From cf0c74e107c5b56fd3f0b425e1e103f4bb47c1ff Mon Sep 17 00:00:00 2001 From: Christian Pointner Date: Sat, 5 Dec 2009 13:33:22 +0000 Subject: removed common stuff (moved to repo anytun-common) --- ...nycast VOIP Proxy Resultat und Meilensteine.pdf | Bin 24937 -> 0 bytes papers/Anycast VOIP Proxy Zeitplan.pdf | Bin 10546 -> 0 bytes papers/Dokumentation.odt | Bin 28184 -> 0 bytes papers/Makefile | 13 - papers/acn/acn.ppt | Bin 752640 -> 0 bytes papers/acn/anycast-dns-lan.dia | Bin 1879 -> 0 bytes papers/acn/app_anycast_rtp_proxy.dia | Bin 3323 -> 0 bytes papers/acn/app_securing_anycast_services.dia | Bin 3398 -> 0 bytes papers/acn/app_tunnel_2_networks.dia | Bin 2907 -> 0 bytes papers/acn/app_unicast_vpn_concentrator.dia | Bin 3320 -> 0 bytes papers/acn/enc4-6ur.dia | Bin 1172 -> 0 bytes papers/acn/enc6-e.dia | Bin 1173 -> 0 bytes papers/acn/header-auth.dia | Bin 1426 -> 0 bytes papers/acn/header-enc.dia | Bin 1422 -> 0 bytes papers/acn/header.dia | Bin 1380 -> 0 bytes papers/acn/kd-auth.dia | Bin 1550 -> 0 bytes papers/acn/kd-enc.dia | Bin 1619 -> 0 bytes papers/acn/kx-ipsec.dia | Bin 1469 -> 0 bytes papers/acn/kx-ovpn.dia | Bin 1102 -> 0 bytes papers/acn/kx-satp.dia | Bin 1606 -> 0 bytes papers/anycast-voip-diagramm.pdf | Bin 73755 -> 0 bytes papers/anycast_und_kryptographie.odt | Bin 42480 -> 0 bytes papers/anycast_und_kryptographie.pdf | Bin 117053 -> 0 bytes ...intner-secure-anycast-tunneling-protocol-01.txt | 1456 -------------------- ...intner-secure-anycast-tunneling-protocol-01.xml | 527 ------- ...enger-secure-anycast-tunneling-protocol-02.html | 687 --------- ...senger-secure-anycast-tunneling-protocol-02.txt | 952 ------------- ...senger-secure-anycast-tunneling-protocol-02.xml | 299 ---- papers/linuxtage2008.odp | Bin 102663 -> 0 bytes papers/realraum.odp | Bin 102953 -> 0 bytes papers/titelseite_anycast_und_kryptographie.odt | Bin 8907 -> 0 bytes papers/vortrag | 21 - 32 files changed, 3955 deletions(-) delete mode 100644 papers/Anycast VOIP Proxy Resultat und Meilensteine.pdf delete mode 100644 papers/Anycast VOIP Proxy Zeitplan.pdf delete mode 100644 papers/Dokumentation.odt delete mode 100644 papers/Makefile delete mode 100644 papers/acn/acn.ppt delete mode 100644 papers/acn/anycast-dns-lan.dia delete mode 100644 papers/acn/app_anycast_rtp_proxy.dia delete mode 100644 papers/acn/app_securing_anycast_services.dia delete mode 100644 papers/acn/app_tunnel_2_networks.dia delete mode 100644 papers/acn/app_unicast_vpn_concentrator.dia delete mode 100644 papers/acn/enc4-6ur.dia delete mode 100644 papers/acn/enc6-e.dia delete mode 100644 papers/acn/header-auth.dia delete mode 100644 papers/acn/header-enc.dia delete mode 100644 papers/acn/header.dia delete mode 100644 papers/acn/kd-auth.dia delete mode 100644 papers/acn/kd-enc.dia delete mode 100644 papers/acn/kx-ipsec.dia delete mode 100644 papers/acn/kx-ovpn.dia delete mode 100644 papers/acn/kx-satp.dia delete mode 100644 papers/anycast-voip-diagramm.pdf delete mode 100644 papers/anycast_und_kryptographie.odt delete mode 100644 papers/anycast_und_kryptographie.pdf delete mode 100644 papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.txt delete mode 100644 papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.xml delete mode 100644 papers/draft-gsenger-secure-anycast-tunneling-protocol-02.html delete mode 100644 papers/draft-gsenger-secure-anycast-tunneling-protocol-02.txt delete mode 100644 papers/draft-gsenger-secure-anycast-tunneling-protocol-02.xml delete mode 100644 papers/linuxtage2008.odp delete mode 100644 papers/realraum.odp delete mode 100644 papers/titelseite_anycast_und_kryptographie.odt delete mode 100644 papers/vortrag (limited to 'papers') diff --git a/papers/Anycast VOIP Proxy Resultat und Meilensteine.pdf b/papers/Anycast VOIP Proxy Resultat und Meilensteine.pdf deleted file mode 100644 index 6df9308..0000000 Binary files a/papers/Anycast VOIP Proxy Resultat und Meilensteine.pdf and /dev/null differ diff --git a/papers/Anycast VOIP Proxy Zeitplan.pdf b/papers/Anycast VOIP Proxy Zeitplan.pdf deleted file mode 100644 index 87ed6b4..0000000 Binary files a/papers/Anycast VOIP Proxy Zeitplan.pdf and /dev/null differ diff --git a/papers/Dokumentation.odt b/papers/Dokumentation.odt deleted file mode 100644 index a4a85c2..0000000 Binary files a/papers/Dokumentation.odt and /dev/null differ diff --git a/papers/Makefile b/papers/Makefile deleted file mode 100644 index 43c308e..0000000 --- a/papers/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -%.html : %.xml - xml2rfc $^ $@ -%.txt : %.xml - xml2rfc $^ $@ - -PAPERS = draft-gsenger-secure-anycast-tunneling-protocol-02.html \ - draft-gsenger-secure-anycast-tunneling-protocol-02.txt - -all: doc -doc: $(PAPERS) - -clean: - rm -f $(PAPERS) diff --git a/papers/acn/acn.ppt b/papers/acn/acn.ppt deleted file mode 100644 index 126cd5b..0000000 Binary files a/papers/acn/acn.ppt and /dev/null differ diff --git a/papers/acn/anycast-dns-lan.dia b/papers/acn/anycast-dns-lan.dia deleted file mode 100644 index c80a07f..0000000 Binary files a/papers/acn/anycast-dns-lan.dia and /dev/null differ diff --git a/papers/acn/app_anycast_rtp_proxy.dia b/papers/acn/app_anycast_rtp_proxy.dia deleted file mode 100644 index fea87e9..0000000 Binary files a/papers/acn/app_anycast_rtp_proxy.dia and /dev/null differ diff --git a/papers/acn/app_securing_anycast_services.dia b/papers/acn/app_securing_anycast_services.dia deleted file mode 100644 index ab6b20b..0000000 Binary files a/papers/acn/app_securing_anycast_services.dia and /dev/null differ diff --git a/papers/acn/app_tunnel_2_networks.dia b/papers/acn/app_tunnel_2_networks.dia deleted file mode 100644 index 0d9f20c..0000000 Binary files a/papers/acn/app_tunnel_2_networks.dia and /dev/null differ diff --git a/papers/acn/app_unicast_vpn_concentrator.dia b/papers/acn/app_unicast_vpn_concentrator.dia deleted file mode 100644 index fa61c2c..0000000 Binary files a/papers/acn/app_unicast_vpn_concentrator.dia and /dev/null differ diff --git a/papers/acn/enc4-6ur.dia b/papers/acn/enc4-6ur.dia deleted file mode 100644 index 25756d9..0000000 Binary files a/papers/acn/enc4-6ur.dia and /dev/null differ diff --git a/papers/acn/enc6-e.dia b/papers/acn/enc6-e.dia deleted file mode 100644 index c394a68..0000000 Binary files a/papers/acn/enc6-e.dia and /dev/null differ diff --git a/papers/acn/header-auth.dia b/papers/acn/header-auth.dia deleted file mode 100644 index 4522feb..0000000 Binary files a/papers/acn/header-auth.dia and /dev/null differ diff --git a/papers/acn/header-enc.dia b/papers/acn/header-enc.dia deleted file mode 100644 index 9083401..0000000 Binary files a/papers/acn/header-enc.dia and /dev/null differ diff --git a/papers/acn/header.dia b/papers/acn/header.dia deleted file mode 100644 index d69be0f..0000000 Binary files a/papers/acn/header.dia and /dev/null differ diff --git a/papers/acn/kd-auth.dia b/papers/acn/kd-auth.dia deleted file mode 100644 index c7506ae..0000000 Binary files a/papers/acn/kd-auth.dia and /dev/null differ diff --git a/papers/acn/kd-enc.dia b/papers/acn/kd-enc.dia deleted file mode 100644 index bfb7644..0000000 Binary files a/papers/acn/kd-enc.dia and /dev/null differ diff --git a/papers/acn/kx-ipsec.dia b/papers/acn/kx-ipsec.dia deleted file mode 100644 index 296ddce..0000000 Binary files a/papers/acn/kx-ipsec.dia and /dev/null differ diff --git a/papers/acn/kx-ovpn.dia b/papers/acn/kx-ovpn.dia deleted file mode 100644 index 2641220..0000000 Binary files a/papers/acn/kx-ovpn.dia and /dev/null differ diff --git a/papers/acn/kx-satp.dia b/papers/acn/kx-satp.dia deleted file mode 100644 index eb9e47c..0000000 Binary files a/papers/acn/kx-satp.dia and /dev/null differ diff --git a/papers/anycast-voip-diagramm.pdf b/papers/anycast-voip-diagramm.pdf deleted file mode 100644 index af3eb78..0000000 Binary files a/papers/anycast-voip-diagramm.pdf and /dev/null differ diff --git a/papers/anycast_und_kryptographie.odt b/papers/anycast_und_kryptographie.odt deleted file mode 100644 index 23d1b83..0000000 Binary files a/papers/anycast_und_kryptographie.odt and /dev/null differ diff --git a/papers/anycast_und_kryptographie.pdf b/papers/anycast_und_kryptographie.pdf deleted file mode 100644 index 495d629..0000000 Binary files a/papers/anycast_und_kryptographie.pdf and /dev/null differ diff --git a/papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.txt b/papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.txt deleted file mode 100644 index a636f71..0000000 --- a/papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.txt +++ /dev/null @@ -1,1456 +0,0 @@ - - - -Network Working Group O. Gsenger -Internet-Draft C. Pointner -Expires: October 3, 2009 April 2009 - - - secure anycast tunneling protocol (SATP) - draft-gsenger-pointner-secure-anycast-tunneling-protocol-01 - -Status of this Memo - - By submitting this Internet-Draft, each author represents that any - applicable patent or other IPR claims of which he or she is aware - have been or will be disclosed, and any of which he or she becomes - aware will be disclosed, in accordance with Section 6 of BCP 79. - - Internet-Drafts are working documents of the Internet Engineering - Task Force (IETF), its areas, and its working groups. Note that - other groups may also distribute working documents as Internet- - Drafts. - - Internet-Drafts are draft documents valid for a maximum of six months - and may be updated, replaced, or obsoleted by other documents at any - time. It is inappropriate to use Internet-Drafts as reference - material or to cite them other than as "work in progress." - - The list of current Internet-Drafts can be accessed at - http://www.ietf.org/ietf/1id-abstracts.txt. - - The list of Internet-Draft Shadow Directories can be accessed at - http://www.ietf.org/shadow.html. - - This Internet-Draft will expire on October 3, 2009. - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 1] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -Abstract - - The secure anycast tunneling protocol (SATP) defines a protocol used - for communication between any combination of unicast and anycast - tunnel endpoints. It allows tunneling of every ETHER TYPE protocol - (ethernet, ip ...). SATP directly includes cryptography and message - authentication based on the methods used by the Secure Real-time - Transport Protocol(SRTP) [RFC3711]. It can be used as an encrypted - alternative to IP Encapsulation within IP [RFC2003] and Generic - Routing Encapsulation (GRE) [RFC2784]. Both anycast receivers and - senders are supported. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 2] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -Table of Contents - - 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1.1. Notational Conventions . . . . . . . . . . . . . . . . . . 4 - 2. Motivation and usage scenarios . . . . . . . . . . . . . . . . 5 - 2.1. Usage scenarions . . . . . . . . . . . . . . . . . . . . . 5 - 2.1.1. Tunneling from unicast hosts over anycast routers - to other unicast hosts . . . . . . . . . . . . . . . . 5 - 2.1.2. Tunneling from unicast hosts to anycast networks . . . 6 - 2.1.3. Redundant tunnel connection of 2 networks . . . . . . 6 - 2.2. Encapsulation . . . . . . . . . . . . . . . . . . . . . . 7 - 3. Using SATP on top of IP . . . . . . . . . . . . . . . . . . . 9 - 3.1. Fragmentation . . . . . . . . . . . . . . . . . . . . . . 9 - 3.2. ICMP messages . . . . . . . . . . . . . . . . . . . . . . 9 - 4. Protocol specification . . . . . . . . . . . . . . . . . . . . 10 - 4.1. Header format . . . . . . . . . . . . . . . . . . . . . . 10 - 4.2. sequence number . . . . . . . . . . . . . . . . . . . . . 10 - 4.3. sender ID . . . . . . . . . . . . . . . . . . . . . . . . 10 - 4.4. MUX . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 4.5. payload type . . . . . . . . . . . . . . . . . . . . . . . 10 - 4.6. payload . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 4.7. padding (OPTIONAL) . . . . . . . . . . . . . . . . . . . . 11 - 4.8. padding count (OPTIONAL) . . . . . . . . . . . . . . . . . 11 - 4.9. authentication tag (RECOMMENDED) . . . . . . . . . . . . . 11 - 5. Cryptography . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 5.1. Basic Concepts . . . . . . . . . . . . . . . . . . . . . . 12 - 5.1.1. Cryptographic Contexts . . . . . . . . . . . . . . . . 12 - 5.1.2. SATP Packet Processing . . . . . . . . . . . . . . . . 13 - 5.1.3. Key derivation . . . . . . . . . . . . . . . . . . . . 15 - 5.2. Predefined Transforms . . . . . . . . . . . . . . . . . . 16 - 5.2.1. Encryption . . . . . . . . . . . . . . . . . . . . . . 16 - 5.2.2. Authentication and Integrity . . . . . . . . . . . . . 18 - 5.2.3. Key Derivation Pseudo Random Functions . . . . . . . . 18 - 5.3. Adding SATP Transforms . . . . . . . . . . . . . . . . . . 19 - 6. Key Managment and Anycast Synchronization Considerations . . . 20 - 7. Security Considerations . . . . . . . . . . . . . . . . . . . 21 - 7.1. Replay protection . . . . . . . . . . . . . . . . . . . . 21 - 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 22 - 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 9.1. Normative References . . . . . . . . . . . . . . . . . . . 23 - 9.2. Informational References . . . . . . . . . . . . . . . . . 23 - Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 25 - Intellectual Property and Copyright Statements . . . . . . . . . . 26 - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 3] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -1. Introduction - - SATP is a mixture of a generic encapsulation protocol like GRE - [RFC2784] and a secure tunneling protocol as IPsec [RFC2401] in - tunnel mode. It can be used to build redundant virtual private - network (VPN) connections. It supports peer-to-peer tunnels, where - tunnel endpoints can be any combination of unicast, multicast or - anycast hosts, so it defines a Host Anycast Service [RFC1546]. - Encryption is done per packet, so the protocol is robust against - packet loss and routing changes. To reduce header overhead, - encryption techniques similar to SRTP [RFC3711] are being used. - -1.1. Notational Conventions - - The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", - "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this - document are to be interpreted as described in RFC2119 [RFC2119]. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 4] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -2. Motivation and usage scenarios - - This section gives an overview of possible usage scenarios. Please - note that the protocols used in the figures are only examples and - that SATP itself does not care about either transport protocols or - encapsulated protocols. Routing is not done by SATP and each - implemetation MAY choose it's own way of doing this task (e.g. using - functions provided by the operating system). SATP is used only to - encapsulate and encrypt data. - -2.1. Usage scenarions - -2.1.1. Tunneling from unicast hosts over anycast routers to other - unicast hosts - - An example of SATP used to tunnel in a unicast client - anycast - server model - - --------- router ----------- - / \ - unicast ------+---------- router ------------+------ unicast - host \ / host - --------- router ----------- - - unicast | encrypted | anycast | encrypted | unicast - tunnel | communication | tunnel | communication | tunnel - endpoint | using SATP | endpoint | using SATP | endpoint - - Figure 1 - - In this scenario the payload is encapsuleted into a SATP packet by a - unicast host and gets transmitted to one of the anycast routers. - After transmisson the packet gets decapsulated by the router. This - router makes a routing descision based on the underlying protocol and - transmits a new SATP package to one or more unicast hosts depending - on this decision. - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 5] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -2.1.2. Tunneling from unicast hosts to anycast networks - - An example of SATP used to encrypt data between a unicast host and - anycast networks - - -------Router -+---- DNS Server - / \ - / --- 6to4 Router - / - unicast -------+----------Router --+--- DNS Server - host \ \ - \ --- 6to4 Router - \ - -------Router -+---- DNS Server - \ - --- 6to4 Router - - unicast | encrypted | anycast | plaintext - tunnel | communication | tunnel | anycast - endpoint | using SATP | endpoint | services - - - Figure 2 - - When the unicast hosts wants to transmit data to one of the anycast - DNS servers, it encapsulates the data and sends a SATP packet to the - anycast address of the routers. The packet arrives at one of the - routers, gets decapsulated and is then forwarded to the DNS server. - This method can be used to tunnel between clients and networks - providing anycast services. It can also be used the other way to - virtually locate a unicast service within anycasted networks. - -2.1.3. Redundant tunnel connection of 2 networks - - An example of SATP used to connect 2 networks - - Router ----------- ---------------Router - / \ / \ - Network - Router ------------x Network - A \ / \ / B - Router ----------- ---------------Router - - | packets | packets | packets | - plaintext | get | take a | get | plaintext - packets | de/encrypted | random | de/encrypted | packets - |de/encapsulated| path |de/encapsulated| - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 6] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - Figure 3 - - Network A has multiple routers which act as gateway/tunnel endpoints - to another network B. This way a redundant encrypted tunnel - connection between the two networks is built up. All tunnel - endpoints of network A share the same anycast address and all tunnel - endpoints of network B share another anycast address. When a packet - from network A is transmitted to network B, it first arrives on one - of network A's border routers. Which router is used is determined by - network A's internal routing. This router encapsulates the package - and sends it to the anycast address of network B's routers. After - arrival the SATP packet gets decapsulated and routed to its - destination within network B. - -2.2. Encapsulation - - SATP does not depend on the lower layer protocol. This section only - gives an example of how packets could look like. