diff options
Diffstat (limited to 'srtp/doc')
| -rw-r--r-- | srtp/doc/.cvsignore | 3 | ||||
| -rw-r--r-- | srtp/doc/CVS/Entries | 11 | ||||
| -rw-r--r-- | srtp/doc/CVS/Repository | 1 | ||||
| -rw-r--r-- | srtp/doc/CVS/Root | 1 | ||||
| -rw-r--r-- | srtp/doc/Doxyfile | 1042 | ||||
| -rw-r--r-- | srtp/doc/Makefile | 44 | ||||
| -rw-r--r-- | srtp/doc/Makefile.in | 44 | ||||
| -rw-r--r-- | srtp/doc/crypto_kernel.txt | 76 | ||||
| -rw-r--r-- | srtp/doc/draft-irtf-cfrg-icm-00.txt | 1 | ||||
| -rw-r--r-- | srtp/doc/header.template | 115 | ||||
| -rw-r--r-- | srtp/doc/intro.txt | 395 | ||||
| -rw-r--r-- | srtp/doc/libsrtp.pdf | bin | 364186 -> 0 bytes | |||
| -rw-r--r-- | srtp/doc/references.txt | 21 | ||||
| -rw-r--r-- | srtp/doc/rfc3711.txt | 3139 |
14 files changed, 0 insertions, 4893 deletions
diff --git a/srtp/doc/.cvsignore b/srtp/doc/.cvsignore deleted file mode 100644 index 55a080a..0000000 --- a/srtp/doc/.cvsignore +++ /dev/null @@ -1,3 +0,0 @@ -Makefile -header.tex -latex diff --git a/srtp/doc/CVS/Entries b/srtp/doc/CVS/Entries deleted file mode 100644 index 3387ba1..0000000 --- a/srtp/doc/CVS/Entries +++ /dev/null @@ -1,11 +0,0 @@ -/.cvsignore/1.2/Thu Sep 29 14:31:57 2005// -/Doxyfile/1.3/Wed Jul 12 00:50:56 2006// -/Makefile.in/1.2/Thu Sep 29 14:27:35 2005// -/crypto_kernel.txt/1.2/Thu Sep 29 12:36:43 2005// -/draft-irtf-cfrg-icm-00.txt/1.1.1.1/Wed Sep 21 22:51:41 2005// -/header.template/1.2/Thu Jun 8 18:44:32 2006// -/intro.txt/1.4/Fri Sep 30 17:30:26 2005// -/references.txt/1.1.1.1/Wed Sep 21 22:51:44 2005// -/rfc3711.txt/1.1.1.1/Wed Sep 21 22:51:45 2005// -/libsrtp.pdf/1.7/Fri May 4 20:12:04 2007// -D diff --git a/srtp/doc/CVS/Repository b/srtp/doc/CVS/Repository deleted file mode 100644 index f8aaa51..0000000 --- a/srtp/doc/CVS/Repository +++ /dev/null @@ -1 +0,0 @@ -srtp/doc diff --git a/srtp/doc/CVS/Root b/srtp/doc/CVS/Root deleted file mode 100644 index 05e15d8..0000000 --- a/srtp/doc/CVS/Root +++ /dev/null @@ -1 +0,0 @@ -srtp.cvs.sourceforge.net:/cvsroot/srtp diff --git a/srtp/doc/Doxyfile b/srtp/doc/Doxyfile deleted file mode 100644 index c6e6a6d..0000000 --- a/srtp/doc/Doxyfile +++ /dev/null @@ -1,1042 +0,0 @@ -# Doxyfile 1.3-rc3 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# General configuration options -#--------------------------------------------------------------------------- - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = libSRTP - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = 1.3.22 - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en -# (Japanese with english messages), Korean, Norwegian, Polish, Portuguese, -# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish and Ukrainian. - -OUTPUT_LANGUAGE = English - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = YES - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these class will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = NO - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show -# all inherited members of a class in the documentation of that class -# as if those members were ordinary class members. Constructors, -# destructors and assignment operators of the base classes will not be -# shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. It is allowed to use relative paths in the argument list. - -STRIP_FROM_PATH = - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower case letters. If set to YES upper case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# users are adviced to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explict @brief command for a brief description. - -JAVADOC_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# reimplements. - -INHERIT_DOCS = YES - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 3 - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consist of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. -# For instance some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = intro.txt ../include/srtp.h ../crypto/include/crypto_types.h ../crypto/include/err.h ../crypto/include/crypto.h crypto_kernel.txt - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp -# *.h++ *.idl *.odl - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories -# that are symbolic links (a Unix filesystem feature) are excluded from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. - -EXCLUDE_PATTERNS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. - -INPUT_FILTER = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = NO - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet - -HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output dir. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non empty doxygen will try to run -# the html help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the Html help documentation and to the tree view. - -TOC_EXPAND = NO - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = YES - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = letter - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = header.tex - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimised for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assigments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_XML = NO - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse the -# parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::addtions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES tag can be used to specify one or more tagfiles. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or -# super classes. Setting the tag to NO turns the diagrams off. Note that this -# option is superceded by the HAVE_DOT option below. This is only a fallback. It is -# recommended to install and use dot, since it yield more powerful graphs. - -CLASS_DIAGRAMS = YES - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found on the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_WIDTH = 1024 - -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_HEIGHT = 1024 - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermedate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES - -#--------------------------------------------------------------------------- -# Configuration::addtions related to the search engine -#--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - -SEARCHENGINE = NO - -# The CGI_NAME tag should be the name of the CGI script that -# starts the search engine (doxysearch) with the correct parameters. -# A script with this name will be generated by doxygen. - -CGI_NAME = search.cgi - -# The CGI_URL tag should be the absolute URL to the directory where the -# cgi binaries are located. See the documentation of your http daemon for -# details. - -CGI_URL = - -# The DOC_URL tag should be the absolute URL to the directory where the -# documentation is located. If left blank the absolute path to the -# documentation, with file:// prepended to it, will be used. - -DOC_URL = - -# The DOC_ABSPATH tag should be the absolute path to the directory where the -# documentation is located. If left blank the directory on the local machine -# will be used. - -DOC_ABSPATH = - -# The BIN_ABSPATH tag must point to the directory where the doxysearch binary -# is installed. - -BIN_ABSPATH = /usr/local/bin/ - -# The EXT_DOC_PATHS tag can be used to specify one or more paths to -# documentation generated for other projects. This allows doxysearch to search -# the documentation for these projects as well. - -EXT_DOC_PATHS = diff --git a/srtp/doc/Makefile b/srtp/doc/Makefile deleted file mode 100644 index d4c0845..0000000 --- a/srtp/doc/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# Makefile for libSRTP documentation -# -# David A. McGrew -# Cisco Systems, Inc. -# -# This makefile does not use the autoconf system; we don't really need -# it. We just run doxygen then latex. If you don't have either of -# these, then there is no way that you can make your own -# documentation. Of course, you can just go online at pick up the -# documentation from http://srtp.sourceforge.net. - -srcdir = . -top_srcdir = .. -top_builddir = ../ - - -# Determine the version of the library - -version = $(shell cat $(top_srcdir)/VERSION) - - -.PHONY: libsrtpdoc cryptodoc clean -libsrtpdoc: - @if test ! -e Doxyfile; then \ - echo "*** Sorry, can't build doc outside source dir"; exit 1; \ - fi - sed 's/LIBSRTPVERSION/$(version)/' header.template > header.tex - doxygen - sed 's/\subsection/\section/' latex/index.tex > latex/index.tmp - mv latex/index.tmp latex/index.tex - cd latex; make - cp latex/refman.pdf libsrtp.pdf - - -cryptodoc: clean - doxygen crypto.dox - cd latex; make - cp latex/refman.pdf crypto.pdf - -clean: - rm -rf latex/ header.tex - for a in * ; do \ - if [ -f "$$a~" ] ; then rm -f $$a~; fi; \ - done; diff --git a/srtp/doc/Makefile.in b/srtp/doc/Makefile.in deleted file mode 100644 index 5b4b6bd..0000000 --- a/srtp/doc/Makefile.in +++ /dev/null @@ -1,44 +0,0 @@ -# Makefile for libSRTP documentation -# -# David A. McGrew -# Cisco Systems, Inc. -# -# This makefile does not use the autoconf system; we don't really need -# it. We just run doxygen then latex. If you don't have either of -# these, then there is no way that you can make your own -# documentation. Of course, you can just go online at pick up the -# documentation from http://srtp.sourceforge.net. - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = @top_builddir@ -VPATH = @srcdir@ - -# Determine the version of the library - -version = $(shell cat $(top_srcdir)/VERSION) - - -.PHONY: libsrtpdoc cryptodoc clean -libsrtpdoc: - @if test ! -e Doxyfile; then \ - echo "*** Sorry, can't build doc outside source dir"; exit 1; \ - fi - sed 's/LIBSRTPVERSION/$(version)/' header.template > header.tex - doxygen - sed 's/\subsection/\section/' latex/index.tex > latex/index.tmp - mv latex/index.tmp latex/index.tex - cd latex; make - cp latex/refman.pdf libsrtp.pdf - - -cryptodoc: clean - doxygen crypto.dox - cd latex; make - cp latex/refman.pdf crypto.pdf - -clean: - rm -rf latex/ header.tex - for a in * ; do \ - if [ -f "$$a~" ] ; then rm -f $$a~; fi; \ - done; diff --git a/srtp/doc/crypto_kernel.txt b/srtp/doc/crypto_kernel.txt deleted file mode 100644 index b0d033f..0000000 --- a/srtp/doc/crypto_kernel.txt +++ /dev/null @@ -1,76 +0,0 @@ -/** - -@defgroup CryptoKernel Cryptographic Kernel - -All of the cryptographic functions are contained in a kernel. - -*/ - -/** - -@defgroup CipherImplementations Ciphers -@ingroup CryptoKernel - -@brief A generic cipher type enables cipher agility, that is, the -ability to write code that runs with multiple cipher types. -Ciphers can be used through the crypto kernel, or can be accessed -directly, if need be. - -@{ - -*/ - -/** - * @brief Allocates a cipher of a particular type. - * @warning May be implemented as a macro. - */ -err_status_t -cipher_type_alloc(cipher_type_t *ctype, cipher_t **cipher, - unsigned key_len); - -/** - * @brief Initialized a cipher to use a particular key. May - * be invoked more than once on the same cipher. - * @warning May be implemented as a macro. - */ - -err_status_t -cipher_init(cipher_t *cipher, const uint8_t *key); - -/** - * @brief Sets the initialization vector of a given cipher. - * @warning May be implemented as a macro. - */ - -err_status_t -cipher_set_iv(cipher_t *cipher, void *iv); - -/** - * @brief Encrypts a buffer with a given cipher. - * @warning May be implemented as a macro. - */ - -err_status_t -cipher_encrypt(cipher_t *cipher, void *buf, unsigned int *len); - -/** - * @brief Sets a buffer to the keystream generated by the cipher. - * @warning May be implemented as a macro. - */ -err_status_t -cipher_output(cipher_t *c, uint8_t *buffer, int num_octets_to_output); - -/** - * @brief Deallocates a cipher. - * @warning May be implemented as a macro. - */ -err_status_t -cipher_dealloc(cipher_t *cipher); - - - -/** - * @} - */ - - */
\ No newline at end of file diff --git a/srtp/doc/draft-irtf-cfrg-icm-00.txt b/srtp/doc/draft-irtf-cfrg-icm-00.txt deleted file mode 100644 index ddfce33..0000000 --- a/srtp/doc/draft-irtf-cfrg-icm-00.txt +++ /dev/null @@ -1 +0,0 @@ -
Crypto Forum Research Group David A. McGrew
Internet Draft Cisco Systems, Inc.
Expires April, 2003 October, 2002
Integer Counter Mode
<draft-irtf-cfrg-icm-00.txt>
Status of this Memo
This document is an Internet Draft and is in full conformance with
all provisions of Section 10 of RFC-2026. Internet Drafts are working
documents of the Internet Engineering Task Force (IETF), its areas,
and working groups. Note that other groups may also distribute
working documents as Internet Drafts.
Internet Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
1. Abstract
This document specifies Integer Counter Mode (ICM), a mode of
operation of a block cipher which defines an indexed keystream
generator (which generates a keystream segment given an index).
This mode is efficient, parallelizable, and has been proven secure
given realistic assumptions about the block cipher. Test vectors
are provided for AES.
Counter Mode admits many variations. The variant specified in
this document is secure and flexible, yet it enables a single
implementation of a keystream generator to suffice in different
application domains.
McGrew [Page 1]
Internet Draft Integer Counter Mode October, 2002
2. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in
this document are to be interpreted as described in RFC-2119 [B97].
3. Introduction
Counter Mode is a way to define a pseudorandom keystream generator
using a block cipher [CTR]. The keystream can be used for additive
encryption, key derivation, or any other application requiring
pseudorandom data.
In ICM, the keystream is logically broken into segments. Each
segment is identified with a segment index, and the segments have
equal lengths. This segmentation makes ICM especially appropriate
for securing packet-based protocols.
4. ICM
In this section, ICM keystream generation and encryption are
defined.
4.1. ICM Parameters
The following parameters are used in ICM. These parameters MUST
remain fixed for any given use of a key.
Parameter Meaning
-----------------------------------------------------------------
BLOCK_LENGTH the number of octets in the cipher block
KEY_LENGTH the number of octets in the cipher key
OFFSET_LENGTH the number of octets in the offset
SEGMENT_INDEX_LENGTH the number of octets in the segment index
BLOCK_INDEX_LENGTH the number of octets in the block index
4.2. Keystream Segments
Conceptually, ICM is a keystream generator that takes a secret key
and a segment index as an input and then outputs a keystream
segment. The segmentation lends itself to packet encryption, as
each keystream segment can be used to encrypt a distinct packet.
A counter is a value containing BLOCK_LENGTH octets which is
McGrew [Page 2]
Internet Draft Integer Counter Mode October, 2002
incremented using an increment function based on integer addition,
to produce a sequence of distinct values which are used as inputs to
the block cipher. (In the context of this specification, an integer
is an octet string, the most significant of which is the first.)
The output blocks of the cipher are concatenated to form the
keystream segment. The first octet of the segment is the first
octet of the first output block, and so on. A schematic of this
process is shown in Figure 1.
Figure 1. The generation of a keystream segment given a segment
index and a block cipher key K. Here C[i] and S[i] denote the ith
counter and keystream block, respectively.
segment
index
|
v
C[0] -----> C[1] -----> C[2] -----> ...
| | |
v v v
+---+ +---+ +---+
K->| E | K->| E | K->| E | ...
+---+ +---+ +---+
| | |
v v v
S[0] S[1] S[2] ...
The ith counter C[i] of the keystream segment with segment index s
is defined as
C[i] = (i + s * (256^BLOCK_INDEX_LENGTH)) (+) r
where r denotes the shifted Offset, which is defined as the Offset
times 256^(BLOCK_LENGTH - OFFSET_LENGTH). (This multiplication
left-shifts the Offset so that it is aligned with the leftmost
edge of the block.) Here ^ denotes exponentiation and (+) denotes
the bitwise exclusive-or operation.
The number of blocks in any segment MUST NOT exceed
256^BLOCK_INDEX_LENGTH. The number of segments MUST NOT exceed
256^SEGMENT_INDEX_LENGTH. These restrictions ensure the uniqueness
of each block cipher input. They also imply that each segment
contains no more than (256^BLOCK_INDEX_LENGTH)*BLOCK_LENGTH octets.
The sum of SEGMENT_INDEX_LENGTH and BLOCK_INDEX_LENGTH MUST NOT
exceed BLOCK_LENGTH / 2. This requirement protects the ICM
keystream generator from potentially failing to be pseudorandom (see
McGrew [Page 3]
Internet Draft Integer Counter Mode October, 2002
the rationale).
Figure 2. An illustration of the structure of a counter with
BLOCK_LENGTH = 8, SEGMENT_INDEX_LENGTH = 2, and BLOCK_INDEX_LENGTH
= 2. The field marked `null' is not part of either the block
or segment indices.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| null |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| segment index | block index |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
4.3. ICM Encryption
Unless otherwise specified, ICM encryption consists of bitwise
exclusive-oring the keystream into the plaintext to produce
the ciphertext.
4.4 ICM KEY
An ICM key consists of the block cipher key and an Offset. The
Offset is an integer with OFFSET_LENGTH octets, which is used to
`randomize' the logical starting point of keystream. The Offset is
crucial to providing security; see the rationale. The value of
OFFSET_LENGTH SHOULD be at least half that of BLOCK_LENGTH.
For the purposes of transporting an ICM key, e.g. in a signaling
protocol, that key SHOULD be considered a sequence of octets in
which the block cipher key precedes the Offset.
5. Implementation Considerations
Implementation of the `add one modulo 2^m' operation is simple. For
example, with BLOCK_LENGTH = 8 (m=64), it can be implemented in C as
if (!++x) ++y;
where x and y are 32-bit unsigned integers in network byte order.
The implementation of general purpose addition modulo 2^m is
slightly more complicated.
The fact that the Offset is left-aligned enables an implementation
McGrew [Page 4]
Internet Draft Integer Counter Mode October, 2002
to avoid propagating carry values outside of the block index and/or
the segment index. Choosing an OFFSET_LENGTH value equal to half
that of BLOCK_LENGTH avoids all of these carries, since the Offset
is then shifted so that it occupies the most significant octets of
the block, while the block and segment indices occupy the least
significant ones.
6. Parameters and Test Vectors for AES
This section provides ICM parameters and test vectors for AES
with a 128 bit block size and 128 bit key (that is, with a
BLOCK_LENGTH and KEY_LENGTH of 16).
All integers are expressed in hexadecimal. Each consecutive pair of
hex digits corresponds to an octet, so that the integer
000102030405060708090A0B0C0D0E0F corresponds to the octet sequence
{ 00, 01, 02, 02 ... }.
BLOCK_LENGTH 16
KEY_LENGTH 16
OFFSET_LENGTH 14
SEGMENT_INDEX_LENGTH 6
BLOCK_INDEX_LENGTH 2
Block Cipher Key: 2b7e151628aed2a6abf7158809cf4f3c
Offset: f0f1f2f3f4f5f6f7f8f9fafbfcfd
Segment Index: 000000000000
Keystream: e03ead0935c95e80e166b16dd92b4eb4
d23513162b02d0f72a43a2fe4a5f97ab
...
The counter values that correspond to the keystream blocks are
outlined below.
Counter Keystream
f0f1f2f3f4f5f6f7f8f9fafbfcfd0000 e03ead0935c95e80e166b16dd92b4eb4
f0f1f2f3f4f5f6f7f8f9fafbfcfd0001 d23513162b02d0f72a43a2fe4a5f97ab
f0f1f2f3f4f5f6f7f8f9fafbfcfd0002 41e95b3bb0a2e8dd477901e4fca894c0
... ...
