summaryrefslogtreecommitdiff
path: root/ssltools/easy-rsa/2.0
diff options
context:
space:
mode:
Diffstat (limited to 'ssltools/easy-rsa/2.0')
-rw-r--r--ssltools/easy-rsa/2.0/Makefile13
-rw-r--r--ssltools/easy-rsa/2.0/README.gzbin0 -> 3578 bytes
-rwxr-xr-xssltools/easy-rsa/2.0/build-ca8
-rwxr-xr-xssltools/easy-rsa/2.0/build-dh11
-rwxr-xr-xssltools/easy-rsa/2.0/build-inter7
-rwxr-xr-xssltools/easy-rsa/2.0/build-key7
-rwxr-xr-xssltools/easy-rsa/2.0/build-key-pass7
-rwxr-xr-xssltools/easy-rsa/2.0/build-key-pkcs128
-rwxr-xr-xssltools/easy-rsa/2.0/build-key-server10
-rwxr-xr-xssltools/easy-rsa/2.0/build-req7
-rwxr-xr-xssltools/easy-rsa/2.0/build-req-pass7
-rwxr-xr-xssltools/easy-rsa/2.0/clean-all16
-rwxr-xr-xssltools/easy-rsa/2.0/inherit-inter39
-rwxr-xr-xssltools/easy-rsa/2.0/list-crl13
-rw-r--r--ssltools/easy-rsa/2.0/openssl-0.9.6.cnf.gzbin0 -> 2994 bytes
-rwxr-xr-xssltools/easy-rsa/2.0/openssl.cnf285
-rwxr-xr-xssltools/easy-rsa/2.0/pkitool353
-rwxr-xr-xssltools/easy-rsa/2.0/revoke-full39
-rwxr-xr-xssltools/easy-rsa/2.0/sign-req7
-rwxr-xr-xssltools/easy-rsa/2.0/vars64
-rwxr-xr-xssltools/easy-rsa/2.0/whichopensslcnf13
21 files changed, 914 insertions, 0 deletions
diff --git a/ssltools/easy-rsa/2.0/Makefile b/ssltools/easy-rsa/2.0/Makefile
new file mode 100644
index 0000000..902d78f
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/Makefile
@@ -0,0 +1,13 @@
+
+DESTDIR=
+PREFIX=
+
+all:
+ echo "All done."
+ echo "Run make install DESTDIR=/usr/share/somewhere"
+
+install:
+ install -c --directory "${DESTDIR}/${PREFIX}"
+ install -c --mode=0755 build-* "${DESTDIR}/${PREFIX}"
+ install -c --mode=0755 clean-all list-crl inherit-inter pkitool revoke-full sign-req whichopensslcnf "${DESTDIR}/${PREFIX}"
+ install -c --mode=0644 openssl-0.9.6.cnf openssl.cnf README vars "${DESTDIR}/${PREFIX}"
diff --git a/ssltools/easy-rsa/2.0/README.gz b/ssltools/easy-rsa/2.0/README.gz
new file mode 100644
index 0000000..116d85b
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/README.gz
Binary files differ
diff --git a/ssltools/easy-rsa/2.0/build-ca b/ssltools/easy-rsa/2.0/build-ca
new file mode 100755
index 0000000..fb1e2ca
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-ca
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+#
+# Build a root certificate
+#
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --initca $*
diff --git a/ssltools/easy-rsa/2.0/build-dh b/ssltools/easy-rsa/2.0/build-dh
new file mode 100755
index 0000000..f019222
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-dh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Build Diffie-Hellman parameters for the server side
+# of an SSL/TLS connection.
+
+if [ -d $KEY_DIR ] && [ $KEY_SIZE ]; then
+ $OPENSSL dhparam -out ${KEY_DIR}/dh${KEY_SIZE}.pem ${KEY_SIZE}
+else
+ echo 'Please source the vars script first (i.e. "source ./vars")'
+ echo 'Make sure you have edited it to reflect your configuration.'
+fi
diff --git a/ssltools/easy-rsa/2.0/build-inter b/ssltools/easy-rsa/2.0/build-inter
new file mode 100755
index 0000000..f831d6f
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-inter
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Make an intermediate CA certificate/private key pair using a locally generated
+# root certificate.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --inter $*
diff --git a/ssltools/easy-rsa/2.0/build-key b/ssltools/easy-rsa/2.0/build-key
new file mode 100755
index 0000000..6196308
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-key
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Make a certificate/private key pair using a locally generated
+# root certificate.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact $*
diff --git a/ssltools/easy-rsa/2.0/build-key-pass b/ssltools/easy-rsa/2.0/build-key-pass
new file mode 100755
index 0000000..35543e0
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-key-pass
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Similar to build-key, but protect the private key
+# with a password.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --pass $*
diff --git a/ssltools/easy-rsa/2.0/build-key-pkcs12 b/ssltools/easy-rsa/2.0/build-key-pkcs12
new file mode 100755
index 0000000..5ef064f
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-key-pkcs12
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+# Make a certificate/private key pair using a locally generated
+# root certificate and convert it to a PKCS #12 file including the
+# the CA certificate as well.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --pkcs12 $*
diff --git a/ssltools/easy-rsa/2.0/build-key-server b/ssltools/easy-rsa/2.0/build-key-server
new file mode 100755
index 0000000..5502675
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-key-server
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Make a certificate/private key pair using a locally generated
+# root certificate.
