diff options
Diffstat (limited to 'src/man/anyrtpproxy.8.txt')
-rw-r--r-- | src/man/anyrtpproxy.8.txt | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/src/man/anyrtpproxy.8.txt b/src/man/anyrtpproxy.8.txt deleted file mode 100644 index a92d2e6..0000000 --- a/src/man/anyrtpproxy.8.txt +++ /dev/null @@ -1,150 +0,0 @@ -anyrtpproxy(8) -============== - -NAME ----- -anyrtpproxy - anycast rtpproxy - -SYNOPSIS --------- - -.... -anyrtpproxy - [ -h|--help ] - [ -D|--nodaemonize ] - [ -C|--chroot ] - [ -u|--username <username> ] - [ -H|--chroot-dir <directory> ] - [ -P|--write-pid <filename> ] - [ -i|--interface <ip-address> ] - [ -s|--control <hostname|ip>[:<port>] ] - [ -p|--port-range <start> <end> ] - [ -n|--nat ] - [ -o|--no-nat-once ] - [ -S|--sync-port port> ] - [ -M|--sync-hosts <hostname|ip>:<port>[,<hostname|ip>:<port>[...]] ] -.... - - -DESCRIPTION ------------ - -*anyrtpproxy* is a rtpproxy which can be used in combination with anycast. It uses -the same control protocol than rtpproxy though it can be controled through the nathelper -plugin of openser. *anyrtpproxy* uses the same synchronisation protocol than *Anytun* -to sync the session information among all anycast instances. - - -OPTIONS -------- - -*-D, --nodaemonize*:: - This option instructs *anyrtpproxy* to run in the foreground - instead of becoming a daemon. - -*-C, --chroot*:: - chroot and drop privileges - -*-u, --username <username>*:: - if chroot change to this user - -*-H, --chroot-dir <directory>*:: - chroot to this directory - -*-P, --write-pid <filename>*:: - write pid to this file - -*-i, --interface <ip address>*:: - The local interface to listen on for RTP packets - -*-s, --control <hostname|ip>[:<port>]*:: - The local address and port to listen on for control messages from openser - -*-p, --port-range <start> <end>*:: - A pool of ports which should be used by *anyrtpproxy* to relay RTP packets. - The range may not overlap between the anycast instances - -*-n, --nat*:: - Allow to learn the remote address and port in order to handle clients behind nat. - This option should only be enabled if the source is authenticated (i.e. through - *anytun*) - -*-o, --no-nat-once*:: - Disable learning of remote address and port in case the first packet does not - come from the client which is specified by openser during configuration. Invoking - this parameter increases the security level of the system but in case of nat needs - a working nat transversal such as stun. - -*-S, --sync-port <port>*:: - local unicast(sync) port to bind to + - This port is used by anycast hosts to synchronize information about tunnel - endpoints. No payload data is transmitted via this port. + - It is possible to obtain a list of active connections by telnetting into - this port. This port is read-only and unprotected by default. It is advised - to protect this port using firewall rules and, eventually, IPsec. - -*-M, --sync-hosts <hostname|ip>:<port>,[<hostname|ip>:<port>[...]]*:: - remote hosts to sync with + - Here, one has to specify all unicast IP addresses of all - other anycast hosts that comprise the anycast tunnel endpoint. - -EXAMPLES --------- - -Anycast Setup with 3 instances: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -On the host with unicast hostname unicast1.anycast.anytun.org and anycast -hostname anycast.anytun.org: --------------------------------------------------------------------------------------- -# anyrtpproxy -i anycast.anytun.org -p 20000 25000 -S 2342 \ - -M unicast2.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 --------------------------------------------------------------------------------------- - -On the host with unicast hostname unicast2.anycast.anytun.org and anycast -hostname anycast.anytun.org: --------------------------------------------------------------------------------------- -# anyrtpproxy -i anycast.anytun.org -p 25000 30000 -S 2342 \ - -M unicast1.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 --------------------------------------------------------------------------------------- - -On the host with unicast hostname unicast3.anycast.anytun.org and anycast -hostname anycast.anytun.org: --------------------------------------------------------------------------------------- -# anyrtpproxy -i anycast.anytun.org -p 30000 35000 -S 2342 \ - -M unicast1.anycast.anytun.org:2342,unicast2.anycast.anytun.org:2342 --------------------------------------------------------------------------------------- - - -BUGS ----- -Most likely there are some bugs in *anyrtpproxy*. If you find a bug, please let -the developers know at satp@anytun.org. Of course, patches are preferred. - -SEE ALSO --------- -anytun(8) - -AUTHORS -------- - -Othmar Gsenger <otti@anytun.org> -Erwin Nindl <nine@anytun.org> -Christian Pointner <equinox@anytun.org> - - -RESOURCES ---------- - -Main web site: http://www.anytun.org/ - - -COPYING -------- - -Copyright \(C) 2007-2009 Othmar Gsenger, Erwin Nindl and Christian -Pointner. This program is free software: you can redistribute it -and/or modify it under the terms of the GNU General Public License -as published by the Free Software Foundation, either version 3 of -the License, or any later version. - |