7. Security Considerations
Each block cipher input is distinct for any segment and any block
index. To see this fact, subtract any two counter values with
distinct segment or block indices; the result is non-zero.
McGrew [Page 5]
Internet Draft Integer Counter Mode October, 2002
The limitation on the number of segments which can be generated
ensures that the probability with which an adversary can distinguish
the keystream generator from random is negligible. For a
theoretical justification of this fact, see Bellare et. al. [BR98].
Their analysis shows that if the block cipher cannot be
distinguished from a random permutation, then the keystream
generated by ICM cannot be distinguished from keystream generated by
a truly random process, as long as the length of keystream which is
generated is kept below some threshold. The threshold defined in
Section 4.2 is sufficient for most uses of ICM for encryption. This
specification refrains from dictating a lower threshold in order to
refrain from dictating a particular policy, and to avoid a
complicated digression.
The use of the Offset, a key-dependent value which randomizes the
starting position of the keystream, is essential for security. The
omission of this mechanism leaves the door open for practical
attacks, such as the key collision attack and Hellman's time-memory
tradeoff attack; see McGrew and Fluhrer [MF00] for a description of
these attacks which is applicable to ICM. Several counter mode
proposals do not include an offset, and are thus vulnerable to these
attacks.
8. Rationale
This speficiation includes input from implementation experience with
several counter mode variants. The goals of ICM are to provide:
o a secure keystream generator and cipher, and
o a definition flexible enough that a single implementation can be
used for a variety of applications (e.g., Secure RTP [SRTP],
IPsec ESP [KA96]).
The Offset slightly increases the key management overhead, but this
minor disadvantage is well outweighed by other savings. The Offset
is no larger than a CBC mode IV, and ICM enables the use of an
explicit IV (as is commonly used with CBC [MD98]) to be avoided.
9. History
This draft is based on draft-mcgrew-saag-icm-00.txt, which was
submitted to SAAG on November, 2001 and which expired in May, 2002.
The current definition of ICM has changed from the earlier one; the
counter formation is different and the specifications are
McGrew [Page 6]
Internet Draft Integer Counter Mode October, 2002
unfortunately not interoperable. This change was motivated by a
considerable amount of feedback on the desirability of admitting
optimizations of the sort described in Section 5, in which the carry
operations of counter addition need not be propagated across a large
register.
The current definition of ICM is interoperable with that defined in
Secure RTP [SRTP].
10. Acknowledgements
Thanks are due to Helger Lipmaa, Jerome Etienne, Scott Fluhrer and
Mats Naslund for their helpful discussion and comments.
11. Contact Information
Questions and comments on this draft SHOULD be sent to:
David A. McGrew
Cisco Systems, Inc.
mcgrew@cisco.com
and copied to the Crypto Forum Research Group at:
cfrg@ietf.org.
12. References
[BR98] M. Bellare, A. Desai, E. Lokipii and P. Rogaway, A
Concrete Security Treatment of Symmetric Encryption:
Analysis of DES Modes of Operation, Proceedings of
the 38th Symposium on Foundations of Computer
Science, IEEE, 1997.
[B97] S. Bradner, Key words for use in RFCs to Indicate
Requirement Levels, RFC 2119, March 1997.
[AES] The Advanced Encryption Standard, United States
National Institute for Standards and Technology (NIST),
http://www.nist.gov/aes/.
[CTR] M. Dworkin, NIST Special Publication 800-38A,
"Recommendation for Block Cipher Modes of Operation: Methods
and Techniques", 2001. Online at
McGrew [Page 7]
Internet Draft Integer Counter Mode October, 2002
http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-
38a.pdf.
[MD98] Madson, C., and Doraswamy, N., "The ESP DES-CBC Cipher
Algorithm With Explicit IV", RFC 2405, November 1998.
[MF00] D. McGrew and S. Fluhrer, Attacks on Additive Encryption and
Implications on Internet Security, Selected Areas in
Cryptography 2000.
[SRTP] The Secure Real-time Transport Protocol, Baugher et. al.,
Internet Draft, draft-ietf-avt-srtp-05.txt.
McGrew [Page 8]
\ No newline at end of file diff --git a/srtp/doc/header.template b/srtp/doc/header.template deleted file mode 100644 index 2c0b96d..0000000 --- a/srtp/doc/header.template +++ /dev/null @@ -1,115 +0,0 @@ -% header.tex -% -% header file for the libSRTP documentation - based on the header -% file generated by doxygen, with the initial chapters of the -% original libSRTP documentation tacked on -% -\documentclass[letterpaper]{book} -\usepackage{makeidx} -\usepackage{fancyhdr} -\usepackage{graphicx} -\usepackage{multicol} -\usepackage{float} -\usepackage{textcomp} -\usepackage{alltt} -\usepackage{times} -\usepackage{graphicx} -\ifx\pdfoutput\undefined -\usepackage[ps2pdf, - pagebackref=true, - colorlinks=true, - linkcolor=blue - ]{hyperref} -\else -\usepackage[pdftex, - pagebackref=true, - colorlinks=true, - linkcolor=blue - ]{hyperref} -\fi -\usepackage{doxygen} -\makeindex -\setcounter{tocdepth}{1} -\renewcommand{\footrulewidth}{0.4pt} - -% these lengths are from DAM -\textwidth = 6.5 in -%\textheight = 9 in -\oddsidemargin = 0.0 in -\evensidemargin = 0.0 in -\topmargin = 0.0 in -\headheight = 0.0 in -%\headsep = 0.0 in -\parskip = 0.2in -\parindent = 0.0in - -% these header and footer definitions from DAM -\lhead{libSRTP} -\chead{} -\rhead{\rightmark} -%\rhead{\slshape } -\lfoot{} -\cfoot{ \thepage } -\rfoot{} -%\fancyhead[LE,RO]{\rightmark } -%\fancyhead[LO,RE]{\slshape } - -% let's use the palatino font -\fontfamily{ppl} -\selectfont - - -\begin{document} -\begin{titlepage} -\vspace*{4cm} -%\begin{center} -{\Huge -libSRTP LIBSRTPVERSION Overview and Reference Manual\\ - \hrulefill -}\\ -\vspace*{0cm} -\begin{flushright} -{\Large David A. McGrew \\ \texttt{mcgrew@cisco.com} }\\ -\vspace*{0.5cm} -\end{flushright} -%\end{center} - -%\includegraphics[scale=.8]{phone} - -\end{titlepage} - - -\clearemptydoublepage -\vspace*{3cm} -{\LARGE Preface} -\vspace{1cm} - -The original implementation and documentation of libSRTP was written -by David McGrew of Cisco Systems, Inc. in order to promote the use, -understanding, and interoperability of Secure RTP. Michael Jerris -contributed support for building under MSVC. Andris Pavenis -contributed many important fixes. Brian West contributed changes to -enable dynamic linking. Yves Shumann reported documentation bugs. -Randell Jesup contributed a working SRTCP implementation and other -fixes. Alex Vanzella and Will Clark contributed changes so that the -AES ICM implementation can be used for ISMA media encryption. Steve -Underwood contributed x86\_64 portability changes. We also give -thanks to Fredrik Thulin, Brian Weis, Mark Baugher, Jeff Chan, Bill -Simon, Douglas Smith, Bill May, Richard Preistley, Joe Tardo and -others for contributions, comments, and corrections. - -This reference material in this documenation was generated using the -\texttt{doxygen} utility for automatic documentation of source code. - -\copyright 2001-2005 by David A. McGrew, Cisco Systems, Inc. -\thispagestyle{empty} - -\clearemptydoublepage -\pagenumbering{roman} -\tableofcontents -%\clearemptydoublepage - -\clearemptydoublepage -\pagenumbering{arabic} - - diff --git a/srtp/doc/intro.txt b/srtp/doc/intro.txt deleted file mode 100644 index f315599..0000000 --- a/srtp/doc/intro.txt +++ /dev/null @@ -1,395 +0,0 @@ -/** - -@mainpage Introduction to libSRTP - -This document describes libSRTP, the Open Source Secure RTP library -from Cisco Systems, Inc. RTP is the Real-time Transport Protocol, an -IETF standard for the transport of real-time data such as telephony, -audio, and video, defined by RFC1889. Secure RTP (SRTP) is an RTP -profile for providing confidentiality to RTP data and authentication -to the RTP header and payload. SRTP is an IETF Proposed Standard, and -is defined in RFC 3711, and was developed in the IETF Audio/Video -Transport (AVT) Working Group. This library supports all of the -mandatory features of SRTP, but not all of the optional features. See -the @ref Features section for more detailed information. - -This document is organized as follows. The first chapter provides -background material on SRTP and overview of libSRTP. The following -chapters provide a detailed reference to the libSRTP API and related -functions. The reference material is created automatically (using the -doxygen utility) from comments embedded in some of the C header -files. The documentation is organized into modules in order to improve -its clarity. These modules do not directly correspond to files. An -underlying cryptographic kernel provides much of the basic -functionality of libSRTP, but is mostly undocumented because it does -its work behind the scenes. - -@section LICENSE License and Disclaimer - -libSRTP is distributed under the following license, which is included -in the source code distribution. It is reproduced in the manual in -case you got the library from another source. - -@latexonly -\begin{quote} -Copyright (c) 2001-2005 Cisco Systems, Inc. All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions -are met: -\begin{itemize} -\item Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. -\item Redistributions in binary form must reproduce the above - copyright notice, this list of conditions and the following - disclaimer in the documentation and/or other materials provided - with the distribution. -\item Neither the name of the Cisco Systems, Inc. nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. -\end{itemize} -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED -OF THE POSSIBILITY OF SUCH DAMAGE. -\end{quote} -@endlatexonly - -@section Features Supported Features - -This library supports all of the mandatory-to-implement features of -SRTP (as defined by the most recent Internet Draft). Some of these -features can be selected (or de-selected) at run time by setting an -appropriate policy; this is done using the structure srtp_policy_t. -Some other behaviors of the protocol can be adapted by defining an -approriate event handler for the exceptional events; see the @ref -SRTPevents section. - -Some options that are not included in the specification are supported. -Most notably, the TMMH authentication function is included, though it -was removed from the SRTP Internet Draft during the summer of 2002. - - -@latexonly -Some options that are described in the SRTP specification are not -supported. This includes -\begin{itemize} -\item the Master Key Index (MKI), -\item key derivation rates other than zero, -\item the cipher F8, -\item anti-replay lists with sizes other than 128, -\item the use of the packet index to select between master keys. -\end{itemize} -@endlatexonly - -The user should be aware that it is possible to misuse this libary, -and that the result may be that the security level it provides is -inadequate. If you are implementing a feature using this library, you -will want to read the Security Considerations section of the Internet -Draft. In addition, it is important that you read and understand the -terms outlined in the @ref LICENSE section. - - -@section Installing Installing and Building libSRTP - -@latexonly - -To install libSRTP, download the latest release of the distribution -from \texttt{srtp.sourceforge.net}. The format of the names of the -distributions are \texttt{srtp-A.B.C.tgz}, where \texttt{A} is the -version number, \texttt{B} is the major release number, \texttt{C} is -the minor release number, and \texttt{tgz} is the file -extension\footnote{The extension \texttt{.tgz} is identical to -\texttt{tar.gz}, and indicates a compressed tar file.} You probably -want to get the most recent release. Unpack the distribution and -extract the source files; the directory into which the soruce files -will go is named \texttt{srtp}. - -libSRTP uses the GNU \texttt{autoconf} and \texttt{make} -utilities\footnote{BSD make will not work; if both versions of make -are on your platform, you can invoke GNU make as \texttt{gmake}.}. In -the \texttt{srtp} directory, run the configure script and then make: -\begin{verbatim} - ./configure [ options ] - make -\end{verbatim} -The configure script accepts the following options: -\begin{quote} -\begin{description} -\item[--help] provides a usage summary. -\item[--disable-debug] compiles libSRTP without the runtime - dynamic debugging system. -\item[--enable-generic-aesicm] compile in changes for ismacryp -\item[--enable-syslog] use syslog for error reporting. -\item[--disable-stdout] diables stdout for error reporting. -\item[--enable-console] use \texttt{/dev/console} for error reporting -\item[--gdoi] use GDOI key management (disabled at present). -\end{description} -\end{quote} - -By default, dynamic debbuging is enabled and stdout is used for -debugging. You can use the configure options to have the debugging -output sent to syslog or the system console. Alternatively, you can -define ERR\_REPORTING\_FILE in \texttt{include/conf.h} to be any other -file that can be opened by libSRTP, and debug messages will be sent to -it. - -This package has been tested on the following platforms: Mac OS X -(powerpc-apple-darwin1.4), Cygwin (i686-pc-cygwin), Solaris -(sparc-sun-solaris2.6), RedHat Linux 7.1 and 9 (i686-pc-linux), and -OpenBSD (sparc-unknown-openbsd2.7). - - -@endlatexonly - -@section Applications Applications - -@latexonly - -Several test drivers and a simple and portable srtp application are -included in the \texttt{test/} subdirectory. - -\begin{center} -\begin{tabular}{ll} -\hline -Test driver & Function tested \\ -\hline -kernel\_driver & crypto kernel (ciphers, auth funcs, rng) \\ -srtp\_driver & srtp in-memory tests (does not use the network) \\ -rdbx\_driver & rdbx (extended replay database) \\ -roc\_driver & extended sequence number functions \\ -replay\_driver & replay database \\ -cipher\_driver & ciphers \\ -auth\_driver & hash functions \\ -\hline -\end{tabular} -\end{center} - -The app rtpw is a simple rtp application which reads words from -/usr/dict/words and then sends them out one at a time using [s]rtp. -Manual srtp keying uses the -k option; automated key management -using gdoi will be added later. - -The usage for rtpw is - -\texttt{rtpw [[-d $<$debug$>$]* [-k $<$key$>$ [-a][-e]] [-s | -r] dest\_ip -dest\_port][-l]} - -Either the -s (sender) or -r (receiver) option must be chosen. The -values dest\_ip, dest\_port are the IP address and UDP port to which -the dictionary will be sent, respectively. The options are: -\begin{center} -\begin{tabular}{ll} - -s & (S)RTP sender - causes app to send words \\ - -r & (S)RTP receive - causes app to receve words \\ - -k $<$key$>$ & use SRTP master key $<$key$>$, where the - key is a hexadecimal value (without the - leading "0x") \\ - -e & encrypt/decrypt (for data confidentiality) - (requires use of -k option as well)\\ - -a & message authentication - (requires use of -k option as well) \\ - -l & list the avaliable debug modules \\ - -d $<$debug$>$ & turn on debugging for module $<$debug$>$ \\ -\end{tabular} -\end{center} - -In order to get a random 30-byte value for use as a key/salt pair, you -can use the \texttt{rand\_gen} utility in the \texttt{test/} -subdirectory. - -An example of an SRTP session using two rtpw programs follows: - -\begin{verbatim} -[sh1] set k=`test/rand_gen -n 30` -[sh1] echo $k -c1eec3717da76195bb878578790af71c4ee9f859e197a414a78d5abc7451 -[sh1]$ test/rtpw -s -k $k -ea 0.0.0.0 9999 -Security services: confidentiality message authentication -set master key/salt to C1EEC3717DA76195BB878578790AF71C/4EE9F859E197A414A78D5ABC7451 -setting SSRC to 2078917053 -sending word: A -sending word: a -sending word: aa -sending word: aal -sending word: aalii -sending word: aam -sending word: Aani -sending word: aardvark -... - -[sh2] set k=c1eec3717da76195bb878578790af71c4ee9f859e197a414a78d5abc7451 -[sh2]$ test/rtpw -r -k $k -ea 0.0.0.0 9999 -security services: confidentiality message authentication -set master key/salt to C1EEC3717DA76195BB878578790AF71C/4EE9F859E197A414A78D5ABC7451 -19 octets received from SSRC 2078917053 word: A -19 octets received from SSRC 2078917053 word: a -20 octets received from SSRC 2078917053 word: aa -21 octets received from SSRC 2078917053 word: aal -... -\end{verbatim} - - -@endlatexonly - - -@section Review Secure RTP Background - -In this section we review SRTP and introduce some terms that are used -in libSRTP. An RTP session is defined by a pair of destination -transport addresses, that is, a network address plus a pair of UDP -ports for RTP and RTCP. RTCP, the RTP control protocol, is used to -coordinate between the participants in an RTP session, e.g. to provide -feedback from receivers to senders. An @e SRTP @e session is -similarly defined; it is just an RTP session for which the SRTP -profile is being used. An SRTP session consists of the traffic sent -to the SRTP or SRTCP destination transport addresses. Each -participant in a session is identified by a synchronization source -(SSRC) identifier. Some participants may not send any SRTP traffic; -they are called receivers, even though they send out SRTCP traffic, -such as receiver reports. - -RTP allows multiple sources to send RTP and RTCP traffic during the -same session. The synchronization source identifier (SSRC) is used to -distinguish these sources. In libSRTP, we call the SRTP and SRTCP -traffic from a particular source a @e stream. Each stream has its own -SSRC, sequence number, rollover counter, and other data. A particular -choice of options, cryptographic mechanisms, and keys is called a @e -policy. Each stream within a session can have a distinct policy -applied to it. A session policy is a collection of stream policies. - -A single policy can be used for all of the streams in a given session, -though the case in which a single @e key is shared across multiple -streams requires care. When key sharing is used, the SSRC values that -identify the streams @b must be distinct. This requirement can be -enforced by using the convention that each SRTP and SRTCP key is used -for encryption by only a single sender. In other words, the key is -shared only across streams that originate from a particular device (of -course, other SRTP participants will need to use the key for -decryption). libSRTP supports this enforcement by detecting the case -in which a key is used for both inbound and outbound data. - - -@section Overview libSRTP Overview - -libSRTP provides functions for protecting RTP and RTCP. RTP packets -can be encrypted and authenticated (using the srtp_protect() -function), turning them into SRTP packets. Similarly, SRTP packets -can be decrypted and have their authentication verified (using the -srtp_unprotect() function), turning them into RTP packets. Similar -functions apply security to RTCP packets. - -The typedef srtp_stream_t points to a structure holding all of the -state associated with an SRTP stream, including the keys and -parameters for cipher and message authentication functions and the -anti-replay data. A particular srtp_stream_t holds the information -needed to protect a particular RTP and RTCP stream. This datatype -is intentionally opaque in order to better seperate the libSRTP -API from its implementation. - -Within an SRTP session, there can be multiple streams, each -originating from a particular sender. Each source uses a distinct -stream context to protect the RTP and RTCP stream that it is -originating. The typedef srtp_t points to a structure holding all of -the state associated with an SRTP session. There can be multiple -stream contexts associated with a single srtp_t. A stream context -cannot exist indepent from an srtp_t, though of course an srtp_t can -be created that contains only a single stream context. A device -participating in an SRTP session must have a stream context for each -source in that session, so that it can process the data that it -receives from each sender. - - -In libSRTP, a session is created using the function srtp_create(). -The policy to be implemented in the session is passed into this -function as an srtp_policy_t structure. A single one of these -structures describes the policy of a single stream. These structures -can also be linked together to form an entire session policy. A linked -list of srtp_policy_t structures is equivalent to a session policy. -In such a policy, we refer to a single srtp_policy_t as an @e element. - -An srtp_policy_t strucutre contains two crypto_policy_t structures -that describe the cryptograhic policies for RTP and RTCP, as well as -the SRTP master key and the SSRC