7 files changed, 0 insertions, 347 deletions
diff --git a/openvpn/contrib/README b/openvpn/contrib/README
deleted file mode 100644
index e1a57d0..0000000
--- a/openvpn/contrib/README
+++ /dev/null
@@ -1,2 +0,0 @@
-This directory contains scripts and patches contributed
-by users.
diff --git a/openvpn/contrib/multilevel-init.patch b/openvpn/contrib/multilevel-init.patch
deleted file mode 100644
index 8d48fbc..0000000
--- a/openvpn/contrib/multilevel-init.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- /etc/init.d/openvpn	2004-05-12 20:30:06.000000000 +0200
-+++ openvpn	2004-05-12 20:34:33.000000000 +0200
-@@ -58,13 +58,13 @@
- #     returning success or failure status to caller (James Yonan).
- 
- # Location of openvpn binary
--openvpn="/usr/sbin/openvpn"
-+openvpn=/usr/sbin/openvpn
- 
- # Lockfile
--lock="/var/lock/subsys/openvpn"
-+lock=/var/lock/subsys/openvpn
- 
- # PID directory
--piddir="/var/run/openvpn"
-+piddir=/var/run/openvpn
- 
- # Our working directory
- work=/etc/openvpn
-@@ -106,7 +106,7 @@
- 
- 	if [ -f $lock ]; then
- 	    # we were not shut down correctly
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 	      if [ -s $pidf ]; then
- 		kill `cat $pidf` >/dev/null 2>&1
- 	      fi
-@@ -116,12 +116,12 @@
- 	    sleep 2
- 	fi
- 
--	rm -f $piddir/*.pid $piddir/*/*.pid
-+	find $piddir -name "*.pid"|xargs rm -f
- 
- 	# Start every .conf in $work and run .sh if exists
- 	errors=0
- 	successes=0
--	for c in `/bin/ls *.conf */*.conf 2>/dev/null`; do
-+	for c in `find * -name "*.conf" 2>/dev/null`; do
- 	    bn=${c%%.conf}
- 	    if [ -f "$bn.sh" ]; then
- 		. $bn.sh
-@@ -147,7 +147,7 @@
- 	;;
-   stop)
- 	echo -n $"Shutting down openvpn: "
--	for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 	  if [ -s $pidf ]; then
- 	    kill `cat $pidf` >/dev/null 2>&1
- 	  fi
-@@ -163,7 +163,7 @@
- 	;;
-   reload)
- 	if [ -f $lock ]; then
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 		if [ -s $pidf ]; then
- 		    kill -HUP `cat $pidf` >/dev/null 2>&1
- 		fi
-@@ -175,7 +175,7 @@
- 	;;
-   reopen)
- 	if [ -f $lock ]; then
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 		if [ -s $pidf ]; then
- 		    kill -USR1 `cat $pidf` >/dev/null 2>&1
- 		fi
-@@ -195,7 +195,7 @@
- 	;;
-   status)
- 	if [ -f $lock ]; then
--	    for pidf in `/bin/ls $piddir/*.pid $piddir/*/*.pid 2>/dev/null`; do
-+	    for pidf in `find $piddir -name "*.pid" 2>/dev/null`; do
- 		if [ -s $pidf ]; then
- 		    kill -USR2 `cat $pidf` >/dev/null 2>&1
- 		fi
diff --git a/openvpn/contrib/openvpn-fwmarkroute-1.00/README b/openvpn/contrib/openvpn-fwmarkroute-1.00/README
deleted file mode 100644
index 66fe61a..0000000
--- a/openvpn/contrib/openvpn-fwmarkroute-1.00/README
+++ /dev/null
@@ -1,44 +0,0 @@
-OpenVPN fwmark Routing
-Sean Reifschneider, <jafo@tummy.com>
-Thursday November 27, 2003
-==========================
-
-These scripts can be used with OpenVPN up and down scripts to set up
-routing on a Linux system such that the VPN traffic is sent via normal
-network connectivity, but other traffic to that network runs over the VPN.
-The idea is to allow encryption of data to the network the remote host is
-on, without interfering with the VPN traffic.  You can't simply add a route
-to the remote network, becaues that will cause the VPN traffic to also try
-to run over the VPN, and breaks the VPN.
-
-These scripts use the Linux "fwmark" iptables rules to specify routing
-based not only on IP address, but also by port and protocol.  This allows
-you to effectively say "if the packet is to this IP address on this port
-using this protocol, then use the normal default gateway, otherwise use the
-VPN gateway.