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 7] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - Examples of SATP used with different lower layer and payload - protocols - - +------+-----+-------------------------------+ - | | | +----------------+-----+ | - | IPv6 | UDP | SATP | Ethernet 802.3 | ... | | - | | | +----------------+-----+ | - +------+-----+-------------------------------+ - - Tunneling of Ethernet over UDP/IPv6 - - +------+-----+---------------------------+ - | | | +------+-----+-----+ | - | IPv4 | UDP | SATP | IPv6 | UDP | RTP | | - | | | +------+-----+-----+ | - +------+-----+---------------------------+ - - Tunneling of IPv6 over UDP/IPv4 with RTP payload - - +------+-------------------------------+ - | | +----------------+-----+ | - | IPv6 | SATP | Ethernet 802.3 | ... | | - | | +----------------+-----+ | - +------+-------------------------------+ - - Tunneling of Ethernet over IPv6 - - +------+---------------------------+ - | | +------+-----+-----+ | - | IPv4 | SATP | IPv6 | UDP | RTP | | - | | +------+-----+-----+ | - +------+---------------------------+ - - Tunneling of IPv6 over IPv4 with RTP payload - - Figure 4 - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 8] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -3. Using SATP on top of IP - -3.1. Fragmentation - - The only way of fully supporting fragmentation would be to - synchronise fragments between all anycast servers. This is - considered to be too much overhead, so there are two non-perfect - solutions for these problems. Either fragmentation HAS TO be - disabled or if not all fragments arrive at the same server the IP - datagramm HAS TO be discarded. As routing changes are not expected - to occur very frequently, the encapsulated protocol can do a - retransmission and all fragments will arrive at the new server. - - If the payload type is IP and the IP headers' Don't Fragment (DF) bit - is set, then the DF bit of the outer IP header HAS TO be set as well. - -3.2. ICMP messages - - ICMP messages MUST be relayed according to rfc2003 section 4 - [RFC2003]. This is needed for path MTU detection. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 9] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -4. Protocol specification - -4.1. Header format - - Protocol Format - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | sequence number | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | sender ID | MUX | | - +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ | - | | payload type | | | - | +-------------------------------+ | | - | | .... payload ... | | - | | +-------------------------------+ | - | | | padding (OPT) | pad count(OPT)| | - +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+-+ - | : authentication tag (RECOMMENDED) : | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | | - +- Encrypted Portion Authenticated Portion ---+ - - Figure 5 - -4.2. sequence number - - The sequence number is a 32 bit unsigned integer in network byte - order. The starting point is signaled by the key exchange mechanism - and then value is then increased by 1 for every packet sent. After - the maximum value it starts over from 0. - -4.3. sender ID - - The sender ID is a 16 bit unsigned integer. It HAS TO be unique for - every sender sharing the same anycast address. - -4.4. MUX - - The MUX (multiplex) field is a 16 bit unsigned integer. It is used - to distinguish multiple tunnel connections. - -4.5. payload type - - The payload type field defines the payload protocol. ETHER TYPE - protocol numbers are used. See IANA assigned ethernet numbers [1] . - The values 0000-05DC are reserverd and MUST NOT be used. - - - -Gsenger & Pointner Expires October 3, 2009 [Page 10] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - Some examples for protocol numbers - - HEX - 0000 Reserved - .... Reserved - 05DC Reserved - 0800 Internet IP (IPv4) - 6558 transparent ethernet bridging - 86DD IPv6 - - Figure 6 - -4.6. payload - - A packet of type payload type (e.g. an IP packet). - -4.7. padding (OPTIONAL) - - Padding of max 255 octets. None of the pre-defined encryption - transforms uses any padding; for these, the plaintext and encrypted - payload sizes match exactly. Transforms which may be added in future - (see Section 5.3) MUST define wheter they need padding or not and if - they need it they MUST define a proper padding format. If the - padding count field is present, the padding count field MUST be set - to the padding length. - -4.8. padding count (OPTIONAL) - - The number of octets of the padding field. This field is optional. - Its presence is signaled by the key management and not by this - protocol. If this field isn't present, the padding field MUST NOT be - present as well. - -4.9. authentication tag (RECOMMENDED) - - The authentication tag is RECOMMENDED and of configurable length. It - contains a cryptographic checksum of the sender ID, sequence number - and the encrypted portion. On transmitter side encryption HAS TO be - done before calculating the authentication tag. A receiver HAS TO - calculate the authentication tag before decrypting the encrypted - portion. - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 11] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -5. Cryptography - - As mentioned earlier the cryptography of SATP is based on SRTP - [RFC3711]. For that reason we recommend to read this document as - well (especially chapter 7 Rationale). However some modifications - were made in order to fit the changed conditions of SATP. The - following section describes the whole cryptography of SATP. - -5.1. Basic Concepts - - In order to cope with anycast and packet loss it is important to be - able to process one packet on its own without the need for packets - from the past as an additional information source. Therefore SATP as - well as SRTP [RFC3711] defines a so called cryptographic context. - This context consits of all information which is needed to process a - single SATP packet and is divided into packet specific parameters and - global parameters. The packet specific parameters can be found in - the protocol header and global parameters have to be generated by the - key exchange mechanism external to SATP (see Section 6). For anycast - sender the global parameters have to be synchronized between all - hosts which share the same anycast address. The packet specific - parameters MUST NOT be synchronized. - SATP uses two types of keys: master keys and session keys. A session - key is meant to be used for a cryptographic transform (encrytion or - message authentication) for one packet. The master keys are used to - derive packet-specific session keys in a cryptographical secure way. - -5.1.1. Cryptographic Contexts - -5.1.1.1. Global Parameters - - As mentioned above global parameters HAVE TO either be provided by - the key exchange mechanism or configured manually. - - o a master key(s) which MUST be random and kept secret. - - o a master salt which MUST be random and MAY be public (RECOMMENDED - to be kept secret as well). - - o a role specifier used by the key derivation to determine which - session keys to generate for outbound or inbound traffic. - - o identifier for the key derivation pseudo random function. - - o identifier for the encryption algorithm (i.e. cipher and its mode - of operation). - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 12] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - o if used an identifier for the authentication algorithm. - - o transform specific parameters such as key lengths, see - Section 5.2. - - o if used the length of the authentication tag which should be - truncated to the packet. - - o an indicator which specifies if padding is needed or not (presence - of padding count field). - - o a replay list for each sender (see Section 5.1.1.3), maintained by - the receiver which contains the sequence numbers of received and - authenticated packets, this lists may be implemented as a sliding - window. - - o a [ From , To ] value pair which specifies the lifetime of a - master key (including the range endpoints), expressed in terms of - a pair of 32-bit sequence numbers. - -5.1.1.2. Packet-Specific Parameters - - o the sequence number - - o the sender id - - o the mux value - -5.1.1.3. Mapping SATP packets to Cryptographic Contexts - - A cryptographic contexts SHALL be uniquely identifed by the tuple - context identifier: - - context id = [ source address , source port ] - - In order to cope with anycast sender and replay protection there HAS - TO be more than one replay list per context. Each replay list inside - a cryptographic context SHALL be uniquely identified by the sender - id. - -5.1.2. SATP Packet Processing - - Before any SATP packet can be processed a cryptographic context HAS - TO be initialized by the key management mechanism. After that a SATP - sender SHALL do the following to create a SATP packet: - - 1. Determine the next sequence number to use. - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 13] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - 2. Determine the crypotgraphic context as described in - Section 5.1.1.3. - - 3. Determine the master key and master salt for the packets sequence - number. - - 4. Compute all session keys and session salts which are needed by - the encryption transform using the key derivation pseudo random - function. - - 5. Encrypt the payload type field concatenated with the payload to - produce the encrypted portion of the packet using the encryption - algorithm defined by the cryptographic context. - - 6. Fill in sender id, mux and sequence number fields. - - 7. If needed compute the session authentication key using the key - derivation pseudo random function. - - 8. Generate the authentication tag over the authenticated portion - using the authentication algorithm defined by the cryptographic - context and append it to the packet. - - On receiver side the packet SHALL be processed as follows: - - 1. Determine the crypotgraphic context as described in - Section 5.1.1.3. - - 2. Determine the master key and master salt for the packets - sequence number. - - 3. Check if the packet was replayed using the replay list for the - packets sender id. - - 4. If needed compute the session authentication key using the key - derivation pseudo random function. - - 5. Generate the authentication tag over the authenticated portion - using the authentication algorithm defined by the crpyptographic - context and compare it with the tag appended to the received - packet. If it is equal remove the tag and move on. If it is - not equal drop the packet. - - 6. Store the sequence number in the replay list. - - 7. Compute all session keys and session salts which are needed by - the encryption transform using the key derivation pseudo random - function. - - - -Gsenger & Pointner Expires October 3, 2009 [Page 14] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - 8. Decrypt the encrypted portion using the encryption algorithm - defined by the cryptographic context. - - 9. Check if the payload type is supported by this tunnel endpoint - and discard the packet in case it isn't supported. - - 10. Remove all fields beside the payload itself from the packet. - -5.1.3. Key derivation - - Any encryption or message authentication transform which is used - (predefined or newly introduced according to Section 5.3) MUST obtain - its secret values (keys and salts) using the SATP key derivation. - After the key exchange mechanism has signaled all needed parameters - (i.e. master key and salt) no additional communiction between sender - and receiver is needed until the next rekeying takes place. To - achieve this the key derivation uses an pseudo random function seeded - by the master key, master salt, the packets sequence number and a - label (identifier for the key to compute). - - SATP key derivation - - packet sequence nummber ----+ - | - V - +------------+ master +------------+ - | | key | |--> session encryption key - | ext. key |------->| key | - | management | | |--> session encryption salt - | mechanism |------->| derivation | - | | master | |--> session authentication key - +------------+ salt +------------+ - - Figure 7 - - SRTP [RFC3711] defines a pseudo random function as follows: - Let m and n be positive integers. A pseudo-random function family is - a set of keyed functions {PRF_n(k,x)} such that for the (secret) - random key k, given m-bit x, PRF_n(k,x) is an n-bit string, - computationally indistinguishable from random n-bit strings. - - For SATP key generation a pseudo random function with at least m = - 128 MUST be used. A predefined transform can be found in - Section 5.2.3. The input x of the PRF SHOULD be calculated as - follows: - - 1. Let key_id = label || sequence_number, with label defined as - below. - - - -Gsenger & Pointner Expires October 3, 2009 [Page 15] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - 2. Let x = key_id XOR master_salt, where key_id and master_salt are - aligend so that their least significant bits agree (right- - alignment). - - For each key derived by the key derivation there MUST exist a unique - label, a 32-bit constant. In order to increase security SATP uses - different session keys for inbound and outbound traffic. The role - specifier from the cryptographic context is used to determine which - session keys to use for inbound and outbound packets. The labels can - be computed by calculateing the SHA1 hash over an increasing label- - index. The label value are the 32 leftmost bits of this hash value. - We currently define 6 labels (label-index from 1 to 6) future - extensions may use labels with an index from 7 upwards. - - +--------------------+-------+-------------+------------+ - | key type | role | label-index | label | - +--------------------+-------+-------------+------------+ - | encryption key | left | 1 | 0x356A192B | - | | | | | - | encryption key | right | 2 | 0xDA4B9237 | - | | | | | - | encryption salt | left | 3 | 0x77DE68DA | - | | | | | - | encryption salt | right | 4 | 0x1B645389 | - | | | | | - | authentication key | left | 5 | 0xAC3478D6 | - | | | | | - | authentication key | right | 6 | 0xC1DFD96E | - +--------------------+-------+-------------+------------+ - - Key Derivation Labels - - The role parameter specifies which label should be used for outbound - packets. This means a endpoint with role left MUST use the labels - marked with left for outgoing packets and expects inbound packets to - be encrypted/authenticated using the labels marked with right. - -5.2. Predefined Transforms - - While SATP as well as SRTP allows the use of various encryption and - message authentication algorithms interoperable implementations MUST - support at least the following transforms. To add additional - transforms see Section 5.3. - -5.2.1. Encryption - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 16] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -5.2.1.1. NULL Encryption - - If confidendtiality of the SATP packet is not an issue the null - encryption transform can be used to increase performance. This - transform just copies the plaintext input into the ciphertext output - wihtout any padding. The identifier for that transfrom SHOULD be - NULL and it don't needs any transform specific parameters. It also - doesn't need any key or salt values computed by the key derivation. - -5.2.1.2. AES in Counter Mode - - The following describes how to use AES in counter mode for SATP - encryption. The identifier for that transform SHOULD be AES-CTR- - or just AES-CTR in which case the key length defaults to - 128 bits. Beside the key length there are no additional transfrom - specific parameters. This transform needs a key of length - and a 112 bit salt. These values can be generated using - the key derivation pseudo random function as follows: - - session_key = PRF_(master_key, x) - session_salt = PRF_112(master_key, x) - with PRF and x defined as in Section 5.1.3. - - Basically AES in counter mode generates a pseudo