cleaned up manpages

1 files changed, 15 insertions, 15 deletions

diff --git a/doc/anytun-controld.8 b/doc/anytun-controld.8
index 6151363..cfcdf41 100644
--- a/doc/anytun-controld.8
+++ b/doc/anytun-controld.8
@@ -2,12 +2,12 @@
 .\"     Title: anytun-controld
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.1 <http://docbook.sf.net/>
-.\"      Date: 01/15/2010
+.\"      Date: 02/11/2010
 .\"    Manual: anytun-controld user manual
 .\"    Source: anytun trunk
 .\"  Language: English
 .\"
-.TH "ANYTUN\-CONTROLD" "8" "01/15/2010" "anytun trunk" "anytun-controld user manual"
+.TH "ANYTUN\-CONTROLD" "8" "02/11/2010" "anytun trunk" "anytun-controld user manual"
 .\" -----------------------------------------------------------------
 .\" * set default formatting
 .\" -----------------------------------------------------------------
@@ -47,56 +47,56 @@ This option instructs
 to run in foreground instead of becoming a daemon which is the default\&.
 .RE
 .PP
-\fB\-u, \-\-username <username>\fR
+\fB\-u, \-\-username \fR\fB\fI<username>\fR\fR
 .RS 4
 run as this user\&. If no group is specified (\fB\-g\fR) the default group of the user is used\&. The default is to not drop privileges\&.
 .RE
 .PP
-\fB\-g, \-\-groupname <groupname>\fR
+\fB\-g, \-\-groupname \fR\fB\fI<groupname>\fR\fR
 .RS 4
 run as this group\&. If no username is specified (\fB\-u\fR) this gets ignored\&. The default is to not drop privileges\&.
 .RE
 .PP
-\fB\-C, \-\-chroot <path>\fR
+\fB\-C, \-\-chroot \fR\fB\fI<path>\fR\fR
 .RS 4
 Instruct
 \fBanytun\-controld\fR
 to run in a chroot jail\&. The default is to not run in chroot\&.
 .RE
 .PP
-\fB\-P, \-\-write\-pid <filename>\fR
+\fB\-P, \-\-write\-pid \fR\fB\fI<filename>\fR\fR
 .RS 4
 Instruct
 \fBanytun\-controld\fR
 to write it\(cqs pid to this file\&. The default is to not create a pid file\&.
 .RE
 .PP
-\fB\-L, \-\-log <target>:<level>[,<param1>[,<param2>[\&.\&.]]]\fR
+\fB\-L, \-\-log \fR\fB\fI<target>:<level>[,<param1>[,<param2>[\&.\&.]]]\fR\fR
 .RS 4
 add log target to logging system\&. This can be invoked several times in order to log to different targets at the same time\&. Every target hast its own log level which is a number between 0 and 5\&. Where 0 means disabling log and 5 means debug messages are enabled\&.
 
 The file target can be used more the once with different levels\&. If no target is provided at the command line a single target with the config
-\fBsyslog:3,anytun\-controld,daemon\fR
+\fIsyslog:3,anytun\-controld,daemon\fR
 is added\&.
 
 The following targets are supported:
 .PP
-\fBsyslog\fR
+\fIsyslog\fR
 .RS 4
 log to syslog daemon, parameters <level>[,<logname>[,<facility>]]
 .RE
 .PP
-\fBfile\fR
+\fIfile\fR
 .RS 4
 log to file, parameters <level>[,<path>]
 .RE
 .PP
-\fBstdout\fR
+\fIstdout\fR
 .RS 4
 log to standard output, parameters <level>
 .RE
 .PP
-\fBstderr\fR
+\fIstderr\fR
 .RS 4
 log to standard error, parameters <level>
 .RE
@@ -109,16 +109,16 @@ This option instructs
 to run in debug mode\&. It implicits
 \fB\-D\fR
 (don\(cqt daemonize) and adds a log target with the configuration
-\fBstdout:5\fR
+\fIstdout:5\fR
 (logging with maximum level)\&. In future releases there might be additional output when this option is supplied\&.
 .RE
 .PP
-\fB\-f, \-\-file <path>\fR
+\fB\-f, \-\-file \fR\fB\fI<path>\fR\fR
 .RS 4
 The path to the file which holds the sync information\&.
 .RE
 .PP
-\fB\-X, \-\-control\-host <hostname|ip>[:<port>]\fR
+\fB\-X, \-\-control\-host \fR\fB\fI<hostname|ip>[:<port>]\fR\fR
 .RS 4
 fetch the config from this host\&. The default is not to use a control host and therefore this is empty\&. Mind that the port can be omitted in which case port 2323 is used\&. If you want to specify an ipv6 address and a port you have to use [ and ] to separate the address from the port, eg\&.: [::1]:1234\&. If you want to use the default port [ and ] can be omitted\&.
 .RE