value. The SSRC describes what to -protect (e.g. which stream), and the crypto_policy_t structures -describe how to protect it. The key is contained in a policy element -because it simplifies the interface to the library. In many cases, it -is desirable to use the same cryptographic policies across all of the -streams in a session, but to use a distinct key for each stream. A -crypto_policy_t structure can be initialized by using either the -crypto_policy_set_rtp_default() or crypto_policy_set_rtcp_default() -functions, which set a crypto policy structure to the default policies -for RTP and RTCP protection, respectively. - -@section Example Example Code - -This section provides a simple example of how to use libSRTP. The -example code lacks error checking, but is functional. Here we assume -that the value ssrc is already set to describe the SSRC of the stream -that we are sending, and that the functions get_rtp_packet() and -send_srtp_packet() are available to us. The former puts an RTP packet -into the buffer and returns the number of octets written to that -buffer. The latter sends the RTP packet in the buffer, given the -length as its second argument. - -@verbatim - srtp_t session; - srtp_policy_t policy; - uint8_t key[30]; - - // initialize libSRTP - srtp_init(); - - // set policy to describe a policy for an SRTP stream - crypto_policy_set_rtp_default(&policy.rtp); - crypto_policy_set_rtcp_default(&policy.rtcp); - policy.ssrc = ssrc; - policy.key = key; - policy.next = NULL; - - // set key to random value - crypto_get_random(key, 30); - - // allocate and initialize the SRTP session - srtp_create(&session, policy); - - // main loop: get rtp packets, send srtp packets - while (1) { - char rtp_buffer[2048]; - unsigned len; - - len = get_rtp_packet(rtp_buffer); - srtp_protect(session, rtp_buffer, &len); - send_srtp_packet(rtp_buffer, len); - } -@endverbatim - -@section ISMAcryp ISMA Encryption Support - -The Internet Streaming Media Alliance (ISMA) specifies a way -to pre-encrypt a media file prior to streaming. This method -is an alternative to SRTP encryption, which is potentially -useful when a particular media file will be streamed -multiple times. The specification is available online -at http://www.isma.tv/specreq.nsf/SpecRequest. - -libSRTP provides the encryption and decryption functions needed for ISMAcryp -in the library @t libaesicm.a, which is included in the default -Makefile target. This library is used by the MPEG4IP project; see -http://mpeg4ip.sourceforge.net/. - -Note that ISMAcryp does not provide authentication for -RTP nor RTCP, nor confidentiality for RTCP. -ISMAcryp RECOMMENDS the use of SRTP message authentication for ISMAcryp -streams while using ISMAcryp encryption to protect the media itself. - - - */ diff --git a/srtp/doc/libsrtp.pdf b/srtp/doc/libsrtp.pdf Binary files differdeleted file mode 100644 index 94ad008..0000000 --- a/srtp/doc/libsrtp.pdf +++ /dev/null diff --git a/srtp/doc/references.txt b/srtp/doc/references.txt deleted file mode 100644 index 2ec9d43..0000000 --- a/srtp/doc/references.txt +++ /dev/null @@ -1,21 +0,0 @@ -SRTP and ICM References -September, 2005 - -This document provides references for the various cryptographic -functions used in libSRTP and libaesicm. - -Secure RTP is defined in RFC 3711, which is included in this -distribution for convenience. The counter mode definition is in -Section 4.1.1 of the SRTP draft. - -SHA-1 is defined in FIPS-180-1, available online at the NIST website. - -HMAC is defined in RFC2104, and HMAC-SHA1 test vectors are available -in RFC2202, which are available online at http://www.ietf.org/rfc/ - -ICM is defined by draft-irtf-cfrg-icm-00.txt, and its application in -ISMAcryp (the Internet Streaming Media Alliance 1.0 Encryption and -Authentication) is defined in that specification. It is available -from http://www.isma.tv/. - - diff --git a/srtp/doc/rfc3711.txt b/srtp/doc/rfc3711.txt deleted file mode 100644 index ecc0648..0000000 --- a/srtp/doc/rfc3711.txt +++ /dev/null @@ -1,3139 +0,0 @@ - - - - - - -Network Working Group M. Baugher -Request for Comments: 3711 D. McGrew -Category: Standards Track Cisco Systems, Inc. - M. Naslund - E. Carrara - K. Norrman - Ericsson Research - March 2004 - - - The Secure Real-time Transport Protocol (SRTP) - -Status of this Memo - - This document specifies an Internet standards track protocol for the - Internet community, and requests discussion and suggestions for - improvements. Please refer to the current edition of the "Internet - Official Protocol Standards" (STD 1) for the standardization state - and status of this protocol. Distribution of this memo is unlimited. - -Copyright Notice - - Copyright (C) The Internet Society (2004). All Rights Reserved. - -Abstract - - This document describes the Secure Real-time Transport Protocol - (SRTP), a profile of the Real-time Transport Protocol (RTP), which - can provide confidentiality, message authentication, and replay - protection to the RTP traffic and to the control traffic for RTP, the - Real-time Transport Control Protocol (RTCP). - -Table of Contents - - 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3 - 2. Goals and Features . . . . . . . . . . . . . . . . . . . . . . 4 - 2.1. Features . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3. SRTP Framework . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3.1. Secure RTP . . . . . . . . . . . . . . . . . . . . . . . 6 - 3.2. SRTP Cryptographic Contexts. . . . . . . . . . . . . . . 7 - 3.2.1. Transform-independent parameters . . . . . . . . 8 - 3.2.2. Transform-dependent parameters . . . . . . . . . 10 - 3.2.3. Mapping SRTP Packets to Cryptographic Contexts . 10 - 3.3. SRTP Packet Processing . . . . . . . . . . . . . . . . . 11 - 3.3.1. Packet Index Determination, and ROC, s_l Update. 13 - 3.3.2. Replay Protection. . . . . . . . . . . . . . . . 15 - 3.4. Secure RTCP . . . . . . . . . . . . . . . . . . . . . . . 15 - - - -Baugher, et al. Standards Track [Page 1] - -RFC 3711 SRTP March 2004 - - - 4. Pre-Defined Cryptographic Transforms . . . . . . . . . . . . . 19 - 4.1. Encryption . . . . . . . . . . . . . . . . . . . . . . . 19 - 4.1.1. AES in Counter Mode. . . . . . . . . . . . . . . 21 - 4.1.2. AES in f8-mode . . . . . . . . . . . . . . . . . 22 - 4.1.3. NULL Cipher. . . . . . . . . . . . . . . . . . . 25 - 4.2. Message Authentication and Integrity . . . . . . . . . . 25 - 4.2.1. HMAC-SHA1. . . . . . . . . . . . . . . . . . . . 25 - 4.3. Key Derivation . . . . . . . . . . . . . . . . . . . . . 26 - 4.3.1. Key Derivation Algorithm . . . . . . . . . . . . 26 - 4.3.2. SRTCP Key Derivation . . . . . . . . . . . . . . 28 - 4.3.3. AES-CM PRF . . . . . . . . . . . . . . . . . . . 28 - 5. Default and mandatory-to-implement Transforms. . . . . . . . . 28 - 5.1. Encryption: AES-CM and NULL. . . . . . . . . . . . . . . 29 - 5.2. Message Authentication/Integrity: HMAC-SHA1. . . . . . . 29 - 5.3. Key Derivation: AES-CM PRF . . . . . . . . . . . . . . . 29 - 6. Adding SRTP Transforms . . . . . . . . . . . . . . . . . . . . 29 - 7. Rationale. . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 7.1. Key derivation . . . . . . . . . . . . . . . . . . . . . 30 - 7.2. Salting key. . . . . . . . . . . . . . . . . . . . . . . 30 - 7.3. Message Integrity from Universal Hashing . . . . . . . . 31 - 7.4. Data Origin Authentication Considerations. . . . . . . . 31 - 7.5. Short and Zero-length Message Authentication . . . . . . 32 - 8. Key Management Considerations. . . . . . . . . . . . . . . . . 33 - 8.1. Re-keying . . . . . . . . . . . . . . . . . . . . . . . 34 - 8.1.1. Use of the <From, To> for re-keying. . . . . . . 34 - 8.2. Key Management parameters. . . . . . . . . . . . . . . . 35 - 9. Security Considerations. . . . . . . . . . . . . . . . . . . . 37 - 9.1. SSRC collision and two-time pad. . . . . . . . . . . . . 37 - 9.2. Key Usage. . . . . . . . . . . . . . . . . . . . . . . . 38 - 9.3. Confidentiality of the RTP Payload . . . . . . . . . . . 39 - 9.4. Confidentiality of the RTP Header. . . . . . . . . . . . 40 - 9.5. Integrity of the RTP payload and header. . . . . . . . . 40 - 9.5.1. Risks of Weak or Null Message Authentication. . . 42 - 9.5.2. Implicit Header Authentication . . . . . . . . . 43 - 10. Interaction with Forward Error Correction mechanisms. . . . . 43 - 11. Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 11.1. Unicast. . . . . . . . . . . . . . . . . . . . . . . . . 43 - 11.2. Multicast (one sender) . . . . . . . . . . . . . . . . . 44 - 11.3. Re-keying and access control . . . . . . . . . . . . . . 45 - 11.4. Summary of basic scenarios . . . . . . . . . . . . . . . 46 - 12. IANA Considerations. . . . . . . . . . . . . . . . . . . . . . 46 - 13. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 47 - 14. References . . . . . . . . . . . . . . . . . . . . . . . . . . 47 - 14.1. Normative References . . . . . . . . . . . . . . . . . . 47 - 14.2. Informative References . . . . . . . . . . . . . . . . . 48 - Appendix A: Pseudocode for Index Determination . . . . . . . . . . 51 - Appendix B: Test Vectors . . . . . . . . . . . . . . . . . . . . . 51 - B.1. AES-f8 Test Vectors. . . . . . . . . . . . . . . . . . . 51 - - - -Baugher, et al. Standards Track [Page 2] - -RFC 3711 SRTP March 2004 - - - B.2. AES-CM Test Vectors. . . . . . . . . . . . . . . . . . . 52 - B.3. Key Derivation Test Vectors. . . . . . . . . . . . . . . 53 - Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 55 - Full Copyright Statement . . . . . . . . . . . . . . . . . . . . . 56 - -1. Introduction - - This document describes the Secure Real-time Transport Protocol - (SRTP), a profile of the Real-time Transport Protocol (RTP), which - can provide confidentiality, message authentication, and replay - protection to the RTP traffic and to the control traffic for RTP, - RTCP (the Real-time Transport Control Protocol) [RFC3350]. - - SRTP provides a framework for encryption and message authentication - of RTP and RTCP streams (Section 3). SRTP defines a set of default - cryptographic transforms (Sections 4 and 5), and it allows new - transforms to be introduced in the future (Section 6). With - appropriate key management (Sections 7 and 8), SRTP is secure - (Sections 9) for unicast and multicast RTP applications (Section 11). - - SRTP can achieve high throughput and low packet expansion. SRTP - proves to be a suitable protection for heterogeneous environments - (mix of wired and wireless networks). To get such features, default - transforms are described, based on an additive stream cipher for - encryption, a keyed-hash based function for message authentication, - and an "implicit" index for sequencing/synchronization based on the - RTP sequence number for SRTP and an index number for Secure RTCP - (SRTCP). - -1.1. Notational Conventions - - The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", - "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this - document are to be interpreted as described in [RFC2119]. The - terminology conforms to [RFC2828] with the following exception. For - simplicity we use the term "random" throughout the document to denote - randomly or pseudo-randomly generated values. Large amounts of - random bits may be difficult to obtain, and for the security of SRTP, - pseudo-randomness is sufficient [RFC1750]. - - By convention, the adopted representation is the network byte order, - i.e., the left most bit (octet) is the most significant one. By XOR - we mean bitwise addition modulo 2 of binary strings, and || denotes - concatenation. In other words, if C = A || B, then the most - significant bits of C are the bits of A, and the least significant - bits of C equal the bits of B. Hexadecimal numbers are prefixed by - 0x. - - - - -Baugher, et al. Standards Track [Page 3] - -RFC 3711 SRTP March 2004 - - - The word "encryption" includes also use of the NULL algorithm (which - in practice does leave the data in the clear). - - With slight abuse of notation, we use the terms "message - authentication" and "authentication tag" as is common practice, even - though in some circumstances, e.g., group communication, the service - provided is actually only integrity protection and not data origin - authentication. - -2. Goals and Features - - The security goals for SRTP are to ensure: - - * the confidentiality of the RTP and RTCP payloads, and - - * the integrity of the entire RTP and RTCP packets, together with - protection against replayed packets. - - These security services are optional and independent from each other, - except that SRTCP integrity protection is mandatory (malicious or - erroneous alteration of RTCP messages could otherwise disrupt the - processing of the RTP stream). - - Other, functional, goals for the protocol are: - - * a framework that permits upgrading with new cryptographic - transforms, - - * low bandwidth cost, i.e., a framework preserving RTP header - compression efficiency, - - and, asserted by the pre-defined transforms: - - * a low computational cost, - - * a small footprint (i.e., small code size and data memory for - keying information and replay lists), - - * limited packet expansion to support the bandwidth economy goal, - - * independence from the underlying transport, network, and physical - layers used by RTP, in particular high tolerance to packet loss - and re-ordering. - - These properties ensure that SRTP is a suitable protection scheme for - RTP/RTCP in both wired and wireless scenarios. - - - - - -Baugher, et al. Standards Track [Page 4] - -RFC 3711 SRTP March 2004 - - -2.1. Features - - Besides the above mentioned direct goals, SRTP provides for some - additional features. They have been introduced to lighten the burden - on key management and to further increase security. They include: - - * A single "master key" can provide keying material for - confidentiality and integrity protection, both for the SRTP stream - and the corresponding SRTCP stream. This is achieved with a key - derivation function (see Section 4.3), providing "session keys" - for the respective security primitive, securely derived from the - master key. - - * In addition, the key derivation can be configured to periodically - refresh the session keys, which limits the amount of ciphertext - produced by a fixed key, available for an adversary to - cryptanalyze. - - * "Salting keys" are used to protect against pre-computation and - time-memory tradeoff attacks [MF00] [BS00]. - - Detailed rationale for these features can be found in Section 7. - -3. SRTP Framework - - RTP is the Real-time Transport Protocol [RFC3550]. We define SRTP as - a profile of RTP. This profile is an extension to the RTP - Audio/Video Profile [RFC3551]. Except where explicitly noted, all - aspects of that profile apply, with the addition of the SRTP security - features. Conceptually, we consider SRTP to be a "bump in the stack" - implementation which resides between the RTP application and the - transport layer. SRTP intercepts RTP packets and then forwards an - equivalent SRTP packet on the sending side, and intercepts SRTP - packets and passes an equivalent RTP packet up the stack on the - receiving side. - - Secure RTCP (SRTCP) provides the same security services to RTCP as - SRTP does to RTP. SRTCP message authentication is MANDATORY and - thereby protects the RTCP fields to keep track of membership, provide - feedback to RTP senders, or maintain packet sequence counters. SRTCP - is described in Section 3.4. - - - - - - - - - - -Baugher, et al. Standards Track [Page 5] - -RFC 3711 SRTP March 2004 - - -3.1. Secure RTP - - The format of an SRTP packet is illustrated in Figure 1. - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<+ - |V=2|P|X| CC |M| PT | sequence number | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | timestamp | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | synchronization source (SSRC) identifier | | - +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | - | contributing source (CSRC) identifiers | | - | .... | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | RTP extension (OPTIONAL) | | - +>+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | | payload ... | | - | | +-------------------------------+ | - | | | RTP padding | RTP pad count | | - +>+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<+ - | ~ SRTP MKI (OPTIONAL) ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | : authentication tag (RECOMMENDED) : | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | | - +- Encrypted Portion* Authenticated Portion ---+ - - Figure 1. The format of an SRTP packet. *Encrypted Portion is the - same size as the plaintext for the Section 4 pre-defined transforms. - - The "Encrypted Portion" of an SRTP packet consists of the encryption - of the RTP payload (including RTP padding when present) of the - equivalent RTP packet. The Encrypted Portion MAY be the exact size - of the plaintext or MAY be larger. Figure 1 shows the RTP payload - including any possible padding for RTP [RFC3550]. - - None of the pre-defined encryption transforms uses any padding; for - these, the RTP and SRTP payload sizes match exactly. New transforms - added to SRTP (following Section 6) may require padding, and may - hence produce larger payloads. RTP provides its own padding format - (as seen in Fig. 1), which due to the padding indicator in the RTP - header has merits in terms of compactness relative to paddings using - prefix-free codes. This RTP padding SHALL be the default method for - transforms requiring padding. Transforms MAY specify other padding - methods, and MUST then specify the amount, format, and processing of - their padding. It is important to note that encryption transforms - - - -Baugher, et al. Standards Track [Page 6] - -RFC 3711 SRTP March 2004 - - - that use padding are vulnerable to subtle attacks, especially when - message authentication is not used [V02]. Each specification for a - new encryption transform needs to carefully consider and describe the - security implications of the padding that it uses. Message - authentication codes define their own padding, so this default does - not apply to authentication transforms. - - The OPTIONAL MKI and the RECOMMENDED authentication tag are the only - fields defined by SRTP that are not in RTP. Only 8-bit alignment is - assumed. - - MKI (Master Key Identifier): configurable length, OPTIONAL. The - MKI is defined, signaled, and used by key management. The - MKI identifies the master key from which the session - key(s) were derived that authenticate and/or encrypt the - particular packet. Note that the MKI SHALL NOT identify - the SRTP cryptographic context, which is identified - according to Section 3.2.3. The MKI MAY be used by key - management for the purposes of re-keying, identifying a - particular master key within the cryptographic context - (Section 3.2.1). - - Authentication tag: configurable length, RECOMMENDED. The - authentication tag is used to carry message authentication - data. The Authenticated Portion of an SRTP packet - consists of the RTP header followed by the Encrypted - Portion of the SRTP packet. Thus, if both encryption and - authentication are applied, encryption SHALL be applied - before authentication on the sender side and conversely on - the receiver side. The authentication tag provides - authentication of the RTP header and payload, and it - indirectly provides replay protection by authenticating - the sequence number. Note that the MKI is not integrity - protected as this does not provide any extra protection. - -3.2. SRTP Cryptographic Contexts - - Each SRTP stream requires the sender and receiver to maintain - cryptographic state information. This information is called the - "cryptographic context". - - SRTP uses two types of keys: session keys and master keys. By a - "session key", we mean a key which is used directly in a - cryptographic transform (e.g., encryption or message authentication), - and by a "master key", we mean a random bit string (given by the key - management protocol) from which session keys are derived in a - - - - - -Baugher, et al. Standards Track [Page 7] - -RFC 3711 SRTP March 2004 - - - cryptographically secure way. The master key(s) and other parameters - in the cryptographic context are provided by key management - mechanisms external to SRTP, see Section 8. - -3.2.1. Transform-independent parameters - - Transform-independent parameters are present in the cryptographic - context independently of the particular encryption or authentication - transforms that are used. The transform-independent parameters of - the cryptographic context for SRTP consist of: - - * a 32-bit unsigned rollover counter (ROC), which records how many - times the 16-bit RTP sequence number has been reset to zero after - passing through 65,535. Unlike the sequence number (SEQ), which - SRTP extracts from the RTP packet header, the ROC is maintained by - SRTP as described in Section 3.3.1. - - We define the index of the SRTP packet corresponding to a given - ROC and RTP sequence number to be the 48-bit quantity - - i = 2^16 * ROC + SEQ. - - * for the receiver only, a 16-bit sequence number s_l, which can be - thought of as the highest received RTP sequence number (see - Section 3.3.1 for its handling), which SHOULD be authenticated - since message authentication is RECOMMENDED, - - * an identifier for the encryption algorithm, i.e., the cipher and - its mode of operation, - - * an identifier for the message authentication algorithm, - - * a replay list, maintained by the receiver only (when - authentication and replay protection are provided), containing - indices of recently received and authenticated SRTP packets, - - * an MKI indicator (0/1) as to whether an MKI is present in SRTP and - SRTCP packets, - - * if the MKI indicator is set to one, the length (in octets) of the - MKI field, and (for the sender) the actual value of the currently - active MKI (the value of the MKI indicator and length MUST be kept - fixed for the lifetime of the context), - - * the master key(s), which MUST be random and kept secret, - - - - - - -Baugher, et al. Standards Track [Page 8] - -RFC 3711 SRTP March 2004 - - - * for each master key, there is a counter of the number of SRTP - packets that have been processed (sent) with that master key - (essential for security, see Sections 3.3.1 and 9), - - * non-negative integers n_e, and n_a, determining the length of the - session keys for encryption, and message authentication. - - In addition, for each master key, an SRTP stream MAY use the - following associated values: - - * a master salt, to be used in the key derivation of session keys. - This value, when used, MUST be random, but MAY be public. Use of - master salt is strongly RECOMMENDED, see Section 9.2. A "NULL" - salt is treated as 00...0. - - * an integer in the set {1,2,4,...,2^24}, the "key_derivation_rate", - where an unspecified value is treated as zero. The constraint to - be a power of 2 simplifies the session-key derivation - implementation, see Section 4.3. - - * an MKI value, - - * <From, To> values, specifying the lifetime for a master key, - expressed in terms of the two 48-bit index values inside whose - range (including the range end-points) the master key is valid. - For the use of <From, To>, see Section 8.1.1. <From, To> is an - alternative to the MKI and assumes that a master key is in one- - to-one correspondence with the SRTP session key on which the - <From, To> range is defined. - - SRTCP SHALL by default share the crypto context with SRTP, except: - - * no rollover counter and s_l-value need to be maintained as the - RTCP index is explicitly carried in each SRTCP packet, - - * a separate replay list is maintained (when replay protection is - provided), - - * SRTCP maintains a separate counter for its master key (even if the - master key is the same as that for SRTP, see below), as a means to - maintain a count of the number of SRTCP packets that have been - processed with that key. - - Note in particular that the master key(s) MAY be shared between SRTP - and the corresponding SRTCP, if the pre-defined transforms (including - the key derivation) are used but the session key(s) MUST NOT be so - shared. - - - - -Baugher, et al. Standards Track [Page 9] - -RFC 3711 SRTP March 2004 - - - In addition, there can be cases (see Sections 8 and 9.1) where - several SRTP streams within a given RTP session, identified by their - synchronization source (SSRCs, which is part of the RTP header), - share most of the crypto context parameters (including possibly - master and session keys). In such cases, just as in the normal - SRTP/SRTCP parameter sharing above, separate replay lists and packet - counters for each stream (SSRC) MUST still be maintained. Also, - separate SRTP indices MUST then be maintained. - - A summary of parameters, pre-defined transforms, and default values - for the above parameters (and other SRTP parameters) can be found in - Sections 5 and 8.2. - -3.2.2. Transform-dependent parameters - - All encryption, authentication/integrity, and key derivation - parameters are defined in the transforms section (Section 4). - Typical examples of such parameters are block size of ciphers, - session keys, data for the Initialization Vector (IV) formation, etc. - Future SRTP transform specifications MUST include a section to list - the additional cryptographic context's parameters for that transform, - if any. - -3.2.3. Mapping SRTP Packets to Cryptographic Contexts - - Recall that an RTP session for each participant is defined [RFC3550] - by a pair of destination transport addresses (one network address - plus a port pair for RTP and RTCP), and that a multimedia session is - defined as a collection of RTP sessions. For example, a particular - multimedia session could include an audio RTP session, a video RTP - session, and a text RTP session. - - A cryptographic context SHALL be uniquely identified by the triplet - context identifier: - - context id = <SSRC, destination network address, destination - transport port number> - - where the destination network address and the destination transport - port are the ones in the SRTP packet. It is assumed that, when - presented with this information, the key management returns a context - with the information as described in Section 3.2. - - As noted above, SRTP and SRTCP by default share the bulk of the - parameters in the cryptographic context. Thus, retrieving the crypto - context parameters for an SRTCP stream in practice may imply a - binding to the correspondent SRTP crypto context. It is up to the - implementation to assure such binding, since the RTCP port may not be - - - -Baugher, et al. Standards Track [Page 10] - -RFC 3711 SRTP March 2004 - - - directly deducible from the RTP port only. Alternatively, the key - management may choose to provide separate SRTP- and SRTCP- contexts, - duplicating the common parameters (such as master key(s)). The - latter approach then also enables SRTP and SRTCP to use, e.g., - distinct transforms, if so desired. Similar considerations arise - when multiple SRTP streams, forming part of one single RTP session, - share keys and other parameters. - - If no valid context can be found for a packet corresponding to a - certain context identifier, that packet MUST be discarded. - -3.3. SRTP Packet Processing - - The following applies to SRTP. SRTCP is described in Section 3.4. - - Assuming initialization of the cryptographic context(s) has taken - place via key management, the sender SHALL do the following to - construct an SRTP packet: - - 1. Determine which cryptographic context to use as described in - Section 3.2.3. - - 2. Determine the index of the SRTP packet using the rollover counter, - the highest sequence number in the cryptographic context, and the - sequence number in the RTP packet, as described in Section 3.3.1. - - 3. Determine the master key and master salt. This is done using the - index determined in the previous step or the current MKI in the - cryptographic context, according to Section 8.1. - - 4. Determine the session keys and session salt (if they are used by - the transform) as described in Section 4.3, using master key, - master salt, key_derivation_rate, and session key-lengths in the - cryptographic context with the index, determined in Steps 2 and 3. - - 5. Encrypt the RTP payload to produce the Encrypted Portion of the - packet (see Section 4.1, for the defined ciphers). This step uses - the encryption algorithm indicated in the cryptographic context, - the session encryption key and the session salt (if used) found in - Step 4 together with the index found in Step 2. - - 6. If the MKI indicator is set to one, append the MKI to the packet. - - 7. For message authentication, compute the authentication tag for the - Authenticated Portion of the packet, as described in Section 4.2. - This step uses the current rollover counter, the authentication - - - - - -Baugher, et al. Standards Track [Page 11] - -RFC 3711 SRTP March 2004 - - - algorithm indicated in the cryptographic context, and the session - authentication key found in Step 4. Append the authentication tag - to the packet. - - 8. If necessary, update the ROC as in Section 3.3.1, using the packet - index determined in Step 2. - - To authenticate and decrypt an SRTP packet, the receiver SHALL do the - following: - - 1. Determine which cryptographic context to use as described in - Section 3.2.3. - - 2. Run the algorithm in Section 3.3.1 to get the index of the SRTP - packet. The algorithm uses the rollover counter and highest - sequence number in the cryptographic context with the sequence - number in the SRTP packet, as described in Section 3.3.1. - - 3. Determine the master key and master salt. If the MKI indicator in - the context is set to one, use the MKI in the SRTP packet, - otherwise use the index from the previous step, according to - Section 8.1. - - 4. Determine the session keys, and session salt (if used by the - transform) as described in Section 4.3, using master key, master - salt, key_derivation_rate and session key-lengths in the - cryptographic context with the index, determined in Steps 2 and 3. - - 5. For message authentication and replay protection, first check if - the packet has been replayed (Section 3.3.2), using the Replay - List and the index as determined in Step 2. If the packet is - judged to be replayed, then the packet MUST be discarded, and the - event SHOULD be logged. - - Next, perform verification of the authentication tag, using the - rollover counter from Step 2, the authentication algorithm - indicated in the cryptographic context, and the session - authentication key from Step 4. If the result is "AUTHENTICATION - FAILURE" (see Section 4.2), the packet MUST be discarded from - further processing and the event SHOULD be logged. - - 6. Decrypt the Encrypted Portion of the packet (see Section 4.1, for - the defined ciphers), using the decryption algorithm indicated in - the cryptographic context, the session encryption key and salt (if - used) found in Step 4 with the index from Step 2. - - - - - - -Baugher, et al. Standards Track [Page 12] - -RFC 3711 SRTP March 2004 - - - 7. Update the rollover counter and highest sequence number, s_l, in - the cryptographic context as in Section 3.3.1, using the packet - index estimated in Step 2. If replay protection is provided, also - update the Replay List as described in Section 3.3.2. - - 8. When present, remove the MKI and authentication tag fields from - the packet. - -3.3.1. Packet Index Determination, and ROC, s_l Update - - SRTP implementations use an "implicit" packet index for sequencing, - i.e., not all of the index is explicitly carried in the SRTP packet. - For the pre-defined transforms, the index i is used in replay - protection (Section 3.3.2), encryption (Section 4.1), message - authentication (Section 4.2), and for the key derivation (Section - 4.3). - - When the session starts, the sender side MUST set the rollover - counter, ROC, to zero. Each time the RTP sequence number, SEQ, wraps - modulo 2^16, the sender side MUST increment ROC by one, modulo 2^32 - (see security aspects below). The sender's packet index is then - defined as - - i = 2^16 * ROC + SEQ. - - Receiver-side implementations use the RTP sequence number to - determine the correct index of a packet, which is the location of the - packet in the sequence of all SRTP packets. A robust approach for - the proper use of a rollover counter requires its handling and use to - be well defined. In particular, out-of-order RTP packets with - sequence numbers close to 2^16 or zero must be properly handled. - - The index estimate is based on the receiver's locally maintained ROC - and s_l values. At the setup of the session, the ROC MUST be set to - zero. Receivers joining an on-going session MUST be given the - current ROC value using out-of-band signaling such as key-management - signaling. Furthermore, the receiver SHALL initialize s_l to the RTP - sequence number (SEQ) of the first observed SRTP packet (unless the - initial value is provided by out of band signaling such as key - management). - - On consecutive SRTP packets, the receiver SHOULD estimate the index - as - i = 2^16 * v + SEQ, - - where v is chosen from the set { ROC-1, ROC, ROC+1 } (modulo 2^32) - such that i is closest (in modulo 2^48 sense) to the value 2^16 * ROC - + s_l (see Appendix A for pseudocode). - - - -Baugher, et al. Standards Track [Page 13] - -RFC 3711 SRTP March 2004 - - - After the packet has been processed and authenticated (when enabled - for SRTP packets for the session), the receiver MUST use v to - conditionally update its s_l and ROC variables as follows. If - v=(ROC-1) mod 2^32, then there is no update to s_l or ROC. If v=ROC, - then s_l is set to SEQ if and only if SEQ is larger than the current - s_l; there is no change to ROC. If v=(ROC+1) mod 2^32, then s_l is - set to SEQ and ROC is set to v. - - After a re-keying occurs (changing to a new master key), the rollover - counter always maintains its sequence of values, i.e., it MUST NOT be - reset to zero. - - As the rollover counter is 32 bits long and the sequence number is 16 - bits long, the maximum number of packets belonging to a given SRTP - stream that can be secured with the same key is 2^48 using the pre- - defined transforms. After that number of SRTP packets have been sent - with a given (master or session) key, the sender MUST NOT send any - more packets with that key. (There exists a similar limit for SRTCP, - which in practice may be more restrictive, see Section 9.2.) This - limitation enforces a security benefit by providing an upper bound on - the amount of traffic that can pass before cryptographic keys are - changed. Re-keying (see Section 8.1) MUST be triggered, before this - amount of traffic, and MAY be triggered earlier, e.g., for increased - security and access control to media. Recurring key derivation by - means of a non-zero key_derivation_rate (see Section 4.3), also gives - stronger security but does not change the above absolute maximum - value. - - On the receiver side, there is a caveat to updating s_l and ROC: if - message authentication is not present, neither the initialization of - s_l, nor the ROC update can be made completely robust. The - receiver's "implicit index" approach works for the pre-defined - transforms as long as the reorder and loss of the packets are not too - great and bit-errors do not occur in unfortunate ways. In - particular, 2^15 packets would need to be lost, or a packet would - need to be 2^15 packets out of sequence before synchronization is - lost. Such drastic loss or reorder is likely to disrupt the RTP - application itself. - - The algorithm for the index estimate and ROC update is a matter of - implementation, and should take into consideration the environment - (e.g., packet loss rate) and the cases when synchronization is likely - to be lost, e.g., when the initial sequence number (randomly chosen - by RTP) is not known in advance (not sent in the key management - protocol) but may be near to wrap modulo 2^16. - - - - - - -Baugher, et al. Standards Track [Page 14] - -RFC 3711 SRTP March 2004 - - - A more elaborate and more robust scheme than the one given above is - the handling of RTP's own "rollover counter", see Appendix A.1 of - [RFC3550]. - -3.3.2. Replay Protection - - Secure replay protection is only possible when integrity protection - is present. It is RECOMMENDED to use replay protection, both for RTP - and RTCP, as integrity protection alone cannot assure security - against replay attacks. - - A packet is "replayed" when it is stored by an adversary, and then - re-injected into the network. When message authentication is - provided, SRTP protects against such attacks through a Replay List. - Each SRTP receiver maintains a Replay List, which conceptually - contains the indices of all of the packets which have been received - and authenticated. In practice, the list can use a "sliding window" - approach, so that a fixed amount of storage suffices for replay - protection. Packet indices which lag behind the packet index in the - context by more than SRTP-WINDOW-SIZE can be assumed to have been - received, where SRTP-WINDOW-SIZE is a receiver-side, implementation- - dependent parameter and MUST be at least 64, but which MAY be set to - a higher value. - - The receiver checks the index of an incoming packet against the - replay list and the window. Only packets with index ahead of the - window, or, inside the window but not already received, SHALL be - accepted. - - After the packet has been authenticated (if necessary the window is - first moved ahead), the replay list SHALL be updated with the new - index. - - The Replay List can be efficiently implemented by using a bitmap to - represent which packets have been received, as described in the - Security Architecture for IP [RFC2401]. - -3.4. Secure RTCP - - Secure RTCP follows the definition of Secure RTP. SRTCP adds three - mandatory new fields (the SRTCP index, an "encrypt-flag", and the - authentication tag) and one optional field (the MKI) to the RTCP - packet definition. The three mandatory fields MUST be appended to an - RTCP packet in order to form an equivalent SRTCP packet. The added - fields follow any other profile-specific extensions. - - - - - - -Baugher, et al. Standards Track [Page 15] - -RFC 3711 SRTP March 2004 - - - According to Section 6.1 of [RFC3550], there is a REQUIRED packet - format for compound packets. SRTCP MUST be given packets according - to that requirement in the sense that the first part MUST be a sender - report or a receiver report. However, the RTCP encryption prefix (a - random 32-bit quantity) specified in that Section MUST NOT be used - since, as is stated there, it is only applicable to the encryption - method specified in [RFC3550] and is not needed by the cryptographic - mechanisms used in SRTP. - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<+ - |V=2|P| RC | PT=SR or RR | length | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | SSRC of sender | | - +>+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | - | ~ sender info ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | ~ report block 1 ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | ~ report block 2 ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | ~ ... ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | |V=2|P| SC | PT=SDES=202 | length | | - | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | - | | SSRC/CSRC_1 | | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | ~ SDES items ~ | - | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | - | ~ ... ~ | - +>+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | - | |E| SRTCP index | | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<+ - | ~ SRTCP MKI (OPTIONAL) ~ | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | : authentication tag : | - | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | - | | - +-- Encrypted Portion Authenticated Portion -----+ - - - Figure 2. An example of the format of a Secure RTCP packet, - consisting of an underlying RTCP compound packet with a Sender Report - and SDES packet. - - - - - - -Baugher, et al. Standards Track [Page 16] - -RFC 3711 SRTP March 2004 - - - The Encrypted Portion of an SRTCP packet consists of the encryption - (Section 4.1) of the RTCP payload of the equivalent compound RTCP - packet, from the first RTCP packet, i.e., from the ninth (9) octet to - the end of the compound packet. The Authenticated Portion of an - SRTCP packet consists of the entire equivalent (eventually compound) - RTCP packet, the E flag, and the SRTCP index (after any encryption - has been applied to the payload). - - The added fields are: - - E-flag: 1 bit, REQUIRED - The E-flag indicates if the current SRTCP packet is - encrypted or unencrypted. Section 9.1 of [RFC3550] allows - the split of a compound RTCP packet into two lower-layer - packets, one to be encrypted and one to be sent in the - clear. The E bit set to "1" indicates encrypted packet, and - "0" indicates non-encrypted packet. - - SRTCP index: 31 bits, REQUIRED - The SRTCP index is a 31-bit counter for the SRTCP packet. - The index is explicitly included in each packet, in contrast - to the "implicit" index approach used for SRTP. The SRTCP - index MUST be set to zero before the first SRTCP packet is - sent, and MUST be incremented by one, modulo 2^31, after - each SRTCP packet is sent. In particular, after a re-key, - the SRTCP index MUST NOT be reset to zero again. - - Authentication Tag: configurable length, REQUIRED - The authentication tag is used to carry message - authentication data. - - MKI: configurable length, OPTIONAL - The MKI is the Master Key Indicator, and functions according - to the MKI definition in Section 3. - - SRTCP uses the cryptographic context parameters and packet processing - of SRTP by default, with the following changes: - - * The receiver does not need to "estimate" the index, as it is - explicitly signaled in the packet. - - * Pre-defined SRTCP encryption is as specified in Section 4.1, but - using the definition of the SRTCP Encrypted Portion given in this - section, and using the SRTCP index as the index i. The encryption - transform and related parameters SHALL by default be the same - selected for the protection of the associated SRTP stream(s), - while the NULL algorithm SHALL be applied to the RTCP packets not - to be encrypted. SRTCP may have a different encryption transform - - - -Baugher, et al. Standards Track [Page 17] - -RFC 3711 SRTP March 2004 - - - than the one used by the corresponding SRTP. The expected use for - this feature is when the former has NULL-encryption and the latter - has a non NULL-encryption. - - The E-flag is assigned a value by the sender depending on whether the - packet was encrypted or not. - - * SRTCP decryption is performed as in Section 4, but only if the E - flag is equal to 1. If so, the Encrypted Portion is decrypted, - using the SRTCP index as the index i. In case the E-flag is 0, - the payload is simply left unmodified. - - * SRTCP replay protection is as defined in Section 3.3.2, but using - the SRTCP index as the index i and a separate Replay List that is - specific to SRTCP. - - * The pre-defined SRTCP authentication tag is specified as in - Section 4.2, but with the Authenticated Portion of the SRTCP - packet given in this section (which includes the index). The - authentication transform and related parameters (e.g., key size) - SHALL by default be the same as selected for the protection of the - associated SRTP stream(s). - - * In the last step of the processing, only the sender needs to - update the value of the SRTCP index by incrementing it modulo 2^31 - and for security reasons the sender MUST also check the number of - SRTCP packets processed, see Section 9.2. - - Message authentication for RTCP is REQUIRED, as it is the control - protocol (e.g., it has a BYE packet) for RTP. - - Precautions must be taken so that the packet expansion in SRTCP (due - to the added fields) does not cause SRTCP messages to use more than - their share of RTCP bandwidth. To avoid this, the following two - measures MUST be taken: - - 1. When initializing the RTCP variable "avg_rtcp_size" defined in - chapter 6.3 of [RFC3550], it MUST include the size of the fields - that will be added by SRTCP (index, E-bit, authentication tag, and - when present, the MKI). - - 2. When updating the "avg_rtcp_size" using the variable "packet_size" - (section 6.3.3 of [RFC3550]), the value of "packet_size" MUST - include the size of the additional fields added by SRTCP. - - - - - - - -Baugher, et al. Standards Track [Page 18] - -RFC 3711 SRTP March 2004 - - - With these measures in place the SRTCP messages will not use more - than the allotted bandwidth. The effect of the size of the added - fields on the SRTCP traffic will be that messages will be sent with - longer packet intervals. The increase in the intervals will be - directly proportional to size of the added fields. For the pre- - defined transforms, the size of the added fields will be at least 14 - octets, and upper bounded depending on MKI and the authentication tag - sizes. - -4. Pre-Defined Cryptographic Transforms - - While there are numerous encryption and message authentication - algorithms that can be used in SRTP, below we define default - algorithms in order to avoid the complexity of specifying the - encodings for the signaling of algorithm and parameter identifiers. - The defined algorithms have been chosen as they fulfill the goals - listed in Section 2. Recommendations on how to extend SRTP with new - transforms are given in Section 6. - -4.1. Encryption - - The following parameters are common to both pre-defined, non-NULL, - encryption transforms specified in this section. - - * BLOCK_CIPHER-MODE indicates the block cipher used and its mode of - operation - * n_b is the bit-size of the block for the block cipher - * k_e is the session encryption key - * n_e is the bit-length of k_e - * k_s is the session salting key - * n_s is the bit-length of k_s - * SRTP_PREFIX_LENGTH is the octet length of the keystream prefix, a - non-negative integer, specified by the message authentication code - in use. - - The distinct session keys and salts for SRTP/SRTCP are by default - derived as specified in Section 4.3. - - The encryption transforms defined in SRTP map the SRTP packet index - and secret key into a pseudo-random keystream segment. Each - keystream segment encrypts a single RTP packet. The process of - encrypting a packet consists of generating the keystream segment - corresponding to the packet, and then bitwise exclusive-oring that - keystream segment onto the payload of the RTP packet to produce the - Encrypted Portion of the SRTP packet. In case the payload size is - not an integer multiple of n_b bits, the excess (least significant) - bits of the keystream are simply discarded. Decryption is done the - same way, but swapping the roles of the plaintext and ciphertext. - - - -Baugher, et al. Standards Track [Page 19] - -RFC 3711 SRTP March 2004 - - - +----+ +------------------+---------------------------------+ - | KG |-->| Keystream Prefix | Keystream Suffix |---+ - +----+ +------------------+---------------------------------+ | - | - +---------------------------------+ v - | Payload of RTP Packet |->(*) - +---------------------------------+ | - | - +---------------------------------+ | - | Encrypted Portion of SRTP Packet|<--+ - +---------------------------------+ - - Figure 3: Default SRTP Encryption Processing. Here KG denotes the - keystream generator, and (*) denotes bitwise exclusive-or. - - The definition of how the keystream is generated, given the index, - depends on the cipher and its mode of operation. Below, two such - keystream generators are defined. The NULL cipher is also defined, - to be used when encryption of RTP is not required. - - The SRTP definition of the keystream is illustrated in Figure 3. The - initial octets of each keystream segment MAY be reserved for use in a - message authentication code, in which case the keystream used for - encryption starts immediately after the last reserved octet. The - initial reserved octets are called the "keystream prefix" (not to be - confused with the "encryption prefix" of [RFC3550, Section 6.1]), and - the remaining octets are called the "keystream suffix". The - keystream prefix MUST NOT be used for encryption. The process is - illustrated in Figure 3. - - The number of octets in the keystream prefix is denoted as - SRTP_PREFIX_LENGTH. The keystream prefix is indicated by a positive, - non-zero value of SRTP_PREFIX_LENGTH. This means that, even if - confidentiality is not to be provided, the keystream generator output - may still need to be computed for packet authentication, in which - case the default keystream generator (mode) SHALL be used. - - The default cipher is the Advanced Encryption Standard (AES) [AES], - and we define two modes of running AES, (1) Segmented Integer Counter - Mode AES and (2) AES in f8-mode. In the remainder of this section, - let E(k,x) be AES applied to key k and input block x. - - - - - - - - - - -Baugher, et al. Standards Track [Page 20] - -RFC 3711 SRTP March 2004 - - -4.1.1. AES in Counter Mode - - Conceptually, counter mode [AES-CTR] consists of encrypting - successive integers. The actual definition is somewhat more - complicated, in order to randomize the starting point of the integer - sequence. Each packet is encrypted with a distinct keystream - segment, which SHALL be computed as follows. - - A keystream segment SHALL be the concatenation of the 128-bit output - blocks of the AES cipher in the encrypt direction, using key k = k_e, - in which the block indices are in increasing order. Symbolically, - each keystream segment looks like - - E(k, IV) || E(k, IV + 1 mod 2^128) || E(k, IV + 2 mod 2^128) ... - - where the 128-bit integer value IV SHALL be defined by the SSRC, the - SRTP packet index i, and the SRTP session salting key k_s, as below. - - IV = (k_s * 2^16) XOR (SSRC * 2^64) XOR (i * 2^16) - - Each of the three terms in the XOR-sum above is padded with as many - leading zeros as needed to make the operation well-defined, - considered as a 128-bit value. - - The inclusion of the SSRC allows the use of the same key to protect - distinct SRTP streams within the same RTP session, see the security - caveats in Section 9.1. - - In the case of SRTCP, the SSRC of the first header of the compound - packet MUST be used, i SHALL be the 31-bit SRTCP index and k_e, k_s - SHALL be replaced by the SRTCP encryption session key and salt. - - Note that the initial value, IV, is fixed for each packet and is - formed by "reserving" 16 zeros in the least significant bits for the - purpose of the counter. The number of blocks of keystream generated - for any fixed value of IV MUST NOT exceed 2^16 to avoid keystream - re-use, see below. The AES has a block size of 128 bits, so 2^16 - output blocks are sufficient to generate the 2^23 bits of keystream - needed to encrypt the largest possible RTP packet (except for IPv6 - "jumbograms" [RFC2675], which are not likely to be used for RTP-based - multimedia traffic). This restriction on the maximum bit-size of the - packet that can be encrypted ensures the security of the encryption - method by limiting the effectiveness of probabilistic attacks [BDJR]. - - For a particular Counter Mode key, each IV value used as an input - MUST be distinct, in order to avoid the security exposure of a two- - time pad situation (Section 9.1). To satisfy this constraint, an - implementation MUST ensure that the combination of the SRTP packet - - - -Baugher, et al. Standards Track [Page 21] - -RFC 3711 SRTP March 2004 - - - index of ROC || SEQ, and the SSRC used in the construction of the IV - are distinct for any particular key. The failure to ensure this - uniqueness could be catastrophic for Secure RTP. This is in contrast - to the situation for RTP itself, which may be able to tolerate such - failures. It is RECOMMENDED that, if a dedicated security module is - present, the RTP sequence numbers and SSRC either be generated or - checked by that module (i.e., sequence-number and SSRC processing in - an SRTP system needs to be protected as well as the key). - -4.1.2. AES in f8-mode - - To encrypt UMTS (Universal Mobile Telecommunications System, as 3G - networks) data, a solution (see [f8-a] [f8-b]) known as the f8- - algorithm has been developed. On a high level, the proposed scheme - is a variant of Output Feedback Mode (OFB) [HAC], with a more - elaborate initialization and feedback function. As in normal OFB, - the core consists of a block cipher. We also define here the use of - AES as a block cipher to be used in what we shall call "f8-mode of - operation" RTP encryption. The AES f8-mode SHALL use the same - default sizes for session key and salt as AES counter mode. - - Figure 4 shows the structure of block cipher, E, running in f8-mode. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Baugher, et al. Standards Track [Page 22] - -RFC 3711 SRTP March 2004 - - - IV - | - v - +------+ - | | - +--->| E | - | +------+ - | | - m -> (*) +-----------+-------------+-- ... ------+ - | IV' | | | | - | | j=1 -> (*) j=2 -> (*) ... j=L-1 ->(*) - | | | | | - | | +-> (*) +-> (*) ... +-> (*) - | | | | | | | | - | v | v | v | v - | +------+ | +------+ | +------+ | +------+ - k_e ---+--->| E | | | E | | | E | | | E | - | | | | | | | | | | | - +------+ | +------+ | +------+ | +------+ - | | | | | | | - +------+ +--------+ +-- ... ----+ | - | | | | - v v v v - S(0) S(1) S(2) . . . S(L-1) - - Figure 4. f8-mode of operation (asterisk, (*), denotes bitwise XOR). - The figure represents the KG in Figure 3, when AES-f8 is used. - -4.1.2.1. f8 Keystream Generation - - The Initialization Vector (IV) SHALL be determined as described in - Section 4.1.2.2 (and in Section 4.1.2.3 for SRTCP). - - Let IV', S(j), and m denote n_b-bit blocks. The keystream, - S(0) ||... || S(L-1), for an N-bit message SHALL be defined by - setting IV' = E(k_e XOR m, IV), and S(-1) = 00..0. For - j = 0,1,..,L-1 where L = N/n_b (rounded up to nearest integer if it - is not already an integer) compute - - S(j) = E(k_e, IV' XOR j XOR S(j-1)) - - Notice that the IV is not used directly. Instead it is fed through E - under another key to produce an internal, "masked" value (denoted - IV') to prevent an attacker from gaining known input/output pairs. - - - - - - - -Baugher, et al. Standards Track [Page 23] - -RFC 3711 SRTP March 2004 - - - The role of the internal counter, j, is to prevent short keystream - cycles. The value of the key mask m SHALL be - - m = k_s || 0x555..5, - - i.e., the session salting key, appended by the binary pattern 0101.. - to fill out the entire desired key size, n_e. - - The sender SHOULD NOT generate more than 2^32 blocks, which is - sufficient to generate 2^39 bits of keystream. Unlike counter mode, - there is no absolute threshold above (below) which f8 is guaranteed - to be insecure (secure). The above bound has been chosen to limit, - with sufficient security margin, the probability of degenerative - behavior in the f8 keystream generation. - -4.1.2.2. f8 SRTP IV Formation - - The purpose of the following IV formation is to provide a feature - which we call implicit header authentication (IHA), see Section 9.5. - - The SRTP IV for 128-bit block AES-f8 SHALL be formed in the following - way: - - IV = 0x00 || M || PT || SEQ || TS || SSRC || ROC - - M, PT, SEQ, TS, SSRC SHALL be taken from the RTP header; ROC is from - the cryptographic context. - - The presence of the SSRC as part of the IV allows AES-f8 to be used - when a master key is shared between multiple streams within the same - RTP session, see Section 9.1. - -4.1.2.3. f8 SRTCP IV Formation - - The SRTCP IV for 128-bit block AES-f8 SHALL be formed in the - following way: - - IV= 0..0 || E || SRTCP index || V || P || RC || PT || length || SSRC - - where V, P, RC, PT, length, SSRC SHALL be taken from the first header - in the RTCP compound packet. E and SRTCP index are the 1-bit and - 31-bit fields added to the packet. - - - - - - - - - -Baugher, et al. Standards Track [Page 24] - -RFC 3711 SRTP March 2004 - - -4.1.3. NULL Cipher - - The NULL cipher is used when no confidentiality for RTP/RTCP is - requested. The keystream can be thought of as "000..0", i.e., the - encryption SHALL simply copy the plaintext input into the ciphertext - output. - -4.2. Message Authentication and Integrity - - Throughout this section, M will denote data to be integrity - protected. In the case of SRTP, M SHALL consist of the Authenticated - Portion of the packet (as specified in Figure 1) concatenated with - the ROC, M = Authenticated Portion || ROC; in the case of SRTCP, M - SHALL consist of the Authenticated Portion (as specified in Figure 2) - only. - - Common parameters: - - * AUTH_ALG is the authentication algorithm - * k_a is the session message authentication key - * n_a is the bit-length of the authentication key - * n_tag is the bit-length of the output authentication tag - * SRTP_PREFIX_LENGTH is the octet length of the keystream prefix as - defined above, a parameter of AUTH_ALG - - The distinct session authentication keys for SRTP/SRTCP are by - default derived as specified in Section 4.3. - - The values of n_a, n_tag, and SRTP_PREFIX_LENGTH MUST be fixed for - any particular fixed value of the key. - - We describe the process of computing authentication tags as follows. - The sender computes the tag of M and appends it to the packet. The - SRTP receiver verifies a message/authentication tag pair by computing - a new authentication tag over M using the selected algorithm and key, - and then compares it to the tag associated with the received message. - If the two tags are equal, then the message/tag pair is valid; - otherwise, it is invalid and the error audit message "AUTHENTICATION - FAILURE" MUST be returned. - -4.2.1. HMAC-SHA1 - - The pre-defined authentication transform for SRTP is HMAC-SHA1 - [RFC2104]. With HMAC-SHA1, the SRTP_PREFIX_LENGTH (Figure 3) SHALL - be 0. For SRTP (respectively SRTCP), the HMAC SHALL be applied to - the session authentication key and M as specified above, i.e., - HMAC(k_a, M). The HMAC output SHALL then be truncated to the n_tag - left-most bits. - - - -Baugher, et al. Standards Track [Page 25] - -RFC 3711 SRTP March 2004 - - -4.3. Key Derivation - -4.3.1. Key Derivation Algorithm - - Regardless of the encryption or message authentication transform that - is employed (it may be an SRTP pre-defined transform or newly - introduced according to Section 6), interoperable SRTP - implementations MUST use the SRTP key derivation to generate session - keys. Once the key derivation rate is properly signaled at the start - of the session, there is no need for extra communication between the - parties that use SRTP key derivation. - - packet index ---+ - | - v - +-----------+ master +--------+ session encr_key - | ext | key | |----------> - | key mgmt |-------->| key | session auth_key - | (optional | | deriv |----------> - | rekey) |-------->| | session salt_key - | | master | |----------> - +-----------+ salt +--------+ - - Figure 5: SRTP key derivation. - - At least one initial key derivation SHALL be performed by SRTP, i.e., - the first key derivation is REQUIRED. Further applications of the - key derivation MAY be performed, according to the - "key_derivation_rate" value in the cryptographic context. The key - derivation function SHALL initially be invoked before the first - packet and then, when r > 0, a key derivation is performed whenever - index mod r equals zero. This can be thought of as "refreshing" the - session keys. The value of "key_derivation_rate" MUST be kept fixed - for the lifetime of the associated master key. - - Interoperable SRTP implementations MAY also derive session salting - keys for encryption transforms, as is done in both of the pre- - defined transforms. - - Let m and n be positive integers. A pseudo-random function family is - a set of keyed functions {PRF_n(k,x)} such that for the (secret) - random key k, given m-bit x, PRF_n(k,x) is an n-bit string, - computationally indistinguishable from random n-bit strings, see - [HAC]. For the purpose of key derivation in SRTP, a secure PRF with - m = 128 (or more) MUST be used, and a default PRF transform is - defined in Section 4.3.3. - - - - - -Baugher, et al. Standards Track [Page 26] - -RFC 3711 SRTP March 2004 - - - Let "a DIV t" denote integer division of a by t, rounded down, and - with the convention that "a DIV 0 = 0" for all a. We also make the - convention of treating "a DIV t" as a bit string of the same length - as a, and thus "a DIV t" will in general have leading zeros. - - Key derivation SHALL be defined as follows in terms of <label>, an - 8-bit constant (see below), master_salt and key_derivation_rate, as - determined in the cryptographic context, and index, the packet index - (i.e., the 48-bit ROC || SEQ for SRTP): - - * Let r = index DIV key_derivation_rate (with DIV as defined above). - - * Let key_id = <label> || r. - - * Let x = key_id XOR master_salt, where key_id and master_salt are - aligned so that their least significant bits agree (right- - alignment). - - <label> MUST be unique for each type of key to be derived. We - currently define <label> 0x00 to 0x05 (see below), and future - extensions MAY specify new values in the range 0x06 to 0xff for other - purposes. The n-bit SRTP key (or salt) for this packet SHALL then be - derived from the master key, k_master as follows: - - PRF_n(k_master, x). - - (The PRF may internally specify additional formatting and padding of - x, see e.g., Section 4.3.3 for the default PRF.) - - The session keys and salt SHALL now be derived using: - - - k_e (SRTP encryption): <label> = 0x00, n = n_e. - - - k_a (SRTP message authentication): <label> = 0x01, n = n_a. - - - k_s (SRTP salting key): <label> = 0x02, n = n_s. - - where n_e, n_s, and n_a are from the cryptographic context. - - The master key and master salt MUST be random, but the master salt - MAY be public. - - Note that for a key_derivation_rate of 0, the application of the key - derivation SHALL take place exactly once. - - The definition of DIV above is purely for notational convenience. - For a non-zero t among the set of allowed key derivation rates, "a - DIV t" can be implemented as a right-shift by the base-2 logarithm of - - - -Baugher, et al. Standards Track [Page 27] - -RFC 3711 SRTP March 2004 - - - t. The derivation operation is further facilitated if the rates are - chosen to be powers of 256, but that granularity was considered too - coarse to be a requirement of this specification. - - The upper limit on the number of packets that can be secured using - the same master key (see Section 9.2) is independent of the key - derivation. - -4.3.2. SRTCP Key Derivation - - SRTCP SHALL by default use the same master key (and master salt) as - SRTP. To do this securely, the following changes SHALL be done to - the definitions in Section 4.3.1 when applying session key derivation - for SRTCP. - - Replace the SRTP index by the 32-bit quantity: 0 || SRTCP index - (i.e., excluding the E-bit, replacing it with a fixed 0-bit), and use - <label> = 0x03 for the SRTCP encryption key, <label> = 0x04 for the - SRTCP authentication key, and, <label> = 0x05 for the SRTCP salting - key. - -4.3.3. AES-CM PRF - - The currently defined PRF, keyed by 128, 192, or 256 bit master key, - has input block size m = 128 and can produce n-bit outputs for n up - to 2^23. PRF_n(k_master,x) SHALL be AES in Counter Mode as described - in Section 4.1.1, applied to key k_master, and IV equal to (x*2^16), - and with the output keystream truncated to the n first (left-most) - bits. (Requiring n/128, rounded up, applications of AES.) - -5. Default and mandatory-to-implement Transforms - - The default transforms also are mandatory-to-implement transforms in - SRTP. Of course, "mandatory-to-implement" does not imply - "mandatory-to-use". Table 1 summarizes the pre-defined transforms. - The default values below are valid for the pre-defined transforms. - - mandatory-to-impl. optional default - - encryption AES-CM, NULL AES-f8 AES-CM - message integrity HMAC-SHA1 - HMAC-SHA1 - key derivation (PRF) AES-CM - AES-CM - - Table 1: Mandatory-to-implement, optional and default transforms in - SRTP and SRTCP. - - - - - - -Baugher, et al. Standards Track [Page 28] - -RFC 3711 SRTP March 2004 - - -5.1. Encryption: AES-CM and NULL - - AES running in Segmented Integer Counter Mode, as defined in Section - 4.1.1, SHALL be the default encryption algorithm. The default key - lengths SHALL be 128-bit for the session encryption key (n_e). The - default session salt key-length (n_s) SHALL be 112 bits. - - The NULL cipher SHALL also be mandatory-to-implement. - -5.2. Message Authentication/Integrity: HMAC-SHA1 - - HMAC-SHA1, as defined in Section 4.2.1, SHALL be the default message - authentication code. The default session authentication key-length - (n_a) SHALL be 160 bits, the default authentication tag length - (n_tag) SHALL be 80 bits, and the SRTP_PREFIX_LENGTH SHALL be zero - for HMAC-SHA1. In addition, for SRTCP, the pre-defined HMAC-SHA1 - MUST NOT be applied with a value of n_tag, nor n_a, that are smaller - than these defaults. For SRTP, smaller values are NOT RECOMMENDED, - but MAY be used after careful consideration of the issues in Section - 7.5 and 9.5. - -5.3. Key Derivation: AES-CM PRF - - The AES Counter Mode based key derivation and PRF defined in Sections - 4.3.1 to 4.3.3, using a 128-bit master key, SHALL be the default - method for generating session keys. The default master salt length - SHALL be 112 bits and the default key-derivation rate SHALL be zero. - -6. Adding SRTP Transforms - - Section 4 provides examples of the level of detail needed for - defining transforms. Whenever a new transform is to be added to - SRTP, a companion standard track RFC MUST be written to exactly - define how the new transform can be used with SRTP (and SRTCP). Such - a companion RFC SHOULD avoid overlap with the SRTP protocol document. - Note however, that it MAY be necessary to extend the SRTP or SRTCP - cryptographic context definition with new parameters (including fixed - or default values), add steps to the packet processing, or even add - fields to the SRTP/SRTCP packets. The companion RFC SHALL explain - any known issues regarding interactions between the transform and - other aspects of SRTP. - - Each new transform document SHOULD specify its key attributes, e.g., - size of keys (minimum, maximum, recommended), format of keys, - recommended/required processing of input keying material, - requirements/recommendations on key lifetime, re-keying and key - derivation, whether sharing of keys between SRTP and SRTCP is allowed - or not, etc. - - - -Baugher, et al. Standards Track [Page 29] - -RFC 3711 SRTP March 2004 - - - An added message integrity transform SHOULD define a minimum - acceptable key/tag size for SRTCP, equivalent in strength to the - minimum values as defined in Section 5.2. - -7. Rationale - - This section explains the rationale behind several important features - of SRTP. - -7.1. Key derivation - - Key derivation reduces the burden on the key establishment. As many - as six different keys are needed per crypto context (SRTP and SRTCP - encryption keys and salts, SRTP and SRTCP authentication keys), but - these are derived from a single master key in a cryptographically - secure way. Thus, the key management protocol needs to exchange only - one master key (plus master salt when required), and then SRTP itself - derives all the necessary session keys (via the first, mandatory - application of the key derivation function). - - Multiple applications of the key derivation function are optional, - but will give security benefits when enabled. They prevent an - attacker from obtaining large amounts of ciphertext produced by a - single fixed session key. If the attacker was able to collect a - large amount of ciphertext for a certain session key, he might be - helped in mounting certain attacks. - - Multiple applications of the key derivation function provide - backwards and forward security in the sense that a compromised - session key does not compromise other session keys derived from the - same master key. This means that the attacker who is able to recover - a certain session key, is anyway not able to have access to messages - secured under previous and later session keys (derived from the same - master key). (Note that, of course, a leaked master key reveals all - the session keys derived from it.) - - Considerations arise with high-rate key refresh, especially in large - multicast settings, see Section 11. - -7.2. Salting key - - The master salt guarantees security against off-line key-collision - attacks on the key derivation that might otherwise reduce the - effective key size [MF00]. - - - - - - - -Baugher, et al. Standards Track [Page 30] - -RFC 3711 SRTP March 2004 - - - The derived session salting key used in the encryption, has been - introduced to protect against some attacks on additive stream - ciphers, see Section 9.2. The explicit inclusion method of the salt - in the IV has been selected for ease of hardware implementation. - -7.3. Message Integrity from Universal Hashing - - The particular definition of the keystream given in Section 4.1 (the - keystream prefix) is to give provision for particular universal hash - functions, suitable for message authentication in the Wegman-Carter - paradigm [WC81]. Such functions are provably secure, simple, quick, - and especially appropriate for Digital Signal Processors and other - processors with a fast multiply operation. - - No authentication transforms are currently provided in SRTP other - than HMAC-SHA1. Future transforms, like the above mentioned - universal hash functions, MAY be added following the guidelines in - Section 6. - -7.4. Data Origin Authentication Considerations - - Note that in pair-wise communications, integrity and data origin - authentication are provided together. However, in group scenarios - where the keys are shared between members, the MAC tag only proves - that a member of the group sent the packet, but does not prevent - against a member impersonating another. Data origin authentication - (DOA) for multicast and group RTP sessions is a hard problem that - needs a solution; while some promising proposals are being - investigated [PCST1] [PCST2], more work is needed to rigorously - specify these technologies. Thus SRTP data origin authentication in - groups is for further study. - - DOA can be done otherwise using signatures. However, this has high - impact in terms of bandwidth and processing time, therefore we do not - offer this form of authentication in the pre-defined packet-integrity - transform. - - The presence of mixers and translators does not allow data origin - authentication in case the RTP payload and/or the RTP header are - manipulated. Note that these types of middle entities also disrupt - end-to-end confidentiality (as the IV formation depends e.g., on the - RTP header preservation). A certain trust model may choose to trust - the mixers/translators to decrypt/re-encrypt the media (this would - imply breaking the end-to-end security, with related security - implications). - - - - - - -Baugher, et al. Standards Track [Page 31] - -RFC 3711 SRTP March 2004 - - -7.5. Short and Zero-length Message Authentication - - As shown in Figure 1, the authentication tag is RECOMMENDED in SRTP. - A full 80-bit authentication-tag SHOULD be used, but a shorter tag or - even a zero-length tag (i.e., no message authentication) MAY be used - under certain conditions to support either of the following two - application environments. - - 1. Strong authentication can be impractical in environments where - bandwidth preservation is imperative. An important special - case is wireless communication systems, in which bandwidth is a - scarce and expensive resource. Studies have shown that for - certain applications and link technologies, additional bytes - may result in a significant decrease in spectrum efficiency - [SWO]. Considerable effort has been made to design IP header - compression techniques to improve spectrum efficiency - [RFC3095]. A typical voice application produces 20 byte - samples, and the RTP, UDP and IP headers need to be jointly - compressed to one or two bytes on average in order to obtain - acceptable wireless bandwidth economy [RFC3095]. In this case, - strong authentication would impose nearly fifty percent - overhead. - - 2. Authentication is impractical for applications that use data - links with fixed-width fields that cannot accommodate the - expansion due to the authentication tag. This is the case for - some important existing wireless channels. For example, zero- - byte header compression is used to adapt EVRC/SMV voice with - the legacy IS-95 bearer channel in CDMA2000 VoIP services. It - was found that not a single additional octet could be added to - the data, which motivated the creation of a zero-byte profile - for ROHC [RFC3242]. - - A short tag is secure for a restricted set of applications. Consider - a voice telephony application, for example, such as a G.729 audio - codec with a 20-millisecond packetization interval, protected by a - 32-bit message authentication tag. The likelihood of any given - packet being successfully forged is only one in 2^32. Thus an - adversary can control no more than 20 milliseconds of audio output - during a 994-day period, on average. In contrast, the effect of a - single forged packet can be much larger if the application is - stateful. A codec that uses relative or predictive compression - across packets will propagate the maliciously generated state, - affecting a longer duration of output. - - - - - - - -Baugher, et al. Standards Track [Page 32] - -RFC 3711 SRTP March 2004 - - - Certainly not all SRTP or telephony applications meet the criteria - for short or zero-length authentication tags. Section 9.5.1 - discusses the risks of weak or no message authentication, and section - 9.5 describes the circumstances when it is acceptable and when it is - unacceptable. - -8. Key Management Considerations - - There are emerging key management standards [MIKEY] [KEYMGT] [SDMS] - for establishing an SRTP cryptographic context (e.g., an SRTP master - key). Both proprietary and open-standard key management methods are - likely to be used for telephony applications [MIKEY] [KINK] and - multicast applications [GDOI]. This section provides guidance for - key management systems that service SRTP session. - - For initialization, an interoperable SRTP implementation SHOULD be - given the SSRC and MAY be given the initial RTP sequence number for - the RTP stream by key management (thus, key management has a - dependency on RTP operational parameters). Sending the RTP sequence - number in the key management may be useful e.g., when the initial - sequence number is close to wrapping (to avoid synchronization - problems), and to communicate the current sequence number to a - joining endpoint (to properly initialize its replay list). - - If the pre-defined transforms are used, SRTP allows sharing of the - same master key between SRTP/SRTCP streams belonging to the same RTP - session. - - First, sharing between SRTP streams belonging to the same RTP session - is secure if the design of the synchronization mechanism, i.e., the - IV, avoids keystream re-use (the two-time pad, Section 9.1). This is - taken care of by the fact that RTP provides for unique SSRCs for - streams belonging to the same RTP session. See Section 9.1 for - further discussion. - - Second, sharing between SRTP and the corresponding SRTCP is secure. - The fact that an SRTP stream and its associated SRTCP stream both - carry the same SSRC does not constitute a problem for the two-time - pad due to the key derivation. Thus, SRTP and SRTCP corresponding to - one RTP session MAY share master keys (as they do by default). - - Note that message authentication also has a dependency on SSRC - uniqueness that is unrelated to the problem of keystream reuse: SRTP - streams authenticated under the same key MUST have a distinct SSRC in - order to identify the sender of the message. This requirement is - needed because the SSRC is the cryptographically authenticated field - - - - - -Baugher, et al. Standards Track [Page 33] - -RFC 3711 SRTP March 2004 - - - used to distinguish between different SRTP streams. Were two streams - to use identical SSRC values, then an adversary could substitute - messages from one stream into the other without detection. - - SRTP/SRTCP MUST NOT share master keys under any other circumstances - than the ones given above, i.e., between SRTP and its corresponding - SRTCP, and, between streams belonging to the same RTP session. - -8.1. Re-keying - - The recommended way for a particular key management system to provide - re-key within SRTP is by associating a master key in a crypto context - with an MKI. - - This provides for easy master key retrieval (see Scenarios in Section - 11), but has the disadvantage of adding extra bits to each packet. - As noted in Section 7.5, some wireless links do not cater for added - bits, therefore SRTP also defines a more economic way of triggering - re-keying, via use of <From, To>, which works in some specific, - simple scenarios (see Section 8.1.1). - - SRTP senders SHALL count the amount of SRTP and SRTCP traffic being - used for a master key and invoke key management to re-key if needed - (Section 9.2). These interactions are defined by the key management - interface to SRTP and are not defined by this protocol specification. - -8.1.1. Use of the <From, To> for re-keying - - In addition to the use of the MKI, SRTP defines another optional - mechanism for master key retrieval, the <From, To>. The <From, To> - specifies the range of SRTP indices (a pair of sequence number and - ROC) within which a certain master key is valid, and is (when used) - part of the crypto context. By looking at the 48-bit SRTP index of - the current SRTP packet, the corresponding master key can be found by - determining which From-To interval it belongs to. For SRTCP, the - most recently observed/used SRTP index (which can be obtained from - the cryptographic context) is used for this purpose, even though - SRTCP has its own (31-bit) index (see caveat below). - - This method, compared to the MKI, has the advantage of identifying - the master key and defining its lifetime without adding extra bits to - each packet. This could be useful, as already noted, for some - wireless links that do not cater for added bits. However, its use - SHOULD be limited to specific, very simple scenarios. We recommend - to limit its use when the RTP session is a simple unidirectional or - bi-directional stream. This is because in case of multiple streams, - it is difficult to trigger the re-key based on the <From, To> of a - single RTP stream. For example, if several streams share a master - - - -Baugher, et al. Standards Track [Page 34] - -RFC 3711 SRTP March 2004 - - - key, there is no simple one-to-one correspondence between the index - sequence space of a certain stream, and the index sequence space on - which the <From, To> values are based. Consequently, when a master - key is shared between streams, one of these streams MUST be - designated by key management as the one whose index space defines the - re-keying points. Also, the re-key triggering on SRTCP is based on - the correspondent SRTP stream, i.e., when the SRTP stream changes the - master key, so does the correspondent SRTCP. This becomes obviously - more and more complex with multiple streams. - - The default values for the <From, To> are "from the first observed - packet" and "until further notice". However, the maximum limit of - SRTP/SRTCP packets that are sent under each given master/session key - (Section 9.2) MUST NOT be exceeded. - - In case the <From, To> is used as key retrieval, then the MKI is not - inserted in the packet (and its indicator in the crypto context is - zero). However, using the MKI does not exclude using <From, To> key - lifetime simultaneously. This can for instance be useful to signal - at the sender side at which point in time an MKI is to be made - active. - -8.2. Key Management parameters - - The table below lists all SRTP parameters that key management can - supply. For reference, it also provides a summary of the default and - mandatory-to-support values for an SRTP implementation as described - in Section 5. - - - - - - - - - - - - - - - - - - - - - - - -Baugher, et al. Standards Track [Page 35] - -RFC 3711 SRTP March 2004 - - - Parameter Mandatory-to-support Default - --------- -------------------- ------- - - SRTP and SRTCP encr transf. AES_CM, NULL AES_CM - (Other possible values: AES_f8) - - SRTP and SRTCP auth transf. HMAC-SHA1 HMAC-SHA1 - - SRTP and SRTCP auth params: - n_tag (tag length) 80 80 - SRTP prefix_length 0 0 - - Key derivation PRF AES_CM AES_CM - - Key material params - (for each master key): - master key length 128 128 - n_e (encr session key length) 128 128 - n_a (auth session key length) 160 160 - master salt key - length of the master salt 112 112 - n_s (session salt key length) 112 112 - key derivation rate 0 0 - - key lifetime - SRTP-packets-max-lifetime 2^48 2^48 - SRTCP-packets-max-lifetime 2^31 2^31 - from-to-lifetime <From, To> - MKI indicator 0 0 - length of the MKI 0 0 - value of the MKI - - Crypto context index params: - SSRC value - ROC - SEQ - SRTCP Index - Transport address - Port number - - Relation to other RTP profiles: - sender's order between FEC and SRTP FEC-SRTP FEC-SRTP - (see Section 10) - - - - - - - - -Baugher, et al. Standards Track [Page 36] - -RFC 3711 SRTP March 2004 - - -9. Security Considerations - -9.1. SSRC collision and two-time pad - - Any fixed keystream output, generated from the same key and index - MUST only be used to encrypt once. Re-using such keystream (jokingly - called a "two-time pad" system by cryptographers), can seriously - compromise security. The NSA's VENONA project [C99] provides a - historical example of such a compromise. It is REQUIRED that - automatic key management be used for establishing and maintaining - SRTP and SRTCP keying material; this requirement is to avoid - keystream reuse, which is more likely to occur with manual key - management. Furthermore, in SRTP, a "two-time pad" is avoided by - requiring the key, or some other parameter of cryptographic - significance, to be unique per RTP/RTCP stream and packet. The pre- - defined SRTP transforms accomplish packet-uniqueness by including the - packet index and stream-uniqueness by inclusion of the SSRC. - - The pre-defined transforms (AES-CM and AES-f8) allow master keys to - be shared across streams belonging to the same RTP session