random keystream - seeded by the session key, session salt as well as the sequence - number, sender id and mux value of the packet and encrypts a single - SATP packet using this stream. The encryption process consits of the - generation of that keystream and then bitwise exclusive-oring it onto - the packets payload. If the packet length doesn't fit a multiple of - 128 bits the remaining bits (least significant) of the keystream are - simple ingored. Therefore this transform does not need any padding. - Decryption of the packet can be achieved by generating the same - keystream and exclusive-oring it onto the encrypted portion. - -5.2.1.2.1. Keystream Generation - - In principle AES in counter mode consists of encrypting an - incrementing integer. However the starting point of the integer - value has to be randomized to get a good pseudo random key stream. A - keystream consits of several keystream segements with a size of 128 - bits (AES blocksize). Each segement can be computed by applying AES - with key k on the block CTR. The whole keystream is a concatination - of all its successive segements. Therefore a keystream looks as - follows: - - AES(session_key, CTR) || AES(session_key, CTR + 1 mod 2^128) || - AES(session_key, CTR + 2 mod 2^128) ... - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 17] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - where the 128 bit value CTR is defined as follows: - - CTR = (session_salt * 2^16) XOR (mux * 2^80) XOR (sender_id * 2^64) - XOR (sequence_number * 2^16) - - where each of the four terms are padded with as many leading zeros to - form a 128 bit value. - - Mind that the 16 least siginificant bits of CTR are zero. These bits - are used for the counter. Therefore the number of blocks generated - for one packet MUST NOT exceed 2^16 to avoid keystream reuse. This - means that the packet length MUST NOT exceed 2^16 * 128 bits = 2^23 - bits to ensure the security of the encryption. - -5.2.2. Authentication and Integrity - - It is RECOMMENDED to use an authentication tag and if it is used it - should be processed as follows. The sender generates the tag over - the authenticated portion truncates it to the left-most (most - significant) bits to fit the authentication tag length signaled by - the key exchange mechanism. After that it simple appends the tag to - the packet. The receiver computes the tag in the same way as the - sender and compares if with the received tag. If they don't match - the packet HAS TO be discarded and the incident SHOULD be logged. - -5.2.2.1. HMAC-SHA1 - - This transform uses HMAC-SHA1 (as described in [RFC2104]) as message - authentication algorithm. The identifier for the transfrom SHOULD be - SHA1 and it don't needs any transform specific parameters. The key - should be derived using the key derivation pseudo random function: - - session_auth_key = PRF_20(master_key, x) - with PRF and x defined as in Section 5.1.3 - -5.2.3. Key Derivation Pseudo Random Functions - -5.2.3.1. AES in Counter Mode - - Section 5.1.3 defines a pseudo random function which SHOULD be used - to derive session keys and salts. This describes the use of AES in - counter mode as PRF. The identifier for this PRF SHOULD be AES-CTR- - or just AES-CTR in which case the key length defaults to - 128 bits. Beside the key length there are no additional transform - specific parameters. This transform needs a master key of length - key_length and a 112 bit master salt. The pseudo random string - consists of several segements with a size of 128 bits (AES - blocksize). The whole string can be computed as follows: - - - -Gsenger & Pointner Expires October 3, 2009 [Page 18] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - - AES(master_key, CTR) || AES(master_key, CTR + 1 mod 2^128) || - AES(master_key, CTR + 2 mod 2^128) ... - - where the 128 bit value CTR is defined as x * 2^16, with x defined as - in Section 5.1.3. - - This pseudo random function can produce pseudo random strings up to a - length of 2^23 bits. If the requested output length n does not fit - multiples of 128 bits the output SHOULD be truncated to the n first - (left-most) bits. Therefore there are n/128, rounded up, - applications of AES needed to produce the output string. - -5.3. Adding SATP Transforms - - If a new transform is to be added to SATP a standard track RFC MUST - be written to define the usage of the new transform. Any overlap - between the new RFC and this document SHOULD be avoided but it MAY be - needed to update some of the information in this document. For - example new parameters MAY be added to the cryptographic context or - there MAY be additional steps in SATP packet processing. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 19] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -6. Key Managment and Anycast Synchronization Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 20] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -7. Security Considerations - - As the cryptography of SATP is based on SRTP [RFC3711], it basically - shares the same security issues. This section will only discuss some - small changes. Please read SRTP RFC3711 section 9 [RFC3711] for - details. - -7.1. Replay protection - - Replay protection is done by a replay list. Every anycast receiver - has its own replay list, which SHOULDN'T be syncronised because of - massive overhead. This leads to an additional possible attack. An - attacker is able to replay a captured packet once to every anycast - receiver. This attack is considered be very unlikely because - multiple attack hosts in different locations are needed to reach - seperate anycast receivers and the number of replays is limited to - count of receivers - 1. Such replays might also happen because of - routing problems, so a payload protocol HAS TO be robust against a - small number of duplicated packages. The window size and position - HAS TO be syncronised between multiple anycast receivers to limit - this attack. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 21] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -8. IANA Considerations - - The protocol is intended to be used on top of IP or on top of UDP (to - be compatible with NAT routers), so UDP and IP protocol numbers have - to be assiged by IANA. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 22] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -9. References - -9.1. Normative References - - [RFC3711] Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. - Norrman, "The Secure Real-time Transport Protocol (SRTP)", - RFC 3711, March 2004. - - [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate - Requirement Levels", BCP 14, RFC 2119, March 1997. - - [RFC2003] Perkins, C., "IP Encapsulation within IP", RFC 2003, - October 1996. - - [RFC2104] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed- - Hashing for Message Authentication", RFC 2104, - February 1997. - -9.2. Informational References - - [RFC2784] Farinacci, D., Li, T., Hanks, S., Meyer, D., and P. - Traina, "Generic Routing Encapsulation (GRE)", RFC 2784, - March 2000. - - [RFC2401] Kent, S. and R. Atkinson, "Security Architecture for the - Internet Protocol", RFC 2401, November 1998. - - [RFC1546] Partridge, C., Mendez, T., and W. Milliken, "Host - Anycasting Service", RFC 1546, November 1993. - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 23] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -URIs - - [1] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 24] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -Authors' Addresses - - Othmar Gsenger - Puerstingerstr 32 - Saalfelden 5760 - AT - - Phone: - Email: satp@gsenger.com - URI: http://www.gsenger.com/satp/ - - - Christian Pointner - Wielandgasse 19 - Graz 8010 - AT - - Phone: - Email: equinox@anytun.org - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 25] - -Internet-Draft secure anycast tunneling protocol (SATP) April 2009 - - -Full Copyright Statement - - Copyright (C) The IETF Trust (2009). - - This document is subject to the rights, licenses and restrictions - contained in BCP 78, and except as set forth therein, the authors - retain all their rights. - - This document and the information contained herein are provided on an - "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS - OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND - THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF - THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED - WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. - - -Intellectual Property - - The IETF takes no position regarding the validity or scope of any - Intellectual Property Rights or other rights that might be claimed to - pertain to the implementation or use of the technology described in - this document or the extent to which any license under such rights - might or might not be available; nor does it represent that it has - made any independent effort to identify any such rights. Information - on the procedures with respect to rights in RFC documents can be - found in BCP 78 and BCP 79. - - Copies of IPR disclosures made to the IETF Secretariat and any - assurances of licenses to be made available, or the result of an - attempt made to obtain a general license or permission for the use of - such proprietary rights by implementers or users of this - specification can be obtained from the IETF on-line IPR repository at - http://www.ietf.org/ipr. - - The IETF invites any interested party to bring to its attention any - copyrights, patents or patent applications, or other proprietary - rights that may cover technology that may be required to implement - this standard. Please address the information to the IETF at - ietf-ipr@ietf.org. - - - - - - - - - - - -Gsenger & Pointner Expires October 3, 2009 [Page 26] - diff --git a/papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.xml b/papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.xml deleted file mode 100644 index a57f1b4..0000000 --- a/papers/draft-gsenger-pointner-secure-anycast-tunneling-protocol-01.xml +++ /dev/null @@ -1,527 +0,0 @@ - - - - - - - - - -]> - - - - secure anycast tunneling protocol (SATP) - - -
- - Puerstingerstr 32 - Saalfelden - 5760 - AT - - - satp@gsenger.com - http://www.gsenger.com/satp/ -
- - - -
- - Wielandgasse 19 - Graz - 8010 - AT - - - equinox@anytun.org -
- - - - - General - - satp - Internet-Draft - secure anycast tunneling protocol - anycast - tunnel - secure - protocol - - - - The secure anycast tunneling protocol (SATP) defines a protocol used for communication between any combination of unicast and anycast tunnel endpoints. It allows tunneling of every ETHER TYPE protocol (ethernet, ip ...). SATP directly includes cryptography and message authentication based on the methods used by the Secure Real-time Transport Protocol(SRTP). It can be used as an encrypted alternative to IP Encapsulation within IP and Generic Routing Encapsulation (GRE). Both anycast receivers and senders are supported. - - - - - -
- - SATP is a mixture of a generic encapsulation protocol like GRE and a secure tunneling protocol as IPsec in tunnel mode. It can be used to build redundant virtual private network (VPN) connections. It supports peer-to-peer tunnels, where tunnel endpoints can be any combination of unicast, multicast or anycast hosts, so it defines a Host Anycast Service. Encryption is done per packet, so the protocol is robust against packet loss and routing changes. -To reduce header overhead, encryption techniques similar to SRTP are being used. - -
- - The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119. - -
-
- -
- - This section gives an overview of possible usage scenarios. Please note that the protocols used in the figures are only examples and that SATP itself does not care about either transport protocols or encapsulated protocols. Routing is not done by SATP and each implemetation MAY choose it's own way of doing this task (e.g. using functions provided by the operating system). SATP is used only to encapsulate and encrypt data. - -
-
-
- An example of SATP used to tunnel in a unicast client - anycast server model - - --------- router ----------- - / \ - unicast ------+---------- router ------------+------ unicast - host \ / host - --------- router ----------- - - unicast | encrypted | anycast | encrypted | unicast - tunnel | communication | tunnel | communication | tunnel - endpoint | using SATP | endpoint | using SATP | endpoint - -
- - In this scenario the payload is encapsuleted into a SATP packet by a unicast host and gets transmitted to one of the anycast routers. After transmisson the packet gets decapsulated by the router. This router makes a routing descision based on the underlying protocol and transmits a new SATP package to one or more unicast hosts depending on this decision. - -
-
-
- An example of SATP used to encrypt data between a unicast host and anycast networks - - -------Router -+---- DNS Server - / \ - / --- 6to4 Router - / - unicast -------+----------Router --+--- DNS Server - host \ \ - \ --- 6to4 Router - \ - -------Router -+---- DNS Server - \ - --- 6to4 Router - - unicast | encrypted | anycast | plaintext - tunnel | communication | tunnel | anycast - endpoint | using SATP | endpoint | services - - -
- - When the unicast hosts wants to transmit data to one of the anycast DNS servers, it encapsulates the data and sends a SATP packet to the anycast address of the routers. The packet arrives at one of the routers, gets decapsulated and is then forwarded to the DNS server. This method can be used to tunnel between clients and networks providing anycast services. It can also be used the other way to virtually locate a unicast service within anycasted networks. - -
-
-
- An example of SATP used to connect 2 networks - - Router ----------- ---------------Router - / \ / \ - Network - Router ------------x Network - A \ / \ / B - Router ----------- ---------------Router - - | packets | packets | packets | - plaintext | get | take a | get | plaintext - packets | de/encrypted | random | de/encrypted | packets - |de/encapsulated| path |de/encapsulated| - - -
- - Network A has multiple routers which act as gateway/tunnel endpoints to another network B. This way a redundant encrypted tunnel connection between the two networks is built up. All tunnel endpoints of network A share the same anycast address and all tunnel endpoints of network B share another anycast address. When a packet from network A is transmitted to network B, it first arrives on one of network A's border routers. Which router is used is determined by network A's internal routing. This router encapsulates the package and sends it to the anycast address of network B's routers. After arrival the SATP packet gets decapsulated and routed to its destination within network B. - -
-
- -
- - SATP does not depend on the lower layer protocol. This section only gives an example of how packets could look like. - -
- Examples of SATP used with different lower layer and payload protocols - - +------+-----+-------------------------------+ - | | | +----------------+-----+ | - | IPv6 | UDP | SATP | Ethernet 802.3 | ... | | - | | | +----------------+-----+ | - +------+-----+-------------------------------+ - -Tunneling of Ethernet over UDP/IPv6 - - +------+-----+---------------------------+ - | | | +------+-----+-----+ | - | IPv4 | UDP | SATP | IPv6 | UDP | RTP | | - | | | +------+-----+-----+ | - +------+-----+---------------------------+ - -Tunneling of IPv6 over UDP/IPv4 with RTP payload - - +------+-------------------------------+ - | | +----------------+-----+ | - | IPv6 | SATP | Ethernet 802.3 | ... | | - | | +----------------+-----+ | - +------+-------------------------------+ - -Tunneling of Ethernet over IPv6 - - +------+---------------------------+ - | | +------+-----+-----+ | - | IPv4 | SATP | IPv6 | UDP | RTP | | - | | +------+-----+-----+ | - +------+---------------------------+ - -Tunneling of IPv6 over IPv4 with RTP payload - -
-
-
- -
-
- - The only way of fully supporting fragmentation would be to synchronise fragments between all anycast servers. This is considered to be too much overhead, so there are two non-perfect solutions for these problems. Either fragmentation HAS TO be disabled or if not all fragments arrive at the same server the IP datagramm HAS TO be discarded. As routing changes are not expected to occur very frequently, the encapsulated protocol can do a retransmission and all fragments will arrive at the new server. - - - If the payload type is IP and the IP headers' Don't Fragment (DF) bit is set, then the DF bit of the outer IP header HAS TO be set as well. - -
-
- - ICMP messages MUST be relayed according to rfc2003 section 4. This is needed for path MTU detection. - -
-
- -
-
-
- Protocol Format - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | sequence number | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | sender ID | MUX | | -+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ | -| | payload type | | | -| +-------------------------------+ | | -| | .... payload ... | | -| | +-------------------------------+ | -| | | padding (OPT) | pad count(OPT)| | -+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+-+ -| : authentication tag (RECOMMENDED) : | -| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | -| | -+- Encrypted Portion Authenticated Portion ---+ - -
