added manpage to svn (and later to release tarball)

moved manpages to doc directory

1 files changed, 0 insertions, 150 deletions

diff --git a/src/man/anyrtpproxy.8.txt b/src/man/anyrtpproxy.8.txt
deleted file mode 100644
index a92d2e6..0000000
--- a/src/man/anyrtpproxy.8.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-anyrtpproxy(8)
-==============
-
-NAME
-----
-anyrtpproxy - anycast rtpproxy
-
-SYNOPSIS
---------
-
-....
-anyrtpproxy
-  [ -h|--help ]
-  [ -D|--nodaemonize ]
-  [ -C|--chroot ]
-  [ -u|--username <username> ]
-  [ -H|--chroot-dir <directory> ]
-  [ -P|--write-pid <filename> ]
-  [ -i|--interface <ip-address> ]
-  [ -s|--control <hostname|ip>[:<port>] ]
-  [ -p|--port-range <start> <end> ]
-  [ -n|--nat ]
-  [ -o|--no-nat-once ]
-  [ -S|--sync-port port> ]
-  [ -M|--sync-hosts <hostname|ip>:<port>[,<hostname|ip>:<port>[...]] ]
-....
-
-
-DESCRIPTION
------------
-
-*anyrtpproxy* is a rtpproxy which can be used in combination with anycast. It uses
-the same control protocol than rtpproxy though it can be controled through the nathelper
-plugin of openser. *anyrtpproxy* uses the same synchronisation protocol than *Anytun* 
-to sync the session information among all anycast instances.
-
-
-OPTIONS
--------
-
-*-D, --nodaemonize*::
-   This option instructs *anyrtpproxy* to run in the foreground
-   instead of becoming a daemon.
-
-*-C, --chroot*::
-   chroot and drop privileges
-
-*-u, --username <username>*::
-   if chroot change to this user
-
-*-H, --chroot-dir <directory>*::
-   chroot to this directory
-
-*-P, --write-pid <filename>*::
-   write pid to this file
-
-*-i, --interface <ip address>*::
-  The local interface to listen on for RTP packets
-
-*-s, --control <hostname|ip>[:<port>]*::
-   The local address and port to listen on for control messages from openser
-
-*-p, --port-range <start> <end>*::
-   A pool of ports which should be used by *anyrtpproxy* to relay RTP packets. 
-   The range may not overlap between the anycast instances
-
-*-n, --nat*::
-   Allow to learn the remote address and port in order to handle clients behind nat.
-   This option should only be enabled if the source is authenticated (i.e. through 
-   *anytun*) 
-
-*-o, --no-nat-once*::
-   Disable learning of remote address and port in case the first packet does not 
-   come from the client which is specified by openser during configuration. Invoking
-   this parameter increases the security level of the system but in case of nat needs
-   a working nat transversal such as stun.
-
-*-S, --sync-port <port>*::
-   local unicast(sync) port to bind to +
-   This port is used by anycast hosts to synchronize information about tunnel
-   endpoints. No payload data is transmitted via this port. +
-   It is possible to obtain a list of active connections by telnetting into 
-   this port. This port is read-only and unprotected by default. It is advised 
-   to protect this port using firewall rules and, eventually, IPsec.
-
-*-M, --sync-hosts <hostname|ip>:<port>,[<hostname|ip>:<port>[...]]*::
-   remote hosts to sync with +
-   Here, one has to specify all unicast IP addresses of all 
-   other anycast hosts that comprise the anycast tunnel endpoint.
-
-EXAMPLES
---------
-
-Anycast Setup with 3 instances:
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-On the host with unicast hostname unicast1.anycast.anytun.org and anycast 
-hostname anycast.anytun.org:
---------------------------------------------------------------------------------------
-# anyrtpproxy -i anycast.anytun.org -p 20000 25000 -S 2342 \
-              -M unicast2.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342
---------------------------------------------------------------------------------------
-
-On the host with unicast hostname unicast2.anycast.anytun.org and anycast
-hostname anycast.anytun.org:
---------------------------------------------------------------------------------------
-# anyrtpproxy -i anycast.anytun.org -p 25000 30000 -S 2342 \
-              -M unicast1.anycast.anytun.org:2342,unicast3.anycast.anytun.org:2342
---------------------------------------------------------------------------------------
-
-On the host with unicast hostname unicast3.anycast.anytun.org and anycast
-hostname anycast.anytun.org:
---------------------------------------------------------------------------------------
-# anyrtpproxy -i anycast.anytun.org -p 30000 35000 -S 2342 \
-              -M unicast1.anycast.anytun.org:2342,unicast2.anycast.anytun.org:2342
---------------------------------------------------------------------------------------
-
-
-BUGS
-----
-Most likely there are some bugs in *anyrtpproxy*. If you find a bug, please let
-the developers know at satp@anytun.org. Of course, patches are preferred.
-
-SEE ALSO
---------
-anytun(8)
-
-AUTHORS
--------
-
-Othmar Gsenger <otti@anytun.org>
-Erwin Nindl <nine@anytun.org>
-Christian Pointner <equinox@anytun.org>
-
-
-RESOURCES
----------
-
-Main web site: http://www.anytun.org/
-
-
-COPYING
--------
-
-Copyright \(C) 2007-2009 Othmar Gsenger, Erwin Nindl and Christian
-Pointner. This  program is  free software: you can redistribute it 
-and/or modify it under the terms of the GNU General Public License 
-as published by the Free Software Foundation, either version 3 of 
-the License, or any later version.
-