diff options
Diffstat (limited to 'src/man')
| -rw-r--r-- | src/man/anytun-config.8.txt | 117 | ||||
| -rw-r--r-- | src/man/anytun-controld.8.txt | 92 | ||||
| -rw-r--r-- | src/man/anytun-showtables.8.txt | 2 | ||||
| -rw-r--r-- | src/man/anytun.8.txt | 237 |
4 files changed, 306 insertions, 142 deletions
diff --git a/src/man/anytun-config.8.txt b/src/man/anytun-config.8.txt index 258bec8..b1e31a3 100644 --- a/src/man/anytun-config.8.txt +++ b/src/man/anytun-config.8.txt @@ -10,13 +10,20 @@ SYNOPSIS *anytun-config* [ *-h|--help* ] +[ *-L|--log* <target>:<level>[,<param1>[,<param2>[..]]] [ *-r|--remote-host* <hostname|ip> ] [ *-o|--remote-port* <port> ] -[ *-w|--window-size* <window size> ] +[ *-4|--ipv4-only* ] +[ *-6|--ipv6-only* ] +[ *-R|--route* <net>/<prefix length> ] [ *-m|--mux* <mux-id> ] +[ *-w|--window-size* <window size> ] +[ *-k|--kd-prf* <kd-prf type> ] +[ *-l|--ld-kdr* <ld-kdr> ] +[ *-O|--anytun02-compat* ] +[ *-E|--passphrase* <pass phrase> ] [ *-K|--key* <master key> ] [ *-A|--salt* <master salt> ] -[ *-T|--route* <net>/<prefix length> ] DESCRIPTION ----------- @@ -26,6 +33,27 @@ DESCRIPTION OPTIONS ------- +-L|--log <target>:<level>[,<param1>[,<param2>[..]]] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +add log target to logging system. This can be invoked several times +in order to log to different targets at the same time. Every target +hast its own log level which is a number between 0 and 5. Where 0 means +disabling log and 5 means debug messages are enabled. + +The following targets are supported: + +* *syslog* - log to syslog daemon, parameters <level>[,<logname>[,<facility>]] +* *file* - log to file, parameters <level>[,<path>] +* *stdout* - log to standard output, parameters <level> +* *stderr* - log to standard error, parameters <level> + +The file target can be used more the once with different levels. +If no target is provided at the command line a single target with the +following config is added: + +*syslog:3,uanytun,daemon* + -r|--remote-host <hostname|ip> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -46,6 +74,28 @@ The UDP port used for payload data by the remote host a port, it is automatically determined after receiving the first data packet. +-4|--ipv4-only +~~~~~~~~~~~~~~ + +Resolv to IPv4 addresses only. The default is to resolv both +IPv4 and IPv6 addresses. + +-6|--ipv6-only +~~~~~~~~~~~~~~ + +Resolv to IPv6 addresses only. The default is to resolv both +IPv4 and IPv6 addresses. + +-R|--route <net>/<prefix length> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +add a route to connection. This can be invoked several times. + +-m|--mux <mux-id> +~~~~~~~~~~~~~~~~~ + +the multiplex id to use. default: 0 + -w|--window-size <window size> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -63,45 +113,76 @@ by filtering packets according to their secuence number. By default the sequence window is disabled and therefore a window size of 0 is used. --m|--mux <mux-id> -~~~~~~~~~~~~~~~~~ +-k|--kd--prf <kd-prf type> +~~~~~~~~~~~~~~~~~~~~~~~~~~ -the multiplex id to use. default: 0 +key derivation pseudo random function. + +The pseudo random function which is used for calculating the +session keys and session salt. + +Possible values: + +* *null* - no random function, keys and salt are set to 0..00 +* *aes-ctr* - AES in counter mode with 128 Bits, default value +* *aes-ctr-128* - AES in counter mode with 128 Bits +* *aes-ctr-192* - AES in counter mode with 192 Bits +* *aes-ctr-256* - AES in counter mode with 256 Bits + +-l|--ld-kdr <ld-kdr> +~~~~~~~~~~~~~~~~~~~~ + +The log2 of the key derivation rate. This is used by the key +derivation to determine how often a new session key has to be +generated. A value of -1 means to generate only one key and use +it forever. The default is 0 which means to calculate a new key +for every packet. A value of 1 would tell the key derivation +to generate a new key after 2 packets, for 2 its 4 packets and +so