- -
-
- - The sequence number is a 32 bit unsigned integer in network byte order. The starting point is signaled by the key exchange mechanism and then value is then increased by 1 for every packet sent. After the maximum value it starts over from 0. - -
-
- - The sender ID is a 16 bit unsigned integer. It HAS TO be unique for every sender sharing the same anycast address. - -
-
- - The MUX (multiplex) field is a 16 bit unsigned integer. It is used to distinguish multiple tunnel connections. - -
-
- - The payload type field defines the payload protocol. ETHER TYPE protocol numbers are used. See IANA assigned ethernet numbers . The values 0000-05DC are reserverd and MUST NOT be used. -
- Some examples for protocol numbers - -HEX -0000 Reserved -.... Reserved -05DC Reserved -0800 Internet IP (IPv4) -6558 transparent ethernet bridging -86DD IPv6 - -
- -
-
- - A packet of type payload type (e.g. an IP packet). - -
-
- - Padding of max 255 octets. None of the pre-defined encryption transforms uses any padding; for these, the plaintext and encrypted payload sizes match exactly. Transforms which may be added in future (see ) MUST define wheter they need padding or not and if they need it they MUST define a proper padding format. If the padding count field is present, the padding count field MUST be set to the padding length. - -
-
- - The number of octets of the padding field. This field is optional. Its presence is signaled by the key management and not by this protocol. If this field isn't present, the padding field MUST NOT be present as well. - -
-
- - The authentication tag is RECOMMENDED and of configurable length. It contains a cryptographic checksum of the sender ID, sequence number and the encrypted portion. On transmitter side encryption HAS TO be done before calculating the authentication tag. A receiver HAS TO calculate the authentication tag before decrypting the encrypted portion. - -
-
- -
- - As mentioned earlier the cryptography of SATP is based on SRTP. For that reason we recommend to read this document as well (especially chapter 7 Rationale). However some modifications were made in order to fit the changed conditions of SATP. The following section describes the whole cryptography of SATP. - -
- - In order to cope with anycast and packet loss it is important to be able to process one packet on its own without the need for packets from the past as an additional information source. Therefore SATP as well as SRTP defines a so called cryptographic context. This context consits of all information which is needed to process a single SATP packet and is divided into packet specific parameters and global parameters. The packet specific parameters can be found in the protocol header and global parameters have to be generated by the key exchange mechanism external to SATP (see ). For anycast sender the global parameters have to be synchronized between all hosts which share the same anycast address. The packet specific parameters MUST NOT be synchronized. -SATP uses two types of keys: master keys and session keys. A session key is meant to be used for a cryptographic transform (encrytion or message authentication) for one packet. The master keys are used to derive packet-specific session keys in a cryptographical secure way. - -
-
- - As mentioned above global parameters HAVE TO either be provided by the key exchange mechanism or configured manually. - - a master key(s) which MUST be random and kept secret. - a master salt which MUST be random and MAY be public (RECOMMENDED to be kept secret as well). - a role specifier used by the key derivation to determine which session keys to generate for outbound or inbound traffic. - identifier for the key derivation pseudo random function. - identifier for the encryption algorithm (i.e. cipher and its mode of operation). - if used an identifier for the authentication algorithm. - transform specific parameters such as key lengths, see . - if used the length of the authentication tag which should be truncated to the packet. - an indicator which specifies if padding is needed or not (presence of padding count field). - a replay list for each sender (see ), maintained by the receiver which contains the sequence numbers of received and authenticated packets, this lists may be implemented as a sliding window. - a [ From , To ] value pair which specifies the lifetime of a master key (including the range endpoints), expressed in terms of a pair of 32-bit sequence numbers. - - -
-
- - - the sequence number - the sender id - the mux value - - -
-
- - A cryptographic contexts SHALL be uniquely identifed by the tuple context identifier: - - context id = [ source address , source port ] - - In order to cope with anycast sender and replay protection there HAS TO be more than one replay list per context. Each replay list inside a cryptographic context SHALL be uniquely identified by the sender id. - - -
-
-
- - Before any SATP packet can be processed a cryptographic context HAS TO be initialized by the key management mechanism. After that a SATP sender SHALL do the following to create a SATP packet: - - Determine the next sequence number to use. - Determine the crypotgraphic context as described in . - Determine the master key and master salt for the packets sequence number. - Compute all session keys and session salts which are needed by the encryption transform using the key derivation pseudo random function. - Encrypt the payload type field concatenated with the payload to produce the encrypted portion of the packet using the encryption algorithm defined by the cryptographic context. - Fill in sender id, mux and sequence number fields. - If needed compute the session authentication key using the key derivation pseudo random function. - Generate the authentication tag over the authenticated portion using the authentication algorithm defined by the cryptographic context and append it to the packet. - - On receiver side the packet SHALL be processed as follows: - - Determine the crypotgraphic context as described in . - Determine the master key and master salt for the packets sequence number. - Check if the packet was replayed using the replay list for the packets sender id. - If needed compute the session authentication key using the key derivation pseudo random function. - Generate the authentication tag over the authenticated portion using the authentication algorithm defined by the crpyptographic context and compare it with the tag appended to the received packet. If it is equal remove the tag and move on. If it is not equal drop the packet. - Store the sequence number in the replay list. - Compute all session keys and session salts which are needed by the encryption transform using the key derivation pseudo random function. - Decrypt the encrypted portion using the encryption algorithm defined by the cryptographic context. - Check if the payload type is supported by this tunnel endpoint and discard the packet in case it isn't supported. - Remove all fields beside the payload itself from the packet. - - -
-
- - Any encryption or message authentication transform which is used (predefined or newly introduced according to ) MUST obtain its secret values (keys and salts) using the SATP key derivation. After the key exchange mechanism has signaled all needed parameters (i.e. master key and salt) no additional communiction between sender and receiver is needed until the next rekeying takes place. To achieve this the key derivation uses an pseudo random function seeded by the master key, master salt, the packets sequence number and a label (identifier for the key to compute). - -
- SATP key derivation - - packet sequence nummber ----+ - | - V - +------------+ master +------------+ - | | key | |--> session encryption key - | ext. key |------->| key | - | management | | |--> session encryption salt - | mechanism |------->| derivation | - | | master | |--> session authentication key - +------------+ salt +------------+ - -
- - SRTP defines a pseudo random function as follows: - Let m and n be positive integers. A pseudo-random function family is a set of keyed functions {PRF_n(k,x)} such that for the (secret) random key k, given m-bit x, PRF_n(k,x) is an n-bit string, computationally indistinguishable from random n-bit strings. - For SATP key generation a pseudo random function with at least m = 128 MUST be used. A predefined transform can be found in . - The input x of the PRF SHOULD be calculated as follows: - - Let key_id = label || sequence_number, with label defined as below. - Let x = key_id XOR master_salt, where key_id and master_salt are aligend so that their least significant bits agree (right-alignment). - - For each key derived by the key derivation there MUST exist a unique label, a 32-bit constant. In order to increase security SATP uses different session keys for inbound and outbound traffic. The role specifier from the cryptographic context is used to determine which session keys to use for inbound and outbound packets. - The labels can be computed by calculateing the SHA1 hash over an increasing label-index. The label value are the 32 leftmost bits of this hash value. - We currently define 6 labels (label-index from 1 to 6) future extensions may use labels with an index from 7 upwards. - - - key type - role - label-index - label - encryption key - left - 1 - 0x356A192B - encryption key - right - 2 - 0xDA4B9237 - encryption salt - left - 3 - 0x77DE68DA - encryption salt - right - 4 - 0x1B645389 - authentication key - left - 5 - 0xAC3478D6 - authentication key - right - 6 - 0xC1DFD96E - - - The role parameter specifies which label should be used for outbound packets. This means a endpoint with role left MUST use the labels marked with left for outgoing packets and expects inbound packets to be encrypted/authenticated using the labels marked with right. - -
-
-
- - While SATP as well as SRTP allows the use of various encryption and message authentication algorithms interoperable implementations MUST support at least the following transforms. To add additional transforms see . - -
-
- - If confidendtiality of the SATP packet is not an issue the null encryption transform can be used to increase performance. This transform just copies the plaintext input into the ciphertext output wihtout any padding. The identifier for that transfrom SHOULD be NULL and it don't needs any transform specific parameters. It also doesn't need any key or salt values computed by the key derivation. - -
-
- - The following describes how to use AES in counter mode for SATP encryption. The identifier for that transform SHOULD be AES-CTR-<key_length> or just AES-CTR in which case the key length defaults to 128 bits. Beside the key length there are no additional transfrom specific parameters. This transform needs a key of length <key_length> and a 112 bit salt. These values can be generated using the key derivation pseudo random function as follows: - session_key = PRF_<key_length>(master_key, x) - session_salt = PRF_112(master_key, x) - with PRF and x defined as in . - Basically AES in counter mode generates a pseudo random keystream seeded by the session key, session salt as well as the sequence number, sender id and mux value of the packet and encrypts a single SATP packet using this stream. The encryption process consits of the generation of that keystream and then bitwise exclusive-oring it onto the packets payload. If the packet length doesn't fit a multiple of 128 bits the remaining bits (least significant) of the keystream are simple ingored. Therefore this transform does not need any padding. Decryption of the packet can be achieved by generating the same keystream and exclusive-oring it onto the encrypted portion. - -
- - In principle AES in counter mode consists of encrypting an incrementing integer. However the starting point of the integer value has to be randomized to get a good pseudo random key stream. A keystream consits of several keystream segements with a size of 128 bits (AES blocksize). Each segement can be computed by applying AES with key k on the block CTR. The whole keystream is a concatination of all its successive segements. Therefore a keystream looks as follows: - AES(session_key, CTR) || AES(session_key, CTR + 1 mod 2^128) || AES(session_key, CTR + 2 mod 2^128) ... - where the 128 bit value CTR is defined as follows: - CTR = (session_salt * 2^16) XOR (mux * 2^80) XOR (sender_id * 2^64) XOR (sequence_number * 2^16) - where each of the four terms are padded with as many leading zeros to form a 128 bit value. - - - Mind that the 16 least siginificant bits of CTR are zero. These bits are used for the counter. Therefore the number of blocks generated for one packet MUST NOT exceed 2^16 to avoid keystream reuse. This means that the packet length MUST NOT exceed 2^16 * 128 bits = 2^23 bits to ensure the security of the encryption. - -
-
-
-
- - It is RECOMMENDED to use an authentication tag and if it is used it should be processed as follows. The sender generates the tag over the authenticated portion truncates it to the left-most (most significant) bits to fit the authentication tag length signaled by the key exchange mechanism. After that it simple appends the tag to the packet. The receiver computes the tag in the same way as the sender and compares if with the received tag. If they don't match the packet HAS TO be discarded and the incident SHOULD be logged. - -
- - This transform uses HMAC-SHA1 (as described in ) as message authentication algorithm. The identifier for the transfrom SHOULD be SHA1 and it don't needs any transform specific parameters. The key should be derived using the key derivation pseudo random function: - session_auth_key = PRF_20(master_key, x) - with PRF and x defined as in - -
-
-
-
- - defines a pseudo random function which SHOULD be used to derive session keys and salts. This describes the use of AES in counter mode as PRF. The identifier for this PRF SHOULD be AES-CTR-<key_length> or just AES-CTR in which case the key length defaults to 128 bits. Beside the key length there are no additional transform specific parameters. This transform needs a master key of length key_length and a 112 bit master salt. The pseudo random string consists of several segements with a size of 128 bits (AES blocksize). The whole string can be computed as follows: - AES(master_key, CTR) || AES(master_key, CTR + 1 mod 2^128) || AES(master_key, CTR + 2 mod 2^128) ... - where the 128 bit value CTR is defined as x * 2^16, with x defined as in . - This pseudo random function can produce pseudo random strings up to a length of 2^23 bits. If the requested output length n does not fit multiples of 128 bits the output SHOULD be truncated to the n first (left-most) bits. Therefore there are n/128, rounded up, applications of AES needed to produce the output string. - -
-
-
-
- - If a new transform is to be added to SATP a standard track RFC MUST be written to define the usage of the new transform. Any overlap between the new RFC and this document SHOULD be avoided but it MAY be needed to update some of the information in this document. For example new parameters MAY be added to the cryptographic context or there MAY be additional steps in SATP packet processing. - -
-
- -
-
- -
- - As the cryptography of SATP is based on SRTP, it basically shares the same security issues. This section will only discuss some small changes. Please read SRTP RFC3711 section 9 for details. - -
- - Replay protection is done by a replay list. Every anycast receiver has its own replay list, which SHOULDN'T be syncronised because of massive overhead. This leads to an additional possible attack. An attacker is able to replay a captured packet once to every anycast receiver. This attack is considered be very unlikely because multiple attack hosts in different locations are needed to reach seperate anycast receivers and the number of replays is limited to count of receivers - 1. Such replays might also happen because of routing problems, so a payload protocol HAS TO be robust against a small number of duplicated packages. The window size and position HAS TO be syncronised between multiple anycast receivers to limit this attack. - -
-
- -
- - The protocol is intended to be used on top of IP or on top of UDP (to be compatible with NAT routers), so UDP and IP protocol numbers have to be assiged by IANA. - -
- - - - &rfc3711; - &rfc2119; - &rfc2003; - &rfc2104; - - - &rfc2784; - &rfc2401; - &rfc1546; - - - diff --git a/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.html b/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.html deleted file mode 100644 index dfffdd7..0000000 --- a/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.html +++ /dev/null @@ -1,687 +0,0 @@ - -secure anycast tunneling protocol (SATP) - - - - - - - -
 TOC 
-
- - - -
Network Working GroupO. Gsenger
Internet-DraftMay 2008
Expires: November 2, 2008 
-