-
-This is set up on the client VPN system, not the VPN server.  These scripts
-also set up all ICMP echo-responses to run across the VPN.  You can
-comment the lines in the scripts to disable this, but I find this useful
-at coffee shops which have networks that block ICMP.
-
-To configure this, you need to set up these scripts as your up and down
-scripts in the config file.  You will need to set these values in the
-config file:
-
-   up /etc/openvpn/fwmarkroute.up
-   down /etc/openvpn/fwmarkroute.down
-   up-restart
-   up-delay
-
-   setenv remote_netmask_bits 24
-
-Note: For this to work, you can't set the "user" or "group" config options,
-because then the scripts will not run as root.
-
-The last setting allows you to control the size of the network the remote
-system is on.  The remote end has to be set up to route, probably with
-masquerading or NAT.  The network this netmask relates to is calculated
-using the value of "remote" in the conf file.
-
-Sean
diff --git a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down b/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down
deleted file mode 100755
index 87d67d4..0000000
--- a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-#  Bring down vpn routing.
-
-#  calculate the network address
-remote_network=`ipcalc -n "$remote"/"$remote_netmask_bits"`
-remote_network="${remote_network#*=}"
-
-#  clear routing via VPN
-ip route del "$remote_network"/"$remote_netmask_bits" via "$5" table vpn.out
-ip route del table vpnonly.out via "$5"
-iptables -D OUTPUT -t mangle -p "$proto" \
-		-d "$remote_network"/"$remote_netmask_bits" \
-		--dport "$remote_port" -j ACCEPT
-iptables -D OUTPUT -t mangle -d "$remote" -j MARK --set-mark 2
-
-#  undo the ICMP ping tunneling
-iptables -D OUTPUT -t mangle --protocol icmp --icmp-type echo-request \
-		-j MARK --set-mark 3
-
-#  flush route cache
-ip route flush cache
diff --git a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up b/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up
deleted file mode 100755
index 661ec31..0000000
--- a/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  Bring up vpn routing.
-
-#  calculate the network address
-remote_network=`ipcalc -n "$remote"/"$remote_netmask_bits"`
-remote_network="${remote_network#*=}"
-
-#  add the stuff that doesn't change if it's not already there
-grep -q '^202 ' /etc/iproute2/rt_tables 
-if [ "$?" -ne 0 ]
-then
-	echo 202 vpn.out >> /etc/iproute2/rt_tables
-fi
-grep -q '^203 ' /etc/iproute2/rt_tables 
-if [ "$?" -ne 0 ]
-then
-	echo 203 vpnonly.out >> /etc/iproute2/rt_tables
-fi
-ip rule ls | grep -q 'lookup vpn.out *$'
-if [ "$?" -ne 0 ]
-then
-	ip rule add fwmark 2 table vpn.out
-fi
-ip rule ls | grep -q 'lookup vpnonly.out *$'
-if [ "$?" -ne 0 ]
-then
-	ip rule add fwmark 3 table vpnonly.out
-fi
-
-#  route VPN traffic using the normal table
-iptables -A OUTPUT -t mangle -p "$proto" -d "$remote" --dport "$remote_port" \
-		-j ACCEPT
-
-#  route all other traffic to that host via VPN
-iptables -A OUTPUT -t mangle -d "$remote_network"/"$remote_netmask_bits" \
-		-j MARK --set-mark 2
-
-#  route all ICMP pings over the VPN
-iptables -A OUTPUT -t mangle --protocol icmp --icmp-type echo-request \
-		-j MARK --set-mark 3
-
-#  NAT traffic going over the VPN, so it doesn't have an unknown address
-iptables -t nat -A POSTROUTING -o "$1" -j SNAT --to-source "$4"
-
-#  add routing commands
-ip route add "$remote_network"/"$remote_netmask_bits" via "$5" table vpn.out
-ip route add table vpnonly.out via "$5"
-ip route flush cache
diff --git a/openvpn/contrib/pull-resolv-conf/client.down b/openvpn/contrib/pull-resolv-conf/client.down
deleted file mode 100644
index d51472f..0000000
--- a/openvpn/contrib/pull-resolv-conf/client.down
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2005 by OpenVPN Solutions LLC
-# Licensed under the GPL version 2
-
-# First version by Jesse Adelman
-# someone at boldandbusted dink com
-# http://www.boldandbusted.com/
-
-# PURPOSE: This script automatically removes the /etc/resolv.conf entries previously
-# set by the companion script "client.up".
-
-# INSTALL NOTES:
-# Place this in /etc/openvpn/client.down
-# Then, add the following to your /etc/openvpn/<clientconfig>.conf:
-#   client
-#   pull dhcp-options
-#   up /etc/openvpn/client.up
-#   down /etc/openvpn/client.down
-# Next, "chmod a+x /etc/openvpn/client.down"
-
-# USAGE NOTES:
-# Note that this script is best served with the companion "client.up"
-# script.