on. + +-O|--anytun02-compat +~~~~~~~~~~~~~~~~~~~~ + +Enable compatibility mode with version of anytun 0.2.x and prior. +This is for backwards compaitbility to old internet draft of satp. + +-E|--passphrase <pass phrase> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This passphrase is used to generate the master key and master salt. +For the master key the last n bits of the SHA256 digest of the +passphrase (where n is the length of the master key in bits) is used. +The master salt gets generated with the SHA1 digest. +You may force a specific key and or salt by using *--key* and *--salt*. -K|--key <master key> ~~~~~~~~~~~~~~~~~~~~~ -master key to use for encryption +master key to use for key derivation Master key in hexadecimal notation, eg 01a2b3c4d5e6f708a9b0cadbecfd0fa1, with a mandatory length -of 32 characters (16 bytes). +of 32, 48 or 64 characters (128, 192 or 256 bits). -A|--salt <master salt> ~~~~~~~~~~~~~~~~~~~~~~~ -master salt to use for encryption +master salt to use for key derivation Master salt in hexadecimal notation, eg 01a2b3c4d5e6f708a9b0cadbecfd, with a mandatory length of 28 characters (14 bytes). --T|--route <net>/<prefix length> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -add a route to connection. This can be invoked several times. - EXAMPLES -------- Add a client with Connection ID (Mux) 12 and add 2 Routes to this client - --------------------------------------------------------------------------------------- -# anytun -w 0 -m 12 -K 0123456789ABCDEFFEDCBA9876543210 -A 0123456789ABCDDCBA9876543210 \ - -R 192.0.2.0/24 -R 192.168.1.1/32 >> routingtable --------------------------------------------------------------------------------------- +------------------------------------------------------------------------------------------------ +# anytun-config -w 0 -m 12 -K 0123456789ABCDEFFEDCBA9876543210 -A 0123456789ABCDDCBA9876543210 \ + -R 192.0.2.0/24 -R 192.168.1.1/32 >> routingtable +------------------------------------------------------------------------------------------------ BUGS ---- diff --git a/src/man/anytun-controld.8.txt b/src/man/anytun-controld.8.txt index e97daac..2b1c7a1 100644 --- a/src/man/anytun-controld.8.txt +++ b/src/man/anytun-controld.8.txt @@ -10,13 +10,14 @@ SYNOPSIS *anytun-controld* [ *-h|--help* ] -[ *-f|--file* <path> ] -[ *-X|--control-host* < <host>[:port>] | :<port> > ] [ *-D|--nodaemonize* ] -[ *-C|--chroot* ] [ *-u|--username* <username> ] -[ *-H|--chroot-dir* <path> ] -[ *-P|--write-pid* <path> ] +[ *-g|--groupname* <groupname> ] +[ *-C|--chroot* <path> ] +[ *-P|--write-pid* <filename> ] +[ *-L|--log* <target>:<level>[,<param1>[,<param2>[..]]] ] +[ *-f|--file* <path> ] +[ *-X|--control-host* < <host>[:port>] | :<port> > ] DESCRIPTION ----------- @@ -26,49 +27,72 @@ DESCRIPTION OPTIONS ------- --f|--file <path> +-D|--nodaemonize ~~~~~~~~~~~~~~~~ -The path to the config file. +This option instructs *anytun* to run in foreground +instead of becoming a daemon which is the default. --X|--control-host < <host>[:<port>] | :<port> > -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-u|--username <username> +~~~~~~~~~~~~~~~~~~~~~~~~ -The local ip address and or tcp port to bind to. Mind that if an -address is given the port can be omitted in which case port 2323 -is used. You can also specify to listen on an specific port but on -all interfaces by omitting the address. If you want to specify an -ipv6 address and a port you have to use [ and ] to seperate the address -from the port, eg.: [::1]:1234. If you want to use the default port -[ and ] can be omitted. default: 127.0.0.1:2323 +run as this user. If no group is specified (*-g*) the default group of +the user is used. The default is to not drop privileges. --D|--nodaemonize -~~~~~~~~~~~~~~~~ +-g|--groupname <groupname> +~~~~~~~~~~~~~~~~~~~~~~~~~~ -This option instructs *anytun-controld* to run in the foreground -instead of becoming a daemon which is the default. +run as this group. If no username