diff options
Diffstat (limited to 'man')
-rw-r--r-- | man/Makefile | 10 | ||||
-rw-r--r-- | man/anytun.txt | 294 |
2 files changed, 0 insertions, 304 deletions
diff --git a/man/Makefile b/man/Makefile deleted file mode 100644 index 1b3a824..0000000 --- a/man/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -all: manpage - -docbook: anytun.txt - asciidoc -b docbook -d manpage anytun.txt - -manpage: docbook - xmlto man anytun.xml - -clean: - rm -f anytun.8 anytun.xml diff --git a/man/anytun.txt b/man/anytun.txt deleted file mode 100644 index bdd8f3b..0000000 --- a/man/anytun.txt +++ /dev/null @@ -1,294 +0,0 @@ -anytun(8) -========= - -NAME ----- -anytun - anycast tunneling daemon - -SYNOPSIS --------- - -anytun [-h|--help] - [-D|--nodaemonize] - [-s|--sender-id ] <sender id> - [-i|--interface] <ip-address> - [-p|--port] <port> - [-I|--sync-interface] <ip-address> - [-S|--sync-port] <port> - [-M|--sync-hosts] <hostname|ip>:<port>[,<hostname|ip>:<port>[...]] - - [-r|--remote-host] <hostname|ip> - [-o|--remote-port] <port> - [-d|--dev] <name> - [-t|--type] <tun|tap> - [-n|--ifconfig] <local> - <remote|netmask> - [-w|--window-size] <window size> - [-c|--cipher] <cipher type> - [-K|--key] <master key> - [-A|--salt] <master salt> - [-k|--kd-prf] <kd-prf type> - [-a|--auth-algo] <algo type> - -DESCRIPTION ------------ - -Anytun is an implementation of the Secure Anycast Tunneling Protocol -(SATP). Anycast provides a complete VPN solution similar to OpenVPN or -IPsec in tunnel mode. The main difference is that anycast enables the -setup of tunnels between an arbitrary combination of anycast, unicast -and multicast hosts. - -OPTIONS -------- - -Anytun has been designed as a peer to peer application, so there is -no difference between client and server. The following options can be -passed to the daemon: - - [-D|--nodaemonize] - - This option instructs anytun to run in the foreground - instead of becoming a daemon. - - [-s|--sender-id ] <sender id> - - Each anycast tunnel endpoint needs a uniqe sender id - (1, 2, 3, ...). It is needed to distinguish the senders - in case of replay attacks. This option is ignored by - unicast endpoints. - - [-i|--interface] <ip address> - - This IP address is used as the sender address for outgoing - packets. In case of anycast tunnel endpoints, the anycast - IP has to be used. In case of unicast endpoints, the - address is usually derived correctly from the routing - table. - - [-p|--port] <port> - - local anycast(data) port to bind to - - The local UDP port that is used to send and receive the - payload data. The two tunnel endpoints can use different - ports. If a tunnel endpoint consists of multiple anycast - hosts, all hosts have to use the same port. - - [-I|--sync-interface] <ip-address> - - local unicast(sync) ip address to bind to - - This option is only needed for tunnel endpoints consisting - of multiple anycast hosts. The unicast IP address of - the anycast host can be used here. This is needed for - communication with the other anycast hosts. - - [-S|--sync-port] <port> - - local unicast(sync) port to bind to - - This option is only needed for tunnel endpoints - consisting of multiple anycast hosts. This port is used - by anycast hosts to synchronize information about tunnel - endpoints. No payload data is transmitted via this port. - - It is possible to obtain a list of active connections - by telnetting into this port. This port is read-only - and unprotected by default. It is advised to protect - this port using firewall rules and, eventually, IPsec. - - [-M|--sync-hosts] <hostname|ip>:<port>[,<hostname|ip>:<port>[...]] - - remote hosts to sync with - - This option is only needed for tunnel endpoints consisting - of multiple anycast hosts. Here, one has to specify all - unicast IP addresses of all other anycast hosts that - comprise the anycast tunnel endpoint. - - [-r|--remote-host] <hostname|ip> - - remote host - - This option can be used to specify the remote tunnel - endpoint. In case of anycast tunnel endpoints, the - anycast IP address has to be used. If you do not specify - an address, it is automatically determined after receiving - the first data packet. - - [-o|--remote-port] <port> - - remote port - - The UDP port used for payload data by the remote host - (specified with -p on the remote host). - - [-d|--dev] <name> - - device name - - By default, tap0 