+#
+# Explicitly set nsCertType to server using the "server"
+# extension in the openssl.cnf file.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --server $*
diff --git a/ssltools/easy-rsa/2.0/build-req b/ssltools/easy-rsa/2.0/build-req
new file mode 100755
index 0000000..26587d1
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-req
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Build a certificate signing request and private key. Use this
+# when your root certificate and key is not available locally.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --csr $*
diff --git a/ssltools/easy-rsa/2.0/build-req-pass b/ssltools/easy-rsa/2.0/build-req-pass
new file mode 100755
index 0000000..6e6c863
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/build-req-pass
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Like build-req, but protect your private key
+# with a password.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --csr --pass $*
diff --git a/ssltools/easy-rsa/2.0/clean-all b/ssltools/easy-rsa/2.0/clean-all
new file mode 100755
index 0000000..0576db5
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/clean-all
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+# Initialize the $KEY_DIR directory.
+# Note that this script does a
+# rm -rf on $KEY_DIR so be careful!
+
+if [ "$KEY_DIR" ]; then
+ rm -rf "$KEY_DIR"
+ mkdir "$KEY_DIR" && \
+ chmod go-rwx "$KEY_DIR" && \
+ touch "$KEY_DIR/index.txt" && \
+ echo 01 >"$KEY_DIR/serial"
+else
+ echo 'Please source the vars script first (i.e. "source ./vars")'
+ echo 'Make sure you have edited it to reflect your configuration.'
+fi
diff --git a/ssltools/easy-rsa/2.0/inherit-inter b/ssltools/easy-rsa/2.0/inherit-inter
new file mode 100755
index 0000000..2101951
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/inherit-inter
@@ -0,0 +1,39 @@
+#!/bin/bash
+
+# Build a new PKI which is rooted on an intermediate certificate generated
+# by ./build-inter or ./pkitool --inter from a parent PKI. The new PKI should
+# have independent vars settings, and must use a different KEY_DIR directory
+# from the parent. This tool can be used to generate arbitrary depth
+# certificate chains.
+#
+# To build an intermediate CA, follow the same steps for a regular PKI but
+# replace ./build-key or ./pkitool --initca with this script.
+
+# The EXPORT_CA file will contain the CA certificate chain and should be
+# referenced by the OpenVPN "ca" directive in config files. The ca.crt file
+# will only contain the local intermediate CA -- it's needed by the easy-rsa
+# scripts but not by OpenVPN directly.
+EXPORT_CA="export-ca.crt"
+
+if [ $# -ne 2 ]; then
+ echo "usage: $0 <parent-key-dir> <common-name>"
+ echo "parent-key-dir: the KEY_DIR directory of the parent PKI"
+ echo "common-name: the common name of the intermediate certificate in the parent PKI"
+ exit 1;
+fi
+
+if [ "$KEY_DIR" ]; then
+ cp "$1/$2.crt" "$KEY_DIR/ca.crt"
+ cp "$1/$2.key" "$KEY_DIR/ca.key"
+
+ if [ -e "$1/$EXPORT_CA" ]; then
+ PARENT_CA="$1/$EXPORT_CA"
+ else
+ PARENT_CA="$1/ca.crt"
+ fi
+ cp "$PARENT_CA" "$KEY_DIR/$EXPORT_CA"
+ cat "$KEY_DIR/ca.crt" >> "$KEY_DIR/$EXPORT_CA"
+else
+ echo 'Please source the vars script first (i.e. "source ./vars")'
+ echo 'Make sure you have edited it to reflect your configuration.'
+fi
diff --git a/ssltools/easy-rsa/2.0/list-crl b/ssltools/easy-rsa/2.0/list-crl
new file mode 100755
index 0000000..afc0cd6
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/list-crl
@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# list revoked certificates
+
+CRL="${1:-crl.pem}"
+
+if [ "$KEY_DIR" ]; then
+ cd "$KEY_DIR" && \
+ $OPENSSL crl -text -noout -in "$CRL"
+else
+ echo 'Please source the vars script first (i.e. "source ./vars")'
+ echo 'Make sure you have edited it to reflect your configuration.'