by the - inclusion of the SSRC in the IV. A master key MUST NOT be shared - among different RTP sessions. - - Thus, the SSRC MUST be unique between all the RTP streams within the - same RTP session that share the same master key. RTP itself provides - an algorithm for detecting SSRC collisions within the same RTP - session. Thus, temporary collisions could lead to temporary two-time - pad, in the unfortunate event that SSRCs collide at a point in time - when the streams also have identical sequence numbers (occurring with - probability roughly 2^(-48)). Therefore, the key management SHOULD - take care of avoiding such SSRC collisions by including the SSRCs to - be used in the session as negotiation parameters, proactively - assuring their uniqueness. This is a strong requirements in - scenarios where for example, there are multiple senders that can - start to transmit simultaneously, before SSRC collision are detected - at the RTP level. - - Note also that even with distinct SSRCs, extensive use of the same - key might improve chances of probabilistic collision and time- - memory-tradeoff attacks succeeding. - - As described, master keys MAY be shared between streams belonging to - the same RTP session, but it is RECOMMENDED that each SSRC have its - own master key. When master keys are shared among SSRC participants - and SSRCs are managed by a key management module as recommended - above, the RECOMMENDED policy for an SSRC collision error is for the - participant to leave the SRTP session as it is a sign of malfunction. - - - - -Baugher, et al. Standards Track [Page 37] - -RFC 3711 SRTP March 2004 - - -9.2. Key Usage - - The effective key size is determined (upper bounded) by the size of - the master key and, for encryption, the size of the salting key. Any - additive stream cipher is vulnerable to attacks that use statistical - knowledge about the plaintext source to enable key collision and - time-memory tradeoff attacks [MF00] [H80] [BS00]. These attacks take - advantage of commonalities among plaintexts, and provide a way for a - cryptanalyst to amortize the computational effort of decryption over - many keys, or over many bytes of output, thus reducing the effective - key size of the cipher. A detailed analysis of these attacks and - their applicability to the encryption of Internet traffic is provided - in [MF00]. In summary, the effective key size of SRTP when used in a - security system in which m distinct keys are used, is equal to the - key size of the cipher less the logarithm (base two) of m. - Protection against such attacks can be provided simply by increasing - the size of the keys used, which here can be accomplished by the use - of the salting key. Note that the salting key MUST be random but MAY - be public. A salt size of (the suggested) size 112 bits protects - against attacks in scenarios where at most 2^112 keys are in use. - This is sufficient for all practical purposes. - - Implementations SHOULD use keys that are as large as possible. - Please note that in many cases increasing the key size of a cipher - does not affect the throughput of that cipher. - - The use of the SRTP and SRTCP indices in the pre-defined transforms - fixes the maximum number of packets that can be secured with the same - key. This limit is fixed to 2^48 SRTP packets for an SRTP stream, - and 2^31 SRTCP packets, when SRTP and SRTCP are considered - independently. Due to for example re-keying, reaching this limit may - or may not coincide with wrapping of the indices, and thus the sender - MUST keep packet counts. However, when the session keys for related - SRTP and SRTCP streams are derived from the same master key (the - default behavior, Section 4.3), the upper bound that has to be - considered is in practice the minimum of the two quantities. That - is, when 2^48 SRTP packets or 2^31 SRTCP packets have been secured - with the same key (whichever occurs before), the key management MUST - be called to provide new master key(s) (previously stored and used - keys MUST NOT be used again), or the session MUST be terminated. If - a sender of RTCP discovers that the sender of SRTP (or SRTCP) has not - updated the master or session key prior to sending 2^48 SRTP (or 2^31 - SRTCP) packets belonging to the same SRTP (SRTCP) stream, it is up to - the security policy of the RTCP sender how to behave, e.g., whether - an RTCP BYE-packet should be sent and/or if the event should be - logged. - - - - - -Baugher, et al. Standards Track [Page 38] - -RFC 3711 SRTP March 2004 - - - Note: in most typical applications (assuming at least one RTCP packet - for every 128,000 RTP packets), it will be the SRTCP index that first - reaches the upper limit, although the time until this occurs is very - long: even at 200 SRTCP packets/sec, the 2^31 index space of SRTCP is - enough to secure approximately 4 months of communication. - - Note that if the master key is to be shared between SRTP streams - within the same RTP session (Section 9.1), although the above bounds - are on a per stream (i.e., per SSRC) basis, the sender MUST base re- - key decision on the stream whose sequence number space is the first - to be exhausted. - - Key derivation limits the amount of plaintext that is encrypted with - a fixed session key, and made available to an attacker for analysis, - but key derivation does not extend the master key's lifetime. To see - this, simply consider our requirements to avoid two-time pad: two - distinct packets MUST either be processed with distinct IVs, or with - distinct session keys, and both the distinctness of IV and of the - session keys are (for the pre-defined transforms) dependent on the - distinctness of the packet indices. - - Note that with the key derivation, the effective key size is at most - that of the master key, even if the derived session key is - considerably longer. With the pre-defined authentication transform, - the session authentication key is 160 bits, but the master key by - default is only 128 bits. This design choice was made to comply with - certain recommendations in [RFC2104] so that an existing HMAC - implementation can be plugged into SRTP without problems. Since the - default tag size is 80 bits, it is, for the applications in mind, - also considered acceptable from security point of view. Users having - concerns about this are RECOMMENDED to instead use a 192 bit master - key in the key derivation. It was, however, chosen not to mandate - 192-bit keys since existing AES implementations to be used in the - key-derivation may not always support key-lengths other than 128 - bits. Since AES is not defined (or properly analyzed) for use with - 160 bit keys it is NOT RECOMMENDED that ad-hoc key-padding schemes - are used to pad shorter keys to 192 or 256 bits. - -9.3. Confidentiality of the RTP Payload - - SRTP's pre-defined ciphers are "seekable" stream ciphers, i.e., - ciphers able to efficiently seek to arbitrary locations in their - keystream (so that the encryption or decryption of one packet does - not depend on preceding packets). By using seekable stream ciphers, - SRTP avoids the denial of service attacks that are possible on stream - ciphers that lack this property. It is important to be aware that, - as with any stream cipher, the exact length of the payload is - revealed by the encryption. This means that it may be possible to - - - -Baugher, et al. Standards Track [Page 39] - -RFC 3711 SRTP March 2004 - - - deduce certain "formatting bits" of the payload, as the length of the - codec output might vary due to certain parameter settings etc. This, - in turn, implies that the corresponding bit of the keystream can be - deduced. However, if the stream cipher is secure (counter mode and - f8 are provably secure under certain assumptions [BDJR] [KSYH] [IK]), - knowledge of a few bits of the keystream will not aid an attacker in - predicting subsequent keystream bits. Thus, the payload length (and - information deducible from this) will leak, but nothing else. - - As some RTP packet could contain highly predictable data, e.g., SID, - it is important to use a cipher designed to resist known plaintext - attacks (which is the current practice). - -9.4. Confidentiality of the RTP Header - - In SRTP, RTP headers are sent in the clear to allow for header - compression. This means that data such as payload type, - synchronization source identifier, and timestamp are available to an - eavesdropper. Moreover, since RTP allows for future extensions of - headers, we cannot foresee what kind of possibly sensitive - information might also be "leaked". - - SRTP is a low-cost method, which allows header compression to reduce - bandwidth. It is up to the endpoints' policies to decide about the - security protocol to employ. If one really needs to protect headers, - and is allowed to do so by the surrounding environment, then one - should also look at alternatives, e.g., IPsec [RFC2401]. - -9.5. Integrity of the RTP payload and header - - SRTP messages are subject to attacks on their integrity and source - identification, and these risks are discussed in Section 9.5.1. To - protect against these attacks, each SRTP stream SHOULD be protected - by HMAC-SHA1 [RFC2104] with an 80-bit output tag and a 160-bit key, - or a message authentication code with equivalent strength. Secure - RTP SHOULD NOT be used without message authentication, except under - the circumstances described in this section. It is important to note - that encryption algorithms, including AES Counter Mode and f8, do not - provide message authentication. SRTCP MUST NOT be used with weak (or - NULL) authentication. - - SRTP MAY be used with weak authentication (e.g., a 32-bit - authentication tag), or with no authentication (the NULL - authentication algorithm). These options allow SRTP to be used to - provide confidentiality in situations where - - * weak or null authentication is an acceptable security risk, and - * it is impractical to provide strong message authentication. - - - -Baugher, et al. Standards Track [Page 40] - -RFC 3711 SRTP March 2004 - - - These conditions are described below and in Section 7.5. Note that - both conditions MUST hold in order for weak or null authentication to - be used. The risks associated with exercising the weak or null - authentication options need to be considered by a security audit - prior to their use for a particular application or environment given - the risks, which are discussed in Section 9.5.1. - - Weak authentication is acceptable when the RTP application is such - that the effect of a small fraction of successful forgeries is - negligible. If the application is stateless, then the effect of a - single forged RTP packet is limited to the decoding of that - particular packet. Under this condition, the size of the - authentication tag MUST ensure that only a negligible fraction of the - packets passed to the RTP application by the SRTP receiver can be - forgeries. This fraction is negligible when an adversary, if given - control of the forged packets, is not able to make a significant - impact on the output of the RTP application (see the example of - Section 7.5). - - Weak or null authentication MAY be acceptable when it is unlikely - that an adversary can modify ciphertext so that it decrypts to an - intelligible value. One important case is when it is difficult for - an adversary to acquire the RTP plaintext data, since for many - codecs, an adversary that does not know the input signal cannot - manipulate the output signal in a controlled way. In many cases it - may be difficult for the adversary to determine the actual value of - the plaintext. For example, a hidden snooping device might be - required in order to know a live audio or video signal. The - adversary's signal must have a quality equivalent to or greater than - that of the signal under attack, since otherwise the adversary would - not have enough information to encode that signal with the codec used - by the victim. Plaintext prediction may also be especially difficult - for an interactive application such as a telephone call. - - Weak or null authentication MUST NOT be used when the RTP application - makes data forwarding or access control decisions based on the RTP - data. In such a case, an attacker may be able to subvert - confidentiality by causing the receiver to forward data to an - attacker. See Section 3 of [B96] for a real-life example of such - attacks. - - Null authentication MUST NOT be used when a replay attack, in which - an adversary stores packets then replays them later in the session, - could have a non-negligible impact on the receiver. An example of a - successful replay attack is the storing of the output of a - surveillance camera for a period of time, later followed by the - - - - - -Baugher, et al. Standards Track [Page 41] - -RFC 3711 SRTP March 2004 - - - injection of that output to the monitoring station to avoid - surveillance. Encryption does not protect against this attack, and - non-null authentication is REQUIRED in order to defeat it. - - If existential message forgery is an issue, i.e., when the accuracy - of the received data is of non-negligible importance, null - authentication MUST NOT be used. - -9.5.1. Risks of Weak or Null Message Authentication - - During a security audit considering the use of weak or null - authentication, it is important to keep in mind the following attacks - which are possible when no message authentication algorithm is used. - - An attacker who cannot predict the plaintext is still always able to - modify the message sent between the sender and the receiver so that - it decrypts to a random plaintext value, or to send a stream of bogus - packets to the receiver that will decrypt to random plaintext values. - This attack is essentially a denial of service attack, though in the - absence of message authentication, the RTP application will have - inputs that are bit-wise correlated with the true value. Some - multimedia codecs and common operating systems will crash when such - data are accepted as valid video data. This denial of service attack - may be a much larger threat than that due to an attacker dropping, - delaying, or re-ordering packets. - - An attacker who cannot predict the plaintext can still replay a - previous message with certainty that the receiver will accept it. - Applications with stateless codecs might be robust against this type - of attack, but for other, more complex applications these attacks may - be far more grave. - - An attacker who can predict the plaintext can modify the ciphertext - so that it will decrypt to any value of her choosing. With an - additive stream cipher, an attacker will always be able to change - individual bits. - - An attacker may be able to subvert confidentiality due to the lack of - authentication when a data forwarding or access control decision is - made on decrypted but unauthenticated plaintext. This is because the - receiver may be fooled into forwarding data to an attacker, leading - to an indirect breach of confidentiality (see Section 3 of [B96]). - This is because data-forwarding decisions are made on the decrypted - plaintext; information in the plaintext will determine to what subnet - (or process) the plaintext is forwarded in ESP [RFC2401] tunnel mode - (respectively, transport mode). When Secure RTP is used without - - - - - -Baugher, et al. Standards Track [Page 42] - -RFC 3711 SRTP March 2004 - - - message authentication, it should be verified that the application - does not make data forwarding or access control decisions based on - the decrypted plaintext. - - Some cipher modes of operation that require padding, e.g., standard - cipher block chaining (CBC) are very sensitive to attacks on - confidentiality if certain padding types are used in the absence of - integrity. The attack [V02] shows that this is indeed the case for - the standard RTP padding as discussed in reference to Figure 1, when - used together with CBC mode. Later transform additions to SRTP MUST - therefore carefully consider the risk of using this padding without - proper integrity protection. - -9.5.2. Implicit Header Authentication - - The IV formation of the f8-mode gives implicit authentication (IHA) - of the RTP header, even when message authentication is not used. - When IHA is used, an attacker that modifies the value of the RTP - header will cause the decryption process at the receiver to produce - random plaintext values. While this protection is not equivalent to - message authentication, it may be useful for some applications. - -10. Interaction with Forward Error Correction mechanisms - - The default processing when using Forward Error Correction (e.g., RFC - 2733) processing with SRTP SHALL be to perform FEC processing prior - to SRTP processing on the sender side and to perform SRTP processing - prior to FEC processing on the receiver side. Any change to this - ordering (reversing it, or, placing FEC between SRTP encryption and - SRTP authentication) SHALL be signaled out of band. - -11. Scenarios - - SRTP can be used as security protocol for the RTP/RTCP traffic in - many different scenarios. SRTP has a number of configuration - options, in particular regarding key usage, and can have impact on - the total performance of the application according to the way it is - used. Hence, the use of SRTP is dependent on the kind of scenario - and application it is used with. In the following, we briefly - illustrate some use cases for SRTP, and give some guidelines for - recommended setting of its options. - -11.1. Unicast - - A typical example would be a voice call or video-on-demand - application. - - - - - -Baugher, et al. Standards Track [Page 43] - -RFC 3711 SRTP March 2004 - - - Consider one bi-directional RTP stream, as one RTP session. It is - possible for the two parties to share the same master key in the two - directions according to the principles of Section 9.1. The first - round of the key derivation splits the master key into any or all of - the following session keys (according to the provided security - functions): - - SRTP_encr_key, SRTP_auth_key, SRTCP_encr_key, and SRTCP_auth key. - - (For simplicity, we omit discussion of the salts, which are also - derived.) In this scenario, it will in most cases suffice to have a - single master key with the default lifetime. This guarantees - sufficiently long lifetime of the keys and a minimum set of keys in - place for most practical purposes. Also, in this case RTCP - protection can be applied smoothly. Under these assumptions, use of - the MKI can be omitted. As the key-derivation in combination with - large difference in the packet rate in the respective directions may - require simultaneous storage of several session keys, if storage is - an issue, we recommended to use low-rate key derivation. - - The same considerations can be extended to the unicast scenario with - multiple RTP sessions, where each session would have a distinct - master key. - -11.2. Multicast (one sender) - - Just as with (unprotected) RTP, a scalability issue arises in big - groups due to the possibly very large amount of SRTCP Receiver - Reports that the sender might need to process. In SRTP, the sender - may have to keep state (the cryptographic context) for each receiver, - or more precisely, for the SRTCP used to protect Receiver Reports. - The overhead increases proportionally to the size of the group. In - particular, re-keying requires special concern, see below. - - Consider first a small group of receivers. There are a few possible - setups with the distribution of master keys among the receivers. - Given a single RTP session, one possibility is that the receivers - share the same master key as per Section 9.1 to secure all their - respective RTCP traffic. This shared master key could then be the - same one used by the sender to protect its outbound SRTP traffic. - Alternatively, it could be a master key shared only among the - receivers and used solely for their SRTCP traffic. Both alternatives - require the receivers to trust each other. - - Considering SRTCP and key storage, it is recommended to use low-rate - (or zero) key_derivation (except the mandatory initial one), so that - the sender does not need to store too many session keys (each SRTCP - stream might otherwise have a different session key at a given point - - - -Baugher, et al. Standards Track [Page 44] - -RFC 3711 SRTP March 2004 - - - in time, as the SRTCP sources send at different times). Thus, in - case key derivation is wanted for SRTP, the cryptographic context for - SRTP can be kept separate from the SRTCP crypto context, so that it - is possible to have a key_derivation_rate of 0 for SRTCP and a non- - zero value for SRTP. - - Use of the MKI for