is used for Ethernet tunnel interfaces, - and tun0 for IP tunnels, respectively. This option can - be used to manually override these defaults. - - [-t|--type] <tun|tap> - - device type - - Type of the tunnels to create. Use tap for Ethernet - tunnels, tun for IP tunnels. - - [-n|--ifconfig] - - [-n|--ifconfig] <local> the local IP address - for the tun/tap - device - <remote|netmask> the remote IP address - (tun) or netmask - (tap) - - In tap/Ethernet tunnel mode: - - The local IP address and subnet mask of the tunnel - interface, in ifconfig style. The remote tunnel endpoint - has to use a different IP address in the same subnet. - - In tun/IP tunnel mode: - - The local IP address of the tunnel interface ant the - IP address of the tunnel interface on the remote tunnel - endpoint. - - [-w|--window-size] <window size> - - seqence window size - - Sometimes, packets arrive out of order on the receiver - side. This option defines the size of a list of received - packets' sequence numbers. If, according to this list, - a received packet has been previously received or has - been transmitted in the past, and is therefore not in - the list anymore, this is interpreted as a replay attack - and the packet is dropped. A value of 0 deactivates this - list and, as a consequence, the replay protection employed - by filtering packets according to their secuence number. - - [-c|--cipher] <cipher type> - - payload encryption algorithm - - Encryption algorithm used for encrypting the payload - - Possible values: - - * null - no encryption - * aes-ctr - AES in counter mode - - [-K|--key] <master key> - - master key to use for encryption - - Master key in hexadecimal notation, eg - 01a2b3c4d5e6f708a9b0cadbecfd0fa1, with a mandatory length - of 32 characters (16 bytes). - - [-A|--salt] <master salt> - - master salt to use for encryption - - Master salt in hexadecimal notation, eg - 01a2b3c4d5e6f708a9b0cadbecfd, with a mandatory length - of 28 characters (14 bytes). - - [-a|--auth-algo] <algo type> - - message authentication algorithm - - This option sets the message authentication algorithm. - - Possible values: - - * null - no message authentication - * sha1 - HMAC-SHA1 - - If HMAC-SHA1 is used, the packet length is increased by - 10 bytes. These 10 bytes contain the authentication data. - -EXAMPLES --------- - -One unicast and one anycast tunnel endpoint: - -Unicast tunnel endpoint: - - anytun -r anycast.anytun.org -d anytun0 -t tun -n 192.0.2.2 - 192.0.2.1 -w 0 -c null - - -Anycast tunnel endpoints: - -On the host with unicast hostname unicast1.anycast.anytun.org and anycast -hostname anycast.anytun.org - - anytun -i anycast.anytun.org -d anytun0 -t \ - tun -n 192.0.2.1 192.0.2.2 -w 0 -S 2342 -M \ - unicast2.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 - -On the host with unicast hostname unicast2.anycast.anytun.org and anycast -hostname anycast.anytun.org - - anytun -i anycast.anytun.org -d anytun0 -t \ - tun -n 192.0.2.1 192.0.2.2 -w 0 -S 2342 -M \ - unicast1.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342 - -On the host with unicast hostname unicast3.anycast.anytun.org and anycast -hostname anycast.anytun.org - - anytun -i anycast.anytun.org -d anytun0 -t \ - tun -n 192.0.2.1 192.0.2.2 -w 0 -S 2342 -M \ - unicast1.anycast.anytun.org:2342,unicast2.anycast.anytun.org:2342 - -For more sophisticated examples (like multiple unicast endpoints to one -anycast tunnel endpoint) please consult the man page of anytun-config(8). - - -BUGS ----- -Most likely there are some bugs in anytun. If you find a bug, please let -the developers know at satp@anytun.org. Of course, patches are preferred. - -SEE ALSO --------- -anytun-config(8), anytun-controld(8), anytun-showtables(8) - -AUTHORS -------- -Design of SATP and wizards of this implementation: - -Othmar Gsenger <otti@anytun.org> -Erwin Nindl <nine@anytun.org> -Christian Pointner <equinox@anytun.org> - -Debian packaging: - -Andreas Hirczy <ahi@itp.tu-graz.ac.at> - -Manual page: - -Alexander List <alex@debian.org> - -RESOURCES ---------- - -Main web site: http://www.anytun.org/ - - -COPYING -------- - -Copyright (C) 2007-2008 Othmar Gsenger, Erwin Nindl and Christian -Pointner. This program is free software; you can redistribute -it and/or modify it under the terms of the GNU General Public License -version 2 as published by the Free Software Foundation. - |