From a525c9c7412fb9483dd868b3504cd1be32dc7d23 Mon Sep 17 00:00:00 2001 From: Christian Pointner Date: Tue, 22 Dec 2009 20:18:51 +0000 Subject: added manpage to svn (and later to release tarball) moved manpages to doc directory --- doc/anytun-config.8.txt | 173 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 doc/anytun-config.8.txt (limited to 'doc/anytun-config.8.txt') diff --git a/doc/anytun-config.8.txt b/doc/anytun-config.8.txt new file mode 100644 index 0000000..6a80b4d --- /dev/null +++ b/doc/anytun-config.8.txt @@ -0,0 +1,173 @@ +anytun-config(8) +================ + +NAME +---- +anytun-config - anycast tunneling configuration utility + +SYNOPSIS +-------- + +.... +anytun-config + [ -h|--help ] + [ -L|--log :[,[,[..]]] + [ -r|--remote-host ] + [ -o|--remote-port ] + [ -4|--ipv4-only ] + [ -6|--ipv6-only ] + [ -R|--route / ] + [ -m|--mux ] + [ -w|--window-size ] + [ -k|--kd-prf ] + [ -e|--role ] + [ -E|--passphrase ] + [ -K|--key ] + [ -A|--salt ] +.... + +DESCRIPTION +----------- + +*anytun-config* writes routing/connection table entries, that can be read by *anytun-controld*. + +OPTIONS +------- + +*-L, --log :[,[,[..]]]*:: + add log target to logging system. This can be invoked several times + in order to log to different targets at the same time. Every target + hast its own log level which is a number between 0 and 5. Where 0 means + disabling log and 5 means debug messages are enabled. + + The file target can be used more the once with different levels. + If no target is provided at the command line a single target with the + config *syslog:3,anytun-config,daemon* is added. + + The following targets are supported: + + *syslog*;; log to syslog daemon, parameters [,[,]] + *file*;; log to file, parameters [,] + *stdout*;; log to standard output, parameters + *stderr*;; log to standard error, parameters + +*-r, --remote-host *:: + This option can be used to specify the remote tunnel + endpoint. In case of anycast tunnel endpoints, the + anycast IP address has to be used. If you do not specify + an address, it is automatically determined after receiving + the first data packet. + +*-o, --remote-port *:: + The UDP port used for payload data by the remote host + (specified with -p on the remote host). If you do not specify + a port, it is automatically determined after receiving + the first data packet. + +*-4, --ipv4-only*:: + Resolv to IPv4 addresses only. The default is to resolv both + IPv4 and IPv6 addresses. + +*-6, --ipv6-only*:: + Resolv to IPv6 addresses only. The default is to resolv both + IPv4 and IPv6 addresses. + +*-R, --route /*:: + add a route to connection. This can be invoked several times. + +*-m, --mux *:: + the multiplex id to use. default: 0 + +*-w, --window-size *:: + seqence window size + + Sometimes, packets arrive out of order on the receiver + side. This option defines the size of a list of received + packets' sequence numbers. If, according to this list, + a received packet has been previously received or has + been transmitted in the past, and is therefore not in + the list anymore, this is interpreted as a replay attack + and the packet is dropped. A value of 0 deactivates this + list and, as a consequence, the replay protection employed + by filtering packets according to their secuence number. + By default the sequence window is disabled and therefore a + window size of 0 is used. + +*-k, --kd--prf *:: + key derivation pseudo random function + + The pseudo random function which is used for calculating the + session keys and session salt. + + Possible values: + + *null*;; no random function, keys and salt are set to 0..00 + *aes-ctr*;; AES in counter mode with 128 Bits, default value + *aes-ctr-128*;; AES in counter mode with 128 Bits + *aes-ctr-192*;; AES in counter mode with 192 Bits + *aes-ctr-256*;; AES in counter mode with 256 Bits + +*-e, --role *:: + SATP uses different session keys for inbound and outbound traffic. The + role parameter is used to determine which keys to use for outbound or + inbound packets. On both sides of a vpn connection different roles have + to be used. Possible values are *left* and *right*. You may also use + *alice* or *server* as a replacement for *left* and *bob* or *client* as + a replacement for *right*. By default *left* is used. + +*-E, --passphrase *:: + This passphrase is used to generate the master key and master salt. + For the master key the last n bits of the SHA256 digest of the + passphrase (where n is the length of the master key in bits) is used. + The master salt gets generated with the SHA1 digest. + You may force a specific key and or salt by using *--key* and *--salt*. + +*-K, --key *:: + master key to use for key derivation + + Master key in hexadecimal notation, e.g. + 01a2b3c4d5e6f708a9b0cadbecfd0fa1, with a mandatory length + of 32, 48 or 64 characters (128, 192 or 256 bits). + +*-A, --salt *:: + master salt to use for key derivation + + Master salt in hexadecimal notation, e.g. + 01a2b3c4d5e6f708a9b0cadbecfd, with a mandatory length + of 28 characters (14 bytes). + + +EXAMPLES +-------- + +Add a client with Connection ID (Mux) 12 and add 2 Routes to this client + +------------------------------------------------------------------------------------------------ +# anytun-config -w 0 -m 12 -K 0123456789ABCDEFFEDCBA9876543210 -A 0123456789ABCDDCBA9876543210 \ + -R 192.0.2.0/24 -R 192.168.1.1/32 -e server >> routingtable +------------------------------------------------------------------------------------------------ + +BUGS +---- +Most likely there are some bugs in *Anytun*. If you find a bug, please let +the developers know at satp@anytun.org. Of course, patches are preferred. + +SEE ALSO +-------- +anytun(8), anytun-controld(8), anytun-showtables(8) + +AUTHORS +------- + +Othmar Gsenger +Erwin Nindl +Christian Pointner + + +RESOURCES +--------- + +Main web site: http://www.anytun.org/ + + +COPYING +------- + +Copyright \(C) 2007-2009 Othmar Gsenger, Erwin Nindl and Christian +Pointner. This program is free software: you can redistribute it +and/or modify it under the terms of the GNU General Public License +as published by the Free Software Foundation, either version 3 of +the License, or any later version. -- cgit v1.2.3