM-ESP-AES-SHA-PFS

# AH

[QM-AH-MD5-SUITE]
Protocols=		QM-AH-MD5

[QM-AH-MD5-PFS-SUITE]
Protocols=		QM-AH-MD5-PFS

# AH + ESP (non-default)

[QM-AH-MD5-ESP-DES-SUITE]
Protocols=		QM-AH-MD5,QM-ESP-DES

[QM-AH-MD5-ESP-DES-MD5-SUITE]
Protocols=		QM-AH-MD5,QM-ESP-DES-MD5

[QM-ESP-DES-MD5-AH-MD5-SUITE]
Protocols=		QM-ESP-DES-MD5,QM-AH-MD5

# Quick mode protocols

# DES

[QM-ESP-DES]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-DES-XF

[QM-ESP-DES-MD5]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-DES-MD5-XF

[QM-ESP-DES-MD5-PFS]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-DES-MD5-PFS-XF

[QM-ESP-DES-SHA]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-DES-SHA-XF

# 3DES

[QM-ESP-3DES-SHA]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-3DES-SHA-XF

[QM-ESP-3DES-SHA-PFS]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-3DES-SHA-PFS-XF

[QM-ESP-3DES-SHA-TRP]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-3DES-SHA-TRP-XF

# AES

[QM-ESP-AES-SHA]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-AES-SHA-XF

[QM-ESP-AES-SHA-PFS]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-AES-SHA-PFS-XF

[QM-ESP-AES-SHA-TRP]
PROTOCOL_ID=		IPSEC_ESP
Transforms=		QM-ESP-AES-SHA-TRP-XF

# AH MD5

[QM-AH-MD5]
PROTOCOL_ID=		IPSEC_AH
Transforms=		QM-AH-MD5-XF

[QM-AH-MD5-PFS]
PROTOCOL_ID=		IPSEC_AH
Transforms=		QM-AH-MD5-PFS-XF

# Quick mode transforms

# ESP DES+MD5

[QM-ESP-DES-XF]
TRANSFORM_ID=		DES
ENCAPSULATION_MODE=	TUNNEL
Life=			Default-phase-2-lifetime

[QM-ESP-DES-MD5-XF]
TRANSFORM_ID=		DES
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_MD5
Life=			Default-phase-2-lifetime

[QM-ESP-DES-MD5-PFS-XF]
TRANSFORM_ID=		DES
ENCAPSULATION_MODE=	TUNNEL
GROUP_DESCRIPTION=	MODP_1024
AUTHENTICATION_ALGORITHM=	HMAC_MD5
Life=			Default-phase-2-lifetime

[QM-ESP-DES-SHA-XF]
TRANSFORM_ID=		DES
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_SHA
Life=			Default-phase-2-lifetime

# 3DES

[QM-ESP-3DES-SHA-XF]
TRANSFORM_ID=		3DES
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_SHA
Life=			Default-phase-2-lifetime

[QM-ESP-3DES-SHA-PFS-XF]
TRANSFORM_ID=		3DES
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_SHA
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-2-lifetime

[QM-ESP-3DES-SHA-TRP-XF]
TRANSFORM_ID=		3DES
ENCAPSULATION_MODE=	TRANSPORT
AUTHENTICATION_ALGORITHM=	HMAC_SHA
Life=			Default-phase-2-lifetime

# AES

[QM-ESP-AES-SHA-XF]
TRANSFORM_ID=		AES
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_SHA
Life=			Default-phase-2-lifetime

[QM-ESP-AES-SHA-PFS-XF]
TRANSFORM_ID=		AES
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_SHA
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-2-lifetime

[QM-ESP-AES-SHA-TRP-XF]
TRANSFORM_ID=		AES
ENCAPSULATION_MODE=	TRANSPORT
AUTHENTICATION_ALGORITHM=	HMAC_SHA
Life=			Default-phase-2-lifetime

# AH

[QM-AH-MD5-XF]
TRANSFORM_ID=		MD5
ENCAPSULATION_MODE=	TUNNEL
AUTHENTICATION_ALGORITHM=	HMAC_MD5
Life=			Default-phase-2-lifetime

[QM-AH-MD5-PFS-XF]
TRANSFORM_ID=		MD5
ENCAPSULATION_MODE=	TUNNEL
GROUP_DESCRIPTION=	MODP_1024
Life=			Default-phase-2-lifetime

[Sample-Life-Time]
LIFE_TYPE=		SECONDS
LIFE_DURATION=		3600,1800:7200

[Sample-Life-Volume]
LIFE_TYPE=		KILOBYTES
LIFE_DURATION=		1000,768:1536
.Ed
.Sh SEE ALSO
.Xr keynote 1 ,
.Xr ipsec 4 ,
.Xr keynote 4 ,
.Xr isakmpd.policy 5 ,
.Xr isakmpd 8
.Sh BUGS
The RFCs do not permit differing DH groups in the same proposal for
aggressive and quick mode exchanges.
Mixing both PFS and non-PFS suites in a quick mode proposal is not possible,
as PFS implies using a DH group.