secure anycast tunneling protocol (SATP)
draft-gsenger-secure-anycast-tunneling-protocol-02

- -

Status of this Memo

-

-By submitting this Internet-Draft, -each author represents that any applicable patent or other IPR claims of which -he or she is aware have been or will be disclosed, -and any of which he or she becomes aware will be disclosed, -in accordance with Section 6 of BCP 79.

-

-Internet-Drafts are working documents of the Internet Engineering -Task Force (IETF), its areas, and its working groups. -Note that other groups may also distribute working documents as -Internet-Drafts.

-

-Internet-Drafts are draft documents valid for a maximum of six months -and may be updated, replaced, or obsoleted by other documents at any time. -It is inappropriate to use Internet-Drafts as reference material or to cite -them other than as “work in progress.”

-

-The list of current Internet-Drafts can be accessed at -http://www.ietf.org/ietf/1id-abstracts.txt.

-

-The list of Internet-Draft Shadow Directories can be accessed at -http://www.ietf.org/shadow.html.

-

-This Internet-Draft will expire on November 2, 2008.

- -

Abstract

- -

The secure anycast tunneling protocol (SATP) defines a protocol used for communication between any combination of unicast and anycast tunnel endpoints. It allows tunneling of every ETHER TYPE protocol (ethernet, ip ...). SATP directly includes cryptography and message authentication based on the methods used by the Secure Real-time Transport Protocol(SRTP) (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711]. It can be used as an encrypted alternative to IP Encapsulation within IP (Perkins, C., “IP Encapsulation within IP,” October 1996.) [RFC2003] and Generic Routing Encapsulation (GRE) (Farinacci, D., Li, T., Hanks, S., Meyer, D., and P. Traina, “Generic Routing Encapsulation (GRE),” March 2000.) [RFC2784]. Both anycast receivers and senders are supported. - -


-

Table of Contents

-

-1.  -Introduction
-    1.1.  -Notational Conventions
-2.  -Motivation and usage scenarios
-    2.1.  -Usage scenarions
-        2.1.1.  -Tunneling from unicast hosts over anycast routers to other unicast hosts
-        2.1.2.  -Tunneling from unicast hosts to anycast networks
-        2.1.3.  -Redundant tunnel connection of 2 networks
-    2.2.  -Encapsulation
-3.  -Using SATP on top of IP
-    3.1.  -Fragmentation
-    3.2.  -ICMP messages
-4.  -Protocol specification
-    4.1.  -Header format
-    4.2.  -sequence number
-    4.3.  -sender ID
-    4.4.  -MUX
-    4.5.  -payload type
-    4.6.  -payload
-    4.7.  -padding (OPTIONAL)
-    4.8.  -padding count (OPTIONAL)
-    4.9.  -MKI (OPTIONAL)
-    4.10.  -authentication tag (RECOMMENDED)
-    4.11.  -Encryption
-5.  -Security Considerations
-    5.1.  -Replay protection
-6.  -IANA Considerations
-7.  -References
-    7.1.  -Normative References
-    7.2.  -Informational References
-§  -Author's Address
-§  -Intellectual Property and Copyright Statements
-

-
- -
-
 TOC 
-

1.  -Introduction

- -

SATP is a mixture of a generic encapsulation protocol like GRE (Farinacci, D., Li, T., Hanks, S., Meyer, D., and P. Traina, “Generic Routing Encapsulation (GRE),” March 2000.) [RFC2784] and a secure tunneling protocol as IPsec (Kent, S. and R. Atkinson, “Security Architecture for the Internet Protocol,” November 1998.) [RFC2401] in tunnel mode. It can be used to build redundant virtual private network (VPN) connections. It supports peer-to-peer tunnels, where tunnel endpoints can be any combination of unicast, multicast or anycast hosts, so it defines a Host Anycast Service (Partridge, C., Mendez, T., and W. Milliken, “Host Anycasting Service,” November 1993.) [RFC1546]. Encryption is done per packet, so the protocol is robust against packet loss and routing changes. - To reduce header overhead, encryption techniques of SRTP (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711] are being used. - -

-
-
 TOC 
-

1.1.  -Notational Conventions

- -

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119 (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.) [RFC2119]. -

-
-
 TOC 
-

2.  -Motivation and usage scenarios

- -

This section gives an overview of possible usage scenarios. Please note that the protocols used in the figures are only examples and that SATP itself does not care about either transport protocols or encapsulated protocols. Routing is not done by SATP and each implemetation MAY choose it's own way of doing this task (e.g. using functions provided by the operating system). SATP is used only to encapsulate and encrypt data. -

-
-
 TOC 
-

2.1.  -Usage scenarions

- -
-
 TOC 
-

2.1.1.  -Tunneling from unicast hosts over anycast routers to other unicast hosts

-
- - -

An example of SATP used to tunnel in a unicast client - anycast server model -

-                    --------- router -----------
-                   /                            \
-    unicast ------+---------- router ------------+------ unicast
-    host           \                            /        host
-                    --------- router -----------
-
-  unicast  | encrypted     |  anycast  | encrypted     |  unicast
-  tunnel   | communication |  tunnel   | communication |  tunnel
-  endpoint | using SATP    |  endpoint | using SATP    |  endpoint
-
 Figure 1 
- -

In this scenario the payload is encapsuleted into a SATP packet by a unicast host and gets transmitted to one of the anycast routers. After transmisson the packet gets decapsulated by the router. This router makes a routing descision based on the underlying protocol and transmits a new SATP package to one or more unicast hosts depending on this decision. -

-
-
 TOC 
-

2.1.2.  -Tunneling from unicast hosts to anycast networks

-
- - -

An example of SATP used to encrypt data between a unicast host and anycast networks -

-                       -------Router -+---- DNS Server
-                      /                \
-                     /                  --- 6to4 Router
-                    /
-    unicast -------+----------Router --+--- DNS Server
-    host            \                   \
-                     \                   --- 6to4 Router
-                      \
-                       -------Router -+---- DNS Server
-                                       \
-                                        --- 6to4 Router
-
-  unicast  | encrypted     |  anycast  | plaintext
-  tunnel   | communication |  tunnel   | anycast
-  endpoint | using SATP    |  endpoint | services
-
-
 Figure 2 
- -

When the unicast hosts wants to transmit data to one of the anycast DNS servers, it encapsulates the data and sends a SATP packet to the anycast address of the routers. The packet arrives at one of the routers, gets decapsulated and is then forwarded to the DNS server. This method can be used to tunnel between clients and networks providing anycast services. It can also be used the other way to virtually locate a unicast service within anycasted networks. -