is specified (*-u*) this gets ignored. +The default is to not drop privileges. --C|--chroot -~~~~~~~~~~~ +-C|--chroot <path> +~~~~~~~~~~~~~~~~~~ -Instruct *anytun* to run in a chroot chail and drop privileges. The -default is not to run in chroot. +Instruct *anytun* to run in a chroot jail. The default is +to not run in chroot. --u|--username <username> -~~~~~~~~~~~~~~~~~~~~~~~~ +-P|--write-pid <filename> +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Instruct *anytun* to write it's pid to this file. The default is +to not create a pid file. + +-L|--log <target>:<level>[,<param1>[,<param2>[..]]] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -if chroot change to this user. default: nobody +add log target to logging system. This can be invoked several times +in order to log to different targets at the same time. Every target +hast its own log level which is a number between 0 and 5. Where 0 means +disabling log and 5 means debug messages are enabled. --H|--chroot-dir <directory> -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The following targets are supported: + +* *syslog* - log to syslog daemon, parameters <level>[,<logname>[,<facility>]] +* *file* - log to file, parameters <level>[,<path>] +* *stdout* - log to standard output, parameters <level> +* *stderr* - log to standard error, parameters <level> + +The file target can be used more the once with different levels. +If no target is provided at the command line a single target with the +following config is added: + +*syslog:3,uanytun,daemon* + +-f|--file <path> +~~~~~~~~~~~~~~~~ -chroot to this directory. default: /var/run/anytun-controld +The path to the file which holds the sync information. --P|--write-pid <path> -~~~~~~~~~~~~~~~~~~~~~ +-X|--control-host < <host>[:<port>] | :<port> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Instruct *anytun-controld* to write it's pid to this file. -The default is not to create a pid file. +The local ip address and or tcp port to bind to. Mind that if an +address is given the port can be omitted in which case port 2323 +is used. You can also specify to listen on an specific port but on +all interfaces by omitting the address. If you want to specify an +ipv6 address and a port you have to use [ and ] to seperate the address +from the port, eg.: [::1]:1234. If you want to use the default port +[ and ] can be omitted. default: 127.0.0.1:2323 BUGS diff --git a/src/man/anytun-showtables.8.txt b/src/man/anytun-showtables.8.txt index d7b1782..9a04f26 100644 --- a/src/man/anytun-showtables.8.txt +++ b/src/man/anytun-showtables.8.txt @@ -18,7 +18,7 @@ DESCRIPTION OPTIONS ------- -This Tool does not take any Options. It takes the sync information from +This Tool does not take any options. It takes the sync information from the standard input and prints the routing table to the standard output. EXAMPLES diff --git a/src/man/anytun.8.txt b/src/man/anytun.8.txt index 65f5c97..7890a50 100644 --- a/src/man/anytun.8.txt +++ b/src/man/anytun.8.txt @@ -11,21 +11,24 @@ SYNOPSIS *anytun* [ *-h|--help* ] [ *-D|--nodaemonize* ] -[ *-C|--chroot* ] [ *-u|--username* <username> ] -[ *-H|--chroot-dir* <directory> ] +[ *-g|--groupname* <groupname> ] +[ *-C|--chroot* <path> ] [ *-P|--write-pid* <filename> ] +[ *-L|--log* <target>:<level>[,<param1>[,<param2>[..]]] ] [ *-i|--interface* <ip-address> ] [ *-p|--port* <port> ] [ *-r|--remote-host* <hostname|ip> ] [ *-o|--remote-port* <port> ] +[ *-4|--ipv4-only* ] +[ *-6|--ipv6-only* ] [ *-I|--sync-interface* <ip-address> ] [ *-S|--sync-port* port> ] [ *-M|--sync-hosts* <hostname|ip>[:<port>][,<hostname|ip>[:<port>][...]] ] [ *-X|--control-host* <hostname|ip>[:<port>] [ *-d|--dev* <name> ] [ *-t|--type* <tun|tap> ] -[ *-n|--ifconfig* <local> <remote|netmask> ] +[ *-n|--ifconfig* <local>/<prefix> ] [ *-x|--post-up-script* <script> ] [ *-R|--route* <net>/<prefix length> ] [ *-m|--mux* <mux-id> ] @@ -33,10 +36,12 @@ SYNOPSIS [ *-w|--window-size* <window size> ] [ *-k|--kd-prf* <kd-prf type> ] [ *-l|--ld-kdr* <ld-kdr> ] -[ *-c|--cipher* <cipher type> ] -[ *-a|--auth-algo* <algo type> ] +[ *-O|--anytun02-compat* ] +[ *-E|--passphrase* <pass phrase> ] [ *-K|--key* <master key> ] [ *-A|--salt* <master salt> ] +[ *-c|--cipher* <cipher type> ] +[ *-a|--auth-algo* <algo type> ] DESCRIPTION ----------- @@ -57,30 +62,53 @@ passed to the daemon: -D|--nodaemonize ~~~~~~~~~~~~~~~~ -This option instructs *anytun* to run in the foreground +This option instructs *anytun* to run in foreground instead of becoming a daemon which is the default. --C|--chroot -~~~~~~~~~~~ - -Instruct *anytun* to run in a chroot chail and drop privileges. The -default is not to run in chroot. - -u|--username <username> ~~~~~~~~~~~~~~~~~~~~~~~~ -if chroot change to this user. default: nobody +run as this user. If no group is specified (*-g*) the default group of +the user is used. The default is to not drop privileges. --H|--chroot-dir <directory> -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-g|--groupname <groupname> +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +run as this group. If no username is specified (*-u*) this gets ignored. +The default is to not drop privileges. -chroot to this directory. default: /var/run/anytun +-C|--chroot <path> +~~~~~~~~~~~~~~~~~~ + +Instruct *anytun* to run in a chroot jail. The default is +to not run in chroot. -P|--write-pid <filename> ~~~~~~~~~~~~~~~~~~~~~~~~~ Instruct *anytun* to write it's pid to this file. The default is -not to create a pid file. +to not create a pid file. + +-L|--log <target>:<level>[,<param1>[,<param2>[..]]] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +add log target to logging system. This can be invoked several times +in order to log to different targets at the same time. Every target +hast its own log level which is a number between 0 and 5. Where 0 means +disabling log and 5 means debug messages are enabled. + +The following targets are supported: + +* *syslog* - log to syslog daemon, parameters <level>[,<logname>[,<facility>]] +* *file* - log to file, parameters <level>[,<path>] +* *stdout* - log to standard output, parameters <level> +* *stderr* - log to standard error, parameters <level> + +The file target can be used more the once with different levels. +If no target is provided at the command line a single target with the +following config is added: + +*syslog:3,uanytun,daemon* -i|--interface <ip address> ~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -122,6 +150,18 @@ The UDP port used for payload data by the remote host a port, it is automatically determined after receiving the first data packet. +-4|--ipv4-only +~~~~~~~~~~~~~~ + +Resolv to IPv4 addresses only. The default is to resolv both +IPv4 and IPv6 addresses. + +-6|--ipv6-only +~~~~~~~~~~~~~~ + +Resolv to IPv6 addresses only. The default is to resolv both +IPv4 and IPv6 addresses. + -I|--sync-interface <ip-address> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -180,8 +220,8 @@ from the port, eg.: [::1]:1234. If you want to use the default port ~~~~~~~~~~~~~~~ device name -By default, tap0 is used for Ethernet tunnel interfaces, -and tun0 for IP tunnels, respectively. This option can +By default, tapN is used for Ethernet tunnel interfaces, +and tunN for IP tunnels, respectively. This option can be used to manually override these defaults. -t|--type <tun|tap> @@ -192,25 +232,15 @@ device type Type of the tunnels to create. Use tap for Ethernet tunnels, tun for IP tunnels. --n|--ifconfig <local> <remote|netmask> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-n|--ifconfig <local>/<prefix> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *<local>* the local IP address for the tun/tap device -*<remote|netmask>* the remote IP address (tun) or netmask (tap) +*<prefix>* the prefix length of the network -In tap/Ethernet tunnel mode: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The local IP address and subnet mask of the