re-keying is RECOMMENDED for most applications - (see Section 8.1). - - If there are more than one SRTP/SRTCP stream (within the same RTP - session) that share the master key, the upper limit of 2^48 SRTP - packets / 2^31 SRTCP packets means that, before one of the streams - reaches its maximum number of packets, re-keying MUST be triggered on - ALL streams sharing the master key. (From strict security point of - view, only the stream reaching the maximum would need to be re-keyed, - but then the streams would no longer be sharing master key, which is - the intention.) A local policy at the sender side should force - rekeying in a way that the maximum packet limit is not reached on any - of the streams. Use of the MKI for re-keying is RECOMMENDED. - - In large multicast with one sender, the same considerations as for - the small group multicast hold. The biggest issue in this scenario - is the additional load placed at the sender side, due to the state - (cryptographic contexts) that has to be maintained for each receiver, - sending back RTCP Receiver Reports. At minimum, a replay window - might need to be maintained for each RTCP source. - -11.3. Re-keying and access control - - Re-keying may occur due to access control (e.g., when a member is - removed during a multicast RTP session), or for pure cryptographic - reasons (e.g., the key is at the end of its lifetime). When using - SRTP default transforms, the master key MUST be replaced before any - of the index spaces are exhausted for any of the streams protected by - one and the same master key. - - How key management re-keys SRTP implementations is out of scope, but - it is clear that there are straightforward ways to manage keys for a - multicast group. In one-sender multicast, for example, it is - typically the responsibility of the sender to determine when a new - key is needed. The sender is the one entity that can keep track of - when the maximum number of packets has been sent, as receivers may - join and leave the session at any time, there may be packet loss and - delay etc. In scenarios other than one-sender multicast, other - methods can be used. Here, one must take into consideration that key - exchange can be a costly operation, taking several seconds for a - single exchange. Hence, some time before the master key is - exhausted/expires, out-of-band key management is initiated, resulting - - - -Baugher, et al. Standards Track [Page 45] - -RFC 3711 SRTP March 2004 - - - in a new master key that is shared with the receiver(s). In any - event, to maintain synchronization when switching to the new key, - group policy might choose between using the MKI and the <From, To>, - as described in Section 8.1. - - For access control purposes, the <From, To> periods are set at the - desired granularity, dependent on the packet rate. High rate re- - keying can be problematic for SRTCP in some large-group scenarios. - As mentioned, there are potential problems in using the SRTP index, - rather than the SRTCP index, for determining the master key. In - particular, for short periods during switching of master keys, it may - be the case that SRTCP packets are not under the current master key - of the correspondent SRTP. Therefore, using the MKI for re-keying in - such scenarios will produce better results. - -11.4. Summary of basic scenarios - - The description of these scenarios highlights some recommendations on - the use of SRTP, mainly related to re-keying and large scale - multicast: - - - Do not use fast re-keying with the <From, To> feature. It may, in - particular, give problems in retrieving the correct SRTCP key, if - an SRTCP packet arrives close to the re-keying time. The MKI - SHOULD be used in this case. - - - If multiple SRTP streams in the same RTP session share the same - master key, also moderate rate re-keying MAY have the same - problems, and the MKI SHOULD be used. - - - Though offering increased security, a non-zero key_derivation_rate - is NOT RECOMMENDED when trying to minimize the number of keys in - use with multiple streams. - -12. IANA Considerations - - The RTP specification establishes a registry of profile names for use - by higher-level control protocols, such as the Session Description - Protocol (SDP), to refer to transport methods. This profile - registers the name "RTP/SAVP". - - SRTP uses cryptographic transforms which a key management protocol - signals. It is the task of each particular key management protocol - to register the cryptographic transforms or suites of transforms with - IANA. The key management protocol conveys these protocol numbers, - not SRTP, and each key management protocol chooses the numbering - scheme and syntax that it requires. - - - - -Baugher, et al. Standards Track [Page 46] - -RFC 3711 SRTP March 2004 - - - Specification of a key management protocol for SRTP is out of scope - here. Section 8.2, however, provides guidance on the parameters that - need to be defined for the default and mandatory transforms. - -13. Acknowledgements - - David Oran (Cisco) and Rolf Blom (Ericsson) are co-authors of this - document but their valuable contributions are acknowledged here to - keep the length of the author list down. - - The authors would in addition like to thank Magnus Westerlund, Brian - Weis, Ghyslain Pelletier, Morgan Lindqvist, Robert Fairlie- - Cuninghame, Adrian Perrig, the AVT WG and in particular the chairmen - Colin Perkins and Stephen Casner, the Transport and Security Area - Directors, and Eric Rescorla for their reviews and support. - -14. References - -14.1. Normative References - - [AES] NIST, "Advanced Encryption Standard (AES)", FIPS PUB 197, - http://www.nist.gov/aes/ - - [RFC2104] Krawczyk, H., Bellare, M. and R. Canetti, "HMAC: Keyed- - Hashing for Message Authentication", RFC 2104, February - 1997. - - [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate - Requirement Levels", BCP 14, RFC 2119, March 1997. - - [RFC2401] Kent, S. and R. Atkinson, "Security Architecture for - Internet Protocol", RFC 2401, November 1998. - - [RFC2828] Shirey, R., "Internet Security Glossary", FYI 36, RFC 2828, - May 2000. - - [RFC3550] Schulzrinne, H., Casner, S., Frederick, R. and V. Jacobson, - "RTP: A Transport Protocol for Real-time Applications", RFC - 3550, July 2003. - - [RFC3551] Schulzrinne, H. and S. Casner, "RTP Profile for Audio and - Video Conferences with Minimal Control", RFC 3551, July - 2003. - - - - - - - - -Baugher, et al. Standards Track [Page 47] - -RFC 3711 SRTP March 2004 - - -14.2. Informative References - - [AES-CTR] Lipmaa, H., Rogaway, P. and D. Wagner, "CTR-Mode - Encryption", NIST, http://csrc.nist.gov/encryption/modes/ - workshop1/papers/lipmaa-ctr.pdf - - [B96] Bellovin, S., "Problem Areas for the IP Security - Protocols," in Proceedings of the Sixth Usenix Unix - Security Symposium, pp. 1-16, San Jose, CA, July 1996 - (http://www.research.att.com/~smb/papers/index.html). - - [BDJR] Bellare, M., Desai, A., Jokipii, E. and P. Rogaway, "A - Concrete Treatment of Symmetric Encryption: Analysis of DES - Modes of Operation", Proceedings 38th IEEE FOCS, pp. 394- - 403, 1997. - - [BS00] Biryukov, A. and A. Shamir, "Cryptanalytic Time/Memory/Data - Tradeoffs for Stream Ciphers", Proceedings, ASIACRYPT 2000, - LNCS 1976, pp. 1-13, Springer Verlag. - - [C99] Crowell, W. P., "Introduction to the VENONA Project", - http://www.nsa.gov:8080/docs/venona/index.html. - - [CTR] Dworkin, M., NIST Special Publication 800-38A, - "Recommendation for Block Cipher Modes of Operation: - Methods and Techniques", 2001. - http://csrc.nist.gov/publications/nistpubs/800-38a/sp800- - 38a.pdf. - - [f8-a] 3GPP TS 35.201 V4.1.0 (2001-12) Technical Specification 3rd - Generation Partnership Project; Technical Specification - Group Services and System Aspects; 3G Security; - Specification of the 3GPP Confidentiality and Integrity - Algorithms; Document 1: f8 and f9 Specification (Release - 4). - - [f8-b] 3GPP TR 33.908 V4.0.0 (2001-09) Technical Report 3rd - Generation Partnership Project; Technical Specification - Group Services and System Aspects; 3G Security; General - Report on the Design, Specification and Evaluation of 3GPP - Standard Confidentiality and Integrity Algorithms (Release - 4). - - [GDOI] Baugher, M., Weis, B., Hardjono, T. and H. Harney, "The - Group Domain of Interpretation, RFC 3547, July 2003. - - - - - - -Baugher, et al. Standards Track [Page 48] - -RFC 3711 SRTP March 2004 - - - [HAC] Menezes, A., Van Oorschot, P. and S. Vanstone, "Handbook - of Applied Cryptography", CRC Press, 1997, ISBN 0-8493- - 8523-7. - - [H80] Hellman, M. E., "A cryptanalytic time-memory trade-off", - IEEE Transactions on Information Theory, July 1980, pp. - 401-406. - - [IK] T. Iwata and T. Kohno: "New Security Proofs for the 3GPP - Confidentiality and Integrity Algorithms", Proceedings of - FSE 2004. - - [KINK] Thomas, M. and J. Vilhuber, "Kerberized Internet - Negotiation of Keys (KINK)", Work in Progress. - - [KEYMGT] Arrko, J., et al., "Key Management Extensions for Session - Description Protocol (SDP) and Real Time Streaming Protocol - (RTSP)", Work in Progress. - - [KSYH] Kang, J-S., Shin, S-U., Hong, D. and O. Yi, "Provable - Security of KASUMI and 3GPP Encryption Mode f8", - Proceedings Asiacrypt 2001, Springer Verlag LNCS 2248, pp. - 255-271, 2001. - - [MIKEY] Arrko, J., et. al., "MIKEY: Multimedia Internet KEYing", - Work in Progress. - - [MF00] McGrew, D. and S. Fluhrer, "Attacks on Encryption of - Redundant Plaintext and Implications on Internet Security", - the Proceedings of the Seventh Annual Workshop on Selected - Areas in Cryptography (SAC 2000), Springer-Verlag. - - [PCST1] Perrig, A., Canetti, R., Tygar, D. and D. Song, "Efficient - and Secure Source Authentication for Multicast", in Proc. - of Network and Distributed System Security Symposium NDSS - 2001, pp. 35-46, 2001. - - [PCST2] Perrig, A., Canetti, R., Tygar, D. and D. Song, "Efficient - Authentication and Signing of Multicast Streams over Lossy - Channels", in Proc. of IEEE Security and Privacy Symposium - S&P2000, pp. 56-73, 2000. - - [RFC1750] Eastlake, D., Crocker, S. and J. Schiller, "Randomness - Recommendations for Security", RFC 1750, December 1994. - - [RFC2675] Borman, D., Deering, S. and R. Hinden, "IPv6 Jumbograms", - RFC 2675, August 1999. - - - - -Baugher, et al. Standards Track [Page 49] - -RFC 3711 SRTP March 2004 - - - [RFC3095] Bormann, C., Burmeister, C., Degermark, M., Fukuhsima, H., - Hannu, H., Jonsson, L-E., Hakenberg, R., Koren, T., Le, K., - Liu, Z., Martensson, A., Miyazaki, A., Svanbro, K., Wiebke, - T., Yoshimura, T. and H. Zheng, "RObust Header Compression: - Framework and Four Profiles: RTP, UDP, ESP, and - uncompressed (ROHC)", RFC 3095, July 2001. - - [RFC3242] Jonsson, L-E. and G. Pelletier, "RObust Header Compression - (ROHC): A Link-Layer Assisted Profile for IP/UDP/RTP ", RFC - 3242, April 2002. - - [SDMS] Andreasen, F., Baugher, M. and D. Wing, "Session - Description Protocol Security Descriptions for Media - Streams", Work in Progress. - - [SWO] Svanbro, K., Wiorek, J. and B. Olin, "Voice-over-IP-over- - wireless", Proc. PIMRC 2000, London, Sept. 2000. - - [V02] Vaudenay, S., "Security Flaws Induced by CBC Padding - - Application to SSL, IPsec, WTLS...", Advances in - Cryptology, EUROCRYPT'02, LNCS 2332, pp. 534-545. - - [WC81] Wegman, M. N., and J.L. Carter, "New Hash Functions and - Their Use in Authentication and Set Equality", JCSS 22, - 265-279, 1981. - - - - - - - - - - - - - - - - - - - - - - - - - - -Baugher, et al. Standards Track [Page 50] - -RFC 3711 SRTP March 2004 - - -Appendix A: Pseudocode for Index Determination - - The following is an example of pseudo-code for the algorithm to - determine the index i of an SRTP packet with sequence number SEQ. In - the following, signed arithmetic is assumed. - - if (s_l < 32,768) - if (SEQ - s_l > 32,768) - set v to (ROC-1) mod 2^32 - else - set v to ROC - endif - else - if (s_l - 32,768 > SEQ) - set v to (ROC+1) mod 2^32 - else - set v to ROC - endif - endif - return SEQ + v*65,536 - -Appendix B: Test Vectors - - All values are in hexadecimal. - -B.1. AES-f8 Test Vectors - - SRTP PREFIX LENGTH : 0 - - RTP packet header : 806e5cba50681de55c621599 - - RTP packet payload : 70736575646f72616e646f6d6e657373 - 20697320746865206e65787420626573 - 74207468696e67 - - ROC : d462564a - key : 234829008467be186c3de14aae72d62c - salt key : 32f2870d - key-mask (m) : 32f2870d555555555555555555555555 - key XOR key-mask : 11baae0dd132eb4d3968b41ffb278379 - - IV : 006e5cba50681de55c621599d462564a - IV' : 595b699bbd3bc0df26062093c1ad8f73 - - - - - - - - -Baugher, et al. Standards Track [Page 51] - -RFC 3711 SRTP March 2004 - - - j = 0 - IV' xor j : 595b699bbd3bc0df26062093c1ad8f73 - S(-1) : 00000000000000000000000000000000 - IV' xor S(-1) xor j : 595b699bbd3bc0df26062093c1ad8f73 - S(0) : 71ef82d70a172660240709c7fbb19d8e - plaintext : 70736575646f72616e646f6d6e657373 - ciphertext : 019ce7a26e7854014a6366aa95d4eefd - - j = 1 - IV' xor j : 595b699bbd3bc0df26062093c1ad8f72 - S(0) : 71ef82d70a172660240709c7fbb19d8e - IV' xor S(0) xor j : 28b4eb4cb72ce6bf020129543a1c12fc - S(1) : 3abd640a60919fd43bd289a09649b5fc - plaintext : 20697320746865206e65787420626573 - ciphertext : 1ad4172a14f9faf455b7f1d4b62bd08f - - j = 2 - IV' xor j : 595b699bbd3bc0df26062093c1ad8f71 - S(1) : 3abd640a60919fd43bd289a09649b5fc - IV' xor S(1) xor j : 63e60d91ddaa5f0b1dd4a93357e43a8d - S(2) : 220c7a8715266565b09ecc8a2a62b11b - plaintext : 74207468696e67 - ciphertext : 562c0eef7c4802 - -B.2. AES-CM Test Vectors - - Keystream segment length: 1044512 octets (65282 AES blocks) - Session Key: 2B7E151628AED2A6ABF7158809CF4F3C - Rollover Counter: 00000000 - Sequence Number: 0000 - SSRC: 00000000 - Session Salt: F0F1F2F3F4F5F6F7F8F9FAFBFCFD0000 (already shifted) - Offset: F0F1F2F3F4F5F6F7F8F9FAFBFCFD0000 - - Counter Keystream - - F0F1F2F3F4F5F6F7F8F9FAFBFCFD0000 E03EAD0935C95E80E166B16DD92B4EB4 - F0F1F2F3F4F5F6F7F8F9FAFBFCFD0001 D23513162B02D0F72A43A2FE4A5F97AB - F0F1F2F3F4F5F6F7F8F9FAFBFCFD0002 41E95B3BB0A2E8DD477901E4FCA894C0 - ... ... - F0F1F2F3F4F5F6F7F8F9FAFBFCFDFEFF EC8CDF7398607CB0F2D21675EA9EA1E4 - F0F1F2F3F4F5F6F7F8F9FAFBFCFDFF00 362B7C3C6773516318A077D7FC5073AE - F0F1F2F3F4F5F6F7F8F9FAFBFCFDFF01 6A2CC3787889374FBEB4C81B17BA6C44 - - Nota Bene: this test case is contrived so that the latter part of the - keystream segment coincides with the test case in Section F.5.1 of - [CTR]. - - - - -Baugher, et al. Standards Track [Page 52] - -RFC 3711 SRTP March 2004 - - -B.3. Key Derivation Test Vectors - - This section provides test data for the default key derivation - function, which uses AES-128 in Counter Mode. In the following, we - walk through the initial key derivation for the AES-128 Counter Mode - cipher, which requires a 16 octet session encryption key and a 14 - octet session salt, and an authentication function which requires a - 94-octet session authentication key. These values are called the - cipher key, the cipher salt, and the auth key in the following. - Since this is the initial key derivation and the key derivation rate - is equal to zero, the value of (index DIV key_derivation_rate) is - zero (actually, a six-octet string of zeros). In the following, we - shorten key_derivation_rate to kdr. - - The inputs to the key derivation function are the 16 octet master key - and the 14 octet master salt: - - master key: E1F97A0D3E018BE0D64FA32C06DE4139 - master salt: 0EC675AD498AFEEBB6960B3AABE6 - - We first show how the cipher key is generated. The input block for - AES-CM is generated by exclusive-oring the master salt with the - concatenation of the encryption key label 0x00 with (index DIV kdr), - then padding on the right with two null octets (which implements the - multiply-by-2^16 operation, see Section 4.3.3). The resulting value - is then AES-CM- encrypted using the master key to get the cipher key. - - index DIV kdr: 000000000000 - label: 00 - master salt: 0EC675AD498AFEEBB6960B3AABE6 - ----------------------------------------------- - xor: 0EC675AD498AFEEBB6960B3AABE6 (x, PRF input) - - x*2^16: 0EC675AD498AFEEBB6960B3AABE60000 (AES-CM input) - - cipher key: C61E7A93744F39EE10734AFE3FF7A087 (AES-CM output) - - - - - - - - - - - - - - - -Baugher, et al. Standards Track [Page 53] - -RFC 3711 SRTP March 2004 - - - Next, we show how the cipher salt is generated. The input block for - AES-CM is generated by exclusive-oring the master salt with the - concatenation of the encryption salt label. That value is padded and - encrypted as above. - - index DIV kdr: 000000000000 - label: 02 - master salt: 0EC675AD498AFEEBB6960B3AABE6 - - ---------------------------------------------- - xor: 0EC675AD498AFEE9B6960B3AABE6 (x, PRF input) - - x*2^16: 0EC675AD498AFEE9B6960B3AABE60000 (AES-CM input) - - 30CBBC08863D8C85D49DB34A9AE17AC6 (AES-CM ouptut) - - cipher salt: 30CBBC08863D8C85D49DB34A9AE1 - - We now show how the auth key is generated. The input block for AES- - CM is generated as above, but using the authentication key label. - - index DIV kdr: 000000000000 - label: 01 - master salt: 0EC675AD498AFEEBB6960B3AABE6 - ----------------------------------------------- - xor: 0EC675AD498AFEEAB6960B3AABE6 (x, PRF input) - - x*2^16: 0EC675AD498AFEEAB6960B3AABE60000 (AES-CM input) - - Below, the auth key is shown on the left, while the corresponding AES - input blocks are shown on the right. - - auth key AES input blocks - CEBE321F6FF7716B6FD4AB49AF256A15 0EC675AD498AFEEAB6960B3AABE60000 - 6D38BAA48F0A0ACF3C34E2359E6CDBCE 0EC675AD498AFEEAB6960B3AABE60001 - E049646C43D9327AD175578EF7227098 0EC675AD498AFEEAB6960B3AABE60002 - 6371C10C9A369AC2F94A8C5FBCDDDC25 0EC675AD498AFEEAB6960B3AABE60003 - 6D6E919A48B610EF17C2041E47403576 0EC675AD498AFEEAB6960B3AABE60004 - 6B68642C59BBFC2F34DB60DBDFB2 0EC675AD498AFEEAB6960B3AABE60005 - - - - - - - - - - - - -Baugher, et al. Standards Track [Page 54] - -RFC 3711 SRTP March 2004 - - -Authors' Addresses - - Questions and comments should be directed to the authors and - avt@ietf.org: - - Mark Baugher - Cisco Systems, Inc. - 5510 SW Orchid Street - Portland, OR 97219 USA - - Phone: +1 408-853-4418 - EMail: mbaugher@cisco.com - - - Elisabetta Carrara - Ericsson Research - SE-16480 Stockholm - Sweden - - Phone: +46 8 50877040 - EMail: elisabetta.carrara@ericsson.com - - - David A. McGrew - Cisco Systems, Inc. - San Jose, CA 95134-1706 - USA - - Phone: +1 301-349-5815 - EMail: mcgrew@cisco.com - - - Mats Naslund - Ericsson Research - SE-16480 Stockholm - Sweden - - Phone: +46 8 58533739 - EMail: mats.naslund@ericsson.com - - - Karl Norrman - Ericsson Research - SE-16480 Stockholm - Sweden - - Phone: +46 8 4044502 - EMail: karl.norrman@ericsson.com - - - -Baugher, et al. Standards Track [Page 55] - -RFC 3711 SRTP March 2004 - - -Full Copyright Statement - - Copyright (C) The Internet Society (2004). This document is subject - to the rights, licenses and restrictions contained in BCP 78 and - except as set forth therein, the authors retain all their rights. - - This document and the information contained herein are provided on an - "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS - OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET - ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, - INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE - INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED - WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. - -Intellectual Property - - The IETF takes no position regarding the validity or scope of any - Intellectual Property Rights or other rights that might be claimed to - pertain to the implementation or use of the technology described in - this document or the extent to which any license under such rights - might or might not be available; nor does it represent that it has - made any independent effort to identify any such rights. Information - on the procedures with respect to rights in RFC documents can be - found in BCP 78 and BCP 79. - - Copies of IPR disclosures made to the IETF Secretariat and any - assurances of licenses to be made available, or the result of an - attempt made to obtain a general license or permission for the use of - such proprietary rights by implementers or users of this - specification can be obtained from the IETF on-line IPR repository at - http://www.ietf.org/ipr. - - The IETF invites any interested party to bring to its attention any - copyrights, patents or patent applications, or other proprietary - rights that may cover technology that may be required to implement - this standard. Please address the information to the IETF at ietf- - ipr@ietf.org. - -Acknowledgement - - Funding for the RFC Editor function is currently provided by the - Internet Society. - - - - - - - - - -Baugher, et al. Standards Track [Page 56] - |