From 71da41451212389bea25d67bc5da696b6d194bff Mon Sep 17 00:00:00 2001
From: Othmar Gsenger <otti@anytun.org>
Date: Sun, 25 May 2008 09:50:42 +0000
Subject: moved keyexchange to http://anytun.org/svn/keyexchange

---
 .../samples/VPN-3way-template.conf                 | 116 ---------------------
 1 file changed, 116 deletions(-)
 delete mode 100644 keyexchange/isakmpd-20041012/samples/VPN-3way-template.conf

(limited to 'keyexchange/isakmpd-20041012/samples/VPN-3way-template.conf')

diff --git a/keyexchange/isakmpd-20041012/samples/VPN-3way-template.conf b/keyexchange/isakmpd-20041012/samples/VPN-3way-template.conf
deleted file mode 100644
index b64c801..0000000
--- a/keyexchange/isakmpd-20041012/samples/VPN-3way-template.conf
+++ /dev/null
@@ -1,116 +0,0 @@
-#	$OpenBSD: VPN-3way-template.conf,v 1.11 2004/02/11 08:55:22 jmc Exp $
-#	$EOM: VPN-3way-template.conf,v 1.8 2000/10/09 22:08:30 angelos Exp $
-#
-# A configuration sample for the isakmpd ISAKMP/Oakley (aka IKE) daemon.
-#
-# This is a template file of a VPN setup between three nodes in
-# a fully meshed 'three-way' configuration. Suggested use is to copy
-# this file to all three nodes and then edit them accordingly.
-#
-# These nodes are initially called XXX, YYY and ZZZ.
-#
-# In pseudographics:   XXX --- YYY
-#                         \   /
-#                          ZZZ
-#
-# In cases where IP/network addresses should be defined values like
-# 192.168.XXX.nnn have been used.
-#
-
-# Incoming phase 1 negotiations are multiplexed on the source IP
-# address. In the three-way VPN, we have two possible peers.
-
-[Phase 1]
-192.168.YYY.nnn=	ISAKMP-peer-node-YYY
-192.168.ZZZ.nnn=	ISAKMP-peer-node-ZZZ
-
-# These connections are walked over after config file parsing and
-# told to the application layer so that it will inform us when
-# traffic wants to pass over them.  This means we can do on-demand
-# keying. In the three-way VPN, each node knows two connections.
-
-[Phase 2]
-Connections=		IPsec-Conn-XXX-YYY,IPsec-Conn-XXX-ZZZ
-
-# ISAKMP Phase 1 peer sections
-##############################
-
-[ISAKMP-peer-node-YYY]
-Phase=			1
-Transport=		udp
-Address=		192.168.YYY.nnn
-Configuration=		Default-main-mode
-Authentication=		yoursharedsecretwithYYY
-
-[ISAKMP-peer-node-ZZZ]
-Phase=			1
-Transport=		udp
-Address=		192.168.ZZZ.nnn
-Configuration=		Default-main-mode
-Authentication=		yoursharedsecretwithZZZ
-
-# IPsec Phase 2 sections
-########################
-
-[IPsec-Conn-XXX-YYY]
-Phase=			2
-ISAKMP-peer=		ISAKMP-peer-node-YYY
-Configuration=		Default-quick-mode
-Local-ID=		MyNet-XXX
-Remote-ID=		OtherNet-YYY
-
-[IPsec-Conn-XXX-ZZZ]
-Phase=			2
-ISAKMP-peer=		ISAKMP-peer-node-ZZZ
-Configuration=		Default-quick-mode
-Local-ID=		MyNet-XXX
-Remote-ID=		OtherNet-ZZZ
-
-# Client ID sections
-####################
-
-[MyNet-XXX]
-ID-type=		IPV4_ADDR_SUBNET
-Network=		192.168.XXX.0
-Netmask=		255.255.255.0
-
-[OtherNet-YYY]
-ID-type=		IPV4_ADDR_SUBNET
-Network=		192.168.YYY.0
-Netmask=		255.255.255.0
-
-[OtherNet-ZZZ]
-ID-type=		IPV4_ADDR_SUBNET
-Network=		192.168.ZZZ.0
-Netmask=		255.255.255.0
-
-#
-# There is no more node-specific configuration below this point.
-#
-
-# Main mode descriptions
-
-[Default-main-mode]
-DOI=			IPSEC
-EXCHANGE_TYPE=		ID_PROT
-Transforms=		3DES-SHA,3DES-MD5
-
-[Blowfish-main-mode]
-DOI=			IPSEC
-EXCHANGE_TYPE=		ID_PROT
-Transforms=		BLF-SHA-M1024
-
-# Quick mode description
-########################
-
-[Default-quick-mode]
-DOI=			IPSEC
-EXCHANGE_TYPE=		QUICK_MODE
-Suites=			QM-ESP-AES-SHA-PFS-SUITE
-
-[Blowfish-quick-mode]
-DOI=			IPSEC
-EXCHANGE_TYPE=		QUICK_MODE
-Suites=			QM-ESP-BLF-SHA-PFS-SUITE
-#Suites=			QM-ESP-BLF-SHA-SUITE
-
-- 
cgit v1.2.3