-
-
 TOC 
-

2.1.3.  -Redundant tunnel connection of 2 networks

-
- - -

An example of SATP used to connect 2 networks -

-              Router -----------   ---------------Router
-            /                   \ /                     \
-    Network - Router ------------x                       Network
-       A    \                   / \                     /   B
-              Router -----------   ---------------Router
-
-            | packets       |  packets  |  packets      |
- plaintext  | get           |  take a   |  get          | plaintext
- packets    | de/encrypted  |  random   |  de/encrypted | packets
-            |de/encapsulated|   path    |de/encapsulated|
-
-
 Figure 3 
- -

Network A has multiple routers which act as gateway/tunnel endpoints to another network B. This way a redundant encrypted tunnel connection between the two networks is built up. All tunnel endpoints of network A share the same anycast address and all tunnel endpoints of network B share another anycast address. When a packet from network A is transmitted to network B, it first arrives on one of network A's border routers. Which router is used is determined by network A's internal routing. This router encapsulates the package and sends it to the anycast address of network B's routers. After arrival the SATP packet gets decapsulated and routed to its destination within network B. -

-
-
 TOC 
-

2.2.  -Encapsulation

- -

SATP does not depend on the lower layer protocol. This section only gives an example of how packets could look like. - -


- - -

Examples of SATP used with different lower layer and payload protocols -

-    +------+-----+-------------------------------+
-    |      |     |      +----------------+-----+ |
-    | IPv6 | UDP | SATP | Ethernet 802.3 | ... | |
-    |      |     |      +----------------+-----+ |
-    +------+-----+-------------------------------+
-
-Tunneling of Ethernet over UDP/IPv6
-
-    +------+-----+---------------------------+
-    |      |     |      +------+-----+-----+ |
-    | IPv4 | UDP | SATP | IPv6 | UDP | RTP | |
-    |      |     |      +------+-----+-----+ |
-    +------+-----+---------------------------+
-
-Tunneling of IPv6 over UDP/IPv4 with RTP payload
-
-    +------+-------------------------------+
-    |      |      +----------------+-----+ |
-    | IPv6 | SATP | Ethernet 802.3 | ... | |
-    |      |      +----------------+-----+ |
-    +------+-------------------------------+
-
-Tunneling of Ethernet over IPv6
-
-    +------+---------------------------+
-    |      |      +------+-----+-----+ |
-    | IPv4 | SATP | IPv6 | UDP | RTP | |
-    |      |      +------+-----+-----+ |
-    +------+---------------------------+
-
-Tunneling of IPv6 over IPv4 with RTP payload
-
 Figure 4 
- -
-
 TOC 
-

3.  -Using SATP on top of IP

- -
-
 TOC 
-

3.1.  -Fragmentation

- -

- The only way of fully supporting fragmentation would be to synchronise fragments between all anycast servers. This is considered to be too much overhead, so there are two non-perfect solutions for these problems. Either fragmentation HAS TO be disabled or if not all fragments arrive at the same server the IP datagramm HAS TO be discarded. As routing changes are not expected to occur very frequently, the encapsulated protocol can do a retransmission and all fragments will arrive at the new server. - -

-

If the payload type is IP and the IP headers' Don't Fragment (DF) bit is set, then the DF bit of the outer IP header HAS TO be set as well. -

-
-
 TOC 
-

3.2.  -ICMP messages

- -

ICMP messages MUST be relayed according to rfc2003 section 4 (Perkins, C., “IP Encapsulation within IP,” October 1996.) [RFC2003]. This is needed for path MTU detection. -

-
-
 TOC 
-

4.  -Protocol specification

- -
-
 TOC 
-

4.1.  -Header format

-
- - -

Protocol Format -

-      0                   1                   2                   3
-      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                         sequence number                       | |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
-     |           sender ID           |              MUX              | |
-   +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ |
-   | |         payload type          |                               | |
-   | +-------------------------------+                               | |
-   | |              ....        payload        ...                   | |
-   | |                               +-------------------------------+ |
-   | |                               | padding (OPT) | pad count(OPT)| |
-   +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+-+
-   | ~                          MKI (OPTIONAL)                       ~ |
-   | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
-   | :                 authentication tag (RECOMMENDED)              : |
-   | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
-   |                                                                   |
-   +- Encrypted Portion                       Authenticated Portion ---+
-
 Figure 5 
- -

-

-
-
 TOC 
-

4.2.  -sequence number

- -

The sequence number is a 32 bit unsigned integer in network byte order. It starts with a random value and is increased by 1 for every sent packet. After the maximum value it starts over from 0. This overrun causes the ROC to be increased. -

-
-
 TOC 
-

4.3.  -sender ID

- -

The sender ID is a 16 bit unsigned integer. It HAS TO be unique for every sender sharing the same anycast address. -

-
-
 TOC 
-

4.4.  -MUX

- -

The MUX (multiplex) field is a 16 bit unsigned integer. It is used to distinguish multiple tunnel connections. -

-
-
 TOC 
-

4.5.  -payload type

- -

The payload type field defines the payload protocol. ETHER TYPE protocol numbers are used. See IANA assigned ethernet numbers . The values 0000-05DC are reserverd and MUST NOT be used. -

- - -

Some examples for protocol numbers -

-HEX
-0000 Reserved
-.... Reserved
-05DC Reserved
-0800 Internet IP (IPv4)
-6558 transparent ethernet bridging
-86DD IPv6
-
 Figure 6 
- - - -
-
 TOC 
-

4.6.  -payload

- -

A packet of type payload type (e.g. an IP packet). -

-
-
 TOC 
-

4.7.  -padding (OPTIONAL)

- -

Padding of max 255 octets. -None of the pre-defined encryption transforms uses any padding; for - these, the plaintext and encrypted payload sizes match exactly. Transforms are based on transforms of the SRTP protocol and therefore might use the RTP padding format, so a RTP-like padding is supported. If the padding count field is present, the padding count field MUST be set to the padding length. -

-
-
 TOC 
-

4.8.  -padding count (OPTIONAL)

- -

The number of octets of the padding field. This field is optional. Its presence is signaled by the key management and not by this protocol. If this field isn't present, the padding field MUST NOT be present as well. -

-
-
 TOC 
-

4.9.  -MKI (OPTIONAL)

- -

The MKI (Master Key Identifier) is OPTIONAL and of configurable length. See SRTP Section 3.1 (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711] for details. -

-
-
 TOC 
-

4.10.  -authentication tag (RECOMMENDED)

- -

The authentication tag is RECOMMENDED and of configurable length. It contains a cryptographic checksum of the sender ID, sequence number and the encrypted portion, but not of the MKI. On transmitter side encryption HAS TO be done before calculating the authentication tag. A receiver HAS TO calculate the authentication tag before decrypting the encrypted portion. -

-
-
 TOC 
-

4.11.  -Encryption

- -

Encryption is done in the same way as for SRTP (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711]. This section will only discuss some small changes that HAVE TO be made. Please read SRTP RFC3711 section 3-9 (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711] for details. -

-

The least significant bits of SSRC are replaced by the sender ID and the most significant bits are replaced by the MUX. For the SRTP SEQ the 16 least significant bits of the SATP sequence number are used and the 16 most significant bits of the sequence number replace the 16 least significant bits of the SRTP ROC. -


- - -

Difference between SRTP and SATP -

-      0                   1                   2                   3
-      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                     SATP    sequence number                   |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                                     =
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |  SRTP ROC least significant   |           SRTP SEQ            |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-
-      0                   1                   2                   3
-      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |           SATP  MUX           |       SATP sender ID          |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                                     =
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-     |                           SRTP SSRC                           |
-     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
 Figure 7 
- -
-
 TOC 
-

5.  -Security Considerations

- -

As SATP uses the same encryption techniques as SRTP (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711], it shares the same security issues. This section will only discuss some small changes. Please read SRTP RFC3711 section 9 (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711] for details. -

-
-
 TOC 
-

5.1.  -Replay protection

- -

Replay protection is done by a replay list. Every anycast receiver has its own replay list, which SHOULDN'T be syncronised because of massive overhead. This leads to an additional possible attack. An attacker is able to replay a captured packet once to every anycast receiver. This attack is considered be very unlikely because multiple attack hosts in different locations are needed to reach seperate anycast receivers and the number of replays is limited to count of receivers - 1. Such replays might also happen because of routing problems, so a payload protocol HAS TO be robust against a small number of duplicated packages. The window size and position HAS TO be syncronised between multiple anycast receivers to limit this attack. -

-
-
 TOC 
-

6.  -IANA Considerations

- -

The protocol is intended to be used on top of IP or on top of UDP (to be compatible with NAT routers), so UDP and IP protocol numbers have to be assiged by IANA. -

-
-
 TOC 
-

7.  -References

- -
-
 TOC 
-

7.1. Normative References

- - - - - - - -
[RFC3711]Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” RFC 3711, March 2004 (TXT).
[RFC2119]Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC2003]Perkins, C., “IP Encapsulation within IP,” RFC 2003, October 1996 (TXT, HTML, XML).
- -
-
 TOC 
-

7.2. Informational References

- - - - - - - -
[RFC2784]Farinacci, D., Li, T., Hanks, S., Meyer, D., and P. Traina, “Generic Routing Encapsulation (GRE),” RFC 2784, March 2000 (TXT).
[RFC2401]Kent, S. and R. Atkinson, “Security Architecture for the Internet Protocol,” RFC 2401, November 1998 (TXT, HTML, XML).
[RFC1546]Partridge, C., Mendez, T., and W. Milliken, “Host Anycasting Service,” RFC 1546, November 1993 (TXT).
- -
-
 TOC 
-

Author's Address

- - - - - - - - - - - - - - - -
 Othmar Gsenger
 Puerstingerstr 32
 Saalfelden 5760
 AT
Phone: 
Email: satp@gsenger.com
URI: http://www.gsenger.com/satp/
-
-
 TOC 
-

Full Copyright Statement

-

-Copyright © The IETF Trust (2008).

-

-This document is subject to the rights, -licenses and restrictions contained in BCP 78, -and except as set forth therein, -the authors retain all their rights.

-

-This document and the information contained herein are provided -on an “AS IS” basis and THE CONTRIBUTOR, -THE ORGANIZATION HE/SHE REPRESENTS -OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST -AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, -EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT -THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY -IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -PURPOSE.

-

Intellectual Property

-

-The IETF takes no position regarding the validity or scope of any -Intellectual Property Rights or other rights that might be claimed -to pertain to the implementation or use of the technology -described in this document or the extent to which any license -under such rights might or might not be available; nor does it -represent that it has made any independent effort to identify any -such rights. -Information on the procedures with respect to -rights in RFC documents can be found in BCP 78 and BCP 79.

-

-Copies of IPR disclosures made to the IETF Secretariat and any -assurances of licenses to be made available, -or the result of an attempt made to obtain a general license or -permission for the use of such proprietary rights by implementers or -users of this specification can be obtained from the IETF on-line IPR -repository at http://www.ietf.org/ipr.

-

-The IETF invites any interested party to bring to its attention -any copyrights, -patents or patent applications, -or other -proprietary rights that may cover technology that may be required -to implement this standard. -Please address the information to the IETF at ietf-ipr@ietf.org.