+fi
diff --git a/ssltools/easy-rsa/2.0/openssl-0.9.6.cnf.gz b/ssltools/easy-rsa/2.0/openssl-0.9.6.cnf.gz
new file mode 100644
index 0000000..d2afde0
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/openssl-0.9.6.cnf.gz
Binary files differ
diff --git a/ssltools/easy-rsa/2.0/openssl.cnf b/ssltools/easy-rsa/2.0/openssl.cnf
new file mode 100755
index 0000000..a781dda
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/openssl.cnf
@@ -0,0 +1,285 @@
+# For use with easy-rsa version 2.0
+
+#
+# OpenSSL example configuration file.
+# This is mostly being used for generation of certificate requests.
+#
+
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME = .
+RANDFILE = $ENV::HOME/.rnd
+openssl_conf = openssl_init
+
+[ openssl_init ]
+# Extra OBJECT IDENTIFIER info:
+#oid_file = $ENV::HOME/.oid
+oid_section = new_oids
+engines = engine_section
+
+# To use this configuration file with the "-extfile" option of the
+# "openssl x509" utility, name here the section containing the
+# X.509v3 extensions to use:
+# extensions =
+# (Alternatively, use a configuration file that has only
+# X.509v3 extensions in its main [= default] section.)
+
+[ new_oids ]
+
+# We can add new OIDs in here for use by 'ca' and 'req'.
+# Add a simple OID like this:
+# testoid1=1.2.3.4
+# Or use config file substitution like this:
+# testoid2=${testoid1}.5.6
+
+####################################################################
+[ ca ]
+default_ca = CA_default # The default ca section
+
+####################################################################
+[ CA_default ]
+
+dir = $ENV::KEY_DIR # Where everything is kept
+certs = $dir # Where the issued certs are kept
+crl_dir = $dir # Where the issued crl are kept
+database = $dir/index.txt # database index file.
+new_certs_dir = $dir # default place for new certs.
+
+certificate = $dir/ca.crt # The CA certificate
+serial = $dir/serial # The current serial number
+crl = $dir/crl.pem # The current CRL
+private_key = $dir/ca.key # The private key
+RANDFILE = $dir/.rand # private random number file
+
+x509_extensions = usr_cert # The extentions to add to the cert
+
+# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
+# so this is commented out by default to leave a V1 CRL.
+# crl_extensions = crl_ext
+
+default_days = 3650 # how long to certify for
+default_crl_days= 30 # how long before next CRL
+default_md = md5 # which md to use.
+preserve = no # keep passed DN ordering
+
+# A few difference way of specifying how similar the request should look
+# For type CA, the listed attributes must be the same, and the optional
+# and supplied fields are just that :-)
+policy = policy_anything
+
+# For the CA policy
+[ policy_match ]
+countryName = match
+stateOrProvinceName = match
+organizationName = match
+organizationalUnitName = optional
+commonName = supplied
+emailAddress = optional
+
+# For the 'anything' policy
+# At this point in time, you must list all acceptable 'object'
+# types.
+[ policy_anything ]
+countryName = optional
+stateOrProvinceName = optional
+localityName = optional
+organizationName = optional
+organizationalUnitName = optional
+commonName = supplied
+emailAddress = optional
+
+####################################################################
+[ req ]
+default_bits = $ENV::KEY_SIZE
+default_keyfile = privkey.pem
+distinguished_name = req_distinguished_name
+attributes = req_attributes
+x509_extensions = v3_ca # The extentions to add to the self signed cert
+
+# Passwords for private keys if not present they will be prompted for
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options.
+# default: PrintableString, T61String, BMPString.
+# pkix : PrintableString, BMPString.
+# utf8only: only UTF8Strings.
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# MASK:XXXX a literal mask value.
+# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
+# so use this option with caution!
+string_mask = nombstr
+
+# req_extensions = v3_req # The extensions to add to a certificate request
+
+[ req_distinguished_name ]
+countryName = Country Name (2 letter code)
+countryName_default = $ENV::KEY_COUNTRY
+countryName_min = 2
+countryName_max = 2
+
+stateOrProvinceName = State or Province Name (full name)
+stateOrProvinceName_default = $ENV::KEY_PROVINCE
+
+localityName = Locality Name (eg, city)
+localityName_default = $ENV::KEY_CITY
+
+0.organizationName = Organization Name (eg, company)
+0.organizationName_default = $ENV::KEY_ORG
+
+# we can do this but it is not needed normally :-)
+#1.organizationName = Second Organization Name (eg, company)
+#1.organizationName_default = World Wide Web Pty Ltd
+
+organizationalUnitName = Organizational Unit Name (eg, section)
+#organizationalUnitName_default =
+
+commonName = Common Name (eg, your name or your server\'s hostname)
+commonName_max = 64
+
+emailAddress = Email Address
+emailAddress_default = $ENV::KEY_EMAIL
+emailAddress_max = 40
+
+# JY -- added for batch mode
+organizationalUnitName_default = $ENV::KEY_OU
+commonName_default = $ENV::KEY_CN
+
+# SET-ex3 = SET extension number 3
+
+[ req_attributes ]
+challengePassword = A challenge password
+challengePassword_min = 4
+challengePassword_max = 20
+
+unstructuredName = An optional company name
+
+[ usr_cert ]
+
+# These extensions are added when 'ca' signs a request.