tunnel -interface, in ifconfig style. The remote tunnel endpoint -has to use a different IP address in the same subnet. - -In tun/IP tunnel mode: - -The local IP address of the tunnel interface and the -IP address of the tunnel interface on the remote tunnel -endpoint. +The local IP address and prefix length. The remote tunnel endpoint +has to use a different IP address in the same subnet -x|--post-up-script <script> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -223,19 +253,19 @@ is created. By default no script will be executed. add a route to connection. This can be invoked several times. +-m|--mux <mux-id> +~~~~~~~~~~~~~~~~~ + +the multiplex id to use. default: 0 + -s|--sender-id <sender id> ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Each anycast tunnel endpoint needs a uniqe sender id (1, 2, 3, ...). It is needed to distinguish the senders -in case of replay attacks. This option is ignored by +in case of replay attacks. This option can be ignored on unicast endpoints. default: 0 --m|--mux <mux-id> -~~~~~~~~~~~~~~~~~ - -the multiplex id to use. default: 0 - -w|--window-size <window size> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -253,37 +283,6 @@ by filtering packets according to their secuence number. By default the sequence window is disabled and therefore a window size of 0 is used. --c|--cipher <cipher type> -~~~~~~~~~~~~~~~~~~~~~~~~~ - -payload encryption algorithm - -Encryption algorithm used for encrypting the payload - -Possible values: - -* *null* - no encryption -* *aes-ctr* - AES in counter mode with 128 Bits, default value -* *aes-ctr-128* - AES in counter mode with 128 Bits -* *aes-ctr-192* - AES in counter mode with 192 Bits -* *aes-ctr-256* - AES in counter mode with 256 Bits - --a|--auth-algo <algo type> -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -message authentication algorithm - -This option sets the message authentication algorithm. - -Possible values: - -* *null* - no message authentication -* *sha1* - HMAC-SHA1, default value - - -If HMAC-SHA1 is used, the packet length is increased by -10 bytes. These 10 bytes contain the authentication data. - -k|--kd--prf <kd-prf type> ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -304,66 +303,126 @@ Possible values: ~~~~~~~~~~~~~~~~~~~~ The log2 of the key derivation rate. This is used by the key -derivation to determine how ofen a new session key has to be +derivation to determine how often a new session key has to be generated. A value of -1 means to generate only one key and use it forever. The default is 0 which means to calculate a new key for every packet. A value of 1 would tell the key derivation to generate a new key after 2 packets, for 2 its 4 packets and so on. +-O|--anytun02-compat +~~~~~~~~~~~~~~~~~~~~ + +Enable compatibility mode with version of anytun 0.2.x and prior. +This is for backwards compaitbility to old internet draft of satp. + +-E|--passphrase <pass phrase> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This passphrase is used to generate the master key and master salt. +For the master key the last n bits of the SHA256 digest of the +passphrase (where n is the length of the master key in bits) is used. +The master salt gets generated with the SHA1 digest. +You may force a specific key and or salt by using *--key* and *--salt*. + -K|--key <master key> ~~~~~~~~~~~~~~~~~~~~~ -master key to use for encryption +master key to use for key derivation Master key in hexadecimal notation, eg 01a2b3c4d5e6f708a9b0cadbecfd0fa1, with a mandatory length -of 32 characters (16 bytes). +of 32, 48 or 64 characters (128, 192 or 256 bits). -A|--salt <master salt> ~~~~~~~~~~~~~~~~~~~~~~~ -master salt to use for encryption +master salt to use for key derivation Master salt in hexadecimal notation, eg 01a2b3c4d5e6f708a9b0cadbecfd, with a mandatory length of 28 characters (14 bytes). +-c|--cipher <cipher type> +~~~~~~~~~~~~~~~~~~~~~~~~~ + +payload encryption algorithm + +Encryption