moved rf433send to realraum github repo

2 files changed, 0 insertions, 280 deletions

diff --git a/rf433send/Makefile b/rf433send/Makefile
deleted file mode 100644
index 068bd34..0000000
--- a/rf433send/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-##

-##  spreadspace avr utils

-##

-##

-##  Copyright (C) 2013-2014 Christian Pointner <equinox@spreadspace.org>

-##                     Othmar Gsenger <otti@gsenger.com>

-##

-##  This file is part of spreadspace avr utils.

-##

-##  spreadspace avr utils is free software: you can redistribute it and/or modify

-##  it under the terms of the GNU General Public License as published by

-##  the Free Software Foundation, either version 3 of the License, or

-##  any later version.

-##

-##  spreadspace avr utils is distributed in the hope that it will be useful,

-##  but WITHOUT ANY WARRANTY; without even the implied warranty of

-##  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-##  GNU General Public License for more details.

-##

-##  You should have received a copy of the GNU General Public License

-##  along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.

-##

-

-NAME := rf433send

-BOARD_TYPE := teensy2

-OBJ := $(NAME).o

-LIBS := util led lufa-descriptor-usbserial usbio

-EXTERNAL_LIBS := lufa

-SPREADAVR_PATH := ..

-RESET_FUNC := $(SPREADAVR_PATH)/tools/reset_lufa_cdc

-RESET_PARAM := 'r'

-

-LUFA_PATH := $(SPREADAVR_PATH)/contrib/LUFA-120219

-LUFA_OPTS  = -D USB_DEVICE_ONLY

-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0

-LUFA_OPTS += -D ORDERED_EP_CONFIG

-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8

-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1

-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT

-

-LUFA_OPTS += -D USB_MANUFACTURER="L\"otti\"" -D USB_MANUFACTURER_LEN=4

-LUFA_OPTS += -D USB_PRODUCT="L\"realraum RF433 controller\"" -D USB_PRODUCT_LEN=25

-

-LUFA_COMPONENTS := USB USBCLASS

-

-include $(SPREADAVR_PATH)/include.mk

diff --git a/rf433send/rf433send.c b/rf433send/rf433send.c
deleted file mode 100644
index f83027f..0000000
--- a/rf433send/rf433send.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*

- *  spreadspace avr utils

- *

- *

- *  Copyright (C) 2013-2014 Christian Pointner <equinox@spreadspace.org>

- *                     Othmar Gsenger <otti@gsenger.com>

- *

- *  This file is part of spreadspace avr utils.

- *

- *  spreadspace avr utils is free software: you can redistribute it and/or modify

- *  it under the terms of the GNU General Public License as published by

- *  the Free Software Foundation, either version 3 of the License, or

- *  any later version.

- *

- *  spreadspace avr utils is distributed in the hope that it will be useful,

- *  but WITHOUT ANY WARRANTY; without even the implied warranty of

- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- *  GNU General Public License for more details.

- *

- *  You should have received a copy of the GNU General Public License

- *  along with spreadspace avr utils. If not, see <http://www.gnu.org/licenses/>.

- */

-

-

-#include <avr/io.h>

-#include <avr/wdt.h>

-#include <avr/interrupt.h>

-#include <avr/power.h>

-#include <stdio.h>

-

-#include "util.h"

-#include "led.h"

-#include "usbio.h"

-

-/*

-  this program listens on a usb serial/acm interface. When the send command ('s') 

-  is received the send buffer gets filled with the next 3 bytes. These bites are

-  sent out serialized to a specified port using PWM. Before the data is sent, a

-  sync bit is sent. The data is repeated multiple times.

-

-  This version of the program is optimized for 433MHz radio controlled power plugs.

-  To control them you need to add a ASK modulator to the output pin (default F0).

-*/

-

-// RF433 Sender is Connected to PF0

-#define SEND_PORT PORTF

-#define SEND_DDR DDRF

-#define SEND_SERIAL 0

-// Logical Zero (Sender turned off) is when output is low

-#define SEND_ZERO 1

-// rf433 command length is 3 bytes

-#define SEND_CMD_LENGTH 3

-// pwm is SEND_PWM_BASE timers high and SEND_PWN_LONG_MULT * SEND_PWM_BASE timers low for a low bit (low bit = low is longer)

-#define SEND_PWM_BASE 1

-#define SEND_PWN_LONG_MULT 3

-#define SEND_PWN_SYNC_MULT 31

-

-//bits are read LSB from first byte first

-#define SEND_CURRENT_BIT (send_cmd_buffer[send_cmd_buffer_bit_pos/8] & (1<< (send_cmd_buffer_bit_pos % 8 )))

-

-static char send_cmd_buffer[SEND_CMD_LENGTH];

-static int8_t send_cmd_buffer_bit_pos=0;

-static uint8_t send_pwm_remain=0;