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType = server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment = "Easy-RSA Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer:always
+extendedKeyUsage=clientAuth
+keyUsage = digitalSignature
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl = http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+[ server ]
+
+# JY ADDED -- Make a cert with nsCertType set to "server"
+basicConstraints=CA:FALSE
+nsCertType = server
+nsComment = "Easy-RSA Generated Server Certificate"
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer:always
+extendedKeyUsage=serverAuth
+keyUsage = digitalSignature, keyEncipherment
+
+[ v3_req ]
+
+# Extensions to add to a certificate request
+
+basicConstraints = CA:FALSE
+keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+[ v3_ca ]
+
+
+# Extensions for a typical CA
+
+
+# PKIX recommendation.
+
+subjectKeyIdentifier=hash
+
+authorityKeyIdentifier=keyid:always,issuer:always
+
+# This is what PKIX recommends but some broken software chokes on critical
+# extensions.
+#basicConstraints = critical,CA:true
+# So we do this instead.
+basicConstraints = CA:true
+
+# Key usage: this is typical for a CA certificate. However since it will
+# prevent it being used as an test self-signed certificate it is best
+# left out by default.
+# keyUsage = cRLSign, keyCertSign
+
+# Some might want this also
+# nsCertType = sslCA, emailCA
+
+# Include email address in subject alt name: another PKIX recommendation
+# subjectAltName=email:copy
+# Copy issuer details
+# issuerAltName=issuer:copy
+
+# DER hex encoding of an extension: beware experts only!
+# obj=DER:02:03
+# Where 'obj' is a standard or added object
+# You can even override a supported extension:
+# basicConstraints= critical, DER:30:03:01:01:FF
+
+[ crl_ext ]
+
+# CRL extensions.
+# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
+
+# issuerAltName=issuer:copy
+authorityKeyIdentifier=keyid:always,issuer:always
+
+[ engine_section ]
+#
+# If you are using PKCS#11
+# Install engine_pkcs11 of opensc (www.opensc.org)
+# And uncomment the following
+# verify that dynamic_path points to the correct location
+#
+#pkcs11 = pkcs11_section
+
+[ pkcs11_section ]
+engine_id = pkcs11
+dynamic_path = /usr/lib/engines/engine_pkcs11.so
+MODULE_PATH = $ENV::PKCS11_MODULE_PATH
+PIN = $ENV::PKCS11_PIN
+init = 0
+
diff --git a/ssltools/easy-rsa/2.0/pkitool b/ssltools/easy-rsa/2.0/pkitool
new file mode 100755
index 0000000..5f95162
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/pkitool
@@ -0,0 +1,353 @@
+#!/bin/sh
+
+# OpenVPN -- An application to securely tunnel IP networks
+# over a single TCP/UDP port, with support for SSL/TLS-based
+# session authentication and key exchange,
+# packet encryption, packet authentication, and
+# packet compression.
+#
+# Copyright (C) 2002-2005 OpenVPN Solutions LLC <info@openvpn.net>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program (see the file COPYING included with this
+# distribution); if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+# pkitool is a front-end for the openssl tool.
+
+# Calling scripts can set the certificate organizational
+# unit with the KEY_OU environmental variable.
+
+PROGNAME=pkitool
+VERSION=2.0
+DEBUG=0
+
+die()
+{
+ local m="$1"
+
+ echo "$m" >&2
+ exit 1
+}
+
+need_vars()
+{
+ echo ' Please edit the vars script to reflect your configuration,'
+ echo ' then source it with "source ./vars".'
+ echo ' Next, to start with a fresh PKI configuration and to delete any'
+ echo ' previous certificates and keys, run "./clean-all".'
+ echo " Finally, you can run this tool ($PROGNAME) to build certificates/keys."