- diff --git a/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.txt b/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.txt deleted file mode 100644 index 257ca7d..0000000 --- a/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.txt +++ /dev/null @@ -1,952 +0,0 @@ - - - -Network Working Group O. Gsenger -Internet-Draft May 2008 -Expires: November 2, 2008 - - - secure anycast tunneling protocol (SATP) - draft-gsenger-secure-anycast-tunneling-protocol-02 - -Status of this Memo - - By submitting this Internet-Draft, each author represents that any - applicable patent or other IPR claims of which he or she is aware - have been or will be disclosed, and any of which he or she becomes - aware will be disclosed, in accordance with Section 6 of BCP 79. - - Internet-Drafts are working documents of the Internet Engineering - Task Force (IETF), its areas, and its working groups. Note that - other groups may also distribute working documents as Internet- - Drafts. - - Internet-Drafts are draft documents valid for a maximum of six months - and may be updated, replaced, or obsoleted by other documents at any - time. It is inappropriate to use Internet-Drafts as reference - material or to cite them other than as "work in progress." - - The list of current Internet-Drafts can be accessed at - http://www.ietf.org/ietf/1id-abstracts.txt. - - The list of Internet-Draft Shadow Directories can be accessed at - http://www.ietf.org/shadow.html. - - This Internet-Draft will expire on November 2, 2008. - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 1] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -Abstract - - The secure anycast tunneling protocol (SATP) defines a protocol used - for communication between any combination of unicast and anycast - tunnel endpoints. It allows tunneling of every ETHER TYPE protocol - (ethernet, ip ...). SATP directly includes cryptography and message - authentication based on the methods used by the Secure Real-time - Transport Protocol(SRTP) [RFC3711]. It can be used as an encrypted - alternative to IP Encapsulation within IP [RFC2003] and Generic - Routing Encapsulation (GRE) [RFC2784]. Both anycast receivers and - senders are supported. - - -Table of Contents - - 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1.1. Notational Conventions . . . . . . . . . . . . . . . . . . 3 - 2. Motivation and usage scenarios . . . . . . . . . . . . . . . . 4 - 2.1. Usage scenarions . . . . . . . . . . . . . . . . . . . . . 4 - 2.1.1. Tunneling from unicast hosts over anycast routers - to other unicast hosts . . . . . . . . . . . . . . . . 4 - 2.1.2. Tunneling from unicast hosts to anycast networks . . . 5 - 2.1.3. Redundant tunnel connection of 2 networks . . . . . . 5 - 2.2. Encapsulation . . . . . . . . . . . . . . . . . . . . . . 6 - 3. Using SATP on top of IP . . . . . . . . . . . . . . . . . . . 8 - 3.1. Fragmentation . . . . . . . . . . . . . . . . . . . . . . 8 - 3.2. ICMP messages . . . . . . . . . . . . . . . . . . . . . . 8 - 4. Protocol specification . . . . . . . . . . . . . . . . . . . . 9 - 4.1. Header format . . . . . . . . . . . . . . . . . . . . . . 9 - 4.2. sequence number . . . . . . . . . . . . . . . . . . . . . 9 - 4.3. sender ID . . . . . . . . . . . . . . . . . . . . . . . . 9 - 4.4. MUX . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 4.5. payload type . . . . . . . . . . . . . . . . . . . . . . . 10 - 4.6. payload . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 4.7. padding (OPTIONAL) . . . . . . . . . . . . . . . . . . . . 10 - 4.8. padding count (OPTIONAL) . . . . . . . . . . . . . . . . . 10 - 4.9. MKI (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . 10 - 4.10. authentication tag (RECOMMENDED) . . . . . . . . . . . . . 10 - 4.11. Encryption . . . . . . . . . . . . . . . . . . . . . . . . 11 - 5. Security Considerations . . . . . . . . . . . . . . . . . . . 12 - 5.1. Replay protection . . . . . . . . . . . . . . . . . . . . 12 - 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13 - 7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 7.1. Normative References . . . . . . . . . . . . . . . . . . . 14 - 7.2. Informational References . . . . . . . . . . . . . . . . . 14 - Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 16 - Intellectual Property and Copyright Statements . . . . . . . . . . 17 - - - - -Gsenger Expires November 2, 2008 [Page 2] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -1. Introduction - - SATP is a mixture of a generic encapsulation protocol like GRE - [RFC2784] and a secure tunneling protocol as IPsec [RFC2401] in - tunnel mode. It can be used to build redundant virtual private - network (VPN) connections. It supports peer-to-peer tunnels, where - tunnel endpoints can be any combination of unicast, multicast or - anycast hosts, so it defines a Host Anycast Service [RFC1546]. - Encryption is done per packet, so the protocol is robust against - packet loss and routing changes. To reduce header overhead, - encryption techniques of SRTP [RFC3711] are being used. - -1.1. Notational Conventions - - The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", - "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this - document are to be interpreted as described in RFC2119 [RFC2119]. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 3] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -2. Motivation and usage scenarios - - This section gives an overview of possible usage scenarios. Please - note that the protocols used in the figures are only examples and - that SATP itself does not care about either transport protocols or - encapsulated protocols. Routing is not done by SATP and each - implemetation MAY choose it's own way of doing this task (e.g. using - functions provided by the operating system). SATP is used only to - encapsulate and encrypt data. - -2.1. Usage scenarions - -2.1.1. Tunneling from unicast hosts over anycast routers to other - unicast hosts - - An example of SATP used to tunnel in a unicast client - anycast - server model - - --------- router ----------- - / \ - unicast ------+---------- router ------------+------ unicast - host \ / host - --------- router ----------- - - unicast | encrypted | anycast | encrypted | unicast - tunnel | communication | tunnel | communication | tunnel - endpoint | using SATP | endpoint | using SATP | endpoint - - Figure 1 - - In this scenario the payload is encapsuleted into a SATP packet by a - unicast host and gets transmitted to one of the anycast routers. - After transmisson the packet gets decapsulated by the router. This - router makes a routing descision based on the underlying protocol and - transmits a new SATP package to one or more unicast hosts depending - on this decision. - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 4] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -2.1.2. Tunneling from unicast hosts to anycast networks - - An example of SATP used to encrypt data between a unicast host and - anycast networks - - -------Router -+---- DNS Server - / \ - / --- 6to4 Router - / - unicast -------+----------Router --+--- DNS Server - host \ \ - \ --- 6to4 Router - \ - -------Router -+---- DNS Server - \ - --- 6to4 Router - - unicast | encrypted | anycast | plaintext - tunnel | communication | tunnel | anycast - endpoint | using SATP | endpoint | services - - - Figure 2 - - When the unicast hosts wants to transmit data to one of the anycast - DNS servers, it encapsulates the data and sends a SATP packet to the - anycast address of the routers. The packet arrives at one of the - routers, gets decapsulated and is then forwarded to the DNS server. - This method can be used to tunnel between clients and networks - providing anycast services. It can also be used the other way to - virtually locate a unicast service within anycasted networks. - -2.1.3. Redundant tunnel connection of 2 networks - - An example of SATP used to connect 2 networks - - Router ----------- ---------------Router - / \ / \ - Network - Router ------------x Network - A \ / \ / B - Router ----------- ---------------Router - - | packets | packets | packets | - plaintext | get | take a | get | plaintext - packets | de/encrypted | random | de/encrypted | packets - |de/encapsulated| path |de/encapsulated| - - - - - -Gsenger Expires November 2, 2008 [Page 5] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - - Figure 3 - - Network A has multiple routers which act as gateway/tunnel endpoints - to another network B. This way a redundant encrypted tunnel - connection between the two networks is built up. All tunnel - endpoints of network A share the same anycast address and all tunnel - endpoints of network B share another anycast address. When a packet - from network A is transmitted to network B, it first arrives on one - of network A's border routers. Which router is used is determined by - network A's internal routing. This router encapsulates the package - and sends it to the anycast address of network B's routers. After - arrival the SATP packet gets decapsulated and routed to its - destination within network B. - -2.2. Encapsulation - - SATP does not depend on the lower layer protocol. This section only - gives an example of how packets could look like. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 6] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - - Examples of SATP used with different lower layer and payload - protocols - - +------+-----+-------------------------------+ - | | | +----------------+-----+ | - | IPv6 | UDP | SATP | Ethernet 802.3 | ... | | - | | | +----------------+-----+ | - +------+-----+-------------------------------+ - - Tunneling of Ethernet over UDP/IPv6 - - +------+-----+---------------------------+ - | | | +------+-----+-----+ | - | IPv4 | UDP | SATP | IPv6 | UDP | RTP | | - | | | +------+-----+-----+ | - +------+-----+---------------------------+ - - Tunneling of IPv6 over UDP/IPv4 with RTP payload - - +------+-------------------------------+ - | | +----------------+-----+ | - | IPv6 | SATP | Ethernet 802.3 | ... | | - | | +----------------+-----+ | - +------+-------------------------------+ - - Tunneling of Ethernet over IPv6 - - +------+---------------------------+ - | | +------+-----+-----+ | - | IPv4 | SATP | IPv6 | UDP | RTP | | - | | +------+-----+-----+ | - +------+---------------------------+ - - Tunneling of IPv6 over IPv4 with RTP payload - - Figure 4 - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 7] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -3. Using SATP on top of IP - -3.1. Fragmentation - - The only way of fully supporting fragmentation would be to - synchronise fragments between all anycast servers. This is - considered to be too much overhead, so there are two non-perfect - solutions for these problems. Either fragmentation HAS TO be - disabled or if not all fragments arrive at the same server the IP - datagramm HAS TO be discarded. As routing changes are not expected - to occur very frequently, the encapsulated protocol can do a - retransmission and all fragments will arrive at the new server. - - If the payload type is IP and the IP headers' Don't Fragment (DF) bit - is set, then the DF bit of the outer IP header HAS TO be set as well. - -3.2. ICMP messages - - ICMP messages MUST be relayed according to rfc2003 section 4 - [RFC2003]. This is needed for path MTU detection. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 8] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -4. Protocol specification - -4.1. Header format - - Protocol Format - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | sequence number | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | sender ID | MUX | | - +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ | - | | payload type | | | - | +-------------------------------+ | | - | | .... payload ... | | - | | +-------------------------------+ | - | | | padding (OPT) | pad count(OPT)| | - +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+-+ - | ~ MKI (OPTIONAL) ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | : authentication tag (RECOMMENDED) : | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | | - +- Encrypted Portion Authenticated Portion ---+ - - Figure 5 - -4.2. sequence number - - The sequence number is a 32 bit unsigned integer in network byte - order. It starts with a random value and is increased by 1 for every - sent packet. After the maximum value it starts over from 0. This - overrun causes the ROC to be increased. - -4.3. sender ID - - The sender ID is a 16 bit unsigned integer. It HAS TO be unique for - every sender sharing the same anycast address. - -4.4. MUX - - The MUX (multiplex) field is a 16 bit unsigned integer. It is used - to distinguish multiple tunnel connections. - - - - - - - -Gsenger Expires November 2, 2008 [Page 9] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -4.5. payload type - - The payload type field defines the payload protocol. ETHER TYPE - protocol numbers are used. See IANA assigned ethernet numbers [1] . - The values 0000-05DC are reserverd and MUST NOT be used. - - Some examples for protocol numbers - - HEX - 0000 Reserved - .... Reserved - 05DC Reserved - 0800 Internet IP (IPv4) - 6558 transparent ethernet bridging - 86DD IPv6 - - Figure 6 - -4.6. payload - - A packet of type payload type (e.g. an IP packet). - -4.7. padding (OPTIONAL) - - Padding of max 255 octets. None of the pre-defined encryption - transforms uses any padding; for these, the plaintext and encrypted - payload sizes match exactly. Transforms are based on transforms of - the SRTP protocol and therefore might use the RTP padding format, so - a RTP-like padding is supported. If the padding count field is - present, the padding count field MUST be set to the padding length. - -4.8. padding count (OPTIONAL) - - The number of octets of the padding field. This field is optional. - Its presence is signaled by the key management and not by this - protocol. If this field isn't present, the padding field MUST NOT be - present as well. - -4.9. MKI (OPTIONAL) - - The MKI (Master Key Identifier) is OPTIONAL and of configurable - length. See SRTP Section 3.1 [RFC3711] for details. - -4.10. authentication tag (RECOMMENDED) - - The authentication tag is RECOMMENDED and of configurable length. It - contains a cryptographic checksum of the sender ID, sequence number - and the encrypted portion, but not of the MKI. On transmitter side - - - -Gsenger Expires November 2, 2008 [Page 10] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - - encryption HAS TO be done before calculating the authentication tag. - A receiver HAS TO calculate the authentication tag before decrypting - the encrypted portion. - -4.11. Encryption - - Encryption is done in the same way as for SRTP [RFC3711]. This - section will only discuss some small changes that HAVE TO be made. - Please read SRTP RFC3711 section 3-9 [RFC3711] for details. - - The least significant bits of SSRC are replaced by the sender ID and - the most significant bits are replaced by the MUX. For the SRTP SEQ - the 16 least significant bits of the SATP sequence number are used - and the 16 most significant bits of the sequence number replace the - 16 least significant bits of the SRTP ROC. - - Difference between SRTP and SATP - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SATP sequence number | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - = - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SRTP ROC least significant | SRTP SEQ | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SATP MUX | SATP sender ID | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - = - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SRTP SSRC | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - - Figure 7 - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 11] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -5. Security Considerations - - As SATP uses the same encryption techniques as SRTP [RFC3711], it - shares the same security issues. This section will only discuss some - small changes. Please read SRTP RFC3711 section 9 [RFC3711] for - details. - -5.1. Replay protection - - Replay protection is done by a replay list. Every anycast receiver - has its own replay list, which SHOULDN'T be syncronised because of - massive overhead. This leads to an additional possible attack. An - attacker is able to replay a captured packet once to every anycast - receiver. This attack is considered be very unlikely because - multiple attack hosts in different locations are needed to reach - seperate anycast receivers and the number of replays is limited to - count of receivers - 1. Such replays might also happen because of - routing problems, so a payload protocol HAS TO be robust against a - small number of duplicated packages. The window size and position - HAS TO be syncronised between multiple anycast receivers to limit - this attack. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 12] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -6. IANA Considerations - - The protocol is intended to be used on top of IP or on top of UDP (to - be compatible with NAT routers), so UDP and IP protocol numbers have - to be assiged by IANA. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 13] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -7. References - -7.1. Normative References - - [RFC3711] Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. - Norrman, "The Secure Real-time Transport Protocol (SRTP)", - RFC 3711, March 2004. - - [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate - Requirement Levels", BCP 14, RFC 2119, March 1997. - - [RFC2003] Perkins, C., "IP Encapsulation within IP", RFC 2003, - October 1996. - -7.2. Informational References - - [RFC2784] Farinacci, D., Li, T., Hanks, S., Meyer, D., and P. - Traina, "Generic Routing Encapsulation (GRE)", RFC 2784, - March 2000. - - [RFC2401] Kent, S. and R. Atkinson, "Security Architecture for the - Internet Protocol", RFC 2401, November 1998. - - [RFC1546] Partridge, C., Mendez, T., and W. Milliken, "Host - Anycasting Service", RFC 1546, November 1993. - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 14] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -URIs - - [1] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 15] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -Author's Address - - Othmar Gsenger - Puerstingerstr 32 - Saalfelden 5760 - AT - - Phone: - Email: satp@gsenger.com - URI: http://www.gsenger.com/satp/ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 16] - -Internet-Draft secure anycast tunneling protocol (SATP) May 2008 - - -Full Copyright Statement - - Copyright (C) The IETF Trust (2008). - - This document is subject to the rights, licenses and restrictions - contained in BCP 78, and except as set forth therein, the authors - retain all their rights. - - This document and the information contained herein are provided on an - "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS - OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND - THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF - THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED - WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. - - -Intellectual Property - - The IETF takes no position regarding the validity or scope of any - Intellectual Property Rights or other rights that might be claimed to - pertain to the implementation or use of the technology described in - this document or the extent to which any license under such rights - might or might not be available; nor does it represent that it has - made any independent effort to identify any such rights. Information - on the procedures with respect to rights in RFC documents can be - found in BCP 78 and BCP 79. - - Copies of IPR disclosures made to the IETF Secretariat and any - assurances of licenses to be made available, or the result of an - attempt made to obtain a general license or permission for the use of - such proprietary rights by implementers or users of this - specification can be obtained from the IETF on-line IPR repository at - http://www.ietf.org/ipr. - - The IETF invites any interested party to bring to its attention any - copyrights, patents or patent applications, or other proprietary - rights that may cover technology that may be required to implement - this standard. Please address the information to the IETF at - ietf-ipr@ietf.org. - - - - - - - - - - - -Gsenger Expires November 2, 2008 [Page 17] - diff --git a/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.xml b/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.xml deleted file mode 100644 index 78f3414..0000000 --- a/papers/draft-gsenger-secure-anycast-tunneling-protocol-02.xml +++ /dev/null @@ -1,299 +0,0 @@ - - - - - - - - -]> - - - - secure anycast tunneling protocol (SATP) - - - - -
- - Puerstingerstr 32 - Saalfelden - 5760 - AT - - - - satp@gsenger.com - http://www.gsenger.com/satp/ -
- - - - - General - - satp - Internet-Draft - secure anycast tunneling protocol - anycast - tunnel - secure - protocol - - The secure anycast tunneling protocol (SATP) defines a protocol used for communication between any combination of unicast and anycast tunnel endpoints. It allows tunneling of every ETHER TYPE protocol (ethernet, ip ...). SATP directly includes cryptography and message authentication based on the methods used by the Secure Real-time Transport Protocol(SRTP). It can be used as an encrypted alternative to IP Encapsulation within IP and Generic Routing Encapsulation (GRE). Both anycast receivers and senders are supported. - - - - -
- SATP is a mixture of a generic encapsulation protocol like GRE and a secure tunneling protocol as IPsec in tunnel mode. It can be used to build redundant virtual private network (VPN) connections. It supports peer-to-peer tunnels, where tunnel endpoints can be any combination of unicast, multicast or anycast hosts, so it defines a Host Anycast Service. Encryption is done per packet, so the protocol is robust against packet loss and routing changes. - To reduce header overhead, encryption techniques of SRTP are being used. - -
- The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119. -
-
-
- This section gives an overview of possible usage scenarios. Please note that the protocols used in the figures are only examples and that SATP itself does not care about either transport protocols or encapsulated protocols. Routing is not done by SATP and each implemetation MAY choose it's own way of doing this task (e.g. using functions provided by the operating system). SATP is used only to encapsulate and encrypt data. -
- -
-
- An example of SATP used to tunnel in a unicast client - anycast server model - - --------- router ----------- - / \ - unicast ------+---------- router ------------+------ unicast - host \ / host - --------- router ----------- - - unicast | encrypted | anycast | encrypted | unicast - tunnel | communication | tunnel | communication | tunnel - endpoint | using SATP | endpoint | using SATP | endpoint - -
- In this scenario the payload is encapsuleted into a SATP packet by a unicast host and gets transmitted to one of the anycast routers. After transmisson the packet gets decapsulated by the router. This router makes a routing descision based on the underlying protocol and transmits a new SATP package to one or more unicast hosts depending on this decision. -
- -
-
- An example of SATP used to encrypt data between a unicast host and anycast networks - - -------Router -+---- DNS Server - / \ - / --- 6to4 Router - / - unicast -------+----------Router --+--- DNS Server - host \ \ - \ --- 6to4 Router - \ - -------Router -+---- DNS Server - \ - --- 6to4 Router - - unicast | encrypted | anycast | plaintext - tunnel | communication | tunnel | anycast - endpoint | using SATP | endpoint | services - - -
- When the unicast hosts wants to transmit data to one of the anycast DNS servers, it encapsulates the data and sends a SATP packet to the anycast address of the routers. The packet arrives at one of the routers, gets decapsulated and is then forwarded to the DNS server. This method can be used to tunnel between clients and networks providing anycast services. It can also be used the other way to virtually locate a unicast service within anycasted networks. -
-
-
- An example of SATP used to connect 2 networks - - Router ----------- ---------------Router - / \ / \ - Network - Router ------------x Network - A \ / \ / B - Router ----------- ---------------Router - - | packets | packets | packets | - plaintext | get | take a | get | plaintext - packets | de/encrypted | random | de/encrypted | packets - |de/encapsulated| path |de/encapsulated| - - -
- - Network A has multiple routers which act as gateway/tunnel endpoints to another network B. This way a redundant encrypted tunnel connection between the two networks is built up. All tunnel endpoints of network A share the same anycast address and all tunnel endpoints of network B share another anycast address. When a packet from network A is transmitted to network B, it first arrives on one of network A's border routers. Which router is used is determined by network A's internal routing. This router encapsulates the package and sends it to the anycast address of network B's routers. After arrival the SATP packet gets decapsulated and routed to its destination within network B. -
-
-
- SATP does not depend on the lower layer protocol. This section only gives an example of how packets could look like. - -
- Examples of SATP used with different lower layer and payload protocols - - +------+-----+-------------------------------+ - | | | +----------------+-----+ | - | IPv6 | UDP | SATP | Ethernet 802.3 | ... | | - | | | +----------------+-----+ | - +------+-----+-------------------------------+ - -Tunneling of Ethernet over UDP/IPv6 - - +------+-----+---------------------------+ - | | | +------+-----+-----+ | - | IPv4 | UDP | SATP | IPv6 | UDP | RTP | | - | | | +------+-----+-----+ | - +------+-----+---------------------------+ - -Tunneling of IPv6 over UDP/IPv4 with RTP payload - - +------+-------------------------------+ - | | +----------------+-----+ | - | IPv6 | SATP | Ethernet 802.3 | ... | | - | | +----------------+-----+ | - +------+-------------------------------+ - -Tunneling of Ethernet over IPv6 - - +------+---------------------------+ - | | +------+-----+-----+ | - | IPv4 | SATP | IPv6 | UDP | RTP | | - | | +------+-----+-----+ | - +------+---------------------------+ - -Tunneling of IPv6 over IPv4 with RTP payload - -
-
-
-
-
- - The only way of fully supporting fragmentation would be to synchronise fragments between all anycast servers. This is considered to be too much overhead, so there are two non-perfect solutions for these problems. Either fragmentation HAS TO be disabled or if not all fragments arrive at the same server the IP datagramm HAS TO be discarded. As routing changes are not expected to occur very frequently, the encapsulated protocol can do a retransmission and all fragments will arrive at the new server. - If the payload type is IP and the IP headers' Don't Fragment (DF) bit is set, then the DF bit of the outer IP header HAS TO be set as well. -
-
- ICMP messages MUST be relayed according to rfc2003 section 4. This is needed for path MTU detection. -
-
-
-
-
- Protocol Format - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | sequence number | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | sender ID | MUX | | - +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+ | - | | payload type | | | - | +-------------------------------+ | | - | | .... payload ... | | - | | +-------------------------------+ | - | | | padding (OPT) | pad count(OPT)| | - +#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+-+ - | ~ MKI (OPTIONAL) ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | : authentication tag (RECOMMENDED) : | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | | - +- Encrypted Portion Authenticated Portion ---+ - -
- -
-
- The sequence number is a 32 bit unsigned integer in network byte order. It starts with a random value and is increased by 1 for every sent packet. After the maximum value it starts over from 0. This overrun causes the ROC to be increased. -
-
- The sender ID is a 16 bit unsigned integer. It HAS TO be unique for every sender sharing the same anycast address. -
-
- The MUX (multiplex) field is a 16 bit unsigned integer. It is used to distinguish multiple tunnel connections. -
-
- The payload type field defines the payload protocol. ETHER TYPE protocol numbers are used. See IANA assigned ethernet numbers . The values 0000-05DC are reserverd and MUST NOT be used. -
- Some examples for protocol numbers - -HEX -0000 Reserved -.... Reserved -05DC Reserved -0800 Internet IP (IPv4) -6558 transparent ethernet bridging -86DD IPv6 - -
- -
-
- A packet of type payload type (e.g. an IP packet). -
-
- Padding of max 255 octets. -None of the pre-defined encryption transforms uses any padding; for - these, the plaintext and encrypted payload sizes match exactly. Transforms are based on transforms of the SRTP protocol and therefore might use the RTP padding format, so a RTP-like padding is supported. If the padding count field is present, the padding count field MUST be set to the padding length. -
-
- The number of octets of the padding field. This field is optional. Its presence is signaled by the key management and not by this protocol. If this field isn't present, the padding field MUST NOT be present as well. -
-
- The MKI (Master Key Identifier) is OPTIONAL and of configurable length. See SRTP Section 3.1 for details. -
-
- The authentication tag is RECOMMENDED and of configurable length. It contains a cryptographic checksum of the sender ID, sequence number and the encrypted portion, but not of the MKI. On transmitter side encryption HAS TO be done before calculating the authentication tag. A receiver HAS TO calculate the authentication tag before decrypting the encrypted portion. -
-
- Encryption is done in the same way as for SRTP. This section will only discuss some small changes that HAVE TO be made. Please read SRTP RFC3711 section 3-9 for details. The least significant bits of SSRC are replaced by the sender ID and the most significant bits are replaced by the MUX. For the SRTP SEQ the 16 least significant bits of the SATP sequence number are used and the 16 most significant bits of the sequence number replace the 16 least significant bits of the SRTP ROC. -
- Difference between SRTP and SATP - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SATP sequence number | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - = - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SRTP ROC least significant | SRTP SEQ | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SATP MUX | SATP sender ID | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - = - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | SRTP SSRC | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - -
-
-
-
- As SATP uses the same encryption techniques as SRTP, it shares the same security issues. This section will only discuss some small changes. Please read SRTP RFC3711 section 9 for details. -
- Replay protection is done by a replay list. Every anycast receiver has its own replay list, which SHOULDN'T be syncronised because of massive overhead. This leads to an additional possible attack. An attacker is able to replay a captured packet once to every anycast receiver. This attack is considered be very unlikely because multiple attack hosts in different locations are needed to reach seperate anycast receivers and the number of replays is limited to count of receivers - 1. Such replays might also happen because of routing problems, so a payload protocol HAS TO be robust against a small number of duplicated packages. The window size and position HAS TO be syncronised between multiple anycast receivers to limit this attack. -
-
-
- The protocol is intended to be used on top of IP or on top of UDP (to be compatible with NAT routers), so UDP and IP protocol numbers have to be assiged by IANA. -
- - - - &rfc3711; - &rfc2119; - &rfc2003; - - - &rfc2784; - &rfc2401; - &rfc1546; - - - diff --git a/papers/linuxtage2008.odp b/papers/linuxtage2008.odp deleted file mode 100644 index b712dbd..0000000 Binary files a/papers/linuxtage2008.odp and /dev/null differ diff --git a/papers/realraum.odp b/papers/realraum.odp deleted file mode 100644 index 7f41608..0000000 Binary files a/papers/realraum.odp and /dev/null differ diff --git a/papers/titelseite_anycast_und_kryptographie.odt b/papers/titelseite_anycast_und_kryptographie.odt deleted file mode 100644 index c69a7b9..0000000 Binary files a/papers/titelseite_anycast_und_kryptographie.odt and /dev/null differ diff --git a/papers/vortrag b/papers/vortrag deleted file mode 100644 index aa6f2cf..0000000 --- a/papers/vortrag +++ /dev/null @@ -1,21 +0,0 @@ - -Title: Anycast services and routing - -Subtitle: How to build highly redundant and scaleable internet services with anycast - -Abstract: - -The talk will give an overview on internet routing and anycast ip addressing. We'll show how anycast can be used to build scaleable and redundant network services and to protect against deny of service attacks. - -description: - -Anycast like unicast or multicast is a special form of addressing on the internet. Two or more hosts share the same IP address, but only one of them gets the IP packets. Wich host recieves packages is usally determined by the routing protocol, so this might theoretically change after every packet. - -This adds many nice features, as it is possible to hot add and remove anycast hosts without reconfiguring any client using their services. When one anycast host fails, all it's traffic gets rerouted within seconds. So usally clients don't even recognise a server failure. Load balancing between the anycast hosts is automatically done by the routing protocol. So load balancing is based on best routing metric, which means the host with shortest path to the client is used. This leads to an optimal load balancing that serves all clients with minimum delay. - -Not every protocol can be used with anycast. Today mainly stateless protocols are used as anycast host services. However it is also possible to run more complex protocols between anycast and unicast hosts. The talk will discuss the design issues when building anycast host services. The secure anycast tunneling protocol (satp), will be presented as an example for a new anycast protocol. It allows to send encrypted data between any combination of unicast and anycast hosts. This may be used to build redundandt VPN clusters, but is also possible to use the protocol to build new services. On basis of a VOIP media relay a complex anycast design will be presented. - -On the internet a client cannot determine the difference between a normal multihomed IP address or an anycast IP address. Routing is done by BGP4. BGP bla.... Fine tuning, load banancing, failover whatever - - - -- cgit v1.2.3