secure anycast tunneling protocol (satp)

SATP is somehow a mixture of a generic encapsulation protocol like GRE and a secure tunneling protocol as IPsec in tunnel mode. To save some header overhead it uses the encryption technices of SRTP. It supports peer to peer tunnels, where tunnel endpoints can be any combination of unicast, multicast or anycast hosts, so it defines a Host Anycast Service

This section gives an overview of possible usage scenarios. Please note, that the protocols used in the figures are only examples and that SATP itself does not care about either transport protocols or encapsulated protocols. Routing is not done by SATP and each implemetation MAY choose it's own way of doing this task (e.g. using functions provided by the operating system). SATP is used only to encapsulate and encrypt data.

An example of SATP used to tunnel in a unicast client - anycast server model --------- router ----------- / \ unicast ------+---------- router ------------+------ unicast host \ / host --------- router ----------- unicast | encrypted | anycast | encrypted | unicast tunnel | communication | tunnel | communication | tunnel endpoint | using SATP | endpoint | using SATP | endpoint In this scenario the payload gets encapsuleted into a SATP packet by a unicast host and gets transmitted to one of the anycast routers. It than gets decapsulated by the router. This router makes a routing descision based on the underlying protocol and transmits a new SATP package to one or more unicast hosts depending on the routing descition.

An example of SATP used to connect 2 networks Router ----------- ---------------Router / \ / \ Network - Router ------------x Network A \ / \ / B Router ----------- ---------------Router | packets | packets | packets | plaintext | get | take a | get | plaintext packets | de/encrypted | random | de/encrypted | packets |de/encapsulated| path |de/encapsulated| Network A has multiple routers, that act as gateway/tunnel endpoints to another network B. This is done to build a redundant encrypted tunnel connection between the two networks. All tunnel endpoints of network A share the same anycast address and all tunnel endpoints of network B share another anycast address. When a packet from network A gets transmitted to network B, it first arrives on one of network A's border routers. Which router is used is determined by network A's internal routing. This router encapsulates the package and sends it to the anycast address of the network B routers. The SATP packet arrives at one of network B's routers and gets decapsulated and routed to it's destination within network B.

SATP does not depend on which lower layer protocols is used, but it's most likely used on top of IP or UDP. This section should only discuss some issues on IP and UDP in combination with anycasting and tunnels.

Examples of SATP used with different lower layer and payload protocols +------+-----+-------------------------------+ | | | + ---------------+------ | | IPv6 | UDP | SATP | Ethernet 802.3 | ... | | | | | +----------------+-----+ | +------+-----+-------------------------------+ Tunneling of Ethernet over UDP/IPv6 +------+-----+---------------------------+ | | | +------+-----+-----+ | | IPv4 | UDP | SATP | IPv6 | UDP | RTP | | | | | +------+-----+-----+ | +------+-----+---------------------------+ Tunneling of IPv6 over UDP/IPv4 with RTP payload +------+-------------------------------+ | | + ---------------+------ | | IPv6 | SATP | Ethernet 802.3 | ... | | | | +----------------+-----+ | +------+-------------------------------+ Tunneling of Ethernet over IPv6 +------+---------------------------+ | | +------+-----+-----+ | | IPv4 | SATP | IPv6 | UDP | RTP | | | | +------+-----+-----+ | +------+---------------------------+ Tunneling of IPv6 over IPv4 with RTP payload When using UDP no flow control or retransmission is done, neither by UDP nor anytun. The encapsulated protocol HAS TO take care of this tasks if needed. UDP however has a checksum of the complete UDP datagram, so a packet gets discarded if there is a biterror in the payload

The only way of fully supporting fragmentation would be to synchronise fragments between all anycast servers. This is considered to be too much overhead, so there are two non perfect solutions for these problems. Either fragmentation HAS TO be disabled or if not all fragments arrive at the same server the ip datagramm HAS TO be discarded. As routing changes are not expected to occure very frequently, the encapsulated protocol can do a retransmission and all fragments will arrive at the new server.

Protocol Format 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | sequence number | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ | | sender ID # | | +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ + | | | .... payload ... | | | |-------------------------------+-------------------------------+ | | | padding (OPT) | pad count(OPT)| payload type | | +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+-+ | ~ MKI (OPTIONAL) ~ | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | : authentication tag (RECOMMENDED) : | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | +- Encrypted Portion* Authenticated Portion ---+

The sender ID is a 16bit unsigned integer. It HAS TO be unique for every sender sharing the same anycast address

The sequence number is a 32 bit unsigned integer in network byte order. It starts with a random value and is increased by 1 for every sent packet. After the maximum value, it starts over from 0. This overrun causes the ROC to be increased.

A packet of the type payload type (e.g. an IP packet).

Padding of max 255 octets. None of the pre-defined encryption transforms uses any padding; for these, the plaintext and encrypted payload sizes match exactly. Transforms are based on transforms of the SRTP protocol and these transforms might use the RTP padding format, so a RTP like padding is supported. If padding field is present, than the padding count field MUST be set to the padding lenght.

The number of octets of the padding field. This field is optional. It's presence is signaled by the key management and not by this protocol. If this field isn't present, the padding field MUST NOT be present as well.

The payload type field defines the payload protocol. ETHER TYPE protocol numbers are used. See IANA assigned ethernet numbers . The values 0000-05DC are reserverd and MUST NOT be used.

Some examples for protocol types HEX 0000 Reserved .... Reserved 05DC Reserved 0800 Internet IP (IPv4) 6558 transparent ethernet bridging 86DD IPv6

Encryption is done in the same way as for SRTP. This section will only discuss some small changes that HAVE TO be made.