+}
+
+usage()
+{
+ echo "$PROGNAME $VERSION"
+ echo "Usage: $PROGNAME [options...] [common-name]"
+ echo "Options:"
+ echo " --batch : batch mode (default)"
+ echo " --keysize : Set keysize"
+ echo " size : size (default=1024)"
+ echo " --interact : interactive mode"
+ echo " --server : build server cert"
+ echo " --initca : build root CA"
+ echo " --inter : build intermediate CA"
+ echo " --pass : encrypt private key with password"
+ echo " --csr : only generate a CSR, do not sign"
+ echo " --sign : sign an existing CSR"
+ echo " --pkcs12 : generate a combined PKCS#12 file"
+ echo " --pkcs11 : generate certificate on PKCS#11 token"
+ echo " lib : PKCS#11 library"
+ echo " slot : PKCS#11 slot"
+ echo " id : PKCS#11 object id (hex string)"
+ echo " label : PKCS#11 object label"
+ echo "Standalone options:"
+ echo " --pkcs11-slots : list PKCS#11 slots"
+ echo " lib : PKCS#11 library"
+ echo " --pkcs11-objects : list PKCS#11 token objects"
+ echo " lib : PKCS#11 library"
+ echo " slot : PKCS#11 slot"
+ echo " --pkcs11-init : initialize PKCS#11 token DANGEROUS!!!"
+ echo " lib : PKCS#11 library"
+ echo " slot : PKCS#11 slot"
+ echo " label : PKCS#11 token label"
+ echo "Notes:"
+ need_vars
+ echo " In order to use PKCS#11 interface you must have opensc-0.10.0 or higher."
+ echo "Generated files and corresponding OpenVPN directives:"
+ echo '(Files will be placed in the $KEY_DIR directory, defined in ./vars)'
+ echo " ca.crt -> root certificate (--ca)"
+ echo " ca.key -> root key, keep secure (not directly used by OpenVPN)"
+ echo " .crt files -> client/server certificates (--cert)"
+ echo " .key files -> private keys, keep secure (--key)"
+ echo " .csr files -> certificate signing request (not directly used by OpenVPN)"
+ echo " dh1024.pem or dh2048.pem -> Diffie Hellman parameters (--dh)"
+ echo "Examples:"
+ echo " $PROGNAME --initca -> Build root certificate"
+ echo " $PROGNAME --initca --pass -> Build root certificate with password-protected key"
+ echo " $PROGNAME --server server1 -> Build \"server1\" certificate/key"
+ echo " $PROGNAME client1 -> Build \"client1\" certificate/key"
+ echo " $PROGNAME --pass client2 -> Build password-protected \"client2\" certificate/key"
+ echo " $PROGNAME --pkcs12 client3 -> Build \"client3\" certificate/key in PKCS#12 format"
+ echo " $PROGNAME --csr client4 -> Build \"client4\" CSR to be signed by another CA"
+ echo " $PROGNAME --sign client4 -> Sign \"client4\" CSR"
+ echo " $PROGNAME --inter interca -> Build an intermediate key-signing certificate/key"
+ echo " Also see ./inherit-inter script."
+ echo " $PROGNAME --pkcs11 /usr/lib/pkcs11/lib1 0 010203 \"client5 id\" client5"
+ echo " -> Build \"client5\" certificate/key in PKCS#11 token"
+ echo "Typical usage for initial PKI setup. Build myserver, client1, and client2 cert/keys."
+ echo "Protect client2 key with a password. Build DH parms. Generated files in ./keys :"
+ echo " [edit vars with your site-specific info]"
+ echo " source ./vars"
+ echo " ./clean-all"
+ echo " ./build-dh -> takes a long time, consider backgrounding"
+ echo " ./$PROGNAME --initca"
+ echo " ./$PROGNAME --server myserver"
+ echo " ./$PROGNAME client1"
+ echo " ./$PROGNAME --pass client2"
+ echo "Typical usage for adding client cert to existing PKI:"
+ echo " source ./vars"
+ echo " ./$PROGNAME client-new"
+}
+
+# Set defaults
+DO_REQ="1"