-
-# Only tested on Gentoo Linux 2005.0 with OpenVPN 2.0
-# It should work with any GNU/Linux with /etc/resolv.conf
-
-# This runs with the context of the OpenVPN UID/GID 
-# at the time of execution. This generally means that
-# the client "up" script will run fine, but the "down" script
-# will require the use of the OpenVPN "down-root" plugin
-# which is in the plugins/ directory of the OpenVPN source tree
-
-# A horrid work around, from a security perspective,
-# is to run OpenVPN as root. THIS IS NOT RECOMMENDED. You have
-# been WARNED.
-
-# init variables
-
-i=1
-j=1
-unset fopt
-unset dns
-unset opt
-
-# Convert ENVs to an array
-
-while fopt=foreign_option_$i; [ -n "${!fopt}" ]; do
-{
-	opt[i-1]=${!fopt}
-	case ${opt[i-1]} in
-		*DOMAIN* ) domain=`echo ${opt[i-1]} | \
-				sed -e 's/dhcp-option DOMAIN //g'` ;;
-		*DNS*    ) dns[j-1]=`echo ${opt[i-1]} | \
-				sed -e 's/dhcp-option DNS //g'`
-			       let j++ ;;
-	esac
-	let i++
-}
-done
-
-# Now, do the work
-
-if [ -n "${dns[*]}" ]; then
-	for i in "${dns[@]}"; do
-		sed -i -e "/nameserver ${i}/D" /etc/resolv.conf || die
-	done
-fi
-
-if [ -n "${domain}" ]; then
-	sed -i -e "/search ${domain}/D" /etc/resolv.conf || die
-fi
-
-# all done...
-exit 0
diff --git a/openvpn/contrib/pull-resolv-conf/client.up b/openvpn/contrib/pull-resolv-conf/client.up
deleted file mode 100644
index 48b1a39..0000000
--- a/openvpn/contrib/pull-resolv-conf/client.up
+++ /dev/null
@@ -1,75 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2005 by OpenVPN Solutions LLC
-# Licensed under the GPL version 2
-
-# First version by Jesse Adelman
-# someone at boldandbusted dink com
-# http://www.boldandbusted.com/
-
-# PURPOSE: This script automatically sets the proper /etc/resolv.conf entries
-# as pulled down from an OpenVPN server.
-
-# INSTALL NOTES:
-# Place this in /etc/openvpn/client.up
-# Then, add the following to your /etc/openvpn/<clientconfig>.conf:
-#   client
-#   pull dhcp-options
-#   up /etc/openvpn/client.up
-# Next, "chmod a+x /etc/openvpn/client.up"
-
-# USAGE NOTES:
-# Note that this script is best served with the companion "client.down"
-# script.
-
-# Only tested on Gentoo Linux 2005.0 with OpenVPN 2.0
-# It should work with any GNU/Linux with /etc/resolv.conf
-
-# This runs with the context of the OpenVPN UID/GID 
-# at the time of execution. This generally means that
-# the client "up" script will run fine, but the "down" script
-# will require the use of the OpenVPN "down-root" plugin
-# which is in the plugins/ directory of the OpenVPN source tree
-
-# A horrid work around, from a security perspective,
-# is to run OpenVPN as root. THIS IS NOT RECOMMENDED. You have
-# been WARNED.
-
-# init variables
-
-i=1
-j=1
-unset fopt
-unset dns
-unset opt
-
-# Convert ENVs to an array
-
-while fopt=foreign_option_$i; [ -n "${!fopt}" ]; do
-{
-	opt[i-1]=${!fopt}
-	case ${opt[i-1]} in
-		*DOMAIN* ) domain=`echo ${opt[i-1]} | \
-				sed -e 's/dhcp-option DOMAIN //g'` ;;
-		*DNS*    ) dns[j-1]=`echo ${opt[i-1]} | \
-				sed -e 's/dhcp-option DNS //g'`
-			       let j++ ;;
-	esac
-	let i++
-}
-done
-
-# Now, do the work
-
-if [ -n "${dns[*]}" ]; then
-	for i in "${dns[@]}"; do
-		sed -i -e "1,1 i nameserver ${i}" /etc/resolv.conf || die
-	done
-fi
-
-if [ -n "${domain}" ]; then
-	sed -i -e "$j,1 i search ${domain}" /etc/resolv.conf || die
-fi
-
-# all done...
-exit 0