algorithm used for encrypting the payload + +Possible values: + +* *null* - no encryption +* *aes-ctr* - AES in counter mode with 128 Bits, default value +* *aes-ctr-128* - AES in counter mode with 128 Bits +* *aes-ctr-192* - AES in counter mode with 192 Bits +* *aes-ctr-256* - AES in counter mode with 256 Bits + +-a|--auth-algo <algo type> +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message authentication algorithm + +This option sets the message authentication algorithm. + +Possible values: + +* *null* - no message authentication +* *sha1* - HMAC-SHA1, default value + +If HMAC-SHA1 is used, the packet length is increased by +10 bytes. These 10 bytes contain the authentication data. + + EXAMPLES -------- +P2P Setup between two unicast enpoints: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Host A: +^^^^^^^ + +anytun -r hostb.example.com -t tun -n 192.168.123.1/30 -c aes-ctr-256 -k aes-ctr-256 \ + -E have_a_very_safe_and_productive_day + +Host B: +^^^^^^^ +anytun -r hosta.example.com -t tun -n 192.168.123.2/30 -c aes-ctr-256 -k aes-ctr-256 \ + -E have_a_very_safe_and_productive_day + + One unicast and one anycast tunnel endpoint: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Unicast tunnel endpoint: ^^^^^^^^^^^^^^^^^^^^^^^^ -anytun -r anycast.anytun.org -d anytun0 -t tun -n 192.0.2.2 -192.0.2.1 -w 0 -c null +anytun -r anycast.anytun.org -d anytun0 -t tun -n 192.0.2.2/30 -a null -c null -w 0 Anycast tunnel endpoints: ^^^^^^^^^^^^^^^^^^^^^^^^^ On the host with unicast hostname unicast1.anycast.anytun.org and anycast hostname anycast.anytun.org: --------------------------------------------------------------------------------------- -# anytun -i anycast.anytun.org -d anytun0 -t tun -n 192.0.2.1 192.0.2.2 -w 0 -S 2342 \ - -M unicast2.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 --------------------------------------------------------------------------------------- +--------------------------------------------------------------------------------------- +# anytun -i anycast.anytun.org -d anytun0 -t tun -n 192.0.2.1/30 -a null -c null -w 0 \ + -S 2342 -M unicast2.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 +--------------------------------------------------------------------------------------- On the host with unicast hostname unicast2.anycast.anytun.org and anycast hostname anycast.anytun.org: --------------------------------------------------------------------------------------- -# anytun -i anycast.anytun.org -d anytun0 -t tun -n 192.0.2.1 192.0.2.2 -w 0 -S 2342 \ - -M unicast1.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 --------------------------------------------------------------------------------------- +--------------------------------------------------------------------------------------- +# anytun -i anycast.anytun.org -d anytun0 -t tun -n 192.0.2.1/30 -a null -c null -w 0 \ + -S 2342 -M unicast1.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 +--------------------------------------------------------------------------------------- On the host with unicast hostname unicast3.anycast.anytun.org and anycast hostname anycast.anytun.org: --------------------------------------------------------------------------------------- -# anytun -i anycast.anytun.org -d anytun0 -t tun -n 192.0.2.1 192.0.2.2 -w 0 -S 2342 \ - -M unicast1.anycast.anytun.org:2342,unicast2.anycast.anytun.org:2342 --------------------------------------------------------------------------------------- +--------------------------------------------------------------------------------------- +# anytun -i anycast.anytun.org -d anytun0 -t tun -n 192.0.2.1/30 -a null -c null -w 0 \ + -S 2342 -M unicast1.anycast.anytun.org:2342,unicast2.anycast.anytun.org:2342 +--------------------------------------------------------------------------------------- For more sophisticated examples (like multiple unicast endpoints to one anycast tunnel endpoint) please consult the man page of anytun-config(8). |