+REQ_EXT=""
+DO_CA="1"
+CA_EXT=""
+DO_P12="0"
+DO_P11="0"
+DO_ROOT="0"
+NODES_REQ="-nodes"
+NODES_P12=""
+BATCH="-batch"
+CA="ca"
+# must be set or errors of openssl.cnf
+PKCS11_MODULE_PATH="dummy"
+PKCS11_PIN="dummy"
+
+# Process options
+while [ $# -gt 0 ]; do
+ case "$1" in
+ --keysize ) KEY_SIZE=$2
+ shift;;
+ --server ) REQ_EXT="$REQ_EXT -extensions server"
+ CA_EXT="$CA_EXT -extensions server" ;;
+ --batch ) BATCH="-batch" ;;
+ --interact ) BATCH="" ;;
+ --inter ) CA_EXT="$CA_EXT -extensions v3_ca" ;;
+ --initca ) DO_ROOT="1" ;;
+ --pass ) NODES_REQ="" ;;
+ --csr ) DO_CA="0" ;;
+ --sign ) DO_REQ="0" ;;
+ --pkcs12 ) DO_P12="1" ;;
+ --pkcs11 ) DO_P11="1"
+ PKCS11_MODULE_PATH="$2"
+ PKCS11_SLOT="$3"
+ PKCS11_ID="$4"
+ PKCS11_LABEL="$5"
+ shift 4;;
+
+ # standalone
+ --pkcs11-init)
+ PKCS11_MODULE_PATH="$2"
+ PKCS11_SLOT="$3"
+ PKCS11_LABEL="$4"
+ if [ -z "$PKCS11_LABEL" ]; then
+ die "Please specify library name, slot and label"
+ fi
+ $PKCS11TOOL --module "$PKCS11_MODULE_PATH" --init-token --slot "$PKCS11_SLOT" \
+ --label "$PKCS11_LABEL" &&
+ $PKCS11TOOL --module "$PKCS11_MODULE_PATH" --init-pin --slot "$PKCS11_SLOT"
+ exit $?;;
+ --pkcs11-slots)
+ PKCS11_MODULE_PATH="$2"
+ if [ -z "$PKCS11_MODULE_PATH" ]; then
+ die "Please specify library name"
+ fi
+ $PKCS11TOOL --module "$PKCS11_MODULE_PATH" --list-slots
+ exit 0;;
+ --pkcs11-objects)
+ PKCS11_MODULE_PATH="$2"
+ PKCS11_SLOT="$3"
+ if [ -z "$PKCS11_SLOT" ]; then
+ die "Please specify library name and slot"
+ fi
+ $PKCS11TOOL --module "$PKCS11_MODULE_PATH" --list-objects --login --slot "$PKCS11_SLOT"
+ exit 0;;
+
+ # errors
+ --* ) die "$PROGNAME: unknown option: $1" ;;
+ * ) break ;;
+ esac
+ shift
+done
+
+if ! [ -z "$BATCH" ]; then
+ if $OPENSSL version | grep 0.9.6 > /dev/null; then
+ die "Batch mode is unsupported in openssl<0.9.7"
+ fi
+fi
+
+if [ $DO_P12 -eq 1 -a $DO_P11 -eq 1 ]; then
+ die "PKCS#11 and PKCS#12 cannot be specified together"
+fi
+
+if [ $DO_P11 -eq 1 ]; then
+ if ! grep "^pkcs11.*=" "$KEY_CONFIG" > /dev/null; then
+ die "Please edit $KEY_CONFIG and setup PKCS#11 engine"
+ fi
+fi
+
+# If we are generating pkcs12, only encrypt the final step
+if [ $DO_P12 -eq 1 ]; then
+ NODES_P12="$NODES_REQ"
+ NODES_REQ="-nodes"
+fi
+
+if [ $DO_P11 -eq 1 ]; then
+ if [ -z "$PKCS11_LABEL" ]; then
+ die "PKCS#11 arguments incomplete"
+ fi
+fi
+
+# If undefined, set default key expiration intervals
+if [ -z "$KEY_EXPIRE" ]; then
+ KEY_EXPIRE=3650
+fi
+if [ -z "$CA_EXPIRE" ]; then
+ CA_EXPIRE=3650
+fi
+
+# Set organizational unit to empty string if undefined
+if [ -z "$KEY_OU" ]; then
+ KEY_OU=""
+fi
+
+# Set KEY_CN
+if [ $DO_ROOT -eq 1 ]; then
+ if [ -z "$KEY_CN" ]; then
+ if [ "$1" ]; then
+ KEY_CN="$1"
+ elif [ "$KEY_ORG" ]; then
+ KEY_CN="$KEY_ORG CA"
+ fi
+ fi
+ if [ $BATCH ] && [ "$KEY_CN" ]; then
+ echo "Using CA Common Name:" $KEY_CN
+ fi
+elif [ $BATCH ] && [ "$KEY_CN" ] && [ $# -eq 0 ]; then
+ echo "Using Common Name:" $KEY_CN
+else
+ if [ $# -ne 1 ]; then
+ usage
+ exit 1
+ else
+ KEY_CN="$1"
+ fi
+fi
+
+export CA_EXPIRE KEY_EXPIRE KEY_OU KEY_CN PKCS11_MODULE_PATH PKCS11_PIN
+
+# Show parameters (debugging)
+if [ $DEBUG -eq 1 ]; then
+ echo DO_REQ $DO_REQ
+ echo REQ_EXT $REQ_EXT
+ echo DO_CA $DO_CA
+ echo CA_EXT $CA_EXT
+ echo NODES_REQ $NODES_REQ
+ echo NODES_P12 $NODES_P12
+ echo DO_P12 $DO_P12
+ echo KEY_CN $KEY_CN
+ echo BATCH $BATCH