-static uint8_t send_pwm_output=0;

-static uint8_t send_repeat=0;

-static uint8_t send_sync=0;

-

-

-

-static inline void sender_on(void)

-{

-  if(SEND_ZERO)

-    SEND_PORT |= (1 << SEND_SERIAL);

-  else  

-    SEND_PORT &= ~(1 << SEND_SERIAL);

-  send_pwm_output=1;

-}

-

-static inline void sender_off(void)

-{

-  if(SEND_ZERO)

-    SEND_PORT &= ~(1 << SEND_SERIAL);

-  else  

-    SEND_PORT |= (1 << SEND_SERIAL);

-  send_pwm_output=0;

-}

-

-inline void sender_toggle(void)

-{

-  SEND_PORT ^= (1 << SEND_SERIAL);

-}

-

-void sender_timer_enable(void)

-{

-    TCCR0A = 1<<WGM01;

-    OCR0A = 22;        // (1+17)*16us = 352us

-    TCCR0B = 1<<CS02 | 0<<CS01| 0<<CS00;   //Teiler 256

-    TCNT0 = 0;

-    TIMSK0 |= (1<<OCIE0A);

-}

-

-inline void sender_timer_disable(void)

-{

-    TCCR0B =0;

-    TIMSK0 &= ~(1<<OCIE0A);

-}

-

-inline uint8_t sender_timer_status(void)

-{

-  return (TIMSK0 & (1<<OCIE0A))>>OCIE0A;

-}

-

-ISR(TIMER0_COMPA_vect)

-{

-  PORTF^=2; //debug;

-  if(send_cmd_buffer_bit_pos < SEND_CMD_LENGTH * 8) {

-    if(send_pwm_remain)

-    {

-      //NOTHING

-    } else if (send_sync) {

-      sender_off();

-      send_pwm_remain=SEND_PWM_BASE*SEND_PWN_SYNC_MULT;

-      send_sync=0;

-      send_cmd_buffer_bit_pos=-1;

-    } else if (send_pwm_output) {

-      sender_off();

-      if(SEND_CURRENT_BIT)

-      {

-        send_pwm_remain=SEND_PWM_BASE;

-      } else {

-        send_pwm_remain=SEND_PWM_BASE*SEND_PWN_LONG_MULT;

-      }

-    } else {

-      send_cmd_buffer_bit_pos++;

-      sender_on();

-      if(SEND_CURRENT_BIT)

-      {

-        send_pwm_remain=SEND_PWM_BASE*SEND_PWN_LONG_MULT;

-      } else {

-        send_pwm_remain=SEND_PWM_BASE;

-      }

-    }

-    send_pwm_remain--;

-  } else {

-    send_cmd_buffer_bit_pos=0;

-    send_pwm_remain=0;

-    if(send_repeat)

-    {

-      send_repeat--;

-      send_sync=1;

-      send_pwm_remain=SEND_PWM_BASE;

-      sender_on();

-    } else {

-      sender_timer_disable();

-      sender_off();

-    }  

-  }  

-}

-

-void pins_init(void)

-{ 

-    sender_off();

-    SEND_DDR |= 1 << SEND_SERIAL;

-    DDRF |= 2; //DEBUG

-}

-

-void timer_init(void)

-{

-}

-

-static uint8_t command_pos=0;

-

-void handle_cmd(uint8_t cmd)

-{

-  if (!command_pos)

-  {

-    switch(cmd) {

-    case '0': led_off(); break;

-    case '1': led_on(); break;

-    case 't': led_toggle(); break;

-    case 'r': reset2bootloader(); break;

-    case 's': 

-      printf("Expecting multibyte command now\n\r");

-      command_pos=1;

-      break;

-    default: printf("error\n\r"); return;

-    }

-    printf("ok\n\r");

-  } else {

-    send_cmd_buffer[command_pos-1]=cmd;

-    if (command_pos==SEND_CMD_LENGTH)

-    {

-      printf("Enabling Timer\n\r");

-      command_pos=0;

-      send_sync=1;

-      send_pwm_remain=SEND_PWM_BASE;

-      send_repeat=15;

-      sender_on();

-      sender_timer_enable();

-    }

-    else  

-      command_pos++;

-  }

-}

-

-

-

-int main(void)

-{

-  MCUSR &= ~(1 << WDRF);

-  wdt_disable();

-

-  cpu_init();

-  led_init();

-  usbio_init();

-  pins_init();

-  timer_init();

-  sei();

-

-  for(;;) {

-    int16_t BytesReceived = usbio_bytes_received();

-    while(BytesReceived > 0) {

-      int16_t ReceivedByte = fgetc(stdin);

-      if(ReceivedByte != EOF) {

-        handle_cmd(ReceivedByte);

-      }

-      BytesReceived--;

-    }

-

-    usbio_task();

-  }

-}