+ echo DO_ROOT $DO_ROOT
+ echo KEY_EXPIRE $KEY_EXPIRE
+ echo CA_EXPIRE $CA_EXPIRE
+ echo KEY_OU $KEY_OU
+ echo DO_P11 $DO_P11
+ echo PKCS11_MODULE_PATH $PKCS11_MODULE_PATH
+ echo PKCS11_SLOT $PKCS11_SLOT
+ echo PKCS11_ID $PKCS11_ID
+ echo PKCS11_LABEL $PKCS11_LABEL
+fi
+
+# Make sure ./vars was sourced beforehand
+if [ -d "$KEY_DIR" ] && [ "$KEY_CONFIG" ]; then
+ cd "$KEY_DIR"
+
+ # Make sure $KEY_CONFIG points to the correct version
+ # of openssl.cnf
+ if $GREP -i 'easy-rsa version 2\.[0-9]' "$KEY_CONFIG" >/dev/null; then
+ :
+ else
+ echo "$PROGNAME: KEY_CONFIG (set by the ./vars script) is pointing to the wrong"
+ echo "version of openssl.cnf: $KEY_CONFIG"
+ echo "The correct version should have a comment that says: easy-rsa version 2.x";
+ exit 1;
+ fi
+
+ # Build root CA
+ if [ $DO_ROOT -eq 1 ]; then
+ $OPENSSL req $BATCH -days $CA_EXPIRE $NODES_REQ -new -newkey rsa:$KEY_SIZE -sha1 \
+ -x509 -keyout "$CA.key" -out "$CA.crt" -config "$KEY_CONFIG" && \
+ chmod 0600 "$CA.key"
+ else
+ # Make sure CA key/cert is available
+ if [ $DO_CA -eq 1 ] || [ $DO_P12 -eq 1 ]; then
+ if [ ! -r "$CA.crt" ] || [ ! -r "$CA.key" ]; then
+ echo "$PROGNAME: Need a readable $CA.crt and $CA.key in $KEY_DIR"
+ echo "Try $PROGNAME --initca to build a root certificate/key."
+ exit 1
+ fi
+ fi
+
+ # Generate key for PKCS#11 token
+ PKCS11_ARGS=
+ if [ $DO_P11 -eq 1 ]; then
+ stty -echo
+ echo -n "User PIN: "
+ read -r PKCS11_PIN
+ stty echo
+ export PKCS11_PIN
+
+ echo "Generating key pair on PKCS#11 token..."
+ $PKCS11TOOL --module "$PKCS11_MODULE_PATH" --keypairgen \
+ --login --pin "$PKCS11_PIN" \
+ --key-type rsa:1024 \
+ --slot "$PKCS11_SLOT" --id "$PKCS11_ID" --label "$PKCS11_LABEL" || exit 1
+ PKCS11_ARGS="-engine pkcs11 -keyform engine -key $PKCS11_SLOT:$PKCS11_ID"
+ fi
+
+ # Build cert/key
+ ( [ $DO_REQ -eq 0 ] || $OPENSSL req $BATCH -days $KEY_EXPIRE $NODES_REQ -new -newkey rsa:$KEY_SIZE \
+ -keyout "$KEY_CN.key" -out "$KEY_CN.csr" $REQ_EXT -config "$KEY_CONFIG" $PKCS11_ARGS ) && \
+ ( [ $DO_CA -eq 0 ] || $OPENSSL ca $BATCH -days $KEY_EXPIRE -out "$KEY_CN.crt" \
+ -in "$KEY_CN.csr" $CA_EXT -md sha1 -config "$KEY_CONFIG" ) && \
+ ( [ $DO_P12 -eq 0 ] || $OPENSSL pkcs12 -export -inkey "$KEY_CN.key" \
+ -in "$KEY_CN.crt" -certfile "$CA.crt" -out "$KEY_CN.p12" $NODES_P12 ) && \
+ ( [ $DO_CA -eq 0 -o $DO_P11 -eq 1 ] || chmod 0600 "$KEY_CN.key" ) && \
+ ( [ $DO_P12 -eq 0 ] || chmod 0600 "$KEY_CN.p12" )
+
+ # Load certificate into PKCS#11 token
+ if [ $DO_P11 -eq 1 ]; then
+ $OPENSSL x509 -in "$KEY_CN.crt" -inform PEM -out "$KEY_CN.crt.der" -outform DER && \
+ $PKCS11TOOL --module "$PKCS11_MODULE_PATH" --write-object "$KEY_CN.crt.der" --type cert \
+ --login --pin "$PKCS11_PIN" \
+ --slot "$PKCS11_SLOT" --id "$PKCS11_ID" --label "$PKCS11_LABEL"
+ [ -e "$KEY_CN.crt.der" ]; rm "$KEY_CN.crt.der"
+ fi
+
+ fi
+
+# Need definitions
+else
+ need_vars
+fi
diff --git a/ssltools/easy-rsa/2.0/revoke-full b/ssltools/easy-rsa/2.0/revoke-full
new file mode 100755
index 0000000..bf3e5fb
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/revoke-full
@@ -0,0 +1,39 @@
+#!/bin/bash
+
+# revoke a certificate, regenerate CRL,
+# and verify revocation
+
+CRL="crl.pem"
+RT="revoke-test.pem"
+
+if [ $# -ne 1 ]; then
+ echo "usage: revoke-full <common-name>";
+ exit 1
+fi
+
+if [ "$KEY_DIR" ]; then
+ cd "$KEY_DIR"
+ rm -f "$RT"
+
+ # set defaults
+ export KEY_CN=""
+ export KEY_OU=""
+
+ # revoke key and generate a new CRL
+ $OPENSSL ca -revoke "$1.crt" -config "$KEY_CONFIG"
+
+ # generate a new CRL -- try to be compatible with
+ # intermediate PKIs
+ $OPENSSL ca -gencrl -out "$CRL" -config "$KEY_CONFIG"
+ if [ -e export-ca.crt ]; then
+ cat export-ca.crt "$CRL" >"$RT"
+ else
+ cat ca.crt "$CRL" >"$RT"
+ fi
+
+ # verify the revocation
+ $OPENSSL verify -CAfile "$RT" -crl_check "$1.crt"
+else
+ echo 'Please source the vars script first (i.e. "source ./vars")'
+ echo 'Make sure you have edited it to reflect your configuration.'
+fi
diff --git a/ssltools/easy-rsa/2.0/sign-req b/ssltools/easy-rsa/2.0/sign-req
new file mode 100755
index 0000000..38655d3
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/sign-req
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Sign a certificate signing request (a .csr file)
+# with a local root certificate and key.
+
+export EASY_RSA="${EASY_RSA:-.}"
+"$EASY_RSA/pkitool" --interact --sign $*
diff --git a/ssltools/easy-rsa/2.0/vars b/ssltools/easy-rsa/2.0/vars
new file mode 100755
index 0000000..a904547
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/vars
@@ -0,0 +1,64 @@
+# easy-rsa parameter settings
+
+# NOTE: If you installed from an RPM,
+# don't edit this file in place in
+# /usr/share/openvpn/easy-rsa --
+# instead, you should copy the whole
+# easy-rsa directory to another location
+# (such as /etc/openvpn) so that your
+# edits will not be wiped out by a future
+# OpenVPN package upgrade.
+
+# This variable should point to
+# the top level of the easy-rsa
+# tree.
+export EASY_RSA="`pwd`"
+
+#
+# This variable should point to
+# the requested executables
+#
+export OPENSSL="openssl"
+export PKCS11TOOL="pkcs11-tool"
+export GREP="grep"
+
+
+# This variable should point to
+# the openssl.cnf file included
+# with easy-rsa.
+export KEY_CONFIG=`$EASY_RSA/whichopensslcnf $EASY_RSA`
+
+# Edit this variable to point to
+# your soon-to-be-created key
+# directory.
+#
+# WARNING: clean-all will do
+# a rm -rf on this directory
+# so make sure you define
+# it correctly!
+export KEY_DIR="$EASY_RSA/keys"
+
+# Issue rm -rf warning
+echo NOTE: If you run ./clean-all, I will be doing a rm -rf on $KEY_DIR
+
+# Increase this to 2048 if you
+# are paranoid. This will slow
+# down TLS negotiation performance
+# as well as the one-time DH parms
+# generation process.
+export KEY_SIZE=1024
+
+# In how many days should the root CA key expire?
+export CA_EXPIRE=3650
+
+# In how many days should certificates expire?
+export KEY_EXPIRE=3650
+
+# These are the default values for fields
+# which will be placed in the certificate.
+# Don't leave any of these fields blank.
+export KEY_COUNTRY="US"
+export KEY_PROVINCE="CA"
+export KEY_CITY="SanFrancisco"
+export KEY_ORG="Fort-Funston"
+export KEY_EMAIL="me@myhost.mydomain"
diff --git a/ssltools/easy-rsa/2.0/whichopensslcnf b/ssltools/easy-rsa/2.0/whichopensslcnf
new file mode 100755
index 0000000..2260aa8
--- /dev/null
+++ b/ssltools/easy-rsa/2.0/whichopensslcnf
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+if [ "$OPENSSL" ]; then
+ if $OPENSSL version | grep 0.9.6 > /dev/null; then
+ echo "$1/openssl-0.9.6.cnf"
+ else
+ echo "$1/openssl.cnf"
+ fi
+else
+ echo "$1/openssl.cnf"
+fi
+
+exit 